首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 353 毫秒
1.
冷却屋顶对北京城市热环境影响的模拟研究   总被引：1，自引：0，他引：1  
两种类型冷却屋顶(高反照率屋顶、绿色屋顶)的研究对于北京夏季城市高温的缓解作用具有重要的意义。耦合单层城市冠层模式(SLUCM)与天气研究与预报(WRF3.8)模式, 采用北京市及其外围地区158个站点气象资料评估模式对照案例(case1)的模拟性能, 并选取7组不同反照率屋顶案例(case2—4)和不同覆盖比例的绿色屋顶案例(case5—8)进行敏感性试验。研究结果表明:(1)在北京城市区域, 高反照率为0.85的屋顶(case4)比绿色占比100%的屋顶(case8)具有更好的降温效果, case4的3 d平均降温可达到0.90℃, 而case8降温为0.46℃。(2)屋顶反照率每增加0.1, 会导致北京城市区域最高气温降低0.27℃; 绿色屋顶比例的增大也会导致温度的降低, 每增加10%, 最高气温降低0.16℃。(3)两种冷却屋顶对城市热岛也存在显著的影响, 在13—14时(北京时), case4与case1对比的城市热岛(UHI)降温最大差值为1.47℃, 比case8的城市热岛降温更加明显。(4)在城市区域垂直高度上, 冷却屋顶的降温作用可达到1.2 km, 同时湍流运动存在明显的减弱; 在3 d的12—18时, case4、case8与case1对比, 边界层高度平均降低了669与430 m。   相似文献   

2.
Rapid urbanization has intensified summer heat waves in recent decades in Beijing, China. In this study, effectiveness of applying high-reflectance roofs on mitigating the warming effects caused by urban expansion and foehn wind was simulated for a record-breaking heat wave occurred in Beijing during July 13–15, 2002. Simulation experiments were performed using the Weather Research and Forecast (WRF version 3.0) model coupled with an urban canopy model. The modeled diurnal air temperatures were compared well with station observations in the city and the wind convergence caused by urban heat island (UHI) effect could be simulated clearly. By increasing urban roof albedo, the simulated UHI effect was reduced due to decreased net radiation, and the simulated wind convergence in the urban area was weakened. Using WRF3.0 model, the warming effects caused by urban expansion and foehn wind were quantified separately, and were compared with the cooling effect due to the increased roof albedo. Results illustrated that the foehn warming effect under the northwesterly wind contributed greatly to this heat wave event in Beijing, while contribution from urban expansion accompanied by anthropogenic heating was secondary, and was mostly evident at night. Increasing roof albedo could reduce air temperature both in the day and at night, and could more than offset the urban expansion effect. The combined warming caused by the urban expansion and the foehn wind could be potentially offset with high-reflectance roofs by 58.8 % or cooled by 1.4 °C in the early afternoon on July 14, 2002, the hottest day during the heat wave.  相似文献   

3.
Global cooling: increasing world-wide urban albedos to offset CO2   总被引：2，自引：0，他引：2  
Increasing urban albedo can reduce summertime temperatures, resulting in better air quality and savings from reduced air-conditioning costs. In addition, increasing urban albedo can result in less absorption of incoming solar radiation by the surface-troposphere system, countering to some extent the global scale effects of increasing greenhouse gas concentrations. Pavements and roofs typically constitute over 60% of urban surfaces (roof 20–25%, pavements about 40%). Using reflective materials, both roof and pavement albedos can be increased by about 0.25 and 0.15, respectively, resulting in a net albedo increase for urban areas of about 0.1. On a global basis, we estimate that increasing the world-wide albedos of urban roofs and paved surfaces will induce a negative radiative forcing on the earth equivalent to offsetting about 44 Gt of CO2 emissions. At ～$25/tonne of CO2, a 44 Gt CO2 emission offset from changing the albedo of roofs and paved surfaces is worth about $1,100 billion. Furthermore, many studies have demonstrated reductions of more than 20% in cooling costs for buildings whose rooftop albedo has been increased from 10–20% to about 60% (in the US, potential savings exceed $1 billion per year). Our estimated CO2 offsets from albedo modifications are dependent on assumptions used in this study, but nevertheless demonstrate remarkable global cooling potentials that may be obtained from cooler roofs and pavements.  相似文献   

4.
利用耦合单层城市冠层模型的中尺度数值模式WRF/UCM,选取8组不同反照率和绿化比例的屋顶冷却方案进行敏感性试验,模拟研究不同冷却屋顶方案对长三角城市群2013年夏季城市热环境的影响,并分析其影响机制。结果表明：不同冷却屋顶方案对城市群热环境的缓解效果与屋顶参数之间呈很强的线性关系。高温热浪天气下,HR4（反照率为1.0）和GR4（屋顶绿化率为100%）方案的制冷度日数分别降低了14.7%和10.9%,节约的能源比普通夏日更多。同时,高温热浪天气会增强热岛强度,高反照率屋顶方案在白天对热岛起到更有效的缓解,热浪天气下日平均热岛强度最大可降低1.36℃。相同方案下,在高温热浪天气下的缓解效果均胜于普通夏日,平均而言,高反照率屋顶和屋顶绿化的降温效果分别增大38.5%和34.9%,增湿效果分别增大29.5%和21.9%,这主要是由于在高温热浪天气下,高反照率屋顶方案能够减少更多的净辐射通量,屋顶绿化方案能够释放更多的潜热通量。此外,城市格点密集区域的降温效果优于分散的城市区域,处于城市群中的常州区域较单独的杭州区域的降温幅度平均高32%。  相似文献   

5.
Air temperature was monitored at 13 sites across the urban perimeter of a Brazilian midsize city in winter 2011. In this study, we show that the urban heat island (UHI) develops only at night and under certain weather conditions, and its intensity depends not only on the site's land cover but also on the meteorological setting. The urban heat island intensity was largest (6.6 °C) under lingering high-pressure conditions, milder (3.0 °C) under cold anticyclones and almost vanished (1.0 °C) during the passage of cold fronts. The cooling rates were calculated to monitor the growth and decay of the UHI over each specific synoptic setting. Over four contiguous days under the effect of a lingering high-pressure event, we observed that the onset of cooling was always at about 2 h before sunset. The reference site attained mean cooling rate of ?2.6 °C h?1 at sunset, whilst the maximum urban rate was ?1.2 °C h?1. Under a 3-day cold anticyclone episode, cooling also started about 2 h before sunset, and the difference between maximum rural (?2.0 °C h?1) and urban (?1.0 °C h?1) cooling rates diminished. Under cold-front conditions, the cooling rate was homogeneous for all sites and swang about zero throughout the day. The air temperature has a memory effect under lingering high-pressure conditions which intensified the UHI, in addition to the larger heat storage in the urban area. Cold anticyclone conditions promoted the development of the UHI; however, the cold air pool and relatively light winds smoothed out its intensity. Under the influence of cold fronts, the urban fabric had little effect on the city's air temperature field, and the UHI was imperceptible.  相似文献   

6.
The study underlines the characteristics of the urban heat island of Ia?i (Ia?i’s UHI) on the basis of 3 years of air temperature measurements obtained by fixed-point observations. We focus on the identification of UHI development and intensity as it is expressed by the temperature differences between the city centre and the rural surroundings. Annual, seasonal and daily characteristics of Ia?i’s UHI are investigated at the level of the classical weather observation. In brief, an intensity of 0.8 °C of UHI and a spatial extension which corresponds to the densely built area of the city were delineated. The Ia?i UHI is stronger during summer calm nights—when the inner city is warmer with 2.5–3 °C than the surroundings—and is weaker during windy spring days. The specific features of Ia?i’s UHI bear a profound connection to the specificity of the urban structure, the high atmospheric stability in the region and the local topography. Also, the effects of Ia?i’s UHI upon some environmental aspects are presented as study cases. For instance, under the direct influence of UHI, we have observed that in the city centre, the apricot tree blossoms earlier (with up to 4 days) and the depth of the snow cover is significantly lower (with up to 10 cm for a rural snow depth of 30 cm) than in the surrounding areas.  相似文献   

7.
Urban heat island intensities (UHI) have been assessed based on in situ measurements and satellite-derived observations for the megacity Delhi during a selected period in March 2010. A network of micrometeorological observational stations was set up across the city. Site selection for stations was based on dominant land use–land cover (LULC) classification. Observed UHI intensities could be classified into high, medium and low categories which overall correlated well with the LULC categories viz. dense built-up, medium dense built-up and green/open areas, respectively. Dense urban areas and highly commercial areas were observed to have highest UHI with maximum hourly magnitude peaking up to 10.7 °C and average daily maximum UHI reaching 8.3 °C. UHI obtained in the study was also compared with satellite-derived land surface temperatures (LST). UHI based on in situ ambient temperatures and satellite-derived land surface temperatures show reasonable comparison during nighttime in terms of UHI magnitude and hotspots. However, the relation was found to be poor during daytime. Further, MODIS-derived LSTs showed overestimation during daytime and underestimation during nighttime when compared with in situ skin temperature measurements. Impact of LULC was also reflected in the difference between ambient temperature and skin temperature at the observation stations as built-up canopies reported largest gradient between air and skin temperature. Also, a comparison of intra-city spatial temperature variations based UHI vis-à-vis a reference rural site temperature-based UHI indicated that UHI can be computed with respect to the station measuring lowest temperature within the urban area in the absence of a reference station in the rural area close to the study area. Comparison with maximum and average UHI of other cities of the world revealed that UHI in Delhi is comparable to other major cities of the world such as London, Tokyo and Beijing and calls for mitigation action plans.  相似文献   

8.
当前采用何种冷却屋顶材料缓解城市化带来的高热灾害是城市气象领域的热点问题。本文基于城镇能量平衡模式（TEB）,分析了4种不同材料的冷却屋顶,包括转化效率为14%的太阳能板（覆盖面积分别占屋顶面积的100%及50%）和3种高反照率材料:铝箔沥青膜、白色TPO膜、科罗拉多大学新研发的玻璃聚合物混合超材料,在2017年夏季高温热浪时间段（7月16～30日）对建筑物街区屋顶表面温度及辐射热量产生的影响。结果表明在持续高温的天气背景下,在屋顶铺设超材料和100%覆盖面积的太阳能板降温效果最好,屋顶表面温度白天平均分别可降低18.59 K和19.58 K,铝箔沥青膜效果次之,平均降低13.47 K,50%覆盖面积的太阳能板 TPO膜再次,平均降低9.7 K和5.4 K,夜间也具有1.08～4.53 K的降温。铺设冷却屋顶材料可以直接或间接地减少冷却能源需求,铺设100%太阳能板以及超材料屋顶可以使建筑物冷却能耗降到最低,每平方米分别至多可降低2.1 W m?2和2.16 W m?2,使用铝箔沥青膜效果次之,至多降低1.47 W m?2,50%铺设面积的太阳能屋顶及TPO膜再次。其中所选太阳能光伏板每日可额外产生最多1.84 kW h的电量,模拟的两周内产生电量可全部抵消同期空调制冷能耗。  相似文献   

9.
Thermal infrared images from Landsat satellites are used to derive land surface temperatures (LST) and to calculate the intensity of the surface urban heat island (UHI) during the summer season in and around the city of Brno (Czech Republic). Overall relief, land use structure, and the distribution of built-up areas determine LST and UHI spatial variability in the study area. Land-cover classes, amount and vigor of vegetation, and density of built-up areas are used as explanatory variables. The highest LST values typically occur in industrial and commercial areas, which contribute significantly to surface UHI intensity. The intensity of surface UHI, defined as the difference between mean LST for urban and rural areas, reached 4.2 and 6.7 °C in the two images analyzed. Analysis of two surface characteristics in terms of the amount of vegetation cover, represented by normalized difference vegetation index, demonstrates the predominance of LST variability (56–67 % of explained variance) over the degree of urbanization as represented by density of buildings (37–40 % of LST variance).  相似文献   

10.
基于MODIS的安徽省代表城市热岛效应时空特征   总被引：2，自引：0，他引：2       下载免费PDF全文
利用2001—2010年覆盖安徽省的MODIS数据,选取在气候、地理、城市化等方面具有代表性的合肥、芜湖、阜阳作为研究对象,并结合GIS技术,分析地表温度的日变化及季节变化特征,得到安徽省代表城市热岛效应的时空分布。结果表明:安徽省省会合肥的热岛效应最为显著,安徽省南部代表城市芜湖的热岛效应强于北部代表城市阜阳, 同时具有显著的日变化和季节变化特征。近10年来,安徽代表城市热岛面积和热岛强度均呈增加趋势,但合肥热岛强度大于3 ℃的极端热岛效应有一定缓解。白天大片水体对缓解城市的热岛效应作用明显,而夜晚则不明显,甚至成为地表温度的高值中心。夏季地表温度与归一化植被指数的负相关最显著,即提高城市植被覆盖度对降低地表温度和缓解城市热岛效应有重要影响。  相似文献   

11.
Compared with other large cities Vienna shows different urban development characteristics. The city has had a zero population growth during 1951–1995, a period of rapid growth elsewhere. In spite of its stagnating population of about 1,6 million Vienna has had development in other areas: a doubling of living floor space, a two and a half-fold increase in total energy consumption, a 60% rise of traffic area. In contrast, forests have been reduced by 20% and grasslands within the city borders by 30%. Of the 34 temperature recording stations in the study area of 1450 km2, nine series passed the quality tests after careful homogenization. Three of these were in the rural environment and were used as reference series for the urban temperature excess at the other six stations in the urbanized area. The urban excess temperatures vary from site to site: from 0.2 K in suburban areas up to 1.6 K in densely built-up areas. The Vienna case study illustrates two features of more than local interest which should be considered in urban climatology as well as in time series studies where the urban temperature excess is regarded as a bias. Firstly, in a city with constant population the urban heat excess shows significant to strongly significant trends of up to 0.6 K in 45 years due to changes in urban morphology and energy consumption. Secondly, the urban heat island and its trend cannot be regarded simply for the city as a whole. There are different absolute levels, different annual variations and different increases of the urban temperature excess in different parts of a city. The urban effect is more strongly influenced by the local surroundings of the site than by the city as a whole. So, if possible, urban heat islands should not be described by a two station approach only (the typical airport-downtown comparison), nor should it rely on regression between population number and heat island.  相似文献   

12.
太阳能光伏屋顶的安装在一定程度上能缓解城市化带来的能源危机和城市热环境的破坏。将太阳能板的传热模型引入WRF模式的多层城市冠层方案中,选取了2017年7月21—27日一次典型的高温热浪天气过程,在线模拟太阳能屋顶两种安装形式（贴覆式和支架式）对城市热环境及能量平衡的影响。结果表明:（1）贴覆式太阳能屋顶可使白天2 m气温最多降低0.29°C,降温效果优于支架式屋顶,但夜间温度下降较小。支架式屋顶白天最大降温0.23°C,夜间降温效果明显,与普通屋顶相比,温度最多降低了0.60°C。（2）太阳能屋顶白天确实可以起到降温效果,抑制白天边界层的发展高度,降低边界层的厚度。（3）太阳能屋顶除了对城市气象的影响外,最重要的是它对能源的贡献。从结果来看,太阳能电池板产生的电能可以满足商业区54.5%的空调消耗。   相似文献   

13.
Urban heat island research from 1991 to 2015: a bibliometric analysis   总被引：1，自引：0，他引：1  
A bibliometric analysis based on the Science Citation Index-Expanded (SCI-Expanded) database from the Web of Science was performed to review urban heat island (UHI) research from 1991 to 2015 and statistically assess its developments, trends, and directions. In total, 1822 papers published in 352 journals over the past 25 years were analyzed for scientific output; citations; subject categories; major journals; outstanding keywords; and leading countries, institutions, authors, and research collaborations. The number of UHI-related publications has continuously increased since 1991. Meteorology atmospheric sciences, environmental sciences, and construction building technology were the three most frequent subject categories. Building and Environment, International Journal of Climatology, and Theoretical and Applied Climatology were the three most popular publishing journals. The USA and China were the two leading countries in UHI research, contributing 49.56% of the total articles. Chinese Academy of Science, Arizona State University, and China Meteorological Administration published the most UHI articles. Weng QH and Santamouris M were the two most prolific authors. Author keywords were classified into four major groups: (1) research methods and indicators, e.g., remote sensing, field measurement, and models; (2) generation factors, e.g., impervious urban surfaces, urban geometry, waste heat, vegetation, and pollutants; (3) environmental effects, e.g., urban climate, heat wave, ecology, and pollution; and (4) mitigation and adaption strategies, e.g., roof technology cooling, reflective cooling, vegetation cooling, and urban geometry cooling. A comparative analysis of popular issues revealed that UHI determination (intensity, heat source, supporting techniques) remains the central topic, whereas UHI impacts and mitigation strategies are becoming the popular issues that will receive increasing scientific attention in the future. Modeling will continue to be the leading research method, and remote sensing will be used more widely. Additionally, a combination of remote sensing and field measurements with models is expected.  相似文献   

14.
This work examines the characteristics of the urban heat island (UHI) in a medium-sized city in northern Spain (Bilbao) using 5-year climate data (2005–2009) and the results of three specific measurement campaigns (2009–2010). Urban climate variables are not only compared with those in rural sites but also local climatic differences occurring inside the city are analysed. The findings presented in this paper show the influence of complex topography and sea/land breeze in the urban climate. Spatial characteristics and temporal evolution of UHI is presented. Hourly maximum temperature anomaly (ΔT u–r, max) occurs just after sunrise and an urban cold island (UCI) is developed after midday. Along the year, mean UHI intensity is highest in autumn and the UCI effect increases in spring and summer in relation with sea breeze cooling potential. Diurnal and seasonal variation of air flow patterns appear to influence significantly on UHI intensity.  相似文献   

15.
Richard VanCuren 《Climatic change》2012,112(3-4):1071-1083
Exploiting surface albedo change has been proposed as a form of geoengineering to reduce the heating effect of anthropogenic increases in greenhouse gases (GHGs). Recent modeling experiments have projected significant negative radiative forcing from large-scale implementation of albedo reduction technologies (“cool” roofs and pavements). This paper complements such model studies with measurement-based calculations of the direct radiation balance impacts of replacement of conventional roofing with “cool” roof materials in California. This analysis uses, as a case study, the required changes to commercial buildings embodied in California’s building energy efficiency regulations, representing a total of 4300 ha of roof area distributed over 16 climate zones. The estimated statewide mean radiative forcing per 0.01 increase in albedo (here labeled RF01) is ?1.38 W/m2. The resulting unit-roof-area mean annual radiative forcing impact of this regulation is ?44.2 W/m2. This forcing is computed to counteract the positive radiative forcing of ambient atmospheric CO2 at a rate of about 41 kg for each square meter of roof. Aggregated over the 4300 ha of cool roof estimated built in the first decade after adoption of the State regulation, this is comparable to removing about 1.76 million metric tons (MMT) of CO2 from the atmosphere. The point radiation data used in this study also provide perspective on the spatial variability of cool roof radiative forcing in California, with individual climate zone effectiveness ranging from ?37 to ?59 W/m2 of roof. These “bottom-up” calculations validate the estimates reported for published “top down” modeling, highlight the large spatial diversity of the effects of albedo change within even a limited geographical area, and offer a potential methodology for regulatory agencies to account for the climate effects of “cool” roofing in addition to its well-known energy efficiency benefits.  相似文献   

16.
利用中尺度数值模式WRF耦合单层城市冠层模块UCM,引入2005年MODIS土地利用类型资料,在对2005年1月25—28日兰州市热岛现象进行高分辨率数值模拟的基础上,设计了去除城市下垫面敏感性试验,探讨了城市下垫面对城市边界层的影响程度。结果表明,城市下垫面能使近地层大气温度升高而风速减小,并且,在夜间表现更明显。由城市热岛强度日变化分析可知,城市下垫面对兰州市热岛强度的贡献率为44%。夜间,城市上空200 m以下的近地层大气保持了白天的混合层特征,热岛环流的上升运动促进了山风环流,使得上升气流到达地面以上600 m左右;白天,由于山峰加热效应,城市上空400—600 m存在一个脱地逆温层,城市热岛环流使得11—15时（北京时）市区近地层出现弱上升气流,抑制了谷风环流的形成及发展。城市下垫面的低反照率特性和建筑物的多次反射作用导致城市下垫面的净辐射通量大于非城市下垫面;城市下垫面由于建筑材料的不透水性,导致潜热通量远小于感热通量,而储热项所占比重明显增大。  相似文献   

17.
This paper studies the maximum intensity of the urban heat island (UHI) that develops in Volos urban area, a medium-sized coastal city in central Greece. The maximum temperature difference between the city center and a suburb is 3.4°C and 3.1°C during winter and summer, respectively, while during both seasons the average maximum UHI intensity is 2.0°C. The UHI usually starts developing after sunset during both seasons. It could be attributed to the different nocturnal radiative cooling rate and to the different anthropogenic heat emission rate that are observed at the city center and at the suburb, as well as to meteorological conditions. The analysis reveals that during both seasons the daily maximum hourly (DMH) UHI intensity is positively correlated with solar radiation and with previous day’s maximum hourly UHI intensity and negatively correlated with wind speed. It is also negatively correlated with relative humidity during winter but positively correlated with it during summer. This difference could be attributed to the different mechanisms that mainly drive humidity levels (i.e., evaporation in winter and sea breeze (SB) in summer). Moreover, it is found that SB development triggers a delay in UHI formation in summer. The impact of atmospheric pollution on maximum UHI intensity is also examined. An increase in PM10 concentration is associated with an increase in maximum UHI intensity during winter and with a decrease during summer. The impact of PM10 on UHI is caused by the attenuation of the incoming and the outgoing radiation. Additionally, this study shows that the weekly cycle of the city activities induces a weekly variation in maximum UHI intensity levels. The weekly range of DMH UHI intensity is not very large, being more pronounced during winter (0.4°C). Moreover, a first attempt is made to predict the DMH UHI intensity by applying regression models, whose success is rather promising.  相似文献   

18.
This paper addresses the contribution of urban land use change to near-surface air temperature during the summer extreme heat events of the early twenty-first century in the Beijing–Tianjin–Hebei metropolitan area. This study uses the Weather Research Forecasting model with a single urban canopy model and the newest actual urban cover datasets. The results show that urban land use characteristics that have evolved over the past ~20 years in the Beijing–Tianjin–Hebei metropolitan area have had a significant impact on the extreme temperatures occurring during extreme heat events. Simulations show that new urban development has caused an intensification and expansion of the areas experiencing extreme heat waves with an average increase in temperature of approximately 0.60 °C. This change is most obvious at night with an increase up to 0.95 °C, for which the total contribution of anthropogenic heat is 34 %. We also simulate the effects of geo-engineering strategies increasing the albedo of urban roofs, an effective way of reducing urban heat island, which can reduce the urban mean temperature by approximately 0.51 °C and counter approximately 80 % of the heat wave results from urban sprawl during the last 20 years.  相似文献   

19.
High temperatures and heatwaves can cause large societal impacts by increasing health risks, mortality rates, and personal discomfort. These impacts are exacerbated in cities because of the Urban Heat Island (UHI) effect, and the high and increasing concentrations of people, assets and economic activities. Risks from high temperatures are now widely recognised but motivation and implementation of proportionate policy responses is inhibited by inadequate quantification of the benefits of adaptation options, and associated uncertainties. This study utilises high spatial resolution probabilistic projections of urban temperatures along with projections of demographic change, to provide a probabilistic risk assessment of heat impacts on urban society. The study focuses on Greater London and the surrounding region, assessing mortality risk, thermal discomfort in residential buildings, and adaptation options within an integrated framework. Climate change is projected to increase future heat-related mortality and residential discomfort. However, adjusting the temperature response function by 1–2 °C, to simulate adaptation and acclimatisation, reduced annual heat related mortality by 32–69 % across the scenarios tested, relative to a no adaptation scenario. Similar benefits of adaptation were seen for residential discomfort. The study also highlights additional benefits in terms of reduced mortality and residential discomfort that mitigating the urban heat island, by reducing albedo and anthropogenic heat emissions, could have.  相似文献   

20.
城市热环境问题日益严重,通过对已有热环境的研究结果进行分析,进而探讨改善热环境的相应措施具有重要实践意义.从城市热环境的影响因子、观测方法、研究手段、降温原理以及降温效果等方面对城市热环境的发展和缓解进行总结.深入分析当前主要的研究手段和缓解措施,包括遥感技术和数值模拟的使用,绿色屋顶、绿色建材、城市灌溉、城市结构、通...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号