共查询到20条相似文献，搜索用时 656 毫秒
1.
Two distinct types of en-echelon vein arrays are recognised, those which form in active ductile shear zones and those which form by the primary nucleation of fractures not connected with active shear zones. The theoretical relation between vein width and orientation in a zone undergoing progressive simple shear is examined and compared with similar data from natural arrays. It is found that many veins have undergone dilation prior to rotation during simple shear, showing that shearing occurred after the en-echelon array was established. Generally, all strongly sigmoidal veins occur in arrays in which pressure solution was also active. In non-sigmoidal arrays there is a clear relation between the amount of overlap of adjacent veins and the orientation of the veins relative to the zone containing them. Two different patterns of dilation and distortion of arrays in which pressure solution was not active are described. It is concluded that primary en-echelon veins originated as tensile fractures, whilst en-echelon veins formed in active shear zones originated as shear fractures. 相似文献
2.
瓦房店金伯利岩热液蚀变强烈,原岩矿物组分几乎蚀变殆尽,显微镜下对蚀变矿物鉴定相当困难.利用X射线粉晶衍射技术对蚀变金伯利岩物相进行系统检测,结果显示：42号岩管金伯利岩主要矿物为蛇纹石、金云母和滑石,有少量方解石、锐钛矿、磷灰石、石英、钛铁矿、钙钛矿、榍石、磁铁矿和绿泥石;石灰窑1号无矿金伯利岩岩管主要矿物为蛇纹石、金云母和白云石,有少量方解石、锐钛矿、磷灰石、滑石、磁铁矿和绿泥石;9号无矿金伯利岩岩脉主要矿物为方解石和石英,有少量绿泥石和重晶石;51号贫矿金伯利岩岩管主要矿物为蛇纹石和金云母,方解石化作用不均匀,白云石化作用普遍,有少量锐钛矿、滑石、磁铁矿、绿泥石、磷灰石、钛铁矿、石英;30号贫矿岩管样品风化严重,主要矿物为蒙脱石,有少量方解石、滑石、蛇纹石、榍石、磷灰石.实践证明,采用X射线粉晶衍射仪鉴定金伯利岩蚀变矿物组合是一种非常可行的技术手段. 相似文献
3.
The interplay between fracture propagation and fluid composition and circulation has been examined by deciphering vein sequences in Silurian and Devonian limestones and shales at Kosov quarry in the Barrandian Basin. Three successive vein generations were recognised that can be attributed to different stages of a basinal cycle. Almost all generations of fracture cements host abundant liquid hydrocarbon inclusions that indicate repeated episodes of petroleum migration through the strata during burial, tectonic compression and uplift.The earliest veins that propagated prior to folding were displacive fibrous “beef” calcite veins occurring parallel to the bedding of some shale beds. Hydrocarbon inclusions within calcite possess homogenisation temperatures between 58 and 68 °C and show that the “beef” calcites originated in the deeper burial environment, during early petroleum migration from overpressured shales.E–W-striking extension veins that postdate “beef” calcite formed in response to Variscan orogenic deformations. Based on apatite fission track analysis (AFTA) data and other geological evidence, the veins probably formed 380–315 Ma ago, roughly coinciding with peak burial heating of the strata, folding and the intrusion of Variscan synorogenic granites. The veins that crosscut diagenetic cements and low-amplitude stylolites in host limestones are oriented semi-vertically to the bedding plane and are filled with cloudy, twinned calcite, idiomorphic smoky quartz and residues of hardened bitumen. Calcite and quartz cements contain abundant blue and blue–green-fluorescing primary inclusions of liquid hydrocarbons that homogenise between 50 and 110 °C. Geochemical characteristics of the fluids as revealed by gas chromatography–mass spectrometry, particularly the presence of olefins and parent aromatic hydrocarbons (phenonthrene), suggest that the oil entrapped in the inclusions experienced intense but geologically fast heating that resulted in thermal pyrolysis of its hydrocarbons. This implies that the organic fluids in the fractures may have been partly influenced by heating associated with igneous intrusions that are hidden below the surface.Subvertical N–S-striking veins represent the most recent fracturing event(s). Some of these veins are only a few millimeters thick and sparsely mineralised with thin leaf-like quartz crystals that contain tiny blue and yellow–orange-fluorescing hydrocarbon inclusions. Most of the N–S veins, however, occur as thick calcite veins that generally crystallised at 70 °C or less from H 2O–NaCl solutions of variable salinity with admixture of petroleum. The origin of these fluids is interpreted in terms of deeply circulating meteoric waters that partially mixed with deep basinal fluids. Wider structural considerations combined with fission-track analysis of adjacent host sediments suggest that N–S veins formed during post-Mesozoic uplift of the area, probably in response to major Tertiary Alpine deformations transmitted far into the Bohemian Massif. 相似文献
4.
Pelitic schists of the Sanbagawa metamorphic belt contain several types of polymineralic veins that formed during the late
stages of exhumation. The vein mineral assemblages are quartz + albite + K-feldspar + chlorite ± calcite (Type I, II) and
quartz + albite + calcite (Type III). Type I and II veins contain quartz and albite with stretched-crystal and elongate-blocky
textures, respectively. The mineral species within Type I veins vary with compositional bands within the host rocks. Type
III veins are characterized by euhedral to subhedral quartz grains with concentric zoning and a homogeneous distribution along
the vein length. The vein textures vary depending on the crack aperture during multiple crack-seal events: <0.08 mm for Type
I, and 0.5–10 mm for Type III. Type II veins show intermediate features between Type I and III veins in terms of mineral distribution
(weak dependence on the host rock composition) and apparent crack aperture (less than 1–15 mm). These observations suggest
a transition in the dominant transport mechanism of vein components with increasing crack aperture, from diffusion from host
rocks to fluid advection along cracks. 相似文献
5.
Syntectonic antitaxial and ataxial fibrous veins were investigated using SEM, microprobe, cathodoluminescence (CL) and optical microscopy. In antitaxial calcite veins, fibres and surrounding selvage grew simultaneously, with similar growth rates of crystallographically differently oriented grains. New material precipitated at the vein margin in antitaxial and bi-mineralic ataxial microstructures. Bridges of country rock material formed during vein growth in an initial en-echelon vein system. In our antitaxial and bi-mineralic ataxial samples, the spacing of solid inclusions does not reflect individual crack-seal openings. 相似文献
6.
山东蒙阴金伯利岩组成矿物以蚀变矿物为主,X射线粉晶衍射仪鉴定结果显示无矿金伯利岩矿物组分为方解石、白云石、石英、钙锆钛矿,标志性矿物为白云石和钙锆钛矿;贫矿金伯利岩矿物组分为蛇纹石、方解石、钙铝榴石、磁铁矿和金云母,标志性矿物为钙铝榴石;富矿金伯利岩矿物组分为蛇纹石、方解石、绿泥石、磷灰石、磁铁矿和金云母,标志性矿物为绿泥石和磷灰石。采用X射线粉晶衍射仪鉴定金伯利岩蚀变矿物组合,寻找蚀变矿物组分变化与金伯利岩含矿性的关系,利用标志性的蚀变矿物判断金伯利岩无矿、贫矿还是富矿,是非常有意义的。 相似文献
7.
Renard 65, a diamondiferous pipe in the Neoproterozoic Renard kimberlite cluster (Québec, Canada), is a steeply-dipping and downward-tapering diatreme comprised of three pipe-filling units: kimb65a, kimb65b, and kimb65d. The pipe is surrounded by a marginal and variably-brecciated country rock aureole and is crosscut by numerous hypabyssal dykes: kimb65c. Extensive petrographic and mineralogical characterization of over 700 m of drill core from four separate drill holes, suggests that Renard 65 is a Group I kimberlite, mineralogically classified as phlogopite kimberlite and serpentine-phlogopite kimberlite. Kimb65a is a massive volcaniclastic kimberlite dominated by lithic clasts, magmaclasts, and discrete olivine macrocrysts, hosted within a fine-grained diopside and serpentine-rich matrix. Kimb65b is massive, macrocrystic, coherent kimberlite with a groundmass assemblage of phlogopite, spinel, perovskite, apatite, calcite, serpentine and rare monticellite. Kimb65c is a massive, macrocrystic, hypabyssal kimberlite with a groundmass assemblage of phlogopite, serpentine, calcite, perovskite, spinel, and apatite. Kimb65d is massive volcaniclastic kimberlite with localized textures that are intermediate between volcaniclastic and coherent, with tightly packed magmaclasts separated by a diopside- and serpentine-rich matrix. Lithic clasts of granite-gneiss in kimb65a are weakly reacted, with partial melting of feldspars and crystallization of richterite and actinolite. Lithic clasts in kimb65b and kimb65d are entirely recrystallized to calcite + serpentine/chlorite + pectolite and display inner coronas of diopside-aegirine and an outer corona of phlogopite. Compositions are reported for all minerals in the groundmass of coherent kimberlites, magmaclasts, interclast matrices, and reacted lithic clasts. The Renard 65 rocks are texturally classified as Kimberley-type pyroclastic kimberlites and display transitional textures. The kimberlite units are interpreted to have formed in three melt batches based on their distinct spinel chemistry: kimb65a, kimb65b and kimb65d. We note a strong correlation between the modal abundances of lithic clasts and the textures of the kimberlites, where increasing modal abundances of granite/gneiss are observed in kimberlites with increasingly fragmental textures. 相似文献
8.
We present petrographic and mineral chemical data for a suite of samples derived from the De Beers dyke, a contemporaneous, composite intrusion bordering the De Beers pipe (Kimberley, South Africa). Petrographic features and mineral compositions indicate the following stages in the evolution of this dyke: (1) production of antecrystic material by kimberlite-related metasomatism in the mantle (i.e., high Cr-Ti phlogopite); (2) entrainment of wall-rock material during ascent through the lithospheric mantle, including antecrysts; (3) early magmatic crystallisation of olivine (internal zones and subsequently rims), Cr-rich spinel, rutile, and magnesian ilmenite, probably on ascent to the surface; and (4) crystallisation of groundmass phases (i.e., olivine rinds, Fe-Ti-rich spinels, perovskite, apatite, monticellite, calcite micro-phenocrysts, kinoshitalite-phlogopite, barite, and baddeleyite) and the mesostasis (calcite, dolomite, and serpentine) on emplacement in the upper crust. Groundmass and mesostasis crystallisation likely forms a continuous sequence with deuteric/hydrothermal modification. The petrographic features, mineralogy, and mineral compositions of different units within the De Beers dyke are indistinguishable from one another, indicating a common petrogenesis. The compositions of antecrysts (i.e., high Cr-Ti phlogopite) and magmatic phases (e.g., olivine rims, magnesian ilmenite, and spinel) overlap those from the root zone intrusions of the main Kimberley pipes (i.e., Wesselton, De Beers, Bultfontein). However, the composition of these magmatic phases is distinct from those in ‘evolved’ intrusions of the Kimberley cluster (e.g., Benfontein, Wesselton water tunnel sills). Although the effects of syn-emplacement flow processes are evident (e.g., alignment of phases parallel to contacts), there is no evidence that the De Beers dyke has undergone significant pre-emplacement crystal fractionation (e.g., olivine, spinel, ilmenite). This study demonstrates the requirement for detailed petrographic and mineral chemical studies to assess whether individual intrusions are in fact ‘evolved’; and that dykes are not necessarily produced by differentiated magmas. 相似文献
9.
Distinctly different groundmass mineralogy characterise the hypabyssal facies, Mesoproterozoic diamondiferous P3 and P4 intrusions from the Wajrakarur Kimberlite Field, southern India. P3 is an archetypal kimberlite with macrocrysts of olivine and phlogopite set in a groundmass dominated by phlogopite and monticellite with subordinate amounts of serpentine, spinel, perovskite, apatite, calcite and rare baddeleyite. P4 contains mega- and macrocrysts of olivine set in a groundmass dominated by clinopyroxene and phlogopite with subordinate amounts of serpentine, spinel, perovskite, apatite, and occasional gittinsite, and is mineralogically interpreted as an olivine lamproite. Three distinct populations of olivine, phlogopite and clinopyroxene are recognized based on their microtextural and compositional characteristics. The first population includes glimmerite and phlogopite–clinopyroxene nodules, and Mg-rich olivine macrocrysts (Fo 90–93) which are interpreted to be derived from disaggregated mantle xenoliths. The second population comprises macrocrysts of phlogopite and Fe-rich olivine (Fo 81–89) from P3, megacrysts and macrocrysts of Fe-rich olivine (Fo 85–87) from P4 and a rare olivine–clinopyroxene nodule from P4 which are suggested to have a genetic link with the precursor melt of the respective intrusions. The third population represents clearly magmatic minerals such as euhedral phenocrysts of Fe-rich olivine (Fo 85–90) crystallised at mantle depths, and olivine overgrowth rims formed contemporaneously with groundmass minerals at crustal levels. Close spatial association and contemporaneous emplacement of P3 kimberlite and P4 lamproite is explained by a unifying petrogenetic model which involves the interaction of a silica-poor carbonatite melt with differently metasomatised wall rocks in the lithospheric mantle. It is proposed that the metasomatised wall rock for lamproite contained abundant MARID-type and phlogopite-rich metasomatic veins, while that for kimberlite was relatively refractory in nature. 相似文献
10.
Cr-poor and Cr-rich megacryst suites, both comprising of varying proportions of megacrysts of orthopyroxene, clinopyroxene, garnet, olivine, ilmenite and a number of subordinate phases, coexist in many kimberlites, with wide geographic distribution. In rare instances, the two suites occur together on the scale of individual megacryst hand specimens. Deformation textures are common to both suites, suggesting an origin related to the formation of the sheared peridotites that also occur in kimberlites. Textures and compositions of the latter are interpreted to reflect deformation and metasomatism within the thermal aureole surrounding the kimberlite magma in the mantle. The megacrysts crystallized in this thermal aureole in pegmatitic veins representing small volumes of liquids derived from the host kimberlite magma, which were injected into a surrounding fracture network prior to kimberlite eruption. Close similarities between compositions of Cr-rich megacryst phases and those in granular lherzolites are consistent with early crystallization from a primitive kimberlite liquid. The low-Cr megacryst suite subsequently crystallized from residual Cr-depleted liquids. However, the Cr-poor suite also reflects the imprint of contamination by liquids formed by melting of inhomogeneously distributed mantle phases with low melting temperatures, such as calcite and phlogopite, present within the thermal aureole surrounding the kimberlite magma reservoir. Such carbonate-rich melts migrated into, and mixed with some, but not all, of the kimberlite liquids injected into the mantle fracture network. Contamination by the carbonate-rich melts changed the Ca–Mg and Mg–Fe crystal–liquid distribution coefficient, resulting in the crystallization of relatively Fe-rich and Ca-poor phases. The implied higher crystal-melt Mg–Fe distribution coefficient for carbonate-rich magmas accounts for the generation of small volumes of Mg-rich liquids that are highly enriched in incompatible elements (i.e. primary kimberlite magmas). The inferred metasomatic origin for the sheared peridotites implies that this suite provides little or no information regarding vertical changes in the thermal, chemical and mechanical characteristics of the mantle. 相似文献
11.
This paper presents a new approach to constrain paleoburial and subsequent uplift by folding in fold-thrust belts, combining differential stress estimates from mechanically-induced calcite twins with the assumption that stress in the upper crust is in frictional equilibrium. Calcite twin data were collected from pre-folding veins in late Cretaceous limestones from the Ionian zone in Albania in order to (1) determine Paleogene-Neogene stresses associated with the development of the major vein sets in the frontal anticlines of the Outer Albanides and (2) estimate paleoburial of the Cretaceous reservoir rocks during pre-folding flexural subsidence of the foreland. The first vein set (set I) trends N140 (± 20) and the second set (set II) is oriented N060 (± 20). Calcite twinning analysis from set I veins reveals a pre-folding N030° extension likely related to foreland flexure; a later pre-folding, NE-directed compression (LPS) is identified either from one or from both vein sets in the samples from the Saranda anticline; this NE compression is instead recorded by twinning in set II veins from the Kremenara anticline during late stage fold tightening. This NE compression well agrees with independent microtectonic data, regional transport direction and contemporary stress. The differential stress values related to this NE compression are combined with the hypothesis of crustal frictional stress equilibrium to derive first-order estimates of paleoburial of the Cretaceous limestones just before they were uplifted by folding. The ~ 4 km paleoburial of these limestones estimated in the Saranda anticline is consistent with independent paleoburial estimates from stratigraphy, maturity rank of organic matter, paleotemperature/paleogeothermal gradients from fluid inclusions and predictions of kinematic modelling of the Albanian foreland. Our results therefore place reliable constraints on the amount and rate of vertical uplift of these Cretaceous limestones and yield a promising methodology for better constraining paleoburial and therefore erosion and uplift in fold-thrust belts. 相似文献
12.
This paper presents a new model of fault development in carbonate rocks involving a crack–seal–slip sequence. The structures of sheared calcite veins from the Les Matelles outcrop, Languedoc (S. France), and the observations used to construct this new model which integrates aspects of `crack–seal' evolution of calcite-filled veins with concepts of fault valve behaviour are described. In our model, hydraulic mode I reopening of an oblique pre-existing vein in an overall strike-slip stress regime is accompanied by precipitation of calcite, but significant fault slip cannot occur initially despite this obliquity because the ends of the pre-existing structure limit further reopening propagation beyond the tips. The rate of aligned calcite precipitation keeps pace with the rate of dilation of the structure, so that calcite cement essentially seals the system. Stress concentrations at the tips are allowed to rise with reopening until failure of the tip zone results in branch crack formation, triggering both slip along the vein and hydraulic pressure drop. This is followed by sealing within the branch cracks. Such a crack–seal–slip cycle may be repeated several times, as evidenced by fault-perpendicular calcite vein growth interlayered with calc-mylonite lamellae within these structures. Later cycles will become less pronounced because strength recovery of the sealed branch cracks does not regain the initial strength of the intact rock. This model could apply at various scales, and could be a mechanism for triggering earthquakes. 相似文献
13.
A suite of spinel lherzolite and wehrlite xenoliths from a Devonian kimberlite dyke near Kandalaksha, Kola Peninsula, Russia, has been studied to determine the nature of the lithospheric mantle beneath the northern Baltic Shield. Olivine modal estimates and Fo content in the spinel lherzolite xenoliths reveal that the lithosphere beneath the Archaean–Proterozoic crust has some similarities to Phanerozoic lithospheric mantle elsewhere. Modal metasomatism is indicated by the presence of Ti-rich and Ti-poor phlogopite, pargasite, apatite and picroilmenite in the xenoliths. Wehrlite xenoliths are considered to represent localised high-pressure cumulates from mafic–ultramafic melts trapped within the mantle as veins or lenses. Equilibration temperatures range from 775 to 969 °C for the spinel lherzolite xenoliths and from 817 to 904 °C for the wehrlites. Laser ablation ICP-MS data for incompatible trace elements in primary clinopyroxenes and metasomatic amphiboles from the spinel lherzolites show moderate levels of LREE enrichment. Replacement clinopyroxenes in the wehrlites are less enriched in LREE but richer in TiO2. Fractional melt modelling for Y and Yb concentrations in clinopyroxenes from the spinel lherzolites indicates 7–8% partial melting of a primitive source. Such a volume of partial melt could be related to the 2.4–2.5 Ga intrusion of basaltic magmas (now metamorphosed to garnet granulites) in the lower crust of the northern Baltic Shield. The lithosphere beneath the Kola Peninsula has undergone several episodes of metasomatism. Both the spinel lherzolites and wehrlites were subjected to an incomplete carbonatitic metasomatic event, probably related to an early carbonatitic phase associated with the 360–380 Ma Devonian alkaline magmatism. This resulted in crystallisation of secondary clinopyroxene rims at the expense of primary orthopyroxenes, with development of secondary forsteritic olivine and apatite. Two separate metasomatic events resulted in the crystallisation of the Ti–Fe-rich amphibole, phlogopite and ilmenite in the wehrlites and the low Ti–Fe amphibole and phlogopite in the spinel lherzolites. Alternatively, a single metasomatic event with a chemically evolving melt may have produced the significant compositional differences seen in the amphibole and phlogopite between the spinel lherzolites and wehrlites. The calculated REE pattern of a melt in equilibrium with clinopyroxenes from a cpx-rich pocket is identical to that of the kimberlite host, indicating a close petrological relationship. 相似文献
14.
我们把脉体充填的断裂构造的发生发展过程分为三个阶段:生成阶段、发展阶段和破坏阶段。第一阶段主要地是在水平的挤压应力作用下发生的,一般在(水)平面上形成两组剪性断裂和一组横向张性断裂,而在横剖面上则出现两组纵向压性断裂,有时还见一组张裂。这种立体空间形变特点反映在平面上构成“米”字型。此外,还有其他一些断裂。 相似文献
15.
鲁西地区作为华北克拉通的一部分,自古元古代早期（约2400Ma）二长花岗质岩石侵位以后至晚古生代（约250Ma）,一直处于板内稳定地块状态,在这漫长的2150Ma年里仅形成了两期脉岩,即四堡期侵位的基性辉绿岩（牛岚单元）与中晚奥陶世侵位的超基性金伯利岩（常马庄单元）。经对控制辉绿岩侵位的构造特征进行研究发现,该构造体系不仅控制了鲁西辉绿岩的侵位,还控制了金伯利岩的侵位。在此基础上,对蒙阴金伯利岩带的控制规律进行了分析,并对金伯利岩带向南延伸的区域进行了初步的预测。 相似文献
16.
The diamonds from the Swartruggens dyke swarm are mainly tetrahexahedra, with subsidiary octahedral and cuboid crystals. They are predominantly colourless, with subordinate yellows, browns, and greens. The existence of discrete cores and oscillatory growth structures within the diamonds, together with the recognition of harzburgite, lherzolite, at least two eclogitic and a websteritic diamond paragenesis, variable nitrogen contents, and both Type IaAB and Type Ib–IaA diamonds provides evidence for episodic diamond growth in at least six different environments. The predominance of plastic deformation in the diamonds, the state of nitrogen aggregation, and the suite of inclusion minerals recovered are all consistent with a xenocrystic origin for the diamonds, with the Type Ib–IaA diamonds being much younger than the rest. Mantle storage at a time-averaged temperature of ±1100 °C is inferred for the Type IaAB diamonds. The distribution of mantle xenocrysts of garnet and chromite within the high-grade Main kimberlite dyke compared to the low-grade Changehouse kimberlite dyke strongly suggests that the difference in diamond content is due to an increased eclogitic component of diamonds in the Main kimberlite dyke. 相似文献
17.
Fibrous calcite veins are ubiquitous throughout the thinly bedded, organic-rich Upper Triassic marine mdrocks of the Queen Charlotte Islands and their lateral equivalents on Vancouver Island. These veins show variable and complex morphologies and can be grouped into several types: (a) simple; (b) anastomosing or composite; (c) boxwork; and (4) polygonal network oriented normal to bedding. Field, petrographic, and geochemical evidence suggest that vein opening, resulting from hydraulic fracturing due to elevated pore-fluid pressures, was an early phenomenon and occurred prior to significant compaction of the host sediments.Calcite fibers in the veins are up to 30 mm long and commonly oriented perpendicular to the wall but locally display conical structures. Fibrous calcites, with the exception of those in boxwork veins, are generally non-ferroan and dull to very weakly orange luminescent. The boxwork calcites are ferroan, zoned and show dull luminescence with some bright rims.δ 18O values range from −8.2 to −21.6‰ (PDB) and δ 13C values range from 2.0 to −4.4‰ (PDB). Although some variations are present among the different morphological types of calcite veins, oxygen and carbon isotopic values display important variations when compared geographically. The most depleted oxygen and carbon isotopic values are those of boxwork calcite and they are associated with areas where the effects of early Mesozoic plutonism were most severe. Precipitation of boxwork fibrous calcites is interpreted to have been related to hydrothermal discharge into unconsolidated host sediment, rather than to later burial. Although the hydrothermal influence on the formation of vein calcite is related to geological events specific to the Wrangellia Terrain, this study provides an alternative mechanism for the generation of fibrous calcite veins and demonstrates the local importance of hydrothermal input in the evolution of pore-water chemistry. 相似文献
18.
A breccia vein sampled from a shear zone in greenschist facies metapelites at Mount Isa, Queensland, Australia, shows a systematic variation in vein geometry that is related to the geometry of folding and faulting within the sample. Calcite vein-fill is coarse grained and equigranular, suggesting precipitation in a fluid-filled space. Partially folded veins suggest that veining occurred during folding and faulting. The breccia vein contains a central zone in which dilation has occurred simultaneously in all directions in the plane of section, implying that this was a zone of high fluid pressure and nearly isostatic differential stress during folding and faulting. From these observations, it can be inferred that the breccia vein was a zone of high permeability and a likely fluid channel during deformation. This hypothesis was tested by stable isotope analysis of veins and host rocks. The calcite veins have δ 13C values of -11.1 ± 0.1% and δ 18O values of 6-10% o, whereas the host metapelite has δ 13C values of -10.62 and -10.11% and δ 18O values of 14-15% o. These values are consistent with an igneous-derived, H 2O-dominated fluid that exchanged little oxygen with the host rocks, but derived much of its carbon from the wall rock. The isotopic disequilibrium between the veins and the wall rock confirms that the fluid was externally derived, and that the breccia vein acted as a channel for large-volume fluid flow within the shear zone. 相似文献
19.
Kimberlite sills emplaced in granite located near the town of Wemindji (Quebec, Canada) range from 2 cm to 1.2 m in thickness. The sills exhibit a wide variation in macroscopic appearance from fine-grained aphanitic dolomitic hypabyssal kimberlite to ilmenite/garnet macrocrystal hypabyssal kimberlite. Diatreme or crater facies rocks are not present. Multiple intrusions are present within the sills, and graded bedding and erosional features such as cross-bedding are common. The sills exhibit a wide range in their modal mineralogy with respect to the abundances of spinel, apatite, phlogopite and dolomite. Olivine is the dominant macrocryst, with an average composition of Fo 90. Garnet macrocrysts are low chrome (2–3 wt. %) pyrope (G1/G9 garnet). Ilmenite occurs as rounded macrocrysts (7–13 wt. % MgO). Phlogopite microphenocrysts are Ti-poor and represent a solid solution between phlogopite and kinoshitalite end members. Spinel compositions mainly represent the Cr-poor members of the qandilite–ulvöspinel–magnetite series. The principle carbonate comprising the groundmass is dolomite, with lesser later-forming calcite. Accessory minerals include apatite, Sr-rich calcite, Nb-rich rutile, baddeleyite, monazite-(Ce) and barite. While some of these accessory minerals are atypical of kimberlites in general, it is expected that differentiation products of an evolved carbonate-rich kimberlite magma will crystallize these phases. The Wemindji kimberlites offer insight into the process of crystal fractionation and differentiation in evolved kimberlite magmas. The macroscopic textural features observed in the Wemindji sills are interpreted to represent flow differentiation of a mantle-derived, very fluid, low viscosity carbonate-rich kimberlite. The diverse modes and textural features result entirely from flow differentiation and multiple intrusions of different batches of genetically related kimberlite magma. The mineralogy of the Wemindji kimberlites has some similarities to that of the Wesselton and Benfontein calcite kimberlite sills but differs in detail with respect to dominant carbonate (i.e. dolomite versus calcite), and the character of the rare earth-bearing accessory minerals (i.e. monazite-(Ce) versus rare earth fluorocarbonates). 相似文献
20.
Carbonates in a 30 cm wide zoned kimberlite dyke from the De Beers Mine, Kimberley, S. Africa were studied by cathodoluminescence and electron microprobe techniques and their 87Sr/ 86Sr ratios were measured using an AEI-IM20 ion microprobe. Primary carbonates (including calcite dendrites, rhombohedral calcites in segregation vesicles and mosaic dolomite) have high Sr (0.69–1.35 wt.% SrO) and Ba (0.24–0.44% BaO) and 87Sr/ 86Sr ratios in the range 0.7046 to 0.7056. Secondary sparry calcite in amygdales and veins is characterised by low Ba (<0.05% BaO) and 87Sr/ 86Sr near 0.72. Rhombohedral calcite 0.5 cm from a contact with 2,900 my. old biotite-gneiss has minor element chemistry like that of primary carbonate, but an elevated 87Sr/ 86Sr ratio of 0.7103, possibly indicating crustal contamination in a boundary layer of the kimberlite magma. Amygdale-like segregations of carbonate and/or serpentine originated as gas-cavities and were not formed by liquid immiscibility. They are now filled either by secondary calcite or by minerals precipitated from residual kimberlite liquid. However, dendritic calcite and primary dolomite and calcite with high Sr, Ba and low 87Sr/ 86Sr demonstrate shared chemical characteristics between these carbonates and carbonatite. The primary kimberlite magma had initial 87Sr/ 86Sr close to 0.7046. 相似文献
|
