共查询到20条相似文献，搜索用时 31 毫秒
1.
为进一步研究沉箱-桩复合基础的水平向承载性能,开展粉质黏土中单桩、沉箱-桩复合基础在水平向荷载和竖向及水平向组合荷载作用下的系列试验,对沉箱-桩复合基础的水平荷载与位移关系、桩身弯矩、位移及土抗力分布规律及群桩效应等进行了研究。结果表明,在水平荷载作用下沉箱对桩顶的约束使桩身弯矩分布较桩顶自由情况要更均匀,并能有效地降低桩身弯矩、位移及土抗力,提高了基础水平承载能力;在同时作用有竖向和水平向组合荷载时,沉箱底摩擦力参与抵抗水平力作用、桩顶竖向力也有利于进一步提高基础水平承载力;试验获得了不同桩数、桩顶约束、荷载作用条件下的沉箱-桩复合基础群桩效应系数,对于桩距为6倍桩径的情况,桩与桩之间的相互影响很小。 相似文献
2.
This communication describes an approximate method for generalizing homogeneous, linearly elastic, subgrade type solutions of axial pile response to account for soil creep behaviour. The method is very simple to apply and can be used in conjunction with either analytical or numerical elastic solutions. Exact solutions for limiting cases and finite difference solutions in both space and time are presented to confirm that errors introduced by the approximations are small. Because of the theoretical basis of this approach it is anticipated that method can be used with other pile problems, lateral and axial, for both subgrade adn continuum idealizations. Methods for generalizing the results to more complex conditions such as non-homogeneity or time varying loads are given. 相似文献
3.
This study aims to provide knowledge on the thermo-mechanical behaviour of heat exchanger piles, through a laboratory scale model. The model pile (20 mm in external diameter) was embedded in dry sand. The behaviour of the axially loaded pile under thermal cycles was investigated. After applying the axial load on the pile head, the pile temperature was varied between 5 and 30 °C. Seven tests, corresponding to various axial loads ranging from 0 to 70 % of the pile estimated bearing capacity, were performed. The results on pile head displacement show that heating under low axial load induced heave and cooling induced settlement; the pile temperature-displacement curve was found to be reversible and compatible with the thermal expansion curve of the pile. However, at higher axial loads, irreversible settlement of the pile head was observed after a few thermal cycles. The axial load profile measured by the strain gauges evidenced that the pile head load was mainly transferred to the pile toe. Nevertheless, thermal cycles modified significantly the mobilised skin friction along the pile. The total pressure measured at various locations in the soil mass was also slightly influenced by the thermal cycles. 相似文献
4.
Wang Jun Wu Lei Cai Yuanqiang Guo Lin Du Yunguo Gou Changfei Ni Junfeng Gao Ziyang 《Acta Geotechnica》2021,16(4):1161-1174
In certain field conditions such as offshore projects under wave loads or embankments under traffic loads, both the vertical and horizontal stresses are variable. However, previous investigations rarely considered the variation in horizontal stress. To better understand the characteristics of natural saturated soft clay, a series of monotonic and cyclic triaxial tests with a K0-consolidation state were carried out under a variable confining pressure (VCP) stress path. The development of axial strain, pore water pressure and effective stress path is analysed. The results show that with the increase in η (the ratio of the variation in the mean effective principal stress to that of the deviatoric stress), the undrained shear strength (qf) decreases continuously. The pore water pressure generation is slightly improved under a stress path with increasing confining pressure. Based on the test results, a unified formula was established to predict the pore water pressure under VCP stress paths. The unique p–q–e relationship of normally consolidated clay in monotonic VCP triaxial tests was also demonstrated. Under VCP stress paths, the amplitude of the pore pressure increases, and the effective stress path tilts more sharply to the right. Moreover, a unified formula was established that can provide a good reference for predicting effective stress paths under cyclic VCP triaxial tests.
相似文献5.
This paper presents a shear load transfer function and an analytical method for estimating the load transfer characteristics
of rock-socketed drilled shafts subjected to axial loads. A shear load transfer (f–w) function of rock-socketed drilled shafts is proposed based on the constant normal stiffness (CNS) direct shear tests. It
is presented in terms of the borehole roughness and the geological strength index (GSI) so that the structural discontinuities
and the surface conditions of the rock mass can be considered. An analytical method that takes into account the coupled soil
resistance effects is proposed using a modified Mindlin’s point load solution. Through comparisons with load test results,
the proposed methodology is in good agreement with the general trend observed in in situ measurements and represents an improvement
in the prediction of the shear behavior of rock-socketed drilled shafts. 相似文献
6.
Haleh Rasekh Ali Mirzaghorbanali Jan Nemcik Naj Aziz Xuwei Li 《Geotechnical and Geological Engineering》2017,35(4):1529-1548
The application of cable bolts as a secondary support system is an increasing trend in underground coal mines worldwide. The performances of cable bolts have been evaluated under both axial and shear loading conditions. Two methods of testing cables for shear, single and double shear, have been recognised. This paper examines the shear behaviour of a variety of cable bolts under different pre-tension loads by double shear testing. Plain, spiral and the combination of both cable types were used in this study. The initial axial load and the type of cable bolts are the main factors affecting their shear strength. By increasing the axial pre-tension load, the peak shear load occurs at lower shear displacement. The failure angle due to cable bending across the joint at different pre-tension loads varied between 41° and 49°. This demonstrates that the ratio of axial and perpendicular displacements is almost constant and on average the failure occurs at about 45°. A novel analytical model is proposed to evaluate the shear behaviour of pre-tensioned fully grouted cable bolts subjected to double shearing. Energy and Fourier Series methods were incorporated in the model to simulate the shear behaviour of cable bolts. The comparison of the experimental results with the proposed model shows a good agreement. 相似文献
7.
Yoon Seok Choi Jintae Lee Monica Prezzi Rodrigo Salgado 《Geotechnical and Geological Engineering》2017,35(4):1587-1604
Although the loads applied on piles are usually a combination of both vertical and lateral loads, very limited experimental research has been done on the response of pile groups subjected to combined loads. Due to pile–soil–pile interaction in pile groups, the response of a pile group may differ substantially from that of a single pile. This difference depends on soil state and pile spacing. This paper presents results of experiments designed to investigate pile interaction effects on the response of pile groups subjected to both axial and lateral loads. The experiments were load tests performed on model pile groups (2 × 2 pile groups) in calibration chamber sand samples. The model piles were driven into the sand samples prepared with different relative densities using a sand pluviator. The combined load tests were performed on the model pile groups subjected to different axial load levels, i.e., 0 (pure lateral loading), 25, 50, and 75% of the ultimate axial load capacity of the pile groups, defined as the load corresponding to a settlement of 10% of the model pile diameter. The combined load test results showed that the bending moment and lateral deflection at the head of the piles increased substantially for tests performed in the presence of axial loads, suggesting that the presence of axial loads on groups of piles driven in sand is detrimental to their lateral capacity. 相似文献
8.
研究了云南西部龙陵县上新世的化石木。鉴定出两种木材类型。杜鹃花科杜鹃属的似腋花杜鹃Rhododendron cf. racemosum Franchet，其主要木材特征有散孔材，生长轮略明显，导管具多角形轮廓，螺纹加厚出现在整个导管壁上，梯状穿孔板，射线异形II型。松科华山松Pinus armandii Franchet的主要特征有交叉场纹孔窗格状，具正常轴向和纵向树脂道，且泌脂细胞壁薄，射线管胞内壁平滑或具稀疏的微锯齿。两种类型的化石木在我国均属首次报道。根据化石木结构和现代相应树种和植被的生境范围，当时植物生长于亚热带温凉湿润的山地环境，其海拔大约在1800米左右。 相似文献
9.
Harry G. Poulos 《国际地质力学数值与分析法杂志》1999,23(10):1021-1041
This paper describes the development of an approximate approach for the analysis and design of piles subjected to axial and lateral loading and also to vertical and horizontal ground movements. The analysis involves a number of simplifications in order to make it feasible to implement. For example, it considers the behaviour of a ‘representative’ pile in a group to characterize the behaviour of all piles in the group, and adopts approximations to derive free-field interaction factors from the conventional interaction factors for direct loading. The analysis has been implemented via a computer program called EMbankment PIle Group (EMPIG) and has the ability to incorporate the following features:
- 1. single piles or pile groups,
- 2. applied vertical, lateral and moment loading on the pile cap,
- 3. the effects of axial and lateral soil movements caused by embankment construction,
- 4. a layered soil profile,
- 5. non-linear axial and lateral response of the piles.
10.
软土中桶型基础水平循环承载力的模型试验 总被引：2，自引：0，他引：2
利用真空预压方法制备了一个大尺寸软黏土模型试验土池,进行了不同竖向静荷载与水平循环荷载共同作用下软土中单桶基础承载力的模型试验,研究了竖向静荷载与水平循环荷载对基础承载力的影响。结果表明,基础的水平循环承载力小于静承载力;导致基础破坏的循环荷载与循环次数取决于竖向静荷载。竖向静荷载越大,与同一循环破坏次数对应的循环荷载就越小。依据模型试验土的循环强度变化关系,采用弹塑性有限元计算方法对模型试验进行了数值模拟,计算与试验结果基本吻合,表明可以依据软黏土的循环强度变化关系,通过弹塑性有限元数值计算评价软土地基中桶型基础的水平循环承载力。 相似文献
11.
12.
黄土在应力作用下迂水时力学强度迅速下降 ,产生大范围的快速沉陷。这就是黄土的湿陷性 ,是黄土的诸多特性之一。鉴于对黄土湿陷性以往用各种实验室试验指标进行评价 ,这里提出运用动力触探和静载荷试验进行黄土湿陷性原位评价的一种简便的新方法。该方法的试验程序是 ,先用轻便可变动能触探仪在天然状态和饱水状态下进行触探试验 ,而后在触探孔完成静载荷压缩性试验。运用中国黄土高原黄土原位动力触探和静载荷试验测得的资料 ,详细分析了天然状态的黄土对探头阻力 qdnat,饱水状态的黄土对探头阻力 qdsat,实验室测得的湿陷性指数s压缩曲线参数 (即触探极限压力 ppf,触探蠕变压力ppl 和触探载荷模量Epn)的关系。结果证明所提出的方法适用于原位判定黄土的湿陷性。 相似文献
13.
在桩基负摩阻力的研究中桩土位移需重点关注。作为一种成熟的流场测试手段,颗粒图像测速(paticle image velocimetry, PIV)技术已逐步推广至岩土研究领域,将该技术运用至桩基负摩阻力模型试验,可以弥补传统位移测试方法无法获得位移场分布等缺点。基于试验特点,设计由钢板和有机玻璃壁组成的试验箱,采用千斤顶配合置于土表的载荷板实现对土体加载。试验中,对不同土表超载作用下的土体分层沉降、桩身沉降及轴力进行测定,采用PIV技术对桩端处砂土的位移场实施了采样分析。试验表明,PIV所测位移数值与传统方法测得值吻合较好,PIV分析结果能够直观反映桩基受负摩阻力作用而产生的附加沉降;并且可以判断桩端沉降的影响范围,深度方向基本不超过1.75D（D为直径）,水平方向则基本在桩底边界范围内。最后,总结了PIV技术在模型试验中的运用,提出了几点在今后试验中可待改进的地方。 相似文献
14.
用解析方法研究了管桩在轴向力和水平向力（倾斜力）联合作用下的受力及变形性状。在高层建筑、桥梁工程、海洋工程、新型海堤护岸等工程中桩基自由长度上作用土压力、风荷载、波浪荷载等荷载型式,基桩经常在竖向、水平向荷载同时作用下工作。国内外学者通过大量试验和理论研究得出了计算竖向、水平向荷载下基桩内力和挠度的半经验公式以及张氏法公式。为了分析竖向、水平向荷载同时作用下自由荷载的作用,在现行m法假设的基础上,从弹性桩的挠曲微分方程出发,导出了任意自由荷载作用下桩任意截面的水平变位、倾角、弯矩、剪力和地基反力计算表达式。桩的挠曲微分方程是分段函数,包括地上部分和地下部分桩,相应的内力和变位求解也分为两段。最后通过一个算例分析了桩顶竖向荷载、桩顶水平力和自由荷载对桩身的受力性状各参数的影响。计算结果表明, 桩顶水平力对桩身最大弯矩和桩顶水平变位的影响最大,而桩周内外摩阻力及桩身自重对桩身受力性状影响较小。 相似文献
15.
A 3D numerical model for mechanised excavations is presented, which is capable of simulating the overall process of excavation and construction of a tunnel when a TBM EPB (Tunnel Boring Machine–Earth Pressure Balance) is used.The main construction aspects of a mechanised excavation are modelled. Their influence on calculated ground displacements are investigated by means of a series of parametric analyses.With the aim of testing the performance of the proposed 3D numerical model, a series of 25 Class C predictions has been carried out. Case Histories related to the construction of the 1995–2003 Madrid Metro Extension Project were considered for this purpose.As a general rule, the results obtained with the Modified Cam–Clay model closely fit in situ measurements. When the Linear-Elastic or the Mohr–Coulomb models are used, it is not as easy to summarise the results obtained, as higher fluctuations are observed around in situ measured data. A good agreement is also shown when the distribution of horizontal displacements along depth is considered.For some sections, the mechanised excavation model is not capable of reproducing the high values of the surface settlements measured in situ. A closer look at the results shows that mixed face conditions are found for these cases, with the TBM excavating through layered soil formations having sharply different mechanical behaviour. 相似文献
16.
地应力在软岩或深部煤矿设计、施工与安全生产中具有重要作用。采用空心包体应变计法对朱仙庄煤矿南翼II、III水平进行了地应力原位测试,获得了该矿地应力大小及主要方位;以此作为约束条件,基于多目标约束的最优化方法利用ANSYS软件建立了朱仙庄煤矿南翼地应力最优化反分析模型,反演得出了最优边界条件,并用数值分析了该区域地应力分布特征和变化规律。结果表明:朱仙庄煤矿南翼地应力以水平构造应力为主,且具有明显的方向性,最大主应力值变化范围是20~25 MPa,方位则分布在N 60°E和N 75°E之间,其水平地应力非均匀系数为1.1~1.8。 相似文献
17.
18.
轴向和横向荷载作用下单桩的受力变形分析是桩基研究的重点内容之一。单桩在水平荷载作用下会产生一定的水平位移与弯矩,而此时作用轴向荷载会使得桩体出现一定的压曲与附加弯矩,以致轴横向荷载作用下的单桩受力变形与单独作用水平荷载或轴向荷载的单桩存在较大的区别。故本文基于能量法,首先分别建立轴横向荷载作用下单桩的受力变形能量方程以及桩周土体能量方程,然后考虑桩土变形协调与一定的桩土相互作用,基于最小势能原理得到单桩变形控制微分方程,并采用幂级数法进行求解,最终得到轴横向荷载作用下单桩受力变形分析的幂级数解答。通过编程计算,将本文方法计算结果与试验结果、数值分析结果、规范法计算结果进行对比分析,验证了本文方法的合理性和可行性。在此基础上,基于本文解答进行了影响参数分析,结果表明:桩体长径比、桩土弹性模量比、桩周土模量深度变化系数均对轴横向受荷单桩的桩身水平位移与最大弯矩值有一定的影响,其中桩周土模量深度变化系数以不小于0.6为宜。 相似文献
19.
Constant shear drained tests (CSD) are probably the most suitable to simulate the strength and deformation behaviour of soils
in slopes under water infiltration conditions or lateral stress relief. This is significant because soil behaviour following
a CSD stress path could differ from that of traditional compression triaxial tests. In this paper, CSD tests on sand following
an alternative procedure are presented and discussed. The modified CSD tests were conducted by increasing the pore water pressure
at a constant rate from one end of the specimen with water free to drain from the opposite end. Among the results from specimens
consolidated at variable initial void ratios and principal stress ratios it was revealed that specimens showed a tendency
to dilate even for loose sands; failure was reached at low axial strains; and a pre-failure type of instability could be identified.
The modified procedure has the potential to provide new insights into the failure mechanisms of slopes under a water infiltration
condition. 相似文献
20.
P. Ramírez Oyanguren C. Gonzlez Nicieza M.I. lvarez Fernndez C. Gonzlez Palacio 《Engineering Geology》2008,100(3-4):120-130
This paper analyzes the stability of the Llerin rockfill dam using Barton–Kjaernsli's shear criterion. To fit the parameters of this criterion, a direct shear test was designed that allows in situ calculation, using large-size samples of the shear stress at which failure is produced for different normal loads. These experimental values are then used to obtain more reliable values for the friction angle and the equivalent roughness of the rockfill material.The rockfill of Llerin dam is formed by a suitably ground gonfolite limestone rockfill that serves as a contention dam for a lagoon of mine tailings. The experimental results obtained in in situ tests were compared with those predicted by the shear criterion, subsequently determining the safety coefficient of the rockfill dam using the SLOPE computer program. We conclude that the values estimated via in situ testing permit the behaviour of the containment dam to be predicted more accurately. 相似文献