首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
The microstructures of two contrasting garnet grains are mapped using automated electron backscatter diffraction. In both cases there is a very strong crystallographic preferred orientation, with measurements clustered round a single dominant orientation. Each garnet grain is divided into domains with similar orientations, limited by boundaries with misorientations of 2° or more. In both samples most of misorientation angles measured across orientation domain boundaries are significantly lower than those measured between random pairs of orientation domains. One sample is a deformed garnet that shows considerable distortion within the domains. Lines of orientation measurements within domains and across domain boundaries show small circle dispersions around rational crystallographic axes. The domain boundaries are likely to be subgrain boundaries formed by dislocation creep and recovery. The second sample is a porphyroblast in which the domains have no internal distortion and the orientation domain boundaries have random misorientation axes. These boundaries probably formed by coalescence of originally separate garnets. We suggest that misorientations across these boundaries were reduced by physical relative rotations driven by boundary energy. The data illustrate the potential of orientation maps and misorientation analysis in microstructural studies of any crystalline material.  相似文献   

2.
Elongate and deformed garnets from Glenelg, NW Scotland, occurwithin a thin shear zone transecting an eclogite body that hasundergone partial retrogression to amphibolite facies at circa700°C. Optical microscopy, back-scattered electron imaging,electron probe microanalysis and electron back-scatter diffractionreveal garnet sub-structures that are developed as a functionof strain. Subgrains with low-angle misorientation boundariesoccur at low strain and garnet orientations are dispersed, aroundrational crystallographic axes, across these boundaries. Towardshigh-strain areas, boundary misorientations increase and thereis a loss of crystallographic control on misorientations, whichtend towards random. In high-strain areas, a polygonal garnetmicrostructure is developed. The garnet orientations are randomlydispersed around the original single-crystal orientation. Somegarnet grains are elongate and Ca-rich garnet occurs on thefaces of elongate grains oriented normal to the foliation. Commonly,the garnet grains are admixed with matrix minerals, and, wherein contact with other phases, garnet is well faceted. We suggestthat individual garnet porphyroclasts record an evolution fromlow-strain conditions, where dislocation creep and recoveryaccommodated deformation, through increasing strain, where dynamicrecrystallization occurred by subgrain rotation, to higheststrains, where recrystallized grains were able to deform bydiffusion creep assisted grain boundary sliding with associatedrotations. KEY WORDS: diffusion creep; EBSD; garnet; plastic deformation; recrystallization  相似文献   

3.
In this study, the chemistry and microstructure of garnet aggregates within a metamorphic vein are investigated. Garnet‐bearing veins in the Sanbagawa metamorphic belt, Japan, occur subparallel to the foliation of a host mafic schist, but some cut the foliation at low angle. Backscattered electron image and compositional mapping using EPMA and crystallographic orientation maps from electron‐backscattered diffraction (EBSD) reveal that numerous small garnet (10–100 μm diameter) coalesce to form large porphyroblasts within the vein. Individual small garnet commonly exhibits xenomorphic shape at garnet/garnet grain boundaries, whereas it is idiomorphic at garnet/quartz boundaries. EBSD microstructural analysis of the garnet porphyroblasts reveals that misorientation angles of neighbour‐pair garnet grains within the vein have a random distribution. This contrasts with previous studies that found coalescence of garnet in mica schist leads to an increased frequency of low angle misorientation boundaries by misorientation‐driven rotation. As garnet nucleated with random orientation, the difference in misorientation between the two studies is due to the difference in the extent of grain rotation. A simple kinetic model that assumes grain rotation of garnet is rate‐limited by grain boundary diffusion creep of matrix quartz, shows that (i) the substantial rotation of a fine garnet grain could occur for the conditions of the Sanbagawa metamorphism, but (ii) the rotation rate drastically decreased as garnet grains formed large clusters during growth. Therefore, the random misorientation distribution of garnet porphyroblasts in the Sanbagawa vein is interpreted as follows: (i) garnet within the vein grew so fast that substantial grain rotation did not occur through porphyroblast formation, and thus (ii) random orientations at the nucleation stage were preserved. The extent of misorientation‐driven rotation indicated by deviation from random orientation distribution may be useful to constrain the growth rate of constituent grains of porphyroblast that formed by multiple nucleation and coalescence.  相似文献   

4.
Crystallographic orientation data from pure albite domains in a low-grade sheared metagabbro from the Combin Zone of the western Italian Alps were measured by electron backscatter diffraction. Crystallographic preferred orientations (CPOs) in four high-strain domains are non-random and have a triclinic symmetry. The clusters of [100], [010] and [001] show an angular relationship that corresponds to that of the albite crystal lattice. However, the orientations of axis clusters to the kinematic axes vary from domain to domain. CPOs from a low-strain domain also show clustered axes with triclinic symmetry, but with more intense clustering than those in the high-strain domains. Grain misorientation distributions are presented both for the low-strain domain and one of the high-strain domains. In the high-strain domain, the distribution of misorientation angles between neighbouring grains displays a peak at about 70°. The equivalent distribution in the low-strain domain has a peak at 30°. For both domains, the misorientation axis distributions, between neighbouring and non-neighbouring grains, are random, except for some of axes with 160–180° misorientation that exhibit a slight concentration around [010]. The diversity of CPOs among the domains suggests that these CPOs could not be produced by dislocation creep. They are likely to have been inherited from plagioclase parents, as a result of host control on the nucleation of the new albite grains. These CPOs do not contain any direct information about the deformation kinematics. We interpret that deformation of these domains occurred by granular flow. Crystallographic axis dispersion due to grain boundary sliding (GBS) caused weakening of CPOs, modification of misorientation angle distributions and randomisation of misorientation axis distributions. The fact that a CPO can survive GBS even after a high strain indicates that CPO is not always a sensitive indicator of deformation mechanisms. Misorientation distribution may provide a complementary, and possibly a more sensitive indicator of deformation mechanisms.  相似文献   

5.
The crystallography and geometry of high-angle grain boundaries from dynamically recrystallized quartz have been studied. On the basis of combined electron backscatter diffraction and universal stage measurements, the complete crystallographic orientation of the grain boundaries could be calculated. The u-stage rotation of the grain boundaries to a vertical position reveals that they are never curved but always consist of straight segments. Our results show that these segments preferentially occupy rhombohedral, trapezohedral and bipyramidal orientations, i.e., orientations in a  25–50° girdle to the c-axis. A specific, albeit low, number of segments with special crystallographic orientation, with respect to a neighbouring quartz grain, often shows another special orientation with respect to the other neighbouring grain. Preferred combinations of grain boundary orientations related to both neighbouring grains are (i) low-index rhombohedral and high index trapezohedral, (ii) low-index bipyramidal and low-index trapezohedral or high-index rhombohedral, and (iii) low-index trapezohedral and low or high index trapezohedral. In certain cases, such as at triple junctions, the boundaries occupy specific trapezohedral orientations with a constant angle to the c-axis. This argues for energy isotropy of trapezohedral planes with the same angle to the quartz c-axis. In general, good match coincidence site lattice (CSL) orientations are not preferentially occupied so that most of the studied grain boundaries represent general boundaries. The formation of straight segments in special crystallographic orientations indicates the crystallographic control and implies an energy reduction of certain general boundaries.  相似文献   

6.
Intragranular microshear zones within a greenschist facies calcite marble were studied to try to constrain better the processes of dynamic recrystallization as well as the deformation processes that occur within newly recrystallized grains. Intragranular recrystallized grains within large, twinned calcite porphyroclasts can be related to the host from which they have recrystallized and are the focus of an electron backscatter diffraction study. Lattice distortions, low angle boundaries and some high angle boundaries (>15°) in the microshears within a porphyroclast have the same misorientation axes suggesting that deformation occurred by climb-accommodated dislocation creep involving subgrain rotation recrystallization. Changes in the ratio of host and twin domain, as the deformation zone is entered, show that twin boundary migration also occurred. Recrystallized grains have similar sizes (10–60 μm) to subgrains, suggesting that they formed by subgrain rotation. However, within the intragranular microshear zones the misorientations between recrystallized grains and porphyroclasts are considerably larger than 15° and misorientation axes are randomly oriented. Moreover recrystallized grain orientations average around the porphyroclast orientation. We suggest that the recrystallized grains, once formed, are able to deform partly by diffusion accommodated grain boundary sliding, which is consistent with predictions made from lab flow laws.  相似文献   

7.
The petrological significance of misorientations between grains   总被引：4，自引：1，他引：4  
Misorientation analysis quantifies microstructural features in tectonites, metamorphic and igneous rocks, and allows hypotheses on their formation to be tested. The misorientation between two lattices can be expressed by a rotation axis and rotation angle. For lattices with symmetry, it is conventional to take the minimum angle that enables one lattice to be rotated into the other. For a group of lattice measurements two types of misorientation distribution can be calculated. Selecting random pairs of grains gives the random-pair misorientation distribution. Selecting neighbouring pairs gives the neighbour-pair misorientation distribution. The forms of both distributions are visualised using histograms or cumulative frequency diagrams. They are strongly influenced by any overall crystallographic preferred orientation and by intrinsic crystal symmetry. In many rocks, the random-pair misorientation distribution and neighbour-pair misorientation distribution are statistically significantly different (quantified using the Kolmogorov-Smirnov test). Differences between the random-pair misorientation distribution and neighbour-pair misorientation distribution imply that adjacent grains have physically interacted or are inherited from a precursor microstructure. Interactions include (1) reduction in surface energy by lattice alignment. We show this may have occurred in garnet clusters in schist, and olivine in a cumulate. It is well-known in metals and may be a common geological process. (2) Nucleation, where those nuclei have influenced the orientation of adjacent nuclei. (3) Mechanical rotations of facetted grains in compacting crystal mushes, so that faces become parallel. (4) Growth twinning. Inheritance includes (1) subgrain rotation recrystallisation in tectonites deforming by crystal plastic processes. (2) Mechanical and transformation-related twinning. (3) Domainal microstructures, e.g. where grains have formed from a few large original grains, may give rise to spurious correlations when the orientation data cover more than one domain. With this proviso, misorientation analysis can be used to investigate many important microstructural processes.  相似文献   

8.
Many physical properties of rocks are sensitive to grain size and hence to the structure of grain boundaries. Depending on their properties, such as deformation and transport behaviour, boundaries may be divided into two broad types, namely special and general grain boundaries. Electron backscattered diffraction (EBSD) is used to investigate the misorientation distributions of grain boundaries and, more recently, to determine the population of grain boundary planes. Studies on metals and ceramics suggest that the grain boundary plane, rather than the misorientation, is the key parameter when defining special and general grain boundaries. In this study, the distribution of grain boundary plane orientations has been successfully determined using EBSD for a slightly deformed, synthetic NaCl material containing 22 ppm water. Boundaries showed a preference for {100} planes, which occurred with twice the frequency of a random distribution. The grain boundary plane distributions found in NaCl were largely in agreement with studies on MgO. Grain boundaries, with a coincident site lattice (CSL) misorientation, also showed a preference for {100} planes, rather than the planes of high coincident density associated with the CSL. Three main types of boundary were identified, namely {100} twist boundaries, boundaries with {100}{hkl} planes and general {hkl}{hkl} boundaries. As the properties of these three types of boundary differ, then the transport and creep properties in wet NaCl will depend on the fraction of the different boundary types found in the grain boundary population.  相似文献   

9.
We use quantitative microstructural analysis including misorientation analysis based on electron backscatter diffraction (EBSD) data to investigate deformation mechanisms of naturally deformed plagioclase in an amphibolite gabbro mylonite. The sample is from lower oceanic crust exposed near the Southwest Indian Ridge, and it has a high ratio of recrystallized matrix grains to porphyroclasts. Microstructures preserved in porphyroclasts suggest that early deformation was achieved principally by dislocation creep with subgrain rotation recrystallization; recrystallized grain (average diameter ∼8 μm) microstructures indicate that subsequent grain boundary sliding (GBS) was active in the continued deformation of the recrystallized matrix. The recrystallized matrix shows four-grain junctions, randomized misorientation axes, and a shift towards higher angles for neighbor-pair misorientations, all indicative of GBS. The matrix grains also exhibit a shape preferred orientation, a weak lattice preferred orientation consistent with slip on multiple slip systems, and intragrain microstructures indicative of dislocation movement. The combination of these microstructures suggest deformation by dislocation-accommodated GBS (DisGBS). Strain localization within the recrystallized matrix was promoted by a transition from grain size insensitive dislocation creep to grain size sensitive GBS, and sustained by the maintenance of a small grain size during superplasticity.  相似文献   

10.
This work presents the results of theoretical modeling of regular misorientations of olivine grains in mimetic paramorphs from ringwoodite and wadsleyite, whose formation is expected during the rise of material from the mantle transition zone. The coordinates of the axes and angles of misorientation, which characterize ten operations of alignment in the pair intergrowths of olivine grains, eight of which are twins, are calculated. Possible conditions for the formation of the predicted mimetic paramorphs and the chances of their preservation are discussed. The calculated orientations are compared with the known olivine twin laws.  相似文献   

11.
In this study several grain-scale microstructures are presented that are thought to demonstrate the migration direction of once-mobile grain boundaries in a naturally deformed quartzite. An analysis is presented of the sense of migration of the boundaries, and the characteristics of the patterns of relative grain growth and shrinkage. Grain-boundary migration seems to be correlated with the relative crystallographic orientations of neighbouring grains for the quartz—quartz grain boundaries, and the pattern of preferred grain growth is roughly symmetrical about the mica foliation plane.  相似文献   

12.
Grain boundary processes contribute significantly to electronic and ionic transports in materials within Earth’s interior. We report a novel experimental study of grain boundary conductivity in highly strained olivine aggregates that demonstrates the importance of misorientation angle between adjacent grains on aggregate transport properties. We performed electrical conductivity measurements of melt-free polycrystalline olivine (Fo90) samples that had been previously deformed at 1200 °C and 0.3 GPa to shear strains up to γ?=?7.3. The electrical conductivity and anisotropy were measured at 2.8 GPa over the temperature range 700–1400 °C. We observed that (1) the electrical conductivity of samples with a small grain size (3–6 µm) and strong crystallographic preferred orientation produced by dynamic recrystallization during large-strain shear deformation is a factor of 10 or more larger than that measured on coarse-grained samples, (2) the sample deformed to the highest strain is the most conductive even though it does not have the smallest grain size, and (3) conductivity is up to a factor of ~?4 larger in the direction of shear than normal to the shear plane. Based on these results combined with electrical conductivity data for coarse-grained, polycrystalline olivine and for single crystals, we propose that the electrical conductivity of our fine-grained samples is dominated by grain boundary paths. In addition, the electrical anisotropy results from preferential alignment of higher-conductivity grain boundaries associated with the development of a strong crystallographic preferred orientation of the grains.  相似文献   

13.
The microstructural development of synthetic rocksalt experimentally deformed at 100–200°C can be dominated either by grain boundary migration recrystallisation or by subgrain rotation recrystallisation, depending on water content. Samples taken from both regimes have been analysed using automated electron backscatter diffraction in order to collect crystallographic orientation and misorientation data. The frequency distribution of boundary misorientations, the boundary hierarchy characteristics and the nature of any crystallographic preferred orientation (CPO) have been used to determine the crystallographic signature of both recrystallisation processes. Dominant subgrain rotation recrystallisation results in many low to medium angle (4–20°) boundaries, a strong CPO and a continuous boundary hierarchy. Dominant grain boundary migration recrystallisation results in few low or medium angle boundaries, and a discrete boundary hierarchy. The causes of these differences and the potential application of crystallographic signatures to the study of naturally deformed rocks are discussed.  相似文献   

14.
Two types of garnet porphyroblast occur in the Schneeberg Complex of the Italian Alps. Type 1 porphyroblasts form ellipsoidal pods with a centre consisting of unstrained quartz, decussate mica and small garnet grains, and a margin containing large garnet grains. Orientation contrast imaging using the scanning electron microscope shows that the larger marginal garnet grains comprise a number of orientation subdomains. Individual garnet grains without subdomains are small (< 50 µm), faceted and idioblastic, and have simple zoning profiles with Ca‐rich cores and Ca‐poor rims. Subdomains of larger garnet grains are similar in size to the individual, small garnet grains. Type 2 porphyroblasts comprise only ellipsoidal garnet, with small subdomains in the centre and larger subdomains at the margin. Each subdomain has its own Ca high, Ca dropping towards subdomain boundaries. Garnet grains, with or without subdomains, all have the same Ca‐poor composition at rims in contact with other minerals. The compositional zonation patterns are best explained by simultaneous, multiple nucleation, followed by growth and amalgamation of individual garnet grains. The range of individual garnet and garnet subdomain sizes can be explained by a faster growth rate at the porphyroblast margin than in the centre. The difference between Type 1 and Type 2 porphyroblasts is probably related to the growth rate differential across the porphyroblast. Electron backscatter diffraction shows that small, individual garnet grains are randomly oriented. Large marginal garnet grains and subdomain‐bearing garnet grains have a strong preferred orientation, clustering around a single garnet orientation. Misorientations across subdomain boundaries are small and misorientation axes are randomly oriented with respect to crystallographic orientations. The only explanation that fits the observational data is that individual garnet grains rotated towards coincident orientations once they came into contact with each other. This process was driven by the reduction of subdomain boundary energy associated with misorientation loss. Rotation of garnet grains was accommodated by diffusion in the subdomain boundary and diffusional creep and rigid body rotation of other minerals (quartz and mica) around the garnet. An analytical model, in which the kinetics of garnet rotation are controlled by the rheology of surrounding quartz, suggests that, at the conditions of metamorphism, the rotation required to give a strong preferred orientation can occur on a similar time‐scale to that of porphyroblast growth.  相似文献   

15.
The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10−6/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.  相似文献   

16.
Abstract: Advanced techniques are examined to observe microstructure of rocks using image analysis combined with methods such as the fluorescent approach and the application of optical characteristics of minerals. Analyzed are discrimination of grains in rocks, distribution patterns of grain orientation in sandstone, changes of grain shape as weathering advances and distribution patterns of microcracks in granite. In Shirahama sandstone, relatively large and flat grains are orientated parallel to the bedding on the plane perpendicular to the bedding, while grains on the plane parallel to the bedding show random patterns. In weathered granite, it is clarified that the grain surface becomes complex as weathering advances and differences among three major mineral species are identified. In Inada granite, intracrystalline cracks predominate over intercrystalline cracks and grain boundary cracks both in total length and number. Furthermore, three types of microcracks show different orientations; the intercrystalline cracks show a dominant orientation which coincides with the orientation of the rift plane, the easiest plane to split, while the intracrystalline cracks and grain boundary cracks show no preferred orientation.  相似文献   

17.
The development of subgrain boundary misorientations with strain in dry, synthetic NaCl polycrystals, deformed at elevated temperature, has been investigated using electron backscattered diffraction (EBSD). At low natural strains, up to 0.5, average misorientations of subgrain boundaries increase with strain and a power law relationship exists between strain and average misorientations. The average misorientations are strongly influenced by grain orientation, suggesting that the misorientation–strain relationship may also be texture dependent in materials with high plastic anisotropy, like NaCl. A slight grain size dependency of the average misorientations was observed. The results indicate that with suitable calibration, average subgrain boundary misorientations may offer a method for estimating the strain accommodated by dislocation creep in NaCl and thus perhaps in other geological materials, although current theories for polycrystalline plasticity imply that misorientations may also depend on stress in some situations.  相似文献   

18.
Detailed electron microscope and microstructural analysis of two ultrahigh temperature felsic granulites from Tonagh Island, Napier Complex, Antarctica show deformation microstructures produced at  1000 °C at 8–10 kbar. High temperature orthopyroxene (Al 7 wt.% and  11 wt.%), exhibits crystallographic preferred orientation (CPO) and frequent subgrain boundaries which point to dislocation creep as the dominating deformation mechanism within opx. Two different main slip systems are observed: in opx bands with exclusively opx grains containing subgrain boundaries with traces parallel to [010] and a strong coupling of low angle misorientations (2.5°–5°) with rotation axes parallel to [010] the dominating slip system is (100)[001]. Isolated opx grains and grain clusters of 2–5 grains embedded in a qtz–fsp matrix show an additional slip system of (010)[001]. The latter slip system is harder to activate. We suggest that differences in the activation of these slip systems is a result of higher differential stresses imposed onto the isolated opx grains and grain clusters. In contrast to opx, large qtz grains (up to 200 μm) show random crystallographic orientation. This together with their elongate and cuspate shape and the lack of systematic in the rotation axes associated with the subgrain boundaries is consistent with diffusion creep as the primary deformation mechanism in quartz.Our first time detailed microstructural observations of ultrahigh temperature and medium to high pressure granulites and their interpretation in terms of active deformation mechanisms give some insight into the type of rheology that can be expect at lower crustal conditions. If qtz is the mineral phase governing the rock rheology, Newtonian flow behaviour is expected and only low differential stress can be supported. However, if the stress supporting mineral phase is opx, the flow law resulting from dislocation creep will govern the rheology of the rock unit; hence, an exponential relationship between stress and strain rate is to be expected.  相似文献   

19.
Polycrystalline garnets are common in metamorphic rocks and may form as a result of close spacing of nuclei (if clustering is early) or impingement of larger grains (if clustering occurs later in the growth history). The timing of clustering relative to garnet growth is relevant to understanding the formation and evolution of porphyroblasts and evaluating the significance (if any) of clustering. Electron backscattered diffraction (EBSD) analysis of garnet-bearing metamorphic rocks reveals the presence of polycrystalline garnet in nine localities examined in this study: the northern Appalachians (Vermont, Maine, New York, USA); North American Cordillera (North Cascades Range, Washington; Snake Range, Nevada, USA); western Rocky Mountains (British Columbia, Canada); southern Menderes Massif (Turkey); Santander Massif (Colombia); and the Sanandaj–Sirjan zone (Hamadan, Iran). In some samples, polycrystals comprise ~20–30% of garnets analyzed, and chemical and textural evidence suggests that early coalescence of garnet polycrystals is common. Some early-coalescing polycrystals exhibit growth zoning that is concentric about the geometric center of the polycrystal. In thin section, these garnets may be undetectable as polycrystals based on morphology or zoning. In some polycrystals, zoning is unrelated to the location of internal grain boundaries; in others, Fe–Mn–Mg zoning has a different pattern than that of Ca; zoning patterns may vary on the scale of a single thin section. In addition, some polycrystals are characterized by high-angle misorientation boundaries that may be in special (non-random) orientations, an observation that indicates that these polycrystals are not random clusters of grains. The presence of internal grain boundaries may affect diffusion pathways and length scales, and may facilitate communication of porphyroblast interiors with matrix phases, thereby influencing reaction history of the rock and the composition/zoning of garnet.  相似文献   

20.
The development of microstructures and textures (i.e. crystallographic preferred orientations) during recrystallisation of naturally deformed quartz polycrystals has been studied via electron diffraction techniques in the scanning electron microscope. In the investigated sample series of quartz-rich rocks originating from different deformation regimes, the microstructural and textural changes in quartz have been significantly influenced by dynamic recrystallisation. Based on microstructural observations paired with orientation and misorientation analyses down to the scale of grains and subgrains, criteria could be established which characterise the dominant recrystallisation process and its influence on texture development. It is shown that the texture development during dynamic recrystallisation is controlled by a differential activation of slip systems in grains of ‘soft’ and ‘hard’ orientations. The analyses provide further evidence that specific grain orientations are preferred during crystal plastic deformation, recrystallisation and grain growth. The influence of twinning after the Dauphiné law was also investigated. Observations of a progressive reduction in the population of Dauphiné-twin boundaries during recrystallisation and a penetrative deformation in both hosts and twins indicate a generation prior to deformation and recrystallisation. A mechanical origin for twinning and possible influence on texture development was therefore discarded.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号