首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 656 毫秒
1.
Dextral-slip in the Nyainqêntanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The east-west dextral-slip Gangdise fault system merges eastward into the north into the dextral-slip North Damxung shear zone and Jiali faults. These faults were took shape system in 18.3-11.0 Ma as the western block drove under the eastern one. The dextral-slip movement ended at ~11 Ma and the batholith rose, as marked by gravitational shearing at 8.6-8.3 Ma, and a new fault system developed. Northwest-trending dextral-slip faults formed to the northwest of the raisen batholith, whereas the northeast-trending South Damxung thrust faults with some sinistral-slip formed to the southeast. The latter are replaced farther to the east by the west-northwest-trending Miocene deposits preserved was followed by a regional uplift and the initiation of a system of generally north-south grabens in the Late Miocene at ~6.5 Ma. The regional uplift of the southern Tibetan Plateau thus appears to have occurred between 8.3 Ma and 6.5 Ma. The Gulu, Damxungcontrolled by the earlier northeast-trending faults. These grabens dominate the subsequent tectonic movement and are still very active as northwest-trending dextral-slip faults northwest of the mountains. The Miocene is a time of great tectonic change that ushered in the modern tectonic regime.  相似文献   

2.
The well-known Pliocene to Quaternary Rio Grande rift of northern New Mexico and southern Colorado is distinctly different from the Miocene rift, especially in structural style. Prior to approximately 21 Ma, there was little extension or rift-basin development. Uppermost Oligocene and Lower Miocene strata were deposited as broad volcaniclastic aprons, with no significant evidence of syn-depositional faulting, in contrast to younger deposits. The only documented areas of extensional faulting and stratal rotation older than 21 Ma occur within or close to magmatic centers. Early rift basins (21-10 Ma) developed as half grabens progressively tilted in hanging walls of normal faults that primarily reactivated Laramide (Eocene) reverse faults: (1) the San Luis basin tilted eastward as the Sangre de Cristo normal fault reactivated westward-dipping Laramide reverse faults; (2) the Tesuque basin tilted westward as normal faults reactivated eastward-dipping Laramide reverse faults of Sierra Nacimiento and related features; and (3) the Belen basin experienced complex tilting as diverse normal faults reactivated variably dipping Laramide reverse faults. Some of these early-rift faults remain active, whereas others became inactive starting near 10 Ma, as new faults broke across Laramide and early-rift features. The Embudo transfer zone linked normal faults along the east side of the San Luis basin to the Pajarito, La Bajada, San Francisco, and Rincon fault zones at this time. Normal faults along the northwest side of the Miocene Tesuque basin became inactive at the same time that rapid uplift of the Sandia Mountains as a footwall block began at about 10 Ma. This shifting of normal-fault activity resulted in reversal of tilt direction from westward for the Miocene Tesuque basin to eastward for the modern Albuquerque basin. Uplift and erosion of early-rift deposits along the northwest side of the Albuquerque basin have resulted.

This two-stage model for evolution of the Rio Grande rift in north-central New Mexico and southern Colorado is fundamentally different from previous two-stage models, which described Oligo-Miocene volcaniclastic aprons as “early rift deposits,” and related them to extensional structures. Rather, development of half grabens began around 21 Ma, with dominance of negative inversion of Laramide reverse and thrust faults. Regional change in extension direction led to the abandonment of some faults and the initiation of new faults at 10-8 Ma in the Rio Grande rift. The biggest change occurred in the Tesuque basin, as the western boundary fault became inactive during growth of the Jemez volcanic field, and the Sandia Mountains began their rapid rise as the northern Albuquerque basin tilted to the east. Continued regional uplift, and integration and incision of the Rio Grande and tributaries, have occurred during the last 5 million years, with the course of the river tending to follow the downdropped side of each modern half graben.  相似文献   

3.
The tectonic inversion of the Songliao Basin during the Oligo–Miocene may have played an important role in controlling the development of sandstone-type uranium deposits (SUDs). Here we investigate drill holes along a southeast to northwest section in this basin based on apatite fission-track (AFT) and zircon fission-track (ZFT) techniques. We present 50 data from 15 deep boreholes at different depths between 665 and 3956 m and different structural units including grabens and horsts formed in the Early Cretaceous beneath the basin. The results of the effective AFT ages are 100 ± 11 to 2.3 ± 0.4 Ma (P(x2) > 5%) and ZFT ages are 97.5–20.4 Ma (including binomial peak ages). These results reveal that the basin underwent two distinct stages of rapid cooling after Late Cretaceous. In the first stage, during the Late Cretaceous–Early Paleogene (~80–50 Ma), tectonic uplift occurred in all of the structural units including grabens and horsts, which was marked by an unconformity between the latest Cretaceous Mingshui and the Eocene Yi'an formations. In the second stage, during the Oligo–Miocene (~40–10 Ma), tectonic uplift occurred mainly in the grabens but not in the horsts, corresponding with a few sediments of the Neogene Da'an and Taikang formations. We propose that the folds and the thrust faults mostly characterize in the second stage indicating a major tectonic inversion in the basin. The shifting of the two stages was probably in response to differences in the subduction angles and directions of motion of the Paleo-Pacific Plate from the southeast. Combined with previous information, it was demonstrated that most of the U mineralization ages are younger than 40 Ma, with a peak in the Miocene or later (<20 Ma). We thus propose that the SUDs have been redistributed and redeposited locally in successive stages during and after the Oligo–Miocene tectonic inversion.  相似文献   

4.
结合区域构造地质背景,采用现今构造静态描述与构造演化过程剖析相结合的研究思路,分析了车排子凸起的几何学与运动学特征,剖析了车排子凸起的构造演化过程,探究了构造演化过程控制下不同类型断层的形成机制.结果表明:车排子凸起之上发育两套断裂系统,即海西印支期形成的断穿石炭系白垩系底的逆断层,喜马拉雅期形成的断穿白垩系、古近系和新近系的正断层.车排子凸起构造演化过程可以划分为强烈隆升剥蚀阶段(C3J)、缓慢沉降阶段(KE)、局部伸展阶段(NQ)3个阶段,这3个阶段的构造应力背景具有差异性,导致不同阶段形成的断裂体系和地层厚度差异性明显.C3J时期,车排子凸起处于向东推覆的逆冲褶皱带上,发育向东逆冲的红车断裂带和断穿石炭系白垩系底的逆断层,无地层沉积;KE时期,红车断裂带的右旋压扭活动使车排子凸起处于逆冲楔顶部带,受北东向挤压,先期逆断层有的继承性持续发育,有的停止发育,还有的发育一段时间后停止发育,并形成盲冲断层,地层从南东向北西沉积尖灭;NQ时期,北天山向北强烈挤压隆升的作用使车排子凸起处于前缘隆起带,一些逆断层发生负反转,同时在NQ发育大量正断层,受凸起向南倾作用,地层南厚北薄.  相似文献   

5.
柯坪塔格推覆构造几何学、运动学及其构造演化   总被引:29,自引:1,他引:29  
大量野外构造地质调查和深部构造解释表明柯坪塔格推覆构造由多组倒转复式背斜、复式箱状背斜构成的推覆体及其前缘逆冲断裂组成 ,由寒武系—第四系组成的推覆体由北向南逆—斜冲 ,平面上构成向南凸出的弧形推覆构造 ;普昌断裂由各不相连的逆冲斜冲断裂段组成 ,而不是完整的一条走滑断层 ,各推覆体前缘逆冲断裂与各推覆体的普昌断裂段共同构成统一的前缘逆冲斜冲逆冲断裂和推覆构造系统 ;普昌断裂段以西的推覆体具有向东抬升、向西倾覆的鼻状构造特征 ,普昌断裂段以东的推覆体具有向西抬升、向东倾覆的鼻状构造特征 ,普昌基底隆起带是巴楚隆起隐伏在柯坪塔格推覆构造之下的部分。各推覆体前缘断裂在深部均归并于统一的寒武系底部的滑脱面 ,其南浅北深 ,东浅西深 (普昌隆起带以西 )或西浅东深 (普昌隆起带以东 ) (6 10km ) ,埋深较大区发育多组滑脱面。柯坪塔格推覆构造的形成时期为晚第四纪 ,为现今活动的推覆构造系统。文中认为各推覆体向南西的倾覆端基底滑脱面和中新生界内部的滑脱面没有贯通 ,是未来 6级以上地震的发震构造部位。  相似文献   

6.
塔里木盆地塔中低凸起北斜坡古生代断裂展布与构造演化   总被引:10,自引:2,他引:8  
李传新 《地质学报》2009,83(8):1065-1073
通过对塔中低凸起北斜坡4500km2三维地震数据体的精细解析,根据不整合面和生长地层分析以及断层与地层之间的接触关系,厘定划分出四期不同应力性质的断裂体系,分别为寒武-早奥陶世拉张断裂,晚奥陶世冲断挤压和北西向走断裂,志留-泥盆纪北东向走滑断裂以及二叠纪的岩浆刺穿。寒武-早奥陶世拉张断裂展布形态和发育规模奠定了后期构造活动的基础;晚奥陶世断裂呈发散的帚状,向东南方向收敛,断裂分布具有明显的分带和分段性,东部主要为逆冲断裂,中西部发育北西向走滑断裂,晚奥陶世断裂体系可划分为六组呈北西向展布的弧型断裂带,各弧形断裂带由多条断裂组成,其形成可能与古生代阿尔金北缘北西向冲断挤压有关;塔中志留-泥盆纪走滑断裂体系主要是在挤压应力环境下形成的,呈北东向展布,走滑断裂体系由三部分组成:主干边界断裂、尾端羽列断裂和拉分地堑,其中主干断裂剖面上表现为高角度近似直立断面,直插基底,延伸较远,剖面上呈花状构造,尾端羽列断裂在主干断层的尾端发育,主要位于主干断裂的北端,拉分地堑平面上呈菱形,受多级断层控制;二叠纪岩浆刺穿在塔中三维区呈点状或条带状,岩浆刺穿对早期断裂进行叠置和改造,岩浆侵入和底辟作用致使地层隆升,形成一系列逆断层性质的“正花状构造”。构造活动决定了断裂发育,早古生代塔里木盆地及其周缘地区伸展-聚敛构造演化构成了一个较为完整的威尔逊旋回,寒武纪-早奥陶世塔里木周缘古大洋拉张裂解,早奥陶世末-晚奥陶世部分古大洋俯冲消减,晚奥陶世-泥盆纪周缘大洋部分闭合,发生弧陆或陆陆碰撞,二叠纪岩浆活动代表了另一个构造旋回的开始。  相似文献   

7.
塔北隆起北部叠加断裂构造特征与成因背景分析   总被引:9,自引:3,他引:9       下载免费PDF全文
塔北隆起在塔里木叠合盆地演化时期经历了古克拉通隆起、早期前陆前缘隆起、库车再生前陆盆地斜坡3个阶段。经过两期成盆构造变革阶段,塔北隆起北部垂向上叠加深、浅层两组断裂系统:深层断裂系统为基底逆冲断裂,发育冲断构造、背冲构造组合;浅层断裂系统为正断层,发育地堑、地垒构造样式组合。两组不同性质断裂系统的发育均对应于两期造山挤压背景下前陆盆地形成阶段。笔者认为,深层断裂并非是处于早期前陆变形区域,而是处于挤压背景下板内塔北古克拉通隆起“纵弯”构造变形中岩层破裂的结果。浅层断裂是库车再生前陆盆地阶段塔北隆起北部基底(前中生界构造层)受水平挤压翘曲变形(纵弯变形)导致上覆岩层引张破裂的结果。  相似文献   

8.
The Quaternary activity of the faults at the eastern end of the Altyn Tagh fault, including the Dengdengshan–Chijiaciwo, Kuantanshan and Heishan faults, was studied on the basis of interpretation of satellite images, trenching, geomorphologic offset measurements and dating. The Altyn Tagh fault has extended eastwards to Kuantanshan Mountain. The left–slip rates of the Altyn Tagh fault decreased through the Qilianshan fault and were transformed into thrust and folds deformation of many NW–trending faults within the Jiuxi basin. Meanwhile, under NE–directed compression of the Tibetan plateau, thrust dominated the Dengdengshan–Chijiaciwo fault northeast of the Kuantanshan uplift with a rate lower than that of every fault in the Jiuxi basin south of the uplift, implying that tectonic deformation is mainly confined to the plateau interior and the Hexi Corridor area. From continual northeastward enlargement of the Altyn Tagh fault, the Kuantanshan uplift became a triangular wedge intruding to the east, while the Kuantanshan area at the end of this wedge rose up strongly. In future, the Altyn Tagh fault will continue to spread eastward along the Heishan and Jintananshan faults. The results have implications for understanding the propagation of crustal deformation and the mechanism of the India–Eurasian collision.  相似文献   

9.
中国中始新世—早更新世构造事件与应力场   总被引:5,自引:0,他引:5  
中始新世—渐新世(52—23.3Ma)的华北构造期是以太平洋板块朝NWW方向位移为主要特征,使我国大陆受到近东西向的挤压,造成一系列近南北向的褶皱、逆掩断层和许多走向近东西的正断层、单断箕状盆地。此构造事件的发生可能与始新世末期北美、加勒比海和东太平洋的大量微玻璃陨石的坠落、冲击有关。中新世--早更新世(23.30.7Ma)的喜马拉雅构造期是以印度—澳大利亚板块与菲律宾海板块向北推移为主要特征,造成喜马拉雅山和日本列岛南部的俯冲带,使我国西部发育走向近东西的褶皱、逆掩断层系,而在东部地区则形成许多走向近南北的深切地幔的正断层系.并使南海与日本海再次张开。出现洋壳。喜马拉雅构造事件可能与印度洋、南亚、澳大利亚附近地区的微玻璃陨石群的冲击有关。  相似文献   

10.
《地学前缘》2007,14(6):168-174
准南有三条走向东西右列的新生代冲断褶皱带,是天山北麓右行走滑兼走逆冲断层的尾端冲断扇构造。各冲断褶皱带的西端与天山北麓断层相接触处形成最早,在中新世中期开始形成,主体在中新世晚期约10Ma开始形成,其末端在第四纪才开始形成,表现出挤压的构造动力和变形自南向北扩展。准南逆冲构造带的初始时间比天山南麓的库车逆冲构造带晚约8Ma,说明天山造山带因为塑性较高,构造动力传播是耗时的,这与塔里木盆地刚性高、瞬时传递的特征形成对照。瞬时传递构造应力和耗时传递构造动力在空间上的交替出现是印藏陆陆碰撞导致陆内变形传播形式的基本原因。  相似文献   

11.
文通过研究区深层主要变形带构造变形解析,确认塔东南下古生界构造基本轮廓形成于中奥陶世末,定型于奥陶纪末—志留纪,北部和西部分别有喜山期和海西晚期构造的叠加。以塔中Ⅰ构造带—塔中5-38井构造带、塘北—玉北构造带、塔中南缘构造带为界,研究区可分为4个构造样式不同的构造单元。单元边界的构造变形相对剧烈,以逆冲—走滑断裂带为主,单元内部构造变形相对较弱。自东南向盆地内部,构造变形由强变弱。东南边缘塘沽巴斯凹陷以弧形向西北展布的基底滑脱型逆冲构造为特征,变形最为剧烈。晚奥陶世以凹陷为主,奥陶纪末期志留纪褶皱隆起。北侧为塔中隆起,是一个断裂—褶皱复背斜,主体发育于中奥陶世晚期,缺失中奥陶统,且控制了上奥陶统良里塔格组沉积时期孤立台地沉积,于奥陶纪末—志留纪定型。构造带以基底卷入扭动挤压断裂—褶皱变形为主,总体受控于北缘断层,自西向东逆冲幅度增大,西部为南北对称复背斜,东部形成向北逆冲的构造带。塔中隆起西段自北向南由逆冲挤压向压扭性走滑构造转变。西部巴楚东段及塔西南东部以区域性的隆升为主,与塔中隆起相似,大面积缺失中奥陶统地层。北部顺托地区则以走滑断裂发育为主,断裂主要活动期为奥陶纪末—志留纪和海西晚期。构造变形组合显示,塔东南下古生界构造变形动力主要来自盆地东南部,是东昆仑与阿尔金洋渐进闭合、俯冲碰撞过程导致塔里木板块变形的产物。变形时序及研究区NE向断裂运动规律表明板块作用自中加里东至晚加里东持续压扭的过程。塔东南地区各单元构造样式与强度差异表明盆地盖层变形明显受到基底断块与内部寒武系膏泥岩分布的制约。其次,断裂的多期活动体现了后期构造的叠合改造的作用,顺托地区NE向断裂可能与海西晚期构造运动的延展有关。  相似文献   

12.
燕山西段及北京西山晚中生代逆冲构造格局及其地质意义   总被引:18,自引:0,他引:18  
燕山西段及北京西山晚中生代逆冲构造集中分布于三个NE向带状区域中,三个带状区域的间隔约为60km,延伸长度自东向西依次减小,呈现出明显的逆冲构造发育的三角形区域。三角形区域的北界为“内蒙地轴”南缘断裂西段,南西界与中元古代早期古盆地构造边界一致,东南部边界则与华北克拉通基底新太古代-古元古代中部碰撞造山带的东部边界大致吻合。逆冲构造具有基底卷入的厚皮构造与盖层内部的薄皮构造共存的构造属性,上盘运动方向总体指向NW,逆冲构造变形主要发生在140~130Ma。逆冲后伸展构造变形以发育在主要逆冲构造后侧为主,并利用先存构造薄弱带。先存构造薄弱带在有利区域构造应力和其他影响因素的作用下导致的构造活化,可能是燕山板内构造变形的重要机制之一。主要逆冲变形前后均有大规模岩浆活动的构造-岩浆时空组合表明,收缩构造造成地壳加厚及由此引发的深部地壳重熔,难以作为统一的机制对这些特征进行合理阐释,需要有其他方式的深部热物质与能量的参与。北京西山霞云岭—长操、教军场—大安山以及马兰—胡林等逆冲断层,是一个统一的大规模的逆冲构造的不同组成部分,具典型、连续的断坪-断坡结构,它形成于髫髻山组(148~146Ma)之后、南窖闪长岩(128Ma)侵入之前,而不是“印支期(或更早)”,它与南大寨—八宝山逆冲构造构成北京西山晚中生代逆冲构造格局。区域性的NW-SE向收缩构造作用及南大寨—八宝山逆冲构造上覆岩席的构造加载,可能是北京西山的蓝晶石带和硬绿泥石带为代表的高压动力变质作用的基本构造原因。  相似文献   

13.
准噶尔南缘新生代断裂的形成机制   总被引:3,自引:0,他引:3  
准南有三条走向东西右列的新生代冲断褶皱带,是天山北麓右行走滑兼走逆冲断层的尾端冲断扇构造。各冲断褶皱带的西端与天山北麓断层相接触处形成最早,在中新世中期开始形成,主体在中新世晚期约10Ma开始形成,其末端在第四纪才开始形成,表现出挤压的构造动力和变形自南向北扩展。准南逆冲构造带的初始时间比天山南麓的库车逆冲构造带晚约8Ma,说明天山造山带因为塑性较高,构造动力传播是耗时的,这与塔里木盆地刚性高、瞬时传递的特征形成对照。瞬时传递构造应力和耗时传递构造动力在空间上的交替出现是印藏陆陆碰撞导致陆内变形传播形式的基本原因。  相似文献   

14.
We have studied the evolution of the tectonic lithofacies paleogeography of Paleocene–Eocene, Oligocene, Miocene, and Pliocene of the Qinghai–Tibet Plateau by compiling data regarding the type, tectonic setting, and lithostratigraphic sequence of 98 remnant basins in the plateau area. Our results can be summarized as follows. (1) The Paleocene to Eocene is characterized by uplift and erosion in the Songpan–Garzê and Gangdisê belts, depression (lakes and pluvial plains) in eastern Tarim, Qaidam, Qiangtang, and Hoh Xil, and the Neo-Tethys Sea in the western and southern Qinghai–Tibet Plateau. (2) The Oligocene is characterized by uplift in the Gangdisê–Himalaya and Karakorum regions (marked by the absence of sedimentation), fluvial transport (originating eastward and flowing westward) in the Brahmaputra region (marked by the deposition of Dazhuka conglomerate), uplift and erosion in western Kunlun and Songpan–Garzê, and depression (lakes) in the Tarim, Qaidam, Qiangtang, and Hoh Xil. The Oligocene is further characterized by depressional littoral and neritic basins in southwestern Tarim, with marine facies deposition ceasing at the end of the Oligocene. (3) For the Miocene, a widespread regional unconformity (ca. 23 Ma) in and adjacent to the plateau indicates comprehensive uplift of the plateau. This period is characterized by depressions (lakes) in the Tarim, Qaidam, Xining–Nanzhou, Qiangtang, and Hoh Xil. Lacustrine facies deposition expanded to peak in and adjacent to the plateau ca. 18–13 Ma, and north–south fault basins formed in southern Tibet ca. 13–10 Ma. All of these features indicate that the plateau uplifted to its peak and began to collapse. (4) Uplift and erosion occurred during the Pliocene in most parts of the plateau, except in the Hoh Xil–Qiangtang, Tarim, and Qaidam.  相似文献   

15.
燕山板内造山带中部承德盆地复杂的中生代褶皱及逆冲断裂构造,曾被解释为土城子组沉积之后大型逆冲推覆构造(位移量大于40~45km)又经褶皱变形的结果。近年来,土城子组沉积相和物源区分析、中新元古界沉积古地理研究以及相关构造变形研究结果等,对这一变形大型逆冲构造模型提出了多方位质疑。但已有研究并未提出新的构造模型来解释这一复杂构造区域中生代构造变形样式和形成机制。文中通过对承德盆地区域主体构造——承德向斜、向斜两翼逆冲构造变形几何学与运动学特征、向斜转折端附近构造变形与断裂发育状况进行详细野外调查及对关键地质体同位素地质年代进行测试,发现承德向斜两翼逆冲断层为分别向向斜核部以外区域逆冲的独立逆冲断层,逆冲断层活动与承德向斜变形是在统一的收缩变形体制下准同时形成的。它们形成于土城子组之后、张家口组火山活动之前,即距今约139~136 Ma。据此提出了"承德逆冲构造"的背离向斜逆冲构造模型。这一模型合理地解释了燕山中部承德盆地区域中生代构造变形和相应的盆地充填特征,同时表明,燕山板内造山带并不存在碰撞造山带前陆褶皱逆冲带中常见的大型薄皮逆冲构造样式。这一研究结果展示了褶皱相关断裂构造模型在研究和揭示收缩构造变形区域大尺度褶皱与断裂构造相互关系及准确重建区域构造演化过程方面的重要意义。  相似文献   

16.
The Western Mediterranean extensional basins and the Alpine orogen   总被引:1,自引:0,他引:1  
The western Mediterranean late Oligocene–Miocene basins (Alboran, Valencia and Provençal basins) are a coherent system of interrelated troughs. In all basins normal faults and thermal subsidence migrated toward the east progressively moving to the Miocene-to-Pleistocene Algerian and Tyrrhenian basins. All those troughs appear elements of the back-arc opening related to the eastward roll-back of the W-directed Apennines–Maghrebides subduction zone, similarly to western Pacific back-arc settings.
These late Oligocene–early Miocene basins nucleated both within the Betic cordillera (e.g. Alboran sea) and in its foreland (Valencia and Provençal troughs). The N40–70° direction of grabens is oblique to the coexisting N60–80°-trending orogen and shows its structural independence from the orogenic roots. Thus, as the extension cross-cuts the orogen and developed also well outside the thrust belt front, the westernmost basins of the Mediterranean had to develop independently from the Alps-Betics orogen. Therefore, the Alboran extension, considered a classic example of a basin generated by the collapse of an orogen, cannot be ascribed to the detachment or annihilation of the lithospheric root. In contrast with the eastward migrating extensional basins, the Betic-Balearic thrust front was migrating westward producing interference or inversion structures.  相似文献   

17.
张岳桥  李海龙 《中国地质》2016,(6):1829-1852
文章系统梳理了青藏高原东部地区晚新生代重大构造事件的沉积记录、岩浆记录和构造变形响应,重新厘定了青藏运动或横断事件的起始时限,建立了青藏高原东部晚新生代构造演化序列与挤出造山构造体系。研究认为,发生在上新世之前的青藏运动是青藏高原东部最重要的构造作用阶段,起始于距今12~8 Ma,并持续到上新世早期,持续时间达6~8 Ma。在这个构造运动阶段,青藏高原东部地块(川滇地块、川青地块、西秦岭构造带和陇中地块等)有序地向东挤出,受到鲜水河、东昆仑、海原等WNW-ESE向大型断裂左旋走滑运动调节,构造挤出同时伴随地块内部逆冲褶皱变形,导致地壳增厚和高原东缘山脉快速崛起;构造挤出也超越了现今东缘地貌边界,向东扩展导致扬子地块盖层滑脱褶皱,形成龙泉山、大凉山等褶皱构造带。上新世出现的砾石层(东缘前陆地带的大邑砾石层、临夏盆地的积石砾石层、兰州盆地的五泉砾石层等)标志了青藏高原东部差异性构造地貌的形成。上新世晚期至早更新世时期(3.6~1.0 Ma)对应一个构造松弛阶段,青藏高原东部整体进入冰冻时期,沿其东缘发育一系列受正断层控制的南北向伸展断陷盆地,如安宁河谷地、元谋盆地、盐源盆地、滇西北盆地群等,其中加积了以昔格达组为代表的稳定河湖相沉积。发生在早、中更新世之交(距今1.0~0.6 Ma)的昆—黄运动或元谋事件使青藏高原东部地块进一步向东挤出、东缘地壳逆冲增厚和年轻山系加速隆升。晚更新世以来的构造运动称为共和运动或最新构造变动阶段,起始于距今约120 ka,青藏高原东缘构造变形系统出现重大分化,南段川滇菱形地块发生绕喜玛拉雅东构造结的顺时针旋转运动,形成川滇双弧形旋扭构造体系;而中段川青地块的挤出伴随东缘龙门山断裂带的右旋走滑运动和秦岭山系的向东挤出。在这个最新构造变动阶段,青藏高原东部下地壳通道流可能是重要的深部构造驱动因素。  相似文献   

18.
《Geodinamica Acta》2001,14(1-3):177-195
The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quaternary volcanoes, and (3) a 5-km thick, undeformed Plio-Quaternary continental volcano-sedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional–contractional, and Oligocene-Quaternary in age; whereas it is compressional–extensional, and Plio-Quaternary in age in the east Anatolian plateau and the Lesser Caucasus.Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional–contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (∼ 12 Ma) continent–continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N–S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places.  相似文献   

19.
塔里木盆地断裂构造分期差异活动及其变形机理   总被引:9,自引:3,他引:6  
本文的目的是探讨塔里木盆地断裂构造分期差异活动过程及其变形机理.在地震剖面解释、钻井资料和地质资料综合分析的基础上,通过编制塔里木盆地不同时期断裂系统图,提出控制塔里木盆地断裂构造形成和演化主要构造活动期次为:加里东早期、加里东中期、加里东晚期-海西早期、海西晚期、印支期、燕山期和喜马拉雅期.加里东早期断裂活动受伸展环境制约,沿先存基底断裂带形成张性正断层.加里东中期、加里东晚期-海西早期断裂活动以逆冲作用为主,在塔东、塔中、塘古巴斯、巴楚和麦盖提地区最为发育.海西晚期断裂活动也是以逆冲作用为特征,并从早期断裂强烈活动的塔中、塘古巴斯、玛东等地区,迁移到塔北隆起和东部地区.印支、燕山和喜马拉雅期,前陆地区断裂构造发育,形成叠瓦冲断带、褶皱-冲断带、双重构造、盐相关构造等;但在盆内稳定区,断裂构造不发育,活动性弱.古生代断裂构造发育分布的控制机理,主要与区域大地构造环境的变化和构造转换、先存基底断裂带、大型区域性不整合、滑脱带等要素密切相关.区域大地构造环境的变化和构造转换主要受控于塔里木周缘洋盆的伸展裂解、俯冲消减和洋盆闭合的时限和强度.先存基底断裂带或基底构造软弱带往往控制着后期断裂的发育位置和展布方向.大型区域性不整合和滑脱带控制着断裂构造的发育和分布层位.中、新生代断裂构造发育分布的控制机理,与区域大地构造环境及其构造转换、区域构造位置有关.中、新生代塔里木断裂构造主要分为三种环境,即前陆构造环境、盆内稳定区构造环境和隆升剥蚀区构造环境.盆内稳定区断裂构造不发育,活动性较弱.中、新生代断裂构造主体发育在前陆构造环境中,主要受控于周缘造山带强烈隆升、挤压冲断、走滑-逆冲或逆冲-走滑作用,同时与喜马拉雅晚期盆-山耦合作用及滑脱层的发育有关.  相似文献   

20.
Thrusting of the North Lhasa Block in the Tibetan Plateau   总被引:9,自引:1,他引:8  
A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号