首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Terrestrial cosmogenic nuclide concentrations in sediment are used to quantify mean denudation rates in catchments. This article explores the differences between the 10Be concentration in fine (sand) and in coarse (1–3 or 5–10 cm pebbles) river sediment. Sand and pebbles were sampled at four locations in the Huasco Valley, in the arid Chilean Andes. Sand has 10Be concentrations between 4.8 and 8.3·105 at g−1, while pebbles have smaller concentrations between 2.2 and 3.3·105 at g−1. It appears that the different concentrations, systematically measured between sand and pebbles, are the result of different denudation rates, linked with the geomorphologic processes that originated them. We propose that the 10Be concentrations in sand are determined by the mean denudation rate of all of the geomorphologic processes taking place in the catchment, including debris flow processes as well as slower processes such as hill slope diffusion. In contrast, the concentrations in pebbles are probably related to debris flows occurring in steep slopes. The mean denudation rates calculated in the catchment are between 30 and 50 m/Myr, while the denudation rates associated with debris flow are between 59 and 81 m/Myr. These denudation rates are consistent with those calculated using different methods, such as measuring eroded volumes.  相似文献   

2.
Based on cosmogenic 10Be and 26Al analyses in 15 individual detrital quartz pebbles (16–21 mm) and cosmogenic 10Be in amalgamated medium sand (0.25–0.50 mm), all collected from the outlet of the upper Gaub River catchment in Namibia, quartz pebbles yield a substantially lower average denudation rate than those yielded by the amalgamated sand sample. 10Be and 26Al concentrations in the 15 individual pebbles span nearly two orders of magnitude (0.22 ± 0.01 to 20.74 ± 0.52 × 106 10Be atoms g−1 and 1.35 ± 0.09 to 72.76 ± 2.04 × 106 26Al atoms g−1, respectively) and yield average denudation rates of ∼0.7 m Myr−1 (10Be) and ∼0.9 m Myr−1 (26Al). In contrast, the amalgamated sand yields an average 10Be concentration of 0.77 ± 0.03 × 106 atoms g−1, and an associated mean denudation rate of 9.6 ± 1.1 m Myr−1, an order of magnitude greater than the rates obtained for the amalgamated pebbles. The inconsistency between the 10Be and 26Al in the pebbles and the 10Be in the amalgamated sand is likely due to the combined effect of differential sediment sourcing and longer sediment transport times for the pebbles compared to the sand-sized grains. The amalgamated sands leaving the catchment are an aggregate of grains originating from all quartz-bearing rocks in all parts of the catchment. Thus, the cosmogenic nuclide inventories of these sands record the overall average lowering rate of the landscape. The pebbles originate from quartz vein outcrops throughout the catchment, and the episodic erosion of the latter means that the pebbles will have higher nuclide inventories than the surrounding bedrock and soil, and therefore also higher than the amalgamated sand grains. The order-of-magnitude grain size bias observed in the Gaub has important implications for using cosmogenic nuclide abundances in depositional surfaces because in arid environments, akin to our study catchment, pebble-sized clasts yield substantially underestimated palaeo-denudation rates. Our results highlight the importance of carefully considering geomorphology and grain size when interpreting cosmogenic nuclide data in depositional surfaces.  相似文献   

3.
Although beryllium‐10 (10Be) concentrations in stream sediments provide useful synoptic views of catchment‐wide erosion rates, little is known on the relative contributions of different sediment supply mechanisms to the acquisition of their initial signature in the headwaters. Here we address this issue by conducting a 10Be‐budget of detrital materials that characterize the morphogenetic domains representative of high‐altitude environments of the European Alps. We focus on the Etages catchment, located in the Ecrins‐Pelvoux massif (southeast France), and illustrate how in situ 10Be concentrations can be used for tracing the origin of the sand fraction from the bedload in the trunk stream. The landscape of the Etages catchment is characterized by a geomorphic transient state, high topographic gradients, and a large variety of modern geomorphic domains ranging from glacial environments to scarcely vegetated alluvial plains. Beryllium‐10 concentrations measured in the Etages catchment vary from ~1 × 104 to 4.5 × 105 atoms per gram quartz, while displaying consistent 10Be signatures within each representative morphogenetic unit. We show that the basic requirements for inferring catchment‐wide denudation from 10Be concentration measurements are not satisfied in this small, dynamic catchment. However, the distinct 10Be signature observed for the geomorphic domains can be used as a tracer. We suggest that a terrestrial cosmogenic nuclide (TCN) budget approach provides a valuable tool for the tracing of material origin in basins where the ‘let nature do the averaging’ principles may be violated. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

4.
Sidewall erosion because of rockfalls is one of the most efficient erosional processes in the highest parts of mountain ranges; it is therefore important to quantify sidewall erosion to understand the long-term evolution of mountainous topography. In this study, we analyse how the 10Be concentration of supraglacial debris can be used to quantify sidewall erosion in a glaciated catchment. We first analyse, in a glaciated catchment, the cascade of processes that move a rock from a rockwall to a supraglacial location and propose a quantitative estimate of the number of rockfalls statistically mixed in a supraglacial sand sample. This model incorporates the size of the rockwall, a power law distribution of the size of the rockfalls and the mean glacial transport velocity. In the case of the Bossons glacier catchment (Mont Blanc massif), the 10Be concentrations obtained for supraglacial samples vary from 1.97 ± 0.24 to 23.82 ± 1.68 × 104 atoms g−1. Our analysis suggests that part of the 10Be concentration dispersion is related to an insufficient number of amalgamated rockfalls that does not erase the stochastic nature of the sidewall erosion. In the latter case, the concentration of several collected samples is averaged to increase the number of statistically amalgamated rockfalls. Variable and robust 10Be-derived rockwall retreat rates are obtained for three distinct rockfall zones in the Bossons catchment and are 0.19 ± 0.08 mm year−1, 0.54 ± 0.1 mm year−1 and 1.08 ± 0.17 mm year−1. The mean 10Be retreat rate for the whole catchment (ca. 0.65 mm year−1) is close to the present-day erosion rate derived from other methods. © 2019 John Wiley & Sons, Ltd.  相似文献   

5.
Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of 10Be, 21Ne and 26Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr–1), established with the noble gas 21Ne, is in accordance with palaeodenudation rates derived from 21Ne/10Be and 26Al/10Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide 21Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single 21Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

6.
Cosmogenic exposure dating of moraines during the last two decades has vastly improved knowledge on the timing of glaciation worldwide. Due to a variety of geologic complications, such as moraine degradation, snow cover, bedrock erosion and isotopic inheritance, samples from multiple large boulders (>1–2 m) often lead to the most accurate moraine age assignments. However, in many cases, large boulders are not available on moraines of interest. Here, I test the suitability of pebble collections from moraine crest surfaces as a sample type for exposure dating. Twenty-two 10Be ages from two Pleistocene lateral moraine crests in Pine Creek valley in the upper Arkansas River basin, Colorado, were calculated from both pebble and boulder samples. Ten 10Be ages from a single-crested Bull Lake lateral moraine range between 3 and 72 ka, with no statistical difference between pebble (n = 5) and boulder (n = 5) ages. The lack of a cluster of 10Be ages suggests that moraine degradation has led to anomalously young exposure ages. Twelve 10Be ages from a single-crested Pinedale lateral moraine have a bimodal age distribution; one mode is 22.0 ± 1.4 ka (three boulders, two pebble collections), the other is 15.2 ± 0.9 ka (two boulders, five pebble collections). The interpretation of the two age modes is that two glacier maxima of similar extent were attained during the late Pleistocene. Regardless of moraine age interpretations, that 10Be ages from pebble collections and boulders are indistinguishable on moraines of two different ages, and in two different age modes of the Pinedale moraine, suggests that pebble collections from moraine crests may serve as a suitable sample type in some settings.  相似文献   

7.
Rockwall slope erosion is defined for the upper Bhagirathi catchment using cosmogenic Beryllium-10 (10Be) concentrations in sediment from medial moraines on Gangotri glacier. Beryllium-10 concentrations range from 1.1 ± 0.2 to 2.7 ± 0.3 × 104 at/g SiO2, yielding rockwall slope erosion rates from 2.4 ± 0.4 to 6.9 ± 1.9 mm/a. Slope erosion rates are likely to have varied over space and time and responded to shifts in climate, geomorphic and/or tectonic regime throughout the late Quaternary. Geomorphic and sedimentological analyses confirm that the moraines are predominately composed of rockfall and avalanche debris mobilized from steep relief rockwall slopes via periglacial weathering processes. The glacial rockwall slope erosion affects sediment flux and storage of snow and ice at the catchment head on diurnal to millennial timescales, and more broadly influences catchment configuration and relief, glacier dynamics and microclimates. The slope erosion rates exceed the averaged catchment-wide and exhumation rates of Bhagirathi and the Garhwal region on geomorphic timescales (103−105 years), supporting the view that erosion at the headwaters can outpace the wider catchment. The 10Be concentrations of medial moraine sediment for the upper Bhagirathi catchment and the catchments of Chhota Shigri in Lahul, northern India and Baltoro glacier in Central Karakoram, Pakistan show a tentative relationship between 10Be concentration and precipitation. As such there is more rapid glacial rockwall slope erosion in the monsoon-influenced Lesser and Greater Himalaya compared to the semi-arid interior of the orogen. Rockwall slope erosion in the three study areas, and more broadly across the northwest Himalaya is likely governed by individual catchment dynamics that vary across space and time. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons, Ltd.  相似文献   

8.
Basin-wide erosion rates can be determined through the analysis of in situ-produced cosmogenic nuclides. In transient landscapes, and particularly in mountain catchments, erosion and transport processes are often highly variable and consequently the calculated erosion rates can be biased. This can be due to sediment pulses and poor mixing of sediment in the stream channels. The mixing of alluvial sediment is one of the principle conditions that need to be verified in order to have reliable results. In this paper we perform a field-based test of the extent of sediment mixing for a ∼42 km2 catchment in the Alps using concentrations of river-born 10Be. We use this technique to assess the mechanisms and the spatio-temporal scales for the mixing of sediment derived from hillslopes and tributary channels. The results show that sediment provenance and transport, and mixing processes have a substantial impact on the 10Be concentrations downstream of the confluence between streams and tributary channels. We also illustrate that the extent of mixing significantly depends on: the sizes of the catchments involved, the magnitude of the sediment delivery processes, the downstream distance of a sample site after a confluence, and the time since the event occurred. In particular, continuous soil creep and shallow landsliding supply high 10Be concentration material from the hillslope, congruently increasing the 10Be concentrations in the alluvial sediment. Contrariwise, a high frequency of mass-wasting processes or the occurrence of sporadic but large-magnitude events results in the supply of low-concentration sediment that lowers the cosmogenic nuclide concentration in the channels. The predominance of mass-wasting processes in a catchment can cause a strong bias in detrital cosmogenic nuclide concentrations, and therefore calculated erosion rates may be significantly over- or underestimated. Accordingly, it is important to sample as close as possible to the return-period of large-size sediment input events. This will lead to an erosion rate representative of the “mass-wasting signal” in case of generally high-frequency events, or the “background signal” when the event is sporadic. Our results suggest that a careful consideration of the extent of mixing of alluvial sediment is of primary importance for the correct estimation of 10Be-based erosion rates in mountain catchments, and likewise, that erosion rates have to be interpreted cautiously when the mixing conditions are unknown or mixing has not been achieved.  相似文献   

9.
A combination of numerical analysis and 10Be concentrations measured in sediment samples from the high‐relief Torrente catchment, southern Spain, allows us to investigate the sampling requirements for determining erosion rates using cosmogenic nuclides in high‐relief, landslide‐dominated terrain. We use simple modelling to quantify the effect of particle spalling and/or landsliding on erosion rates determined using a cosmogenic in‐situ produced isotope. Analytical results show that the cosmogenic nuclide concentration of a surface experiencing regular detachment of a grain or block may be considered to be in steady state, and ‘in‐situ’ erosion rates estimated, when an appropriate number of spatially independent samples are amalgamated. We present equations that enable calculation of the number of bedrock samples that must be amalgamated for the estimation of mean erosion rates on an outcrop experiencing regular detachment of a grain or chip of thickness L every T years. Our findings confirm that mean catchment erosion rates may be reliably estimated from 10Be concentrations in fluvial sediment in high‐relief rapidly eroding terrain. These catchment‐wide integrated erosion rates can be calculated where erosion is primarily accomplished through shallow (<3 m) spalling processes; where deep‐seated (>3 m) landslides are the dominant mode of erosion only minimum erosion rates can be determined. Lastly, we present erosion rate measurements from the Torrente catchment that reveal variation of two orders of magnitude (0·03–1·6 m ka?1) quantifying the high degree of spatial variation in erosion rates expected within rapidly uplifting catchments. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

10.
Understanding the extent to which local factors, including bedrock and structure, govern catchment denudation in mountainous environments as opposed to broader climate or tectonic patterns provides insight into how landscapes evolve as sediment is generated and transported through them, and whether they have approached steady-state equilibrium. We measured beryllium-10 (10Be) concentrations in 21 sediment samples from glaciated footwall and hanging wall catchments, including a set of nested catchments, and 12 bedrock samples in the Puga and Tso Morari half-grabens located in the high-elevation, arid Zanskar region of northern India. In the Puga half-graben where catchments are underlain by quartzo-feldspathic gneissic bedrock, bedrock along catchment divides is eroding very slowly, about 5 m/Ma, due to extreme aridity and 10Be concentrations in catchment sediments are the highest (~60–90 × 105 atoms/g SiO2) as colluvium accumulates on hillslopes, decoupled from their ephemeral streams. At Puga, 10Be concentrations and the average erosion rates of a set of six nested catchments demonstrate that catchment denudation is transport-limited as sediment stagnates on lower slopes before reaching the catchment outlet. In the Tso Morari half-graben, gneissic bedrock is also eroding very slowly but 10Be concentrations in sediments in catchments underlain by low grade meta-sedimentary rocks, are significantly lower (~10–35 × 105 atoms/g SiO2). In these arid, high-elevation environments, 10Be concentrations in catchment sediments have more to do with bedrock weathering and transport times than steady-state denudation rates. © 2020 John Wiley & Sons, Ltd.  相似文献   

11.
Inner gorges often result from the propagation of erosional waves related to glacial/interglacial climate shifts. However, only few studies have quantified the modern erosional response to this glacial conditioning. Here, we report in situ 10Be data from the 64 km2 Entlen catchment (Swiss Alps). This basin hosts a 7 km long central inner gorge with two tributaries that are >100 m‐deeply incised into thick glacial till and bedrock. The 10Be concentrations measured at the downstream end of the gorge yield a catchment‐wide erosion rate of 0.42 ± 0.04 mm yr‐1, while erosion rates are consistently lower upstream of the inner gorge, ranging from 0.14 ± 0.01 mm yr‐1 to 0.23 ± 0.02 mm yr‐1. However, 10Be‐based sediment budget calculations yield rates of ~1.3 mm yr‐1 for the inner gorge of the trunk stream. Likewise, in the two incised tributary reaches, erosion rates are ~2.0 mm yr‐1 and ~1.9 mm yr‐1. Moreover, at the erosional front of the gorge, we measured bedrock incision rates ranging from ~2.5 mm yr‐1 to ~3.8 mm yr‐1. These rates, however, are too low to infer a post‐glacial age (15–20 ka) for the gorge initiation. This would require erosion rates that are between 2 and 6 times higher than present‐day estimates. However, the downcutting into unconsolidated glacial till favored high erosion rates through knickzone propagation immediately after the retreat of the LGM glaciers, and subsequent hillslope relaxation led to a progressive decrease in erosion rates. This hypothesis of a two‐ to sixfold decrease in erosion rates does not conflict with the 10Be‐based erosion rate budgets, because the modern erosional time scale recorded by 10Be cover the past 2–3 ka only. These results point to the acceleration of Holocene erosion in response to the glacial overprint of the landscape. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
We examine 10Be concentration in two pit profiles in the Parkajoki area at ∼67°N on the northern Fennoscandian shield in northern Sweden. Due to repeated cover by cold-based, non-erosive ice sheets, the area retains many relict non-glacial features, including tors and saprolites. In the examined pit profiles, gruss-type saprolite developed from weathering of intermediate igneous rocks is overlain unconformably by Weichselian till.Our results show that 10Be concentrations found in the till greatly exceed the levels of 10Be that can have accumulated since deglaciation at ∼11 ka and are comparable to those reported from Pliocene and Early Pleistocene tills in North America. Old tills with grussified boulders at depth were excavated in the Parkajoki area and correlations with neighbouring parts of Finland indicate a Middle Pleistocene or older age. Evidence from pit excavations and geochemistry shows that the underlying saprolites have been truncated by glacial erosion and that previously weathered material has been incorporated into the till sequence. Hence, 10Be inventories in the tills are dominated by material recycled from Middle Pleistocene or older soils, near-surface sediments and saprolite, and cannot be used to date the periods of till deposition. The retention of relict 10Be in the tills nonetheless confirms minimal glacial erosion.Concentrations of meteoric 10Be in the saprolites are lower than any reported saprolite concentrations measured in other settings. Uncertainty in the pre-glaciation 10Be concentrations in the saprolites makes age determinations difficult. One possibility is that that the saprolite had higher 10Be concentrations in the past but that saprolite formation ended after glaciation and burial by till and that the 10Be has substantially decayed. Modelling of the meteoric 10Be depth profiles in this case suggests that the saprolites in the Parkajoki area were formed at a minimum of 2 Ma. Erosion of the saprolite allows an older age of up to ∼5 Ma, with up to 250 cm of material removed and incorporated into later tills. A second possibility is that concentrations of meteoric 10Be in the saprolite were originally lower, with formation of the saprolite in a period or periods of ice- and permafrost-free conditions before 0.8 Ma.  相似文献   

13.
The upland planation surface in the Piedmont of central New Jersey consists of summit flats, as much as 130 km2 in area, that truncate bedding and structure in diabase, basalt, sandstone, mudstone and gneiss. These flats define a low‐relief regional surface that corresponds in elevation to residual hills in the adjacent Coastal Plain capped by a fluvial gravel of late Miocene age. A Pliocene fluvial sand is inset 50 m below the upland features. These associations suggest a late Miocene or early Pliocene age for the surface. To assess exposure age and erosional history, a 4·4 m core of clayey diabase saprolite on a 3 km2 remnant of the surface was sampled at six depths for atmospherically produced cosmogenic 10Be. The measured inventory, assuming a deposition rate of 1·3 × 106 atoms cm−2 a−1, yields a minimum exposure age of 227 000 years, or, assuming continuous surface erosion, a constant erosion rate of 10 m Ma−1. Because the sample site lies about 60 m above the aggradation surface of the Pliocene fluvial deposit, and itself supports a pre‐Pliocene fluvial gravel lag, this erosion rate is too high. Rather, episodic surface erosion and runoff bypassing probably have produced an inventory deficit. Reasonable estimates of surface erosion (up to 10 m) and bypassing (up to 50 per cent of total precipitation) yield exposure ages of as much as 6·4 Ma. These results indicate that (1) the surface is probably of pre‐Pleistocene age and has been modified by Pleistocene erosion, and (2) exposure ages based on 10Be inventories are highly sensitive to surface erosion and runoff bypassing. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

14.
Quantifying the removal of co‐seismic landslide material after a large‐magnitude earthquake is central to our understanding of geomorphic recovery from seismic events and the topographic evolution of tectonically active mountain ranges. In order to gain more insight into the fluvial erosion response to co‐seismic landslides, we focus on the sediment fluxes of rivers flowing through the rupture zone of the 2008 Mw 7.9 Wenchuan earthquake in the Longmen Shan of the eastern Tibetan Plateau. Over the post‐seismic period of 2008–2013, we annually collected river sediment samples (0.25–1 mm) at 19 locations and measured the concentration of cosmogenic 10Be in quartz. When compared with published pre‐earthquake data, the 10Be concentrations declined dramatically after the earthquake at all sampling sites, but with significant spatial differences in the amplitude of this decrease, and were starting to increase toward pre‐earthquake level in several basins over the 5‐year survey. Our analysis shows that the amplitude of 10Be decrease is controlled by the amount of landslides directly connected to the river network. Calculations based on 10Be mixing budgets indicate that the sediment flux of the 0.25–1 mm size fraction increased up to sixfold following the Wenchuan earthquake. Our results also suggest that fluvial erosion became supply limited shortly after the earthquake, and predict that it could take a few years to several decades for fluvial sediment fluxes to go back to pre‐earthquake characteristics, depending on catchment properties. We also estimate that it will take at least decades and possibly up to thousands of years to remove the co‐seismic landslide materials from the catchments in the Longmen Shan. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

15.
Terrestrial cosmogenic nuclides (TCN) have widely been used as proxies in determining denudation rates in catchments. Most studies were limited to samples from modern active streams, thus little is known about the magnitude and causes of TCN variability on millennial time scales. In this work we present a 6 kyrs long, high resolution record of 10Be concentrations (n = 18), which were measured in sediment cores from an alluvial fan delta at the outlet of the Fedoz Valley in the Swiss Alps. This record is paired with a 3‐year time series (n = 4) of 10Be measured in sediment from the active stream currently feeding this fan delta. The temporal trend in the 10Be concentrations after correction for postdepositional production of 10Be was found to be overall constant and in good agreement with the modern river 10Be concentration. The calculated mean catchment‐wide denudation rate amounts to 0.73 ± 0.18 mm yr?1. This fairly constant level of 10Be concentrations can be caused by a constant denudation rate over time within the catchment or alternatively by a buffered signal. In this contribution we suggest that the large alluvial floodplain in the Fedoz Valley may act as an efficient buffer on Holocene time scales in which sediments with different 10Be signatures are mixed. Therefore, presumable variations in the 10Be signals derived from changes in denudation under a fluctuating Holocene climate are only poorly transferred to the catchment outlet and not recorded in the 10Be record. However, despite the absence of high frequency signals, we propose that the buffered and averaged 10Be signal could be meaningfully and faithfully interpreted in terms of long‐term catchment‐averaged denudation rate. Our study suggests that alluvial buffers play an important role in regulating the 10Be signal exported by some alpine settings that needs to be taken into account and further investigated. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

16.
Meteoric 10Be, due to its high affinity with soil and sediment particles, is widely used in geomorphologic and environmental studies attempting to evaluate the soil production/denudation rates or soil ages up to 107 years. However, the evolution of the 10Be distribution as a function of depth is poorly known in soils as revealed by recent reviews (Graly et al., 2010; Willenbring and von Blanckenburg, 2010). In this study, 10Be concentrations in the bulk and the 0–2 μm (lutum) granulometric fraction of samples along Luvisols profiles developed from loess in Northern France have been measured. The bulk 10Be concentrations are significantly higher in one of the three sites, likely reflecting differences in the inherited 10Be concentrations of the loess parent material as well as in the accumulation rates of the later. However, the bulk 10Be concentrations along all profiles are significantly correlated with the lutum (0–2 μm fraction) content, the maximum 10Be concentrations being evidenced in the Bt-horizon. Dominant adsorption of 10Be to the lutum has been furthermore corroborated by the mass-balance calculations with as much as 79.8 ± 9.0% of 10Be being associated with the lutum. Contrary to the bulk 10Be concentrations, the lutum 10Be concentrations showed several maxima coinciding with shifts in the coarse to fine silt ratio. This was interpreted as a change in the loess deposit dynamic. Finally, using numerical modeling approach based on the advection-diffusion equation, an average downward migration of 10Be by clay translocation was estimated. It ranges from 0.01 to 0.08 cm yr−1. Inherited 10Be in the loess parent material represented from 64 to 71% of the total 10Be content in the simulated soils. Vertical 10Be distributions and their maximum concentrations in the Bt-horizon thus mainly result from redistribution of the inherited 10Be by clay translocation and bioturbation.  相似文献   

17.
Existing methods of cosmogenic nuclide burial dating perform well provided that sediment sources undergo steady rates of erosion and the samples experience continuous exposure to cosmic rays. These premises exert important limitations on the applicability of the methods. And yet, high mountain sediment sources are rife with transient processes, such as non-steady erosion by glacial quarrying and/or landsliding, or temporary cosmic-ray shielding beneath glaciers and/or sediment. As well as breaching the premises of existing burial dating methods, such processes yield samples with low nuclide abundances and variable 26Al/10Be ratios that may foil both isochron and simple burial-age solutions. P–PINI (Particle-Pathway Inversion of Nuclide Inventories) is a new dating tool designed for dating the burial of sediments sourced from landscapes characterized by abrupt, non-steady erosion, discontinuous exposure, and catchments with elevation-dependent 26Al/10Be production ratios. P–PINI merges a Monte Carlo simulator with established cosmogenic nuclide production equations to simulate millions of samples (10Be–26Al inventories). The simulated samples are compared statistically with 10Be–26Al measured in field samples to define the most probable burial age. Here, we target three published 10Be–26Al datasets to demonstrate the versatility of the P–PINI model for dating fluvial and glacial sediments. (1) The first case serves as a robust validation of P–PINI. For the Pulu fluvial gravels (China), we obtain a burial age of 1.27 ± 0.10 Ma (1σ), which accords with the isochron burial age and two independent chronometers reported in Zhao et al. (2016) Quaternary Geochronology 34, 75–80. The second and third cases, however, reveal marked divergence between P–PINI and isochron-derived ages. (2) For the fluvial Nenana Gravel (USA), we obtain a minimum-limiting burial age of 4.5 ± 0.7 Ma (1σ), which is compatible with unroofing of the Alaska Range starting ∼ 6 Ma, while calling into question the Early Pleistocene isochron burial age presented in Sortor et al. (2021) Geology 49, 1473–1477. (3) For the Bünten Till (Switzerland), we obtain a limiting burial age of <204 ka (95th percentile range), which conforms with the classical notion of the most extensive glaciation in the northern Alpine Foreland assigned to the Riss glaciation (sensu marine isotope stage 6) contrary to the isochron burial age presented in Dieleman et al. (2022) Geosciences, 12, 39. Discrepancies between P–PINI and the isochron ages are rooted in the challenges posed by the diverse pre-burial 26Al/10Be ratios produced under conditions characteristic of high mountain landscapes; i.e., non-steady erosion, discontinuous cosmic-ray exposure, and elevation-dependent 26Al/10Be production ratios in the source region, which are incompatible with the isochron method, but easily accommodated by the stochastic design of P–PINI.  相似文献   

18.
Extreme erosion events can produce large short-term sediment fluxes. Such events complicate erosion rates estimated from cosmogenic nuclide concentrations in river sediment by providing sediment with a concentration different from the long-term basin average. We present a detrital 10Be study in southern Taiwan, with multiple samples obtained in a time sequence bracketing the 2009 Typhoon Morakot, to assess the impact of landslide sediment on 10Be concentrations (N10Be) in river sediment. Sediment samples were collected from 13 major basins, two or three times over the last decade, to observe the temporal variation of N10Be. Landslide inventories with time intervals of 5–6 years were used to quantify sediment flux changes. A negative correlation between N10Be and landslide areal density indicates dilution of N10Be by landslide sediment. Denudation rates estimated from the diluted N10Be can be up to three times higher than the lowest rate derived from the same basins. Observed increases imply that, 3 years after the passage of Typhoon Morakot, fluvial channels still contain a considerable amount of sediment provided by hillslope landslides during the event. However, higher N10Be in 2016 samples indicate that the contribution from landslide sediment at the sampled grain size has decreased with time. The correlation between changes in N10Be and landslide area and volume is not strong, likely resulting from the stochastic and complex nature of sediment transport. To simultaneously evaluate the volume of landslide-derived sediment and estimate the background denudation rate, associated with less impulsive sediment supply, we constructed a sediment-mixing model with the time series of N10Be and landslide inventories. The spatial pattern of background erosion rate in southern Taiwan is consistent with the regional tectonic framework, indicating that the landscape is evolving mainly in response to the tectonic forcing, and this signal is modified, but not obscured by impulsive sediment supply. © 2019 John Wiley & Sons, Ltd.  相似文献   

19.
Well-dated records of tropical glacier fluctuations are essential for developing hypotheses and testing proposed mechanisms for past climate changes. Since organic material for radiocarbon dating is typically scarce in low-latitude, high-altitude environments, surface exposure-age dating, based on the measurement of in situ produced cosmogenic nuclides, provides much of the chronologic information on tropical glacier moraines. Here, we present a locally calibrated 10Be production rate for a low-latitude, high-altitude site near Quelccaya Ice Cap (∼13.95°S, 70.89°W, 4857 m asl) in the southeastern Peruvian Andes. Using an independent age (12.35 +0.2, −0.02 ka) of the late glacial Huancané IIa moraines based on thirty-four bracketing radiocarbon ages and twelve 10Be concentrations of boulders on the moraines, we determine a local production rate of 43.28 ± 2.69 atoms gram−1 year−1 (at g−1 yr−1). Reference 10Be production rates (i.e., production rates by neutron spallation appropriate for sea-level, high-latitude sites) range from 3.97 ± 0.09 to 3.78 ± 0.09 at g−1 yr−1, determined using scaling after Lal (1991) and Stone (2000) and depending on our assumed boulder surface erosion rate. Since our boulder surface erosion rate estimate is a minimum value, these reference production rates are also minimum values. A secondary control site on the Huancané IIIb moraines suggests that the 10Be production rates are at least as low as, or possibly lower than, those derived from the Huancané IIa moraines. These sea-level, high-latitude production rates are at least 11–15% lower than values derived using the traditional global calibration dataset, and they are also lower than those derived from the late glacial Breque moraine in the Cordillera Blanca of Peru. However, our sea-level, high-latitude production rates agree well with recently published, locally calibrated production rates from the Arctic, New Zealand, and Patagonia. The production rates presented here should be used to calculate 10Be exposure ages in low-latitude, high-altitude locations, particularly in the tropical Andes, and should improve the ability to compare the results of studies using 10Be exposure-age dating with other chronological data.  相似文献   

20.
We examine the sensitivity of 10Be concentrations (and derived denudation rates), to debris-flow and anthropogenic perturbations in steep settings of the Eastern Alps, and explore possible relations with structural geomorphic connectivity. Using cosmogenic 10Be as a tracer for functional geomorphic connectivity, we conduct sampling replications across four seasons in Gadria, Strimm and Allitz Creek. Sampling sites encompass a range of structural connectivity configurations, including the conditioning of a sackung, all assessed through a geomorphometric index (IC). By combining information on contemporary depth of erosion and sediment yield, disturbance history and post-LGM (Last Glacial Maximum) sedimentation rates, we constrain the effects of debris-flow disturbance on 10Be concentrations at the Gadria sites. Here, we argue that bedrock weakening imparted by the sackung promotes high depth of erosion. Consequently, debris flows recruit sediment beyond the critical depth of spallogenic production (e.g., >3 m), which in turn, episodically, due to predominantly muogenic production pathways, lowers 10Be concentration by a factor of 4, for at least 2 years. In contrast, steady erosion in Strimm Creek yields very stable 10Be concentrations through time. In Allitz Creek, we observe two- to fourfold seasonal fluctuations in 10Be concentrations, which we explain as the combined effects of water diversion and hydraulic structures on sediment mixing. We further show that 10Be concentration correlates inversely with the IC index, where sub-basins characterized by high concentrations (long residence times) exhibit low IC values (structurally disconnected) and vice versa, implying that, over millennial time scales a direct relation exists between functional and structural connectivity, and that the IC index performed as a suitable metric for structural connectivity. The index performs comparably better than other metrics (i.e., mean slope and mean normalized channel steepness index) previously used to assess topographic controls on denudation rates in active unglaciated ranges. In terms of landscape evolution, we argue that the sackung, by favouring intense debris-flow activity across the Holocene, has aided rapid postglacial reshaping of the Gadria basin, which currently exhibits a topographic signature characteristic of unglaciated debris-flow systems. © 2020 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号