共查询到20条相似文献，搜索用时 718 毫秒
1.
宽范围物性约束技术容易实现、具有一定容错性,目前已在大地电磁测深（MT）和地震、MT和重力联合反演中实现,但该技术是结合模拟退火算法实现的.差分进化算法（DE）是一种全局优化算法,但该算法在地球物理联合反演领域应用较少.基于此,本文以双种群设置方案为框架改进了DE算法,并提出了基于改进DE算法的宽范围物性约束技术.MT和重力联合反演的模型试验表明：与传统的DE算法相比,改进的DE算法收敛速度更快,寻优能力更强;基于改进DE算法的宽范围物性约束技术可以促进不同岩石物性参数在一定"范围"内实现耦合,既可以利用岩石物性关联的导向作用,又可以发挥优化算法的寻优能力,进而降低地球物理联合反演对先验信息的要求;此外,该技术的实现也验证了宽范围物性约束思想在联合反演领域中的适用性,具有进一步推广至其他优化算法中的潜质. 相似文献
2.
联合反演是综合地球物理研究的重要定量解释手段.本文在总结和分析重力与地震资料联合反演的研究现状基础上,利用改进的全局寻优的快速模拟退火算法,实现了重力和地震资料的约束同步联合反演.针对性地设计了密度和速度界面不完全一致的模型,理论模型的试验说明了方法的效果和适用性.结合最近完成的广东徐闻地区实际资料的处理和解释,表明该方法可准确确定复杂构造物性界面的密度和速度结构,在该地区的油气勘探中发挥了作用.在先验信息约束下,该联合反演方法要明显优于单独的重力反演. 相似文献
3.
针对重力与地震联合反演存在的问题,结合已有的研究成果,本文研究实现了速度和密度随机分布共网格单元模型的建模技术,以适应密度和速度剧烈变化的复杂模型及联合反演的计算要求.重力正演利用了该网格的二度半体模型,并进一步改进了地震走时的二维射线追踪计算方法,以适用于速度随机分布的网格介质.结合改进的模拟退火算法,实现了这种共网格条件下的重力与地震资料的同步联合反演.模型试验证明了重力与地震联合反演可以准确确定复杂物性界面的密度和速度结构,适用于物性界面不完全一致和物性变化剧烈的复杂模型,并且联合反演结果要优于单独的重力反演.带先验信息约束下的实际资料的联合反演,进一步证明了该方法的适用性和效果,可提高反演精度并减少多解性. 相似文献
4.
岩石物性约束是地球物理联合反演重要的实现方式.在以往联合反演研究中,这种约束通常以点对点的映射方式出现,要求经验性的岩石物性关联是相对精确的,无形中提高了岩石物性约束应用于联合反演的条件.基于此,本文结合全局寻优的模拟退火算法,提出了宽范围岩石物性约束技术.该技术将岩石物性约束与模拟退火模型扰动、模型接受准则相结合,实现了空间对空间的映射,将电阻率和速度耦合在一起.文章以MT和地震正则化同步联合反演为例,检验了不同的先验信息条件下的宽范围岩石物性约束技术的适用性.模型试验表明:新技术容易实现,容错性高,可降低"不精确"岩石物性关联信息引入带来的风险,提高岩石物性约束应用的灵活性. 相似文献
5.
6.
如何得到快速稳定的反演结果和更清晰的地质体分界面等问题仍然是当前MT反演研究的一个重点.为了解决反演结果不能得到清晰的电性分界面的问题,本文在前人研究的基础上,基于OCCAM反演以及突出尖锐边界反演的思想,结合最小支撑梯度泛函,构建了新的反演目标函数,并利用共轭梯度法优化目标函数,实现了一种光滑模型与尖锐边界结合的MT二维反演方法.模型实验证明了该方法的准确性,通过与已发表的相关反演方法的结果进行比较,证明了该方法在光滑稳定的基础上可突出对尖锐电性边界的刻画.对广东徐闻地区的实测MT资料进行了处理,表明了该方法的适用性和效果. 相似文献
7.
模拟退火法是一种全局寻优算法,在地球物理反演中得到广泛应用.本文应用快速模拟退火法对中国南海海域的重力垂直梯度进行反演来获得中国南海高分辨率海底地形,首先推导出密度界面与重力垂直梯度的对应关系,然后利用理论模型试验证明快速模拟退火法能成功地根据重力垂直梯度来计算密度界面的变化,最后将其应用于由Geosat,ERS-1/2,T/P,Jason-1,EnviSat-1卫星测高数据计算得到的中国南海海域重力垂直梯度异常,反演得到的中国南海海底地形与LDEO船测海深相接近,两者之间差的最大值为0.24 km. 相似文献
8.
9.
对不同地球物理方法的数据进行联合反演,通过模型参数的相互约束可以减小反演的多解性.本文对电阻率法和重力勘探数据开展了基于电阻率和剩余密度梯度累加约束的二维联合反演研究.电阻率法采用数据空间Occam反演,重力勘探采用基于对数障碍法的正则化反演.通过在电阻率法和重力勘探反演的目标函数中引入电阻率和剩余密度梯度累加约束项,利用交替迭代方式实现了电阻率法和重力勘探数据的二维联合反演.对理论模型合成数据进行了单方法反演和联合反演,对比了反演效果.结果表明：联合反演结果优于单方法反演结果,联合反演结果对异常体的物性值恢复和形态刻画效果更好. 相似文献
10.
《地球物理学进展》2016,(2)
介绍了磁源瞬变电磁法(TEM)拟大地电磁法(MT)二维反演技术,总结出一套基于拟MT二维反演技术的磁源TEM实测资料处理流程,并对其关键流程进行了较为详细的介绍.对陕西某矿区磁源TEM实测资料进行拟MT二维反演,结果表明:反演结果对异常刻画的更加细致,反映出了近地表的低阻异常,深部的低阻异常范围也更加集中,优于视电阻率拟断面图结果;根据15、17和19线TE和TM联合反演的结果,推断了两条断裂F和F_1~2,F_1~2断裂与已知地层岩性分界面处的断裂相吻合,据此划分了勘探区的地层分布;结合矿区岩矿石电性特征、成矿构造特征和化探异常范围,推断反演结果中的低阻异常可能与成矿相关,为下一步地质下钻提供了物探依据.文章利用拟MT二维反演方法实现了磁源TEM实测数据二维反演解释,并取得了较好的地质效果,得出磁源TEM拟MT二维反演技术可在实际资料处理中予以推广使用的结论. 相似文献
11.
电阻率测井反演问题解的局部收敛性和非唯一性增加了测井解释的难度，影响了实际的应用，把测量原理迥异的感应型和电流型测井结果联合起来反演，是减小这些影响的有效方法，利用经测井理论和反演技术，建立了适用感应－横向组合测井响应的联合演算法，研究了单一的横向测井反演的感应－横向联合反演的局部收敛性、非唯一性及解的偏差，结果表明，联合反演更有利于同时确定地层电阻率、侵入半径和侵入带电阻率，当初值地较大范围内变化时，反演结果均能在真值或真值附近收敛，改善了反演结果的局部收敛性，增加了反演结果的可信度，避免了差异较大乃至相互矛盾的解，现场实例证实了这一结论。 相似文献
12.
Two‐dimensional joint inversions of cross‐hole resistivity data and resolution analysis of combined arrays 
下载免费PDF全文
下载免费PDF全文 In this study, a new two‐dimensional inversion algorithm was developed for the inversion of cross‐hole direct current resistivity measurements. In the last decades, various array optimisation methods were suggested for resistivity tomography. However, researchers have still collected data by using classical electrode arrays in most cross‐hole applications. Therefore, we investigated the accuracy of both the individual and the joint inversion of the classical cross‐hole arrays by using both synthetic and field data with the developed algorithm. We showed that the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole electrode arrays gives inverse solutions that are closer to the real model than the individual inversions of the electrode array datasets for the synthetic data inversion. The model resolution matrix of the suggested arrays was used to analyse the inversion results. This model resolution analysis also showed the advantage of the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole arrays. We also used sensitivity sections from each of the arrays and their superpositions to explain why joint inversion gives better resolution than the any individual inversion result. 相似文献
13.
为了准确的探测和描绘地下复杂的地质结构,同时克服地球物理单一方法反演的多解性和单一参数反演模型的不一致性等问题,近年来基于交叉梯度联合反演的综合地球物理解释已经得到了广泛的关注和应用.本文首先研究了两种地球物理方法的交叉梯度联合反演算法,在此基础上,推导并实现了多种地球物理方法(大地电磁,重力,磁法,地震初至波走时)的多交叉梯度约束的二维联合反演算法;其次,我们设计了结构不一致模型和复杂模型,针对多物性联合反演算法的准确性和有效性进行了模拟试算,并对复杂模型的单独反演结果和联合反演结果进行了交叉梯度值和物性交会图的对比;最后,本文将成熟的卫星资料多光谱综合分析技术应用到联合反演中,将多物性参数反演模型结果图通过RGB(红-绿-蓝)模式进行合成,得到融合的RGB合成图.结果表明:通过对结构不一致模型和复杂模型的联合反演结果和单独反演结果的对比分析,可以得出联合反演得到的结果更接近真实模型,并从得到的交叉梯度值进一步证明了联合反演模型相似度高,也从物性交会图中得到联合反演的物性相关性更好的结论,反向证明了算法的正确性.最终从得到的RGB合成图像,我们可以更直观的分析反演结果,更有利于准确划分地下模型结构. 相似文献
14.
İrfan Akca Thomas Günther Mike Müller‐Petke Ahmet T. Başokur Ugur Yaramanci 《Geophysical Prospecting》2014,62(2):364-376
Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions. 相似文献
15.
基于岩石物理和地震反演理论,提出了一种同步反演储层孔隙度和含水饱和度的方法.以岩石物理为基础,建立了砂泥岩储层物性和弹性参数之间定量的关系-Simon模型,以贝叶斯理论为手段,结合不同类型的砂泥岩储层,建立了多信息联合约束的物性参数反演目标函数,并通过蒙特卡罗和遗传算法相结合的思路求解该目标函数,最终得到孔隙度和含水饱和度的同步反演结果.将该方法应用于河道砂和砂砾岩两种不同的砂泥岩储层中,孔隙度和含水饱和度数据的联合应用,进一步减少了储层预测的多解性,为石油地质综合研究提供了更加丰富准确的基础数据. 相似文献
16.
In order to couple spatial data from frequency‐domain helicopter‐borne electromagnetics with electromagnetic measurements from ground geophysics (transient electromagnetics and radiomagnetotellurics), a common 1D weighted joint inversion algorithm for helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics data has been developed. The depth of investigation of helicopter‐borne electromagnetics data is rather limited compared to time‐domain electromagnetics sounding methods on the ground. In order to improve the accuracy of model parameters of shallow depth as well as of greater depth, the helicopter‐borne electromagnetics, transient electromagnetics, and radiomagnetotellurics measurements can be combined by using a joint inversion methodology. The 1D joint inversion algorithm is tested for synthetic data of helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics. The proposed concept of the joint inversion takes advantage of each method, thus providing the capability to resolve near surface (radiomagnetotellurics) and deeper electrical conductivity structures (transient electromagnetics) in combination with valuable spatial information (helicopter‐borne electromagnetics). Furthermore, the joint inversion has been applied on the field data (helicopter‐borne electromagnetics and transient electromagnetics) measured in the Cuxhaven area, Germany. In order to avoid the lessening of the resolution capacities of one data type, and thus balancing the use of inherent and ideally complementary information content, a parameter reweighting scheme that is based on the exploration depth ranges of the specific methods is proposed. A comparison of the conventional joint inversion algorithm, proposed by Jupp and Vozoff ( 1975 ), and of the newly developed algorithm is presented. The new algorithm employs the weighting on different model parameters differently. It is inferred from the synthetic and field data examples that the weighted joint inversion is more successful in explaining the subsurface than the classical joint inversion approach. In addition to this, the data fittings in weighted joint inversion are also improved. 相似文献
17.
为了降低单一地球物理方法反演的多解性及受噪声的影响程度,本文围绕重力、磁法和大地电磁法开展了三维联合反演的研究.重、磁采用基于对数障碍法的正则化反演算法,大地电磁使用limited-memory BroydenFletcher-Goldfarb-Shanno(L-BFGS)反演算法,引入交叉梯度函数实现了三种物性结构的相互耦合,最终开发出一套重磁电三维联合反演算法,并实现MPI并行加速计算.通过理论模型算例验证了算法的准确性,结果表明:不论是单棱柱体模型还是组合棱柱体模型,联合反演结果相较单独反演对于异常体的空间形态刻画以及物性数值恢复具有较好的提升;单棱柱体模型算例使得异常体的物性参数(密度、磁化率和电阻率)更加接近于真实的物性参数;组合棱柱体模型的联合反演结果不仅仅消除了围岩物性参数的假异常,而且还增强了异常体边界结构的恢复程度. 相似文献
18.
Rongzhe Zhang Tonglin Li Xinhui Deng Xingguo Huang Yongchol Pak 《Geophysical Prospecting》2020,68(2):721-731
In recent years, joint inversion has been widely used for integrated geological interpretation. We extended a data-space joint inversion algorithm of magnetotelluric, gravity and magnetic data to include first-arrival seismic travel-time and normalized cross-gradient constraints. We describe the main features of the algorithm and apply it to synthetic data generated for hypothetical models. For the synthetic data, we find that the joint inversion with multiple parameters is superior to the joint inversion with two or even three parameters, which can reduce the multisolution of inversion results more effectively. Furthermore, data-space joint inversion involves fewer memory requirements and better calculation speeds than traditional model-space joint inversion. The normalized cross-gradient constraints can better couple model parameters of different magnitudes compared with traditional unnormalized cross-gradient constraints, resulting in higher levels of structural similarity among resistivity, density, magnetic susceptibility and velocity models. 相似文献
19.
Conventional joint PP—PS inversion is based on approximations of the Zoeppritz equations and assumes constant VP/VS; therefore, the inversion precision and stability cannot satisfy current exploration requirements. We propose a joint PP—PS inversion method based on the exact Zoeppritz equations that combines Bayesian statistics and generalized linear inversion. A forward model based on the exact Zoeppritz equations is built to minimize the error of the approximations in the large-angle data, the prior distribution of the model parameters is added as a regularization item to decrease the ill-posed nature of the inversion, low-frequency constraints are introduced to stabilize the low-frequency data and improve robustness, and a fast algorithm is used to solve the objective function while minimizing the computational load. The proposed method has superior antinoising properties and well reproduces real data. 相似文献
20.
本文针对蒸汽辅助重力泄油(SAGD)生产中开发监测问题,发展了综合应用地震及重力数据反演储层密度的联合反演算法.通过测井数据建立纵波阻抗与密度的直接关系,并推导出这种关系下重力与纵波阻抗数据联合反演的计算方法,从而计算出蒸汽腔体密度分布规律.文中应用密度反演后验约束正则化方法,采用Tikhonov正则化模型,通过波阻抗数据作为约束进行联合反演,在算法上提高了稳定性,同时得到较高的反演精度.文中对SAGD生产中的理论模型进行了方法试算,并分析了算法的误差,最终应用于SAGD生产的实际数据中,通过最终反演结果分析,该方法取得了很好的应用效果. 相似文献