首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 312 毫秒
1.
There are many observations in naturally deformed rocks on the effects of mineral reactions on deformation, but few experimental data. In order to study the effects of chemical disequilibrium on deformation we have investigated the hydration reaction plagioclase + H2OM more albitic plagioclase + zoisite + kyanite + quartz. We utilized fine-grained (2-6 µm) plagioclase aggregates of two compositions (An54 and An60), both dried and with 0.1-0.4 wt% H2O present, in shear deformation experiments at two sets of conditions: 900 °C, 1.0 GPa (in the plagioclase stability field) and 750 °C, 1.5 GPa (in the zoisite stability field). Dry samples and those deformed in the plagioclase stability field underwent homogeneous shearing by dislocation creep, but samples with 0.1 to 0.4 wt% water deformed in the zoisite stability field showed extreme strain localization into very narrow (~1-3 µm) shear bands after low shear strain. In these samples the microstructures of reaction products in the matrix differ from those in the shear bands. In the matrix, large (up to 400 µm) zoisite crystals grew in the direction of finite extension, and relict plagioclase grains are surrounded by rims of recrystallized grains that are more albitic. In the shear bands, the reaction products albitic plagioclase, zoisite, white mica, and traces of kyanite form polyphase aggregates of very fine-grained (<0.1 µm) dislocation-free grains. Most of the sample strain after % ~2 has occurred within the shear bands, within which the dominant deformation mechanism is inferred to be diffusion-accommodated grain boundary sliding (DAGBS). The switch from dislocation creep in dry samples deformed without reaction to DAGBS in reacted samples is associated with a decrease in flow stress from ~800 to <200 MPa. These experiments demonstrate that heterogeneous nucleation driven in part by chemical disequilibrium can produce an extremely fine-grained polyphase assemblage, leading to a switch in deformation mechanism and significant weakening. Thus, localization of deformation in polyphase rocks may occur on any pressure (P),temperature (T)-path where the equilibrium composition of the constituent minerals changes.  相似文献   

2.
The inherited localization model for shear zone development suggests that ductile deformation in the middle and lower continental crust is localized on mechanical anisotropies, like fractures, referred to as shear zone brittle precursors. In the Neves area (Western Tauern Window, Eastern Alps), although the structural control of these brittle precursors on ductile strain localization is well established, the relative timing of the brittle deformation and associated localized fluid flow with respect to ductile deformation remains in most cases a matter of debate. The present petrological study, carried out on a brittle precursor of a shear zone affecting the Neves metagranodiorite, aims to determine whether brittle and ductile deformations are concomitant and therefore relate to the same tectonic event. The brittle precursor consists of a 100–500 µm wide recrystallized zone with a host mineral‐controlled stable mineral assemblage composed of plagioclase–garnet–quartz–biotite–zoisite±white mica±pyrite. Plagioclase and garnet preserve an internal compositional zoning interpreted as the fingerprint of Alpine metamorphism and fluid–rock interactions concomitant with the brittle deformation. Phase equilibrium modelling of this garnet‐bearing brittle precursor shows that metamorphic garnet and plagioclase both nucleated at 0.6 ± 0.05 GPa, 500 ± 20°C and then grew along a prograde path to 0.75 ± 0.05 GPa, 530 ± 20°C. These amphibolite facies conditions are similar to those inferred from ductile shear zones from the same area, suggesting that both brittle and ductile deformation were active in the ductile realm above 500°C for a depth range between 17 and 21 km. We speculate that the Neves area fulfils most of the required conditions to have hosted slow earthquakes during Alpine continental collision, that is, coupled frictional and viscous deformation under high‐fluid pressure conditions ~450°C. Further investigation of this potential geological record is required to demonstrate that slow earthquakes may not be restricted to subduction zones but are also very likely to occur in modern continental collision settings.  相似文献   

3.
周文孝  葛梦春 《地球科学》2013,38(4):715-724
通过大比例尺填图和剖面研究, 将内蒙古锡林浩特地区的"锡林郭勒杂岩"解体分为3大部分: 一套表壳岩、晚元古代基性-超基性侵入岩和早古生代酸性侵入岩.在此基础上根据变质岩的岩性组合和变形变质特点, 可将其中的表壳岩化分为4个岩性段: 黑云(石榴石)斜长片麻岩, 间夹多层条纹状斜长角闪岩, 在其顶部多见薄层含磁铁石英岩; 中粗粒黑云斜长片麻岩和细粒长英质片麻岩; 混合岩化条带状黑云(角闪)斜长片麻岩, 含石榴石黑云二长片麻岩夹条纹状斜长角闪岩组合; 夕线石黑云斜长片麻岩, 条纹状黑云斜长片麻岩, 间夹含石榴石黑云母石英片岩.通过对比区域内宝音图群、艾勒格庙组、白乃庙群等古老地块的岩石组合, 发现在原岩建造、变质级别、沉积环境等特征上均有区别, 应将这套表壳岩单独厘定为锡林浩特岩群, 它们组成了锡林郭勒微陆块前寒武变质基底岩系, 其地质特征的研究对锡林郭勒微陆块基底的形成和演化及华北板块与西伯利亚板块的构造关系演化有重要意义.   相似文献   

4.
The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H+ and/or H2O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.  相似文献   

5.
We conducted axial compression and general shear experiments, at T = 900 °C and P = 1.5 GPa, on samples of banded iron formation (BIF) and synthetic aggregates of quartz, hematite and magnetite to investigate how dynamic recrystallization of quartz promotes strain localization, and the role of weak second phases (oxides) on the rheology and microstructural evolution of the aggregates. Experiments showed strain localization into oxide rich layers, and that the oxide content and oxide distribution are key factors for the strength of the aggregate. Only 2–10 wt.% hematite leads to pronounced weakening and increasing hematite content above ∼10% has only a minor additional effect. Where oxide grains are dispersed, the initial strength contrast with quartz induces stress concentrations at their tips, promoting high stress recrystallization-accommodated dislocation creep of quartz. Fine recrystallized quartz reacts with oxide, forming trails of fine reaction product (ferrosilite/fayalite) leading to the interconnection/percolation of a weaker matrix. The strength contrast between the quartz framework and these fine-grained trails promotes strain localization into micro-shear zones, inducing drastic strain weakening. Thus dynamic recrystallization of quartz promotes syn-deformational reactions leading to a microstructurally-controlled evolution of phase strength contrast. It results in a rheologic transition from load-bearing framework to a matrix-controlled rheology, with transition from S–C′ to S–C fabric with increasing strain.  相似文献   

6.
This study analyses the mineralogical and chemical transformations associated with an Alpine shear zone in polymetamorphic metapelites from the Monte Rosa nappe in the upper Val Loranco (N‐Italy). In the shear zone, the pre‐Alpine assemblage plagioclase + biotite + kyanite is replaced by the assemblage garnet + phengite + paragonite at eclogite facies conditions of about 650 °C at 12.5 kbar. Outside the shear zone, only minute progress of the same metamorphic reaction was attained during the Alpine metamorphic overprint and the pre‐Alpine mineral assemblage is largely preserved. Textures of incomplete reaction, such as garnet rims at former grain contacts between pre‐existing plagioclase and biotite, are preserved in the country rocks of the shear zone. Reaction textures and phase relations indicate that the Alpine metamorphic overprint occurred under largely anhydrous conditions in low strain domains. In contrast, the mineralogical changes and phase equilibrium diagrams indicate water saturation within the Alpine shear zones. Shear zone formation occurred at approximately constant volume but was associated with substantial gains in silica and losses in aluminium and potassium. Changes in mineral modes associated with chemical alteration and progressive deformation indicate that plagioclase, biotite and kyanite were not only consumed in the course of the garnet‐and phengite‐producing reactions, but were also dissolved ‘congruently’ during shear zone formation. A large fraction of the silica liberated by plagioclase, biotite and kyanite dissolution was immediately re‐precipitated to form quartz, but the dissolved aluminium‐ and potassium‐bearing species appear to have been stable in solution and were removed via the pore fluid. The reaction causes the localization of deformation by producing fine‐grained white mica, which forms a mechanically weak aggregate.  相似文献   

7.
The Southern Marginal Zone of the late Archean Limpopo Belt of southern Africa is an example of a high‐grade gneiss terrane in which both upper and lower crustal deformational processes can be studied. This marginal zone consists of large thrust sheets of complexly folded low‐strain gneisses, bound by an imbricate system of kilometre‐wide deep crustal shear zones characterized by the presence of high‐strain gneisses (‘primary straight gneisses’). These shear zones developed during the decompression stage of this high‐grade terrane. Low‐ and high‐strain gneisses both contain similar reaction textures that formed under different kinematic conditions during decompression. Evidence for the early M1/D1 metamorphic phase (> 2690 Ma) is rarely preserved in low‐strain gneisses as a uniform orientation of relict Al‐rich orthopyroxene in the matrix and quartz and plagioclase inclusions in the cores of early (M1) Mg‐rich garnet porphyroblasts. This rare fabric formed at > 820 °C and > 7.5 kbar. The retrograde M2/D2 metamorphic fabric (2630–2670 Ma) is well developed in high‐strain gneisses from deep crustal shear zones and is microscopically recognized by the presence of reaction textures that formed synkinematically during shear deformation: M2 sigmoid‐shaped reaction textures with oriented cordierite–orthopyroxene symplectites formed after the early M1 Mg‐rich garnet porphyroblasts, and syn‐decompression M2 pencil‐shaped garnet with oriented inclusions of sillimanite and quartz formed after cordierite under conditions of near‐isobaric cooling at 750–630 °C and 6–5 kbar. The symplectites and pencil‐shaped garnet are oriented parallel to the shear fabric and in the stretching direction. Low‐strain gneisses from thrust sheets show similar M2 decompression cooling and near‐isobaric cooling reaction textures that formed within the same P–T range, but under low‐strain conditions, as shown by their pseudo‐idioblastic shapes that reflect the contours of completely replaced M1 garnet and randomly oriented cordierite–orthopyroxene symplectites. The presence of similar reaction textures reflecting low‐strain conditions in gneisses from thrust sheets and high‐strain conditions in primary straight gneisses suggests that most of the strain during decompression was partitioned into the bounding shear zones. A younger M3/D3 mylonitic fabric (< 2637 Ma) in unhydrated mylonites is characterized by brittle deformation of garnet porphyroclasts and ductile deformation of the quartz–plagioclase–biotite matrix developed at < 600 °C, as the result of post‐decompression shearing under epidote–amphibolite facies conditions.  相似文献   

8.
We report here on a study of three deformed granitoids: two mylonites and an ultramylonite from the inner ductile shear zone of the Ryoke metamorphic belt, SW Japan. Monophase layers composed of quartz, plagioclase or K-feldspar are present in all samples. The plagioclase-rich layers consist of grains 6–10 μm in size, and sometimes include patchy K-feldspar and quartz, indicating solution-precipitation. In the mylonite, the fine-grained plagioclase is mainly An23–25 and, the composition of plagioclase porphyroclast is An21–39 without any significant maximum. The An compositions together with textural observations indicate that fine-grained plagioclase nucleated from solution with mass transfer during deformation. In the ultramylonite, fine-grained plagioclase is widely changed to be An15–37, indicating that the grain-size-reduction process includes fracturing of original plagioclase porphyroclasts in addition to the solution–precipitation process, which results in the composition concentrated around An30. In all samples, the crystallographic orientations of fine-grained plagioclases are almost random and do not correlate with neighbouring porphyroclasts. Grain-size-sensitive creep occurred during rock deformation subsequent to the process of solution–precipitation that involved mass transfer via fluids.  相似文献   

9.
A microstructural and metamorphic study of a naturally deformed medium‐ to high‐pressure granitic orthogneiss (Orlica–?nie?nik dome, Bohemian Massif) provides evidence of behaviour of the felsic crust during progressive burial along a subduction‐type apparent thermal gradient (～10 °C km?1). The granitic orthogneisses develops three distinct microstructural types, as follows: type I – augen orthogneiss, type II – banded orthogneiss and type III – mylonitic orthogneiss, each representing an evolutionary stage of a progressively deformed granite. Type I orthogneiss is composed of partially recrystallized K‐feldspar porphyroclasts surrounded by wide fronts of myrmekite, fully recrystallized quartz aggregates and interconnected monomineralic layers of recrystallized plagioclase. Compositional layering in the type II orthogneiss is defined by plagioclase‐ and K‐feldspar‐rich layers, both of which show an increasing proportion of interstitial minerals, as well as the deformation of recrystallized myrmekite fronts. Type III orthogneiss shows relicts of quartz and K‐feldspar ribbons preserved in a fine‐grained polymineralic matrix. All three types have the same assemblage (quartz + plagioclase + K‐feldspar + muscovite + biotite + garnet + sphene ± ilmenite), but show systematic variations in the composition of muscovite and garnet from types I to III. This is consistent with the equilibration of the three types at different positions along a prograde P?T path ranging from <15 kbar and <700 °C (type I orthogneiss) to 19–20 kbar and >700 °C (types II and III orthogneisses). The deformation types thus do not represent evolutionary stages of a highly partitioned deformation at constant P?T conditions, but reflect progressive formation during the burial of the continental crust. The microstructures of the type I and type II orthogneisses result from the dislocation creep of quartz and K‐feldspar whereas a grain boundary sliding‐dominated diffusion creep regime is the characteristic of the type III orthogneiss. Strain weakening related to the transition from type I to type II microstructures was enhanced by the recrystallization of wide myrmekite fronts, and plagioclase and quartz, and further weakening and strain localization in type III orthogneiss occurred via grain boundary sliding‐enhanced diffusion creep. The potential role of incipient melting in strain localization is discussed.  相似文献   

10.
Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10−5 s−1 in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An60) does not react, anorthite (An92) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.  相似文献   

11.
ABSTRACT The high-grade rocks (metapelite, quartzite, metagabbro) of the Hisøy-Torungen area represent the south-westernmost exposures of granulites in the Proterozoic Bamble sector, south Norway. The area is isoclinally folded and a metamorphic P–T–t path through four successive stages (M1-M4) is recognized. Petrological evidence for a prograde metamorphic event (M1) is obtained from relict staurolite + chlorite + albite, staurolite + hercynite + ilmenite, cordierite + sillimanite, fine-grained felsic material + quartz and hercynite + biotite ± sillimanite within metapelitic garnet. The phase relations are consistent with a pressure of 3.6 ± 0.5 kbar and temperatures up to 750–850°C. M1 is connected to the thermal effect of the gabbroic intrusions prior to the main (M2) Sveconorwegian granulite facies metamorphism. The main M2 granulite facies mineral assemblages (quartz+ plagioclase + K-feldspar + garnet + biotite ± sillimanite) are best preserved in the several-metre-wide Al-rich metapelites, which represent conditions of 5.9–9.1 kbar and 790–884°C. These P–T conditions are consistent with a temperature increase of 80–100°C relative to the adjacent amphibolite facies terranes. No accompanying pressure variations are recorded. Up to 1-mm-wide fine-grained felsic veinlets appear in several units and represent remnants of a former melt formed by the reaction: Bt + Sil + Qtz→Grt + lq. This dehydration reaction, together with the absence of large-scale migmatites in the area, suggests a very reduced water activity in the rocks and XH2O = 0.25 in the C–O–H fluid system was calculated for a metapelitic unit. A low but variable water activity can best explain the presence or absence of fine-grained felsic material representing a former melt in the different granulitic metapelites. The strongly peraluminous composition of the felsic veinlets is due to the reaction: Grt +former melt ± Sil→Crd + Bt ± Qtz + H2O, which has given poorly crystalline cordierite aggregates intergrown with well-crystalline biotite. The cordierite- and biotite-producing reaction constrains a steep first-stage retrograde (relative to M2) uplift path. Decimetre- to metre-wide, strongly banded metapelites (quartz + plagioclase + biotite + garnet ± sillimanite) inter-layered with quartzites are retrograded to (M3) amphibolite facies assemblages. A P–T estimate of 1.7–5.6 kbar, 516–581°C is obtained from geothermobarometry based on rim-rim analyses of garnet–biotite–plagioclase–sillimanite–quartz assemblages, and can be related to the isoclinal folding of the rocks. M4 greenschist facies conditions are most extensively developed in millimetre-wide chlorite-rich, calcite-bearing veins cutting the foliation.  相似文献   

12.
A ductile shear zone within a metasomatic biotite band in the Ryoke granite, Teshima, SW Japan, has been studied using the scanning X-ray analytical microscope (SXAM). This enabled the quantitative distributions of major elements, such as Si, K, Fe, Al and Ca, to be determined within the shear zone. These element maps were processed to transform them into images showing the distribution of minerals such as quartz, biotite, plagioclase and K-feldspar, which form the major minerals within the biotite band and the granite protolith. Mineral profiles based on these mineral maps compared with the simple shear strain profile reveal that the shear zone is most intense where quartz and biotite have been substituted for the primary mineral assemblage of the granite protolith, suggesting that the stresses imposed on the granite caused the shear strain to localize along the biotite band to produce the observed shear zone. It appears that the rheological behavior changed around 50–60% of quartz modal composition.  相似文献   

13.
Feldspar grain-size reduction occurred due to the fracturing of plagioclase and K-feldspar, myrmekite formation and neocrystallization of albitic plagioclase along shear fractures of K-feldspar porphyroclasts in the leucocratic granitic rocks from the Yecheon shear zone of South Korea that was deformed under a middle greenschist-facies condition. The neocrystallization of albitic plagioclase was induced by strain energy adjacent to the shear fractures and by chemical free energy due to the compositional disequilibrium between infiltrating Na-rich fluid and host K-feldspar. With increasing deformation from protomylonite to mylonite, alternating layers of feldspar, quartz and muscovite developed. The fine-grained feldspar-rich layers were deformed dominantly by granular flow, while quartz ribbons were deformed by dislocation creep. With layer development and a more distributed strain in the mylonite, lower stresses in the quartz-rich layers resulted in a larger size of dynamically recrystallized quartz grains than that of the protomylonite.  相似文献   

14.
Biotite + plagioclase + quartz (BPQ) is a common assemblagein gneisses, metasediments and metamorphosed granitic to granodioriticintrusions. Melting experiments on an assemblage consistingof 24 vol. % quartz, 25 vol. % biotite (XMg = 0·38–0·40),42 vol. % plagioclase (An26–29), 9 vol. % alkali feldsparand minor apatite, titanite and epidote were conducted at 10,15 and 20 kbar between 800 and 900°C under fluid-absentconditions and with small amounts (2 and 4 wt %) of water addedto the system. At 10 kbar when 4 wt % of water was added tothe system the biotite melting reaction occurred below 800°Cand produced garnet + amphibole + melt. At 15 kbar the meltingreaction produced garnet + amphibole + melt with 2 wt % addedwater. At 20 kbar the amphibole occurred only at high temperature(900°C) and with 4 wt % added water. In this last case themelting reaction produced amphibole + clinopyroxene ±garnet + melt. Under fluid-absent conditions the melting reactionproduced garnet + plagioclase II + melt and left behind a plagioclaseI ± quartz residuum, with an increase in the modal amountof garnet with increasing pressure. The results show that itis not possible to generate hornblende in such compositionswithout the addition of at least 2–4 wt % H2O. This reflectsthe fact that conditions of low aH2O may prevent hornblendefrom being produced with peraluminous granitic liquids fromthe melting of biotite gneiss. Thus growth of hornblende inanatectic BPQ gneisses is an indication of addition of externalH2O-rich fluids during the partial melting event. KEY WORDS: biotite; dehydration; gneisses; hornblende; melt  相似文献   

15.
The Mary granite, in the East Athabasca mylonite triangle, northern Saskatchewan, provides an example and a model for the development of non-migmatitic gneissic texture. Gneissic compositional layering developed through the simultaneous evolution of three microdomains corresponding to original plagioclase, orthopyroxene and matrix in the igneous rocks. Plagioclase phenocrysts were progressively deformed and recrystallized, first into core and mantle structures, and ultimately into plagioclase-rich layers or ribbons. Garnet preferentially developed in the outer portions of recrystallized mantles, and, with further deformation, produced garnet-rich sub-layers within the plagioclase-rich gneissic domains. Orthopyroxene was replaced by clinopyroxene and garnet (and hornblende if sufficient water was present), which were, in turn, drawn into layers with new garnet growth along the boundaries. The igneous matrix evolved through a number of transient fabric stages involving S-C fabrics, S-C-C' fabrics, and ultramylonitic domains. In addition, quartz veins were emplaced and subsequently deformed into quartz-rich gneissic layers. Moderate to highly strained samples display extreme mineralogical (compositional) segregation, yet most domains can be directly related to the original igneous precursors. The Mary granite was emplaced at approximately 900 °C and 1.0 GPa and was metamorphosed at approximately 750 °C and 1.0 GPa. The igneous rocks crystallized in the medium-pressure granulite field (Opx–Pl) but were metamorphosed on cooling into the high-pressure (Grt–Cpx–Pl) granulite field. The compositional segregation resulted from a dynamic, mutually reinforcing interaction between deformation, metamorphic and igneous processes in the deep crust. The production of gneissic texture by processes such as these may be the inevitable result of isobaric cooling of igneous rocks within a tectonically active deep crust.  相似文献   

16.
The metamorphic evolution of a granulitized eclogite from the Phung Chu Valley (Eastern Himalaya) was reconstructed combining microstructural observations, conventional thermobarometry and quantitative pseudosection analysis. The granulitized eclogite consists of clinopyroxene, plagioclase, garnet, brown amphibole, and minor orthopyroxene, biotite, ilmenite and quartz. On the basis of microstructural observations and mineral relationships, four metamorphic stages and related mineral assemblages have been recognized: (i) M1 eclogite‐facies assemblage, consisting of garnet, omphacite (now replaced by a clinopyroxene + plagioclase symplectite) and phengite (replaced by biotite +plagioclase symplectite); (ii) M2 granulite‐facies assemblage, represented by clinopyroxene, orthopyroxene, garnet, plagioclase and accessory ilmenite; (iii) M3 plagioclase + orthopyroxene corona developed around garnet, and (iv) M4 brown amphibole + plagioclase assemblage in the rock matrix. Because of the nearly complete lack of eclogitic mineral relics, M1 conditions can be only loosely constrained at >1.5 GPa and >580 °C. In contrast, assemblage M2 tightly constrains the peak granulitic stage at 0.8–1.0 GPa and >750 °C. The second granulitic assemblage M3, represented by the plagioclase + orthopyroxene corona, formed at lower pressures (～0.4 GPa and ～750 °C). During the subsequent exhumation, the granulitized eclogite experienced significant cooling to nearly 700 °C, marked by the appearance of brown amphibole and plagioclase (M4) in the rock matrix. U‐Pb SHRIMP analyses on low‐U rims of zircon from an eclogite of the same locality suggest an age of 13–14 Ma for the M3 stage. The resulting decompressional clockwise P–T path of the Ama Drime eclogite is characterized by nearly isothermal decompression from >1.5 GPa to ～0.4 GPa, followed by nearly isobaric cooling from ～775 °C to ～710 °C. Modelling of phase equilibria by a calculated petrogenetic grid and conventional thermobarometry on a biotite‐garnet‐sillimanite metapelite hosted in the country rock granitic orthogneiss extends the inferred P–T trajectory down to ～630 °C and ～0.3 GPa.  相似文献   

17.
Microlites (minute spherulitic, dendritic, skeletal, acicular and poikilitic crystals) diagnostic of crystallization in quenched melt or glass in fault rocks have been used to infer fossil earthquakes. High‐P microlites and crystallites are described here in a variably eclogitized gabbro, the wallrock to the coesite‐bearing eclogite breccia at Yangkou in the Chinese Su‐Lu high‐P metamorphic belt. The studied hand specimens are free of discernible shear deformation, although microfractures are not uncommon under the microscope. In the least eclogitized gabbro, the metagabbro, stellate growths of high‐P minerals on the relict igneous minerals are common. Dendritic garnet crystals (<1?5 μm) grew around rutile and/or phengite replacing ilmenite and biotite, respectively. Skeletal garnet also rims broken flakes of igneous biotite and mechanically twinned augite. Radial intergrowths of omphacite and quartz developed around relict igneous orthopyroxene and are rimmed by skeletal or poikilitic garnet where a Ti‐bearing mineral relict is present. Acicular epidote, kyanite and phengite crystallites are randomly distributed in a matrix of Na‐rich plagioclase, forming the pseudomorphs after igneous plagioclase. In the more eclogitized gabbro, the coronitic eclogite located closer to the eclogite breccia, all the igneous minerals broke down into high‐P assemblages. Thick coronas of poikilitic garnet grew between the pseudomorphs after igneous plagioclase and ferromagnesian minerals. The igneous plagioclase is replaced by omphacite crystallites, with minor amounts of phengite and kyanite. Thermodynamic modelling of the plagioclase pseudomorphs shows an increase in P–T in the wallrock from the metagabbro to the coronitic eclogite, and the P–T variation is unrelated to H2O content. The fluid‐poor pressure overstepping scenario is unsupported both by phase diagram modelling and by whole‐rock chemical data, which show that the various types of eclogitized gabbro are all fairly dry. A large pressure difference of >2 GPa between the metagabbro and the coesite‐bearing eclogites ~20 m apart cannot be explained by the subduction hypothesis because this would require a depth difference of >60 km. The microlites and crystallites are evidence for dynamic crystallization due to rapid cooling because constitutional supercooling was unlikely for the plagioclase pseudomorphs. The lack of annealing of the broken biotite and augite overgrown by strain free skeletal garnet is consistent with a transient high‐P–T event at a low ambient temperature (<300 °C), probably in the crust. Therefore, the eclogitization of the wallrock to the eclogite breccia was also coseismic, as proposed earlier for the eclogite facies fault rocks. The outcrop‐scale P–T variation and the transient nature of the high‐P–T event are inconsistent with the other existing tectonic models for high‐P metamorphism. The fact that the less refractory but denser biotite is largely preserved while the more refractory but less dense plagioclase broke down completely into high‐P microlite assemblages in the metagabbro indicates a significant rise in pressure rather than temperature. Given that the metamorphic temperatures are far below the melting temperatures of most of the gabbroic minerals under fluid‐absent conditions, stress‐induced amorphization appears to be the more likely mechanism of the coseismic high‐P metamorphism.  相似文献   

18.
In the Sesia Zone, Western Alps, a large volume of orthogneissformed as a result of eclogite fades metamorphism and deformationof quartz diorite during early Alpine underthrusting and subduction.Rare lenses of undeformed metaquartz diorite, preserved withinthe orthogneiss, represent an early stage in the evolution ofthis latter rock type. The metamorphic and microstructural evolutionof the orthogneiss in the eclogite fades has been reconstructedfrom studies of gradational contacts between undeformed andstrongly deformed rocks. High pressure transformations of the original igneous plagioclase+ biotite + quartz assemblage to jadeitic pyroxene (Jd0.95 –0.85+ zoisite + quartz + garnet + 2 muscovites developed prior todeformation. Slow intergranular diffusion resulted in a stateof disequilibrium between small textural domains in the metaquartzdiorite. The compositions of the phases of the undeformed metaquartzdiorite do not reflect the bulk rock composition, but were controlledby their position relative to reactant phases. The jadeiticpyroxenes, for example, formed in localized domains which originallyconsisted of sodic plagioclase whereas omphacite was the equilibriumpyroxene for the bulk rock composition. Mineralogical changes which occurred during subsequent deformationof the metaquartz diorite are interpreted as resulting froma progressive enlargement of equilibrium domains and the partialequilibration of mineral compositions to the bulk rock compositionrather than from changes in pressure and temperature. Initiallyduring high-strain deformation, fine-grained aggregates of jadeiticpyroxene + quartz + zoisite (originally pseudomorphing plagioclase)are inferred to have deformed by a mechanism of grain boundarysliding accommodated by diffusive mass transfer. Muscovite andgarnet compositions homogenized during the deformation but dueto slow intracrystalline diffusion, pyroxene compositions (Jd0.95–0.80) remained metastable. The coarsening of pyroxeneeventually terminated deformation by grain boundary slidingand this mineral subsequently deformed by intracrystalline plastidty.This latter process was accompanied by and perhaps catalyseda change in pyroxene composition from metastable jadeite towardsomphacite by a reaction involving the resorption of garnet andthe nucleation and growth of paragonite. The resulting orthogneissconsists of quartz + omphadte + garnet + phengite + paragonite+ zoisite. The rock is characterized by a broad range of pyroxenecompositions (Jd0.8 –0.5) due to the incomplete equilibrationof this mineral to the bulk rock composition and a lack of Fe-Mgexchange equilibrium between pyroxene and garnet. However, incontrast to the undeformed metaquartz diorite, there are noobvious textural indications of disequilibrium between phasesin the orthogneiss  相似文献   

19.
Foliated garnet-bearing amphibolites occur within the West Bore Shear Zone, cutting through granulite facies gneisses of the Strangways Metamorphic Complex. In the amphibolites, large euhedral garnet (up to 3 cm) occurs within fine-grained recrystallized leucocratic diffusion haloes of plagioclase–quartz. The garnet and their haloes include a well-developed vertical foliation, also present in the matrix. This foliation is the same as that cutting through the unconformably overlying Neoproterozoic Heavitree Quartzite. The textures indicate syn- to late kinematic growth of the amphibolite facies mineral assemblages.
All mineral assemblages record an arrested prograde reaction history. Noteworthy is the growth of garnet at the expense of hornblende and plagioclase, and the breakdown of staurolite–hornblende to give plagioclase–gedrite. These dehydration reactions indicate increasing P – T  conditions during metamorphism, and suggest heating towards the end of a period of intense deformation. Temperature estimates for the garnet–amphibolite and related staurolite–hornblende assemblages from the shear zone are about 600 °C. Pressure is estimated at about 5 kbar.
An Sm–Nd isochron gives an age of 381±7 Ma for the peak metamorphism and associated deformation. This age determination confirms that amphibolite facies conditions prevailed during shear zone development within the Strangways Metamorphic Complex during the Alice Springs Orogeny. These temperature conditions are significantly higher than those expected at this depth assuming a normal geothermal gradient. The Alice Springs Orogeny was associated with significant crustal thickening, allowing exhumation of the granulite facies, Palaeoproterozoic, lower crust. Along-strike variations of the tectonic style suggest a larger amount of crustal shortening in the eastern part of the Alice Springs Orogeny.  相似文献   

20.
Garnet (10 vol.%; pyrope contents 34–44 mol.%) hosted in quartzofeldspathic rocks within a large vertical shear zone of south Madagascar shows a strong grain‐size reduction (from a few cm to ～300 μm). Electron back‐scattered diffraction, transmission electron microscopy and scanning electron microscope imaging coupled with quantitative analysis of digitized images (PolyLX software) have been used in order to understand the deformation mechanisms associated with this grain‐size evolution. The garnet grain‐size reduction trend has been summarized in a typological evolution (from Type I to Type IV). Type I, the original porphyroblasts, form cm‐sized elongated grains that crystallized upon multiple nucleation and coalescence following biotite breakdown: biotite + sillimanite + quartz = garnet + alkali feldspar + rutile + melt. These large garnet grains contain quartz ribbons and sillimanite inclusions. Type I garnet is sheared along preferential planes (sillimanite layers, quartz ribbons and/or suitably oriented garnet crystallographic planes) producing highly elongated Type II garnet grains marked by a single crystallographic orientation. Further deformation leads to the development of a crystallographic misorientation, subgrains and new grains resulting in Type III garnet. Associated grain‐size reduction occurs via subgrain rotation recrystallization accompanied by fast diffusion‐assisted dislocation glide. This plastic deformation of garnet is associated with efficient recovery as shown by the very low dislocation densities (1010 m?3 or lower). The rounded Type III garnet experiences rigid body rotation in fine‐grained matrix. In the highly deformed samples, the deformation mechanisms in garnet are grain‐size‐ and shape‐dependent: dislocation creep is dominant for the few large grains left (>1 mm; Type II garnet), rigid body rotation is typical for the smaller rounded grains (300 μm or less; Type III garnet) whereas diffusion creep may affect more elliptic garnet (Type IV garnet). The P–T conditions of garnet plasticity in the continental crust (≥950 °C; 11 kbar) have been identified using two‐feldspar thermometry and GASP conventional barometry. The garnet microstructural and deformation mechanisms evolution, coupled with grain‐size decrease in a fine‐grained steady‐state microstructure of quartz, alkali feldspar and plagioclase, suggests a separate mechanical evolution of garnet with respect to felsic minerals within the shear zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号