共查询到20条相似文献，搜索用时 421 毫秒
1.
2.
提出了一种基于相交直线的相对定向方法,提取同名相交直线特征,根据相交条件方程获得相对定向元素。该方法完全不需要同名点数据,能够解决因同名点不足而无法准确定向的问题。通过航空影像、近景影像和倾斜影像的实验表明,该方法能够获得稳定的相对定向结果。采用本文提出的算法与传统的相对定向方法进行联合平差,能够进一步提高相对定向结果的精度和稳定性。 相似文献
3.
城区机载LiDAR数据与航空影像的自动配准 总被引：2，自引：0，他引：2
为解决机载LiDAR数据与航空影像集成应用中二者的配准问题,提出了一种机载LiDAR数据与航空影像配准的方法。首先,直接在LiDAR点云中提取建筑物3维轮廓线,通过将轮廓线规则化得到由两条相互垂直的直线段组成的建筑物角特征,并在航空影像上提取直线特征;然后,根据影像初始外方位元素将建筑物角特征投影到航空影像上,并采用一定的相似性测度在影像上寻找同名的影像角特征;最后,将角特征的角点当作控制点,利用传统的摄影测量光束法区域网平差解求影像新的外方位元素。解算过程中采用循环迭代策略。本方法的主要特点是,直接从LiDAR点云中提取线特征,避免了常规方法从距离图(或强度图)中提取线特征所产生的内插误差。通过与现有基于点云强度图的配准方法的对比实验表明,在低精度初始外方位元素的辅助下,本文方法能够达到较高的配准精度。 相似文献
4.
《The Cartographic journal》2013,50(3):276-285
AbstractTraditionally schematised maps make extensive use of curves. However, automated methods for schematisation are mostly restricted to straight lines. We present a generic framework for topology-preserving curved schematisation that allows a choice of quality measures and curve types. The framework fits a curve to every part of the input. It uses Voronoi diagrams to ensure that curves fitted to disjoint parts do not intersect. The framework then employs a dynamic program to find an optimal schematisation using the fitted curves. Our fully-automated approach does not need critical points or salient features. We illustrate our framework with Bézier curves and circular arcs. 相似文献
5.
This paper is concerned with using linear features in aerial triangulation. Without loss of generality, the focus is on straight lines with the attempt to treat tie lines in the same fashion as tie points. The parameters of tie lines appear in the block adjustment like the tie points do. This requires a unique representation of lines in object space. We propose a four-parameter representation that also offers a meaningful stochastic interpretation of the line parameters. The proposed line representation lends itself to a parameterized form, allowing use of the collinearity model for expressing orientation and tie line parameters as a function of points measured on image lines. The paper describes in detail the derivation of the extended collinearity model and discusses the advantages of this new approach compared to the standard coplanarity model that is used in line photogrammetry. The intention of the paper is to make a contribution to feature-based aerial triangulation on the algorithmic level. 相似文献
6.
针对控制点获取较困难地区卫星影像定位精度不高的情况,对直线特征作为控制信息提升卫星影像定位精度进行了研究。以"像方直线上任意一点必然位于物方直线和投影中心所构成的平面"作为几何约束条件,通过对直线的参数化表示,建立了基于直线特征的共面模型;在该模型基础上,针对航天传感器的成像特点,分析建立了8标定参数的内方位元素模型和简化的外方位元素模型,最终构建了直线特征约束的卫星影像自检校平差模型。利用资源3号(ZY-3)卫星获取的华盛顿地区数据对构建的平差模型进行实验验证。结果表明,该模型能够解决缺乏地面控制点地区影像定位精度差的问题,可达到与常规自检校平差相同量级的精度。 相似文献
7.
Yongjun Zhang Xu Huang Xiangyun Hu Fangqi Wan Liwen Lin 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(6):809-817
Relative orientation based on the coplanarity condition is one of the most important procedures in photogrammetry and computer vision. The conventional relative orientation model has five independent parameters if interior orientation parameters are known. The model of direct relative orientation contains nine unknowns to establish the linear transformation geometry, so there must be four independent constraints among the nine unknowns. To eliminate the influence of over parameterization of the conventional direct relative orientation model, a new relative orientation model with four independent constraints is proposed in this paper. The constraints are derived from the inherent orthogonal property of the rotation matrix of the right image of a stereo pair. These constraints are completely new as compared with the known literature. The proposed approach can find the optimal solution under least squares criteria. Experimental results show that the proposed approach is superior to the conventional model of direct relative orientation, especially at low altitude and close range photogrammetric applications. 相似文献
8.
提出了基于大比例尺航空影像共面约束的相机自检校方法,该方法使用所有立体像对同名点基于共面约束对相机的内方位元素及畸变系数进行解算。首先进行航空影像同名点匹配,构建立体像对;然后基于共面约束使用直接解法和迭代优化进行相对定向,解算相机位置与姿态;最后使用最小二乘优化方法解算相机内方位元素和畸变系数。对于高分辨率大尺寸航空影像,图像中心及边缘的畸变差异较大,为了进一步提高解算精度,对图像进行网格区域划分解算畸变。使用大比例尺航空影像进行解算能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,避免检校环境与使用环境不同解算得到的相机畸变参数不能真实反映所获取影像的畸变问题;使用所有同名点解算,避免由于选择不同特征点或控制点对检校精度的影响;通过区域网格划分,进一步提高了解算精度。对检校结果进行了分析,该方法精度较高,与基于室外检校场的精度相当,能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,提高了三维重建的精度。 相似文献
9.
《ISPRS Journal of Photogrammetry and Remote Sensing》1999,54(5-6):332-341
This paper deals with the orientation of three-line imagery which has been taken during the MOMS-02/D2 experiment in spring 1993, and during the MOMS-2P/PRIRODA mission since April 1996. The reconstruction of the image orientation is based on a combined adjustment of the complete image, ground control, orbit and attitude information. The combined adjustment makes use of the orientation point approach or the orbital constraints approach. In the second case, the bundle adjustment algorithm is supplemented by a rigorous dynamical modeling of the spacecraft motion. The results of the combined adjustment using MOMS-02/D2 imagery and control information of orbit #75b are presented. Based on the orientation point approach an empirical height accuracy of up to 4 m (0.3 pixel) is obtained. In planimetry the empirical accuracy is limited to about 10 m (0.7 pixel), since the ground control points (GCP) and check points could not be identified in the imagery with the required accuracy. Computer simulations on MOMS-2P/PRIRODA image orientation based on realistic input information have shown that good accuracies of the estimated exterior orientation parameters and object point coordinates can be obtained either with a single strip and a few precise GCP or even without ground control information, if a block of several overlapping and crossing strips with high geometric strength (q≈60%) is adjusted. 相似文献
10.
传统的后方交会最小二乘解法需要良好的外方位元素初值。在无初值或者初值不够精确的情况下,最小二乘迭代不容易收敛。在近景摄影测量或者计算机视觉等领域,往往不提供良好的初值,无法适用传统的后方交会解法。针对上述情况,本文提出了一种基于单应性矩阵的后方交会直接解法,在不需要初值的情况下,获取外方位元素的直接解。该方法根据单应性矩阵所描述的平面几何关系,利用单应性矩阵内在的约束条件,将后方交会问题转换为一个二元二次方程组的求解问题。该方法受舍入误差影响小,在无偶然误差的情况下,解算精度能达到10–9量级,能够避免传统直接解法计算复杂的问题,为传统的平差迭代解法提供良好的初值。此外,在多个控制点共面的情况下,该方法能够直接获得外方位元素的精确解。实验结果表明:在各种不同倾角拍摄的情况下,该方法均能够获得稳定的外方位元素,为后续的后方交会最小二乘算法提供良好的初值。采用本文方法计算的初值参与平差,能够达到与人工给定初值平差一致的精度,且迭代收敛速度是人工给定初值平差的2倍以上。在控制点共面的情况下,该方法的反投影精度能够达到亚像素级,且精度优于大部分主流的直接解法。 相似文献
11.
12.
多源高分辨率遥感影像自动匹配算法 总被引：1，自引：0，他引：1
提出一种基于同名直线约束的多源高分辨率遥感影像自动匹配方法。对影像建立高斯滤波模型去噪,然后进行边缘检测,在边缘影像上进行Hough变换,通过端点检测的方法来获取直线;通过粗匹配参数进行同名直线粗匹配,应用梯度模型对同名直线进行精匹配;对影像提取特征点,特征点经过同名直线约束后,在对应影像上利用同名直线约束建立匹配范围。采用最小欧式距离准则在给定范围内提取初始同名点;利用RANSAC算法剔除错误同名点对,以获取最终的匹配结果。实验结果表明,与传统的SIFT匹配算法比较,方法具有可靠性好、提取同名点数量多的优点。 相似文献
13.
提出一种新的顾及相干图质量权重的加权叠加方法,以相干图中相干点的数量成正比来定权,避免了相干性太低的影像参与等权计算。阐述了公用主影像干涉图加权叠加方法的基本原理和数据处理流程,在公用主影像优化选取、减弱大气延迟影响、提高信噪比的数学模型进行改进,降低了影像数要求,提高了监测精度。选择天津地区2003到2006年11景ENVISAT ASAR数据,通过模型优化选取14529影像为公用主影像,进行干涉图加权叠加方法的实例解算,获得比传统DInSAR和Stacking方法更优的监测结果,其精度与精密水准测量相当。 相似文献
14.
Increased use of digital imagery has facilitated the opportunity to use features, in addition to points, in photogrammetric applications. Straight lines are often present in object space, and prior research has focused on incorporating straight–line constraints into bundle adjustment for frame imagery. In the research reported in this paper, object–space straight lines are used in a bundle adjustment with self–calibration. The perspective projection of straight lines in the object space produces straight lines in the image space in the absence of distortions. Any deviations from straightness in the image space are attributed to various distortion sources, such as radial and decentric lens distortions. Before incorporating straight lines into a bundle adjustment with self–calibration, the representation and perspective transformation of straight lines between image space and object space should be addressed. In this investigation, images of straight lines are represented as a sequence of points along the image line. Also, two points along the object–space straight line are used to represent that line. The perspective relationship between image– and object–space lines is incorporated in a mathematical constraint. The underlying principle in this constraint is that the vector from the perspective centre to an image point on a straight–line feature lies on the plane defined by the perspective centre and the two object points defining the straight line. This constraint has been embedded in a software application for bundle adjustment with self–calibration that can incorporate point as well as straight–line features. Experiments with simulated and real data have proved the feasibility and the efficiency of the algorithm proposed. 相似文献
15.
16.
针对视频监控系统中人群异常行为检测准确率低的问题,提出了一种基于时空立方体的人群异常行为检测与定位方法。首先利用光流法计算等间距采样的特征点光流场,然后根据光流场计算特征点的运动速度、方向和方向熵3个特征量,并分别将其统计直方图投影到对应的三维立体空间中,构建描述人群行为的时空立方体特征。同时,将图像分成多个子区域,并计算各子区域的时空立方体特征;设计基于最近邻分类和支持向量机的级联分类器,完成人群异常行为的检测与定位。结果表明,该方法比现有方法能更准确地检测视频中的异常人群。 相似文献
17.
基于模糊算子理论的道路半自动提取 总被引：2，自引：0，他引：2
提出了一种基于模糊算子理论的道路半自动提取方法。该方法在对小比例尺影像进行Sobel边缘检测的基础上，定义了12种模糊算子表示2维道路的各种可能的结构，然后在给定道路种子点附近形成的一定范围内进行搜索，提取出道路的中心线。实验结果表明，该算法速度较快并且具有较强的鲁棒性。 相似文献
18.
从卫星遥感全色图像中自动提取城市目标 总被引：11，自引：0，他引：11
提出了一种从卫星遥感全色图像中自动提取城市目标的方法。在总结城市目标的卫星遥感全色图像特性的基础上 ,设计了一种层次提取的方法。首先在低分辨率图像中提取城市目标的候选区域 ;接着在候选区域内利用城市目标一些更复杂的特性在高分辨率图像中证实城市目标。为了获得城市目标的边界 ,提出了一种基于边缘点密度的算法 ,并将算法应用去提取SPOT图像中的城市目标 ,取得了较好的试验结果 相似文献
19.
Zhizhong Kang Liqiang Zhang Sisi Zlatanova Jonathan Li 《ISPRS Journal of Photogrammetry and Remote Sensing》2010,65(3):282-293
This paper presents an automatic mosaicking method for generating building facade textures from a monocular close-range digital image sequence. The process begins with the computation of the camera parameters (except the coordinates of the projective center), which are determined by combining vanishing point geometry with constraints of a straight line bundle as well as prior information of parallel lines in object space. The raw images are later rectified for the purpose of eliminating their salient geometric distortion. Next, automatic retrieval of the relevant image segment is implemented using the detecting range variance by means of the histogram of projective differences between the corresponding points for each of the facades from the raw image sequence. A strip model of the least-squares adjustment, which is similar to the strip block adjustment in aerial triangulation, is employed to determine the spatial alignment of each of the image segments in order to generate the facade textures from the relevant image segments. Afterwards, the entire building facade texture is mosaicked by ortho-image generation. Two refining strategies are proposed to optimize the mosaic result. One is refining the mosaic region where corresponding points are difficult to match but plenty of horizontal lines are available, and the constraint of corresponding horizontal lines is introduced to implement this process. The other strategy is to refine the unsatisfactory mosaic region by densifying the corresponding points by means of the spatial alignment of the relevant image segment computed by the strip method. The experimental results indicate that this method is widely applicable and compares well with other reported approaches with regard to automation level and applicability, for uncalibrated images as well as images with large geometric distortions. 相似文献
20.
YUAN Xiuxiao 《地球空间信息科学学报》2000,3(1):24-33
1 IntroductionAs is now well known, the high accurate point de-termination with airborne remOe sensing data hasalways ben one of the most fundaxnental prObletns..in aerial photOgrammtry. According to the princi-ple of the geOmtry reversal in photOgramrntry,the interior and exterior orientation elements ofaerial phOtOgraphs must first be known in order toreconstnJct the measuring stereo geometric medels.For the past 60 years, however, the interior orienta-tion parameters of carnera were main… 相似文献