首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 609 毫秒
1.
根据几种不同情形探讨复合模拟中如何通过数值模拟为潮流物模试验提供开边界控制条件。对单边界物理模型,可由数模的调和常数得到物模边界控制所需的时间序列数据,实现单分潮、多分潮及大、中、小潮的模拟;对于历时较长的试验,可由数模得到长时间序列或周期性序列数据作为生潮的控制信号;对多边界模型,沿边界分为若干控制断面,由数模给出各断面的流量变化,对各断面分别进行流量控制;差时的复合模拟可使物理模型和数值模型互相提供边界条件或模型参数修正。  相似文献   

2.
Semidiurnal tides, and especially the lunar tide M2, are dominant dynamics in the Bay of Biscay. Strong tidal currents are associated with the presence of a significant continental slope. By combining Newton's gravitation laws and Euler's equations, Laplace's equations contain the astronomical forcing responsible for the observed semidiurnal tides. In shallow waters, this direct forcing is often neglected. We study here its influence on the tidal dynamics over the continental slope through the development of a simple model describing the barotropic semidiurnal dynamics on a transect perpendicular to the slope. This new model results from the combination of two different models, i.e. the one developed by Rosenfeld and Beardsley (1987), which takes into account the tide-generating force, and that of Battisti and Clarke (1982), which neglects it. A first model is developed by neglecting the direct astronomical forcing in equations: it consists in solving a second-order homogeneous propagation equation for the barotropic semidiurnal tide and needs only coastal conditions as well as the knowledge of the along-slope wave number of the solution. For a mean slope typical of the South Brittany area, this non-forced model provides results in accordance with those of Battisti and Clarke and Le Cann (1990): in particular, in the upper part of the slope, it shows a polarization inversion of tidal ellipses characteristic of the tidal dynamics observed in this area. Then, the direct astronomical forcing is kept in equations. The simple model developed without this forcing is fitted in order to solve the resulting forced propagation equation for the barotropic tide. The solution of this second model is the sum of a forced wave responding to the direct astronomical forcing and of a free wave generated at the coastal boundary. Under the same boundary conditions, the results obtained with the influence of the tide-generating force are then compared with those obtained without it. This comparison allows one to apprehend the importance of the direct astronomical forcing on tidal dynamics across the slope: in particular, the main difference appears in deep waters where this forcing induces a phase-lag between the plain and the shelf for the sea-surface slope.  相似文献   

3.
潮致混合对海洋环流的调整起着重要作用。陆架环流的数值模拟中如果不考虑潮汐作用,往往不能得到与观测相符的垂向温盐结构。本文基于调和分析方法,建立了一套潮致混合参数化方案。该方案通过对垂向混合系数进行调和分析,从而得到随时间变化的潮致混合系数。将该方案用于黄海冷水团数值模拟的结果显示,其能够得到与在数值模式开边界直接加入潮汐强迫相当的冷水团温盐结构。和直接引入潮汐强迫相比,这一潮致混合参数化方案的优势在于,它能够大大节省数值模拟计算机时,因此有望显著提高大规模高分辨率的海洋环流及气候模式的模拟能力和计算效率。  相似文献   

4.
In the paper two types of numerical models – a lumped-parameter model and a high-resolution two-dimensional hydrodynamic model – are used to analyse the response of a system of partially-connected tidal basins to inhomogeneous open sea forcing. The equations of the lumped-parameter model, suitable for an arbitrary number of basins with sloping walls, are formulated based on one-dimensional continuity and momentum equations. Numerical solutions to the equations are thoroughly examined, showing the influence of inhomogeneous open sea forcing and of geometrical parameters of the basins on the tidal range and the water transport through the system, with particular emphasis given to inter-basin water exchange and cumulative water transport through basins boundaries. The results of the lumped-parameter model simulations for the tidal basins of the German Wadden Sea are successfully compared with the results of calculations with the two-dimensional hydrodynamic model, which is used to investigate in more detail circulation patterns and the influence of specific local features of inlet bathymetry on the hydrodynamic processes in the study area. The influence of wind on the basins response is discussed as well.  相似文献   

5.
The tidal current in Kagoshima Bay is simulated by the two-dimensional subdomain finite-element method. At the open boundary, the sea level is forced to be oscillatory with a linear combination of the four harmonic constituents (M2, S2, K1, O1) of the tide. A calculation having only M2 sea level at the open boundary is also performed and the harmonic constants of M2 are compared with those calculated by the four components.In the calculated velocity vector, a large difference between the two maxima or the two minima in one day appears when the vector is directed to the open sea. On the other hand, when it is directed into the bay, the two extreme velocities are almost equal. In tide-killer residual flow, the flow pattern is almost independent of the tidal age; however, the absolute value of the current velocity depends on the tidal age. The pattern is nearly the same as that calculated by giving only M2 sea level at the open boundary.In relation to the nonlinear interaction, the kinetic energy ratio KER is defined by the ratio of kinetic energy of the induced harmonic components to that of harmonic constituents given at the open boundary. KER is large where the tidal current is disturbed by obstacles,e.g. along the west coast at the mouth of the bay and in the southern sea of Mt. Sakurajima. The distribution of KER seems to be independent of the number of harmonic constituents (one or four) given at the open boundary. The difference of kinetic energy of the M2 tidal constituent between the two calculations.i.e. with the open boundary conditions of four components (M2, S2, K1, O1) and of a single component (M2), is found to be large where the current velocity is large.  相似文献   

6.
Bias errors, resulting from inaccurate boundary and forcing conditions, incorrect model parameterization, etc. are a common problem in environmental models including biogeochemical ocean models. While it is important to correct bias errors wherever possible, it is unlikely that any environmental model will ever be entirely free of such errors. Hence, methods for bias reduction are necessary. A widely used technique for online bias reduction is nudging, where simulated fields are continuously forced toward observations or a climatology. Nudging is robust and easy to implement, but suppresses high-frequency variability and introduces artificial phase shifts. As a solution to this problem Thompson et al. (2006) introduced frequency dependent nudging where nudging occurs only in prescribed frequency bands, typically centered on the mean and the annual cycle. They showed this method to be effective for eddy resolving ocean circulation models. Here we add a stability term to the previous form of frequency dependent nudging which makes the method more robust for non-linear biological models. Then we assess the utility of frequency dependent nudging for biological models by first applying the method to a simple predator–prey model and then to a 1D ocean biogeochemical model. In both cases we only nudge in two frequency bands centered on the mean and the annual cycle, and then assess how well the variability in higher frequency bands is recovered. We evaluate the effectiveness of frequency dependent nudging in comparison to conventional nudging and find significant improvements with the former.  相似文献   

7.
A two-dimensional hydrodynamic model application to the San Francisco Bay was performed using the Boundary-Fitted HYDROdynamic model (BFHYDRO). The model forcing functions consist of tidal elevations along the open boundary and fresh water flows from the Delta Outflow. The model-predicted surface elevations compare well with the observed surface elevations at five stations in San Francisco Bay. Mean error in the model predicted surface elevations and currents are less than 7 and 9%, respectively. Correlation coefficients for surface elevations and currents are higher than 0.94 and 0.95, respectively. The amplitudes and phases of the principal tidal constituents at 24 tidal stations in San Francisco Bay, obtained from a harmonic analysis of a 90-day simulation compare well with the observed data. The predicted amplitude and phase of the M2 tidal constituent at these stations are respectively within 8 cm and 8° of the observed data. Maximum errors in the K1 harmonic amplitudes and phases are less than 3 cm and 7° respectively. The asymmetric diurnal and semi-diurnal tidal ranges and spring and neap tidal cycles of the surface elevations and currents are well reproduced in the model at all stations.  相似文献   

8.
Tidal levels and currents in the Tongan region of the Pacific were simulated using a two-dimensional frequency-domain finite element model. The eight major diurnal and semidiurnal tidal constituents were modeled successfully, using open boundary conditions taken from a global tidal model based on the Topex/Poseidon satellite altimeter. Comparison of model results with observations from the single tide gauge site in the area were later used to adjust the boundary conditions. The validity of omitting horizontal eddy viscosity from the finite element model was checked by running an equivalent finite difference model. The results show that although the submarine Tongan ridge does not appear to trap tidal energy, there are residual tidal currents and possible recirculations which are capable of influencing biological productivity around Tonga. The model results are reduced to a simple method for predicting tidal heights in outlying areas, based only on the tidal calendar for the capital, Nuku'alofa.  相似文献   

9.
《Journal of Sea Research》2002,47(3-4):223-238
Dissipation rate measurements in the northern North Sea from two independent observations are compared with various numerical models. The turbulence was characterised by tidal forcing in the bottom boundary layer and atmospheric forcing in the surface boundary layer. The observations were carried out by using free-falling profilers equipped with shear probes and fast CTD sensors. The models are based on Reynolds averaging and range from simple one-equation models to two-equation models with algebraic second-moment closures. Several error measures are applied for comparison of observations and model results. It is shown that the differences between the two observations are significantly larger than the equivalent measures between the model results. This is caused by the stochastic character of turbulent microstructure in connection with under-sampling, but also by the distance between the two observational sites, the movements of the vessels, instrument errors and so forth. The models on the other hand, although closed on different levels, are all based on the same assumptions and driven by the same external forcing, thus showing only relatively small differences between each other.  相似文献   

10.
Tidal levels and currents in the Tongan region of the Pacific were simulated using a two-dimensional frequency-domain finite element model. The eight major diurnal and semidiurnal tidal constituents were modeled successfully, using open boundary conditions taken from a global tidal model based on the Topex/Poseidon satellite altimeter. Comparison of model results with observations from the single tide gauge site in the area were later used to adjust the boundary conditions. The validity of omitting horizontal eddy viscosity from the finite element model was checked by running an equivalent finite difference model. The results show that although the submarine Tongan ridge does not appear to trap tidal energy, there are residual tidal currents and possible recirculations which are capable of influencing biological productivity around Tonga. The model results are reduced to a simple method for predicting tidal heights in outlying areas, based only on the tidal calendar for the capital, Nuku'alofa.  相似文献   

11.
引潮力对海洋环流模式的影响   总被引:2,自引:1,他引:1  
The eight main tidal constituents have been implemented in the global ocean general circulation model with approximate 1° horizontal resolution.Compared with the observation data,the patterns of the tidal amplitudes and phases had been simulated fairly well.The responses of mean circulation,temperature and salinity are further investigated in the global sense.When implementing the tidal forcing,wind-driven circulations are reduced,especially those in coastal regions.It is also found that the upper cell transport of the Atlantic meridional overturning circulation(AMOC) reduces significantly,while its deep cell transport is slightly enhanced from 9×106m3/s to 10×106 m3/s.The changes of circulations are all related to the increase of a bottom friction and a vertical viscosity due to the tidal forcing.The temperature and salinity of the model are also significantly affected by the tidal forcing through the enhanced bottom friction,mixing and the changes in mean circulation.The largest changes occur in the coastal regions,where the water is cooled and freshened.In the open ocean,the changes are divided into three layers:cooled and freshened on the surface and below 3 000 m,and warmed and salted in the middle in the open ocean.In the upper two layers,the changes are mainly caused by the enhanced mixing,as warm and salty water sinks and cold and fresh water rises;whereas in the deep layer,the enhancement of the deep overturning circulation accounts for the cold and fresh changes in the deep ocean.  相似文献   

12.
Bridge scour modeling requires storm surge hydrographs as open ocean boundary conditions for coastal waters surrounding tidal inlets. These open coast storm surge hydrographs are used to accurately determine both horizontal and vertical circulation patterns, and thus scour, within the inlet and bay for an extreme event. At present, very little information is available on the effect that tidal inlets have on these open coast storm surge hydrographs. Furthermore, current modeling practice enforces a single design hydrograph along the open coast boundary for bridge scour models. This study expands on these concepts and provides a more fundamental understanding on both of these modeling areas.  相似文献   

13.
The development of a theoretical model for estimating bottom boundary layer characteristics in the Hooghly estuary, located in the east coast of India, under combined effects of waves and currents is reported. Three numerical models, viz a depth averaged hydrodynamic model, SWAN wave model, and bottom boundary layer model, were integrated. In the bottom boundary layer parameters, maximum bottom stress, effective friction factor, and near-bed velocity both during ebb and flood phases of the tidal forcing are investigated and validated for the Haldia channel. The close match seen from results signifies applicability of this model for entire Hooghly basin.  相似文献   

14.
大规模多岛屿海域潮流场的数值模拟   总被引:6,自引:0,他引:6  
本文提出了一种系统地分析大规模多岛屿海域潮流场的数值模拟方法,以及只有有限代表点位的计算区域内的潮汐和潮流资料的分析方法。建立了适用于复杂的多岛屿海域上平面二维潮波数值计算模型的选择及网格自动剖分方法。通过对长海县长山群岛海域潮流场的模拟,验证了此方法在计算规模大而又要求局部分辨率高的潮流场时,该方法效率高,经济合理,灵活方便。  相似文献   

15.
黄海、渤海TOPEX/Poseidon高度计资料潮汐伴随同化   总被引:1,自引:0,他引:1  
首先将大约10a的TOPEX/Poseidon(T/P)高度计资料沿星下轨迹点做潮汐调和分析,提取得到各分潮的调和常数,利用伴随同化方法,同化到二维非线性潮汐数值模式中,模拟了黄海、渤海区域M2,S2,O1,K1等4个潮汐分潮,并根据计算结果给出了各分潮的同潮图.将计算值与观测值的进行偏差统计,结果表明计算值与验潮站资料符合良好.研究过程中做了两类试验:一类试验是针对不同的参数进行优化,一类试验是针对不同的资料进行同化.第一类试验表明:将开边界条件和底摩擦系数同时作为模型优化的控制参数,其结果明显优于单独优化开边界条件;第二类试验表明:同时同化高度计资料与验潮站资料,比单独同化其中任一种资料,对模式计算结果都有较好的改进.研究结果表明,采用伴随同化方法,利用T/P高度计资料和验潮站资料作为同化数据能有效改进模拟结果,用来反演黄海、渤海的潮波系统是可行的.  相似文献   

16.
A variational inverse data assimilation scheme is developed to estimate the salinity boundary conditions in a three-dimensional tidal hydrodynamic and salinity transport model. In this paper, the maximum incoming salinity value and the recovery time from the outflow salinity to the maximum incoming salinity at model open boundaries are treated as poorly known model control variables, and estimated using a variational inverse data assimilation scheme. The variational inverse model is tested in an idealized estuary using identical twin experiments, in which observed data are generated from the same model. Model tests with different initial guesses of the model control variables are conducted to evaluate the capability of the inverse model. A penalty technique is used to eliminate oscillations in the solution during the minimization process. The effects of preconditioning and penalty terms on the convergence rate are investigated. Model results demonstrate that the variational inverse model can be used to efficiently determine the optimal salinity open boundary conditions and improve the model state when there are no observed data available to specify the proper salinity open boundary conditions in a tidal model.  相似文献   

17.
In multiresolution analysis(MRA)by wavelet function Daubechies(db),we decompose the signal to two parts,the low and high frequency content.The high-frequency content of the data is removed first and a new "de-noise" signal is reconstructed by using inverse wavelet transform.The wavelet spectrum and harmonic analysis were used to analyze the characteristics of tidal data before constructing the input and output structure of ANN model.That is,the concept of tidal constituent phase-lags was introduced and the new "de-noise" signal was used as the input data set of ANN and the forecasting accuracy of ANN model is significantly improved.  相似文献   

18.
Tidal data inversion: interpolation and inference   总被引:1,自引:0,他引:1  
Initial efforts in applying inverse methods to studies of ocean tides have focused on making the best use of a small number of observations to map tidal fields in a large area. As such, inversion can be viewed as an objective analysis scheme which uses a dynamically appropriate spatial covariance, derived from the shallow water equations, to interpolate and smooth a sparse data set. Data from recent altimetry missions are not sparsely distributed relative to tidal wavelengths in the open ocean, apparently reducing the need for complicated dynamically based interpolation schemes. Altimetric data sets are also quite large, making application of rigorous inversion methods to global tidal modeling a challenging computational problem. We describe here a new iterative solution scheme which allows us for the first time to fit the full set of TOPEX/Poseidon cross-over differences. The resulting solution (TPXO.3) fits validation tide gauges significantly better than previous inverse solutions. TPXO.3 also reduces residual cross-over variances relative to other recent inverse and empirical solutions, particularly in shallow water where improvements are dramatic. With the new solution approach very significant improvements in global tidal models should be possible in shallow areas and in the vicinity of complex bathymetry, where high-accuracy tidal modeling remains a challenging problem. With the recent improvements in the definition of tidal elevations in the open ocean it should now also be possible to resolve some long unanswered questions about tidal energetics and dynamics. Inverse methods provide a natural framework for addressing these issues, and making inferences about tidal dynamics. In particular, by bringing data and dynamics together in a single solution, we can rigorously test the consistency of the two. We present results of global and local inversions which suggest that over elongated bathymetric features oriented perpendicular to tidal flows, energy dissipation in the open ocean is significantly enhanced, presumably due to conversion of barotropic tidal motions into baroclinic modes. For the M2 tide our preliminary results suggest that perhaps as much as 0.5 TW of energy is dissipated in this manner. However, due to the simplified linear dynamics and limited spatial resolution used for our inversion, there are significant uncertainties associated with these results. A more careful application of inverse methods to make more rigorous inferences about tidal energetics, including use of more reasonable prior dynamics, and the highest possible spatial resolution, should allow for closure of the tidal energy budget within the next few years.  相似文献   

19.
基于POM模式,采用第一类水位、流速和Flather(1976)3种开边界条件,模拟了东海的M2分潮.结果表明,在这3种开边界条件下,均能成功地模拟M2分潮的传播特征,以及在该海区内的三个半无潮点.计算结果与实测的较吻合,并且在Flather开边界条件下,模拟的振幅和迟角与实测资料的偏差分别为5.62cm和7.90°,效果最好.这也说明Flather开边界条件是潮汐模拟当中较可取的一种开边界条件.  相似文献   

20.
The flow relaxation scheme (FRS) is tested as an open boundary condition (OBC). This scheme was originally designed to relax external solutions (ES) from a large area model towards solutions in a limited area model with a fine mesh. When one uses the FRS as a pure OBC; i.e. the ES are unknown and set equal to zero, the FRS method degenerates to a sponge type OBC. Since a sponge type OBC does not work well in all cases, for instance in the case of an alongshore uniform wind; Chapman (1985) and Røed and Cooper (1987), we introduced local wind induced solutions as a part of the ES.When we also included the tide in the ES, the tests showed that the FRS method handled the tidal input problem very well. Even in the case where noise was added to the tide in the ES, the results were good.The major drawbacks for the FRS method are the required extention of the computer-space and -time.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号