共查询到19条相似文献,搜索用时 109 毫秒
1.
2.
为更加直观、清晰地表达海洋风场,提高可视化效率,总结归纳出现有的几种主要风场可视化表达方法——符号法、纹理法、粒子追踪法、切片法和表面建模法。对几种算法分别进行描述,针对各算法引入不同分辨率的风场数据进行动态可视化表达,通过比较总结分析各种算法的优势与不足,并提出了改进方案。 相似文献
3.
4.
5.
海洋和大气数据多模式动态可视化系统的设计和实现 总被引:1,自引:0,他引:1
为了实现海洋和大气数据多模式动态可视化,本系统使用VC++和CG着色语言进行开发,渲染引擎基于OpenGL三维图形标准。提出了一系列面向海洋和大气数据的模式分析方法,包括:探针功能、线模式、面模式、体模式、矢量模式和动态时间序列分析等,实现了将海量多维海洋大气数据转换为三维空间或动态演变的图像,同时完成用户交互处理操作。并将可视化技术应用于长时间序列的海洋大气数据,通过实时动态的可视化图像来体现海洋大气数据的动态变化过程。结果表明,该系统可实现常见海洋和大气数据的多模式动态可视化。 相似文献
6.
7.
本文结合二维流线可视化技术和中尺度涡旋识别技术,提出了3种中尺度涡旋时空连续可视化的方法:基于OW参数的涡旋可视化方法、基于栅格模板的涡旋可视化方法和基于矢量模板的涡旋可视化方法,这3种方法分别基于Okubo-Weiss算法、Faghmous的算法和Liu的算法来进行涡旋识别,同时将流场可视化的结果填充到涡旋内部,以获得更好的可视化效果。在可视化过程中本文引入了传输函数来对涡旋中的流线颜色和透明度进行实时交互,能够在控制界面上通过设置Key值点的颜色和位置来控制速度、涡度和OW参数等信息的显示效果。本文在性能和显示效果方面比较了3种方法的优劣。从性能上来讲,性能由高到低依次为:基于OW参数的涡旋可视化方法、基于栅格模板的涡旋可视化方法和基于矢量模板的涡旋可视化方法。从显示效果上来讲,基于OW参数的涡旋可视化方法在三者中最差,效果中有较多的杂乱的短线,同时涡旋边界较小,局限于涡旋核心区;基于栅格模板的涡旋可视化方法较第一种方法的显示效果有所提升,杂乱的短线较少,涡旋相对完整,但由于数据分辨率不够高的原因,在放大多倍后涡旋边界呈现锯齿状;基于矢量模板的涡旋可视化方法显示效果最好,涡旋完整、饱满。同时,因为首先进行了涡旋边界的重构,将涡旋边界矢量化,涡旋边界更加平滑。相对于传统长时间序列的涡旋可视化的方法而言,这3种方法提供了一个美观、动态和更富信息性的可视化方法,同时由于传输函数的加入,其可以成为科研人员研究涡旋的一个实用的工具。 相似文献
8.
9.
基于实时几何流线生成的二维海流数据交互可视化方法 总被引:1,自引:0,他引:1
海流可视化是海洋科学研究的热门领域。目前已有的可视化方法在视觉清晰度、真实度和运行效率等方面存在不足之处。文中提出一种新的基于实时几何流线生成的二维海流数据交互可视化方法。该方法实现了全球海流的时空连续表达,可较好地展现全球海流特征;采用概率的方法控制粒子密度,使全球范围内粒子保持均匀分布的状态;生成的流线清晰且具有较高的可调整性。通过MSLA和SODA两个示例数据集的可视化和性能分析证实了此方案具有很高的实用性和灵活性,可视化结果可以较好地反映全球洋流特征。 相似文献
10.
基于CUBE算法的多波束测深数据自动处理研究 总被引:1,自引:0,他引:1
对CUBE算法自动处理多波束测深数据的模型建立、格网节点的多重估计和最优估值选取准则进行了详细介绍,深入分析了多重估计的实用性,并通过实测数据对该算法进行实现.利用了抗差Kalman滤波改进CUBE算法.通过模拟数据对改进的CUBE算法进行实验,验证了算法改进的必要性. 相似文献
11.
远程遥控水下机器人系统是一种先进的海洋综合调查设备,能够实现海底长时间、高精度的定点取样作业及其他精细调查,在海洋区域地质调查中利用ROV开展高精度海底取样及其环境调查方面具有其他调查设备无法比拟的优越性。ROV具有功能多、综合作业能力强、安全可靠和实时遥控等优点。目前国内利用ROV进行海洋区域地质调查还处于起步阶段,随着ROV在海洋调查中的应用技术不断成熟和完善,利用ROV进行海洋区域地质调查将大大提高海洋区域地质调查的装备水平和调查精度,具有广阔的应用前景。以"海狮号"ROV系统为例,介绍其在我国海洋区域地质调查中的典型应用。 相似文献
12.
13.
Interference signals due to scattering from surface and reflecting from bottom is one of the most important problems of reliable communications in shallow water channels. To solve this problem, one of the best suggested ways is to use adaptive equalizers. Convergence rate and misadjustment error in adaptive algorithms play important roles in adaptive equalizer performance. In this paper, affine projection algorithm (APA), selective regressor APA(SR-APA), family of selective partial update (SPU) algorithms, family of set-membership (SM) algorithms and selective partial update selective regressor APA (SPU-SR-APA) are compared with conventional algorithms such as the least mean square (LMS) in underwater acoustic communications. We apply experimental data from the Strait of Hormuz for demonstrating the efficiency of the proposed methods over shallow water channel. We observe that the values of the steady-state mean square error (MSE) of SR-APA, SPU-APA0 SPU-normalized least mean square (SPU-NLMS), SPU-SR-APA0 SM-APA and SM-NLMS algorithms decrease in comparison with the LMS algorithm. Also these algorithms have better convergence rates than LMS type algorithm. 相似文献
14.
本文以卫星云图的热带气旋云系为研究对象,基于Canny边缘检测、contour轮廓提取等方法,研究了通过图像的形状特征和范围大小对热带气旋云系进行自动识别,得到了较好的效果。这种方法有助于提高热带气旋云系识别的自动化程度,实现热带气旋的自动跟踪,从而为热带气旋的预报提供了便利。 相似文献
15.
16.
Uplift response of symmetrical anchor plates with and without grid fixed reinforced (GFR) reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer (FRP) strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern. 相似文献
17.
18.
在分析海洋环境标量场要素数据特点,了解常规的海洋环境要素分析和可视化表达方式的基础上,对在三维球体模型上实现海洋标量场要素时空分析和可视化表达的方法和技术进行了研究.提出了海洋标量场要素数据的三维空间数据模型,以此为基础利用VC与Open GL技术实现纹理数据的实时绘制,并采用基于对象的方法在三维球体上对其进行可视化表达,实现了真正意义上基于地球球体模型的海洋标量场要素的可视化.该基于球体的可视化方式能更好地表现研究对象的区域特点,特别是在进行大范围区域乃至全球性研究时更具优势.同时,通过按需进行数据抽取,系统在数据加载效率与数据承载总量上都有所提高,在"数字海洋"原型系统中目前已经加载了全球范围多个精度的温度、盐度、密度、声速等标量场数据,并实现了业务化运行. 相似文献