共查询到20条相似文献，搜索用时 640 毫秒
1.
The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation. 相似文献
2.
Reflection from submerged cylinders are studied by means of integral equations. By expressing the solution as a distribution of vortices, the integral equations become non-singular for closed contours. It is shown that the method gives a short and easy proof for the classical result that no reflection occurs for the circular cylinder. The reflection power for the elliptic contour and the flat plate are studied when the bodies are situated deeply below the surface. 相似文献
3.
Theoretical investigations on solitary waves interacting with a surface-piercing concentric porous cylinder system are presented in this paper. The outer cylinder is porous and considered thin in thickness, while the inner cylinder is solid. Both cylinders are rigidly fixed on the bottom. Following Isaacson's [Isaacson, Micheal de St. Q., 1983. Solitary wave diffraction around large cylinder. Journal of the Waterway, Port, Coastal and Ocean Engineering 109(1), 121–127.] approach, we obtained the solutions for free-surface elevation and the corresponding velocity potential in terms of Fourier integrals. Numerical results are presented to show the effects of incident wave condition, porosity of the outer cylinder and radius ratio on wave forces and wave elevations around the inner and outer cylinders. 相似文献
4.
Qiu Dahong 《中国海洋工程》1992,(2)
Based on the 1st order cnoidal wave theory, the nonlinear wave diffraction around a circular cylinder in shallow water is studied in this paper. The equation of the wave surface around the cylinder is formulated and by using this formula the wave surface elevation on the cylinder surface can be obtained. In this paper, the formula for calculating the cnoidal wave force on a circular cylinder is also derived. For the wave conditions which are often encountered in practical engineering designs, the ratios of the nonlinear wave forces to the linear wave forces are calculated, and the results are plotted in this paper for design purposes. In order to verify the theoretical results, model tests are conducted. After comparing the test results with the theoretical ones, it is concluded that, in shallow water, for the case of T g / d~(1/2) > 8-10 and H / d > 0.3, the cnoidal wave theory should be used to calculate the wave action on a cylindrical pier. 相似文献
5.
波浪作用下海上墩式建筑物周围局部冲刷的试验研究 总被引：3，自引：1，他引：3
本文主要是通过试验研究和分析手段，对波动场的海上墩式建筑物周围的冲刷机理、冲刷形态进行探讨，对最大冲刷深度及其发生位置提出满足近海工程需要的预报公式，最后对动床模型律进行探讨。 相似文献
6.
结合工程实例,介绍了座床式圆筒码头基床整平所采用的"下直钢轨与刮道结合进行园环形基床整平"方案及其实施步骤,实验结果表明,该技术方案具有整平面积小、效率高、成本低等优点,为圆筒机床水下施工提供了重要科学依据。 相似文献
7.
In this paper, theoretical study is carried out to investigate the general 3D short-crested wave interaction with a concentric two-cylinder system. The interior cylinder is impermeable and the exterior cylinder is thin in thickness and porous to protect the interior cylinder. Both cylinders are surface-piercing and bottom mounted. Analytical solution is derived based on the linear potential theory. The effects of the wide range wave parameters and structure configuration including porosity of the exterior cylinder and the annular spacing on the wave forces, surface elevations and the diffracted wave contours are examined. 相似文献
8.
Zang Jun Qiu Dahong
Doctor Assistant Researcher State Key Laboratory of Coastal Offshore Engineering Dalian University of Technology 《中国海洋工程》1995,(1)
Wave-induced seepage force acting on cylinder groups is studied by using Biot consolidation theory in this paper. Both tandem arrangement and side by side arrangement are considered simultaneously. The variations of the coefficient of grouping effect with the distance between cylinders for different KD are discussed. In order to verify the numerical solution, several sets of experiments are conducted. The agreement between numerical and experimental solutions is satisfactory. 相似文献
9.
基于局部冲刷研究的大型圆柱周围波浪特性分析 总被引：2，自引：0，他引：2
波浪环境下,大型圆柱的存在改变了周围原有波浪条件,直接导致局部冲刷。利用MacCamy和Fuchs的绕射理论对相对柱径较大(0.15相似文献
10.
The in-line response of a vertical flexibly mounted cylinder in regular and random waves is reported.Both theoretical analyses and experimental measurements have been performed.The theoretical predictions are based on the Morison equation which is solved by the incremental harmonic balance method.Experiments are then performed in a wave flume to determine the accuracy of the Morison equation in predicting the in-line response of the cylinder in regular and random waves.The interaction between waves and vibrating cylinders are investigated. 相似文献
11.
结合工程实例 ,介绍了座床式大圆筒结构防波堤和码头基床整平所采用的“下钢轨拉线整平”方案、“十点验收法”及其实施步骤 ,并对该整平方案的优点进行了分析和总结。 相似文献
12.
The main purpose of this study is to establish a better understanding of the relationship between drag reduction and surface roughness. Experiments were conducted to measure the force and flow characteristics of a circular cylinder with different types of artificial surface roughness over the range 6 × 103 < Re < 8 × 104 (Re is based on the cylinder diameter D). The roughness cylinder was formed by covering the exterior surface of the cylinder with uniformly distributed (1) sandpaper, (2) netting, and (3) dimples. The roughness coefficient ranged from k/D = 0.0028 to 0.025 (k is the roughness height). A detailed quantitative measurement of the flow field around the cylinder using Particle Imaging Velocimetry (PIV) was carried out. The hydrodynamic force coefficients (drag and lift) of the rough cylinders are compared against those of a smooth cylinder measured under the same flow conditions. It is found that certain configuration of surface roughness significantly reduces the mean drag coefficient of the cylinder, particularly at large Reynolds numbers. In addition, the root-mean-square (r.m.s.) lift coefficient of the rough cylinders is considerably lower than that of a smooth cylinder. 相似文献
13.
14.
两层粘性流体中圆柱体受迫振荡数值模拟 总被引：1，自引：1，他引：1
研究两层粘性流体中无限长水平圆柱体的受迫振荡问题。在湍流模式下,采用VOF方法追踪两层流体的内界面,基于动网格技术模拟圆柱体的运动边界,对均匀流中横向振荡圆柱体的绕流场进行了数值模拟。计算受迫振荡圆柱体的升力系数、阻力系数随时间的演化曲线和圆柱体的尾涡分布,以及圆柱体的受迫振荡激发两层流体内界面的扰动,并与均匀流体的情况进行了比较分析。研究表明,流体的两层分层效应对受迫振荡圆柱体的升阻力系数和尾涡分布特性都有显著影响,在水下输油气管道涡激振动特性的工程评估中,应考虑流体的密度分层效应。 相似文献
15.
Hakan Akyildiz 《Ocean Engineering》2002,29(9):1119-1132
The experimental investigations on the pressure distribution around a large vertical cylinder fixed on a wave channel, piercing the free surface and subjected to regular waves have been carried out. Recently, considerable advances have been made in the development of analytical techniques for studying non-linear wave loading phenomena on large structures. However, there is a lack of high quality experimental data that may be used for validating the analytical and numerical solutions obtained. This paper describes the design and execution of an experiment conducted at the Hydraulics Laboratory in the Civil Engineering Department of the Istanbul Technical University. Experimental measurements of pressures at different locations are presented including comparisons with the computational results. This study showed that the experimental and computational results generally exhibited better correlation, however, the measured pressure values diverged from the computational results while approaching the free surface. 相似文献
16.
关于气浮筒群结构的静稳性 总被引：3，自引：1，他引：3
讨论了气浮筒群结构的静稳性问题 ,以三筒组合为算例 ,变化干舷、升沉和绕x轴、y轴的倾角α、β ,给出了静稳性的算法和初步结果。指出存在四个相关的姿态角 ,最后讨论了初始参数干舷的选取 相似文献
17.
The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements. 相似文献
18.
波浪作用下大尺径圆柱周围局部冲刷 总被引：3，自引：0，他引：3
通过系列模型试验，对波浪作用下墩柱周围局部冲刷地形及其形成机理进行了分析，认为最大冲刷深度发生在墩柱前方，与防波堤前冲淤形态类似，分为细沙型和粗沙型。在对各影响因子分析基础上，提出墩柱周围最大冲刷深度计算公式，试验资料表明，该公式与试验值有着良好的一致性。 相似文献
19.
A series of experimental studies about the force of internal solitary wave and internal periodic wave on vertical cylinders have been carried out in a two-dimensional layered internal wave flume. The internal solitary waves are produced by means of gravitational collapse at the layer thickness ratio of 0.2, and the internal periodic waves are produced with rocker-flap wave maker at the layer thickness ratio of 0.93. The wave parameters are obtained through dyeing photography. The vertical cylinders of the same size are arranged in different depths. The horizontal force on each cylinder is measured and the vertical distribution rules are researched. The internal wave heights are changed to study the impact of wave heights on the force. The results show that the horizontal force of concave type internal solitary wave on vertical cylinder in the upper-layer fluid has the same direction as the wave propagating, while it has an opposite direction in the lower-layer. The horizontal force is not evenly distributed in the lower fluid. And the force at different depths increases along with wave height. Internal solitary wave can produce an impact load on the entire pile. The horizontal force of internal periodic waves on the vertical cylinders is periodically changed at the frequency of waves. The direction of the force is opposite in the upper and lower layers, and the value is close. In the upper layer except the depth close to the interface, the force is evenly distributed; but it tends to decrease with the deeper depth in the lower layer. A periodic shear load can be produced on the entire pile by internal periodic waves, and it may cause fatigue damage to structures. 相似文献
20.
固壁附近水平圆柱在波浪水流共存场中的流动显示及水动力特征 总被引：3，自引：0，他引：3
固壁附近的水平的圆柱体在波浪、波流作用下的受力情况与其周围的流场状态密切相关。为探讨圆柱形成的机理，应当对流场的涡结构有充分的认识，受力过程与记演化过程的同步分析万为重要。本文通过实验研究并对比数值分析的结果，对波浪、波流场中圆柱体受力与流场状态的关系做一初步讨论。 相似文献