首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Many tropical residual laterites have relatively poor engineering properties due to the significant percentage of fine-grained soil particles that they contain, which are formed by the soil weathering process. The widespread presence of laterite soils in tropical regions often requires that some form of soil improvement be performed to allow for their use in various civil engineering applications, such as for road base or subbase construction. One of the most commonly utilized stabilization techniques for laterite soils is the application of additives that chemically react with the minerals that are present in soil to enhance its overall strength; effective soil stabilization can allow for the use of site-specific soils, and can consequently result in significant cost savings for a given project. With an increasing focus on the use of more environmentally friendly and sustainable materials in the built and natural environments, there is an emerging interest in eco-friendly additives that are an alternative to traditional chemical stabilizers. The current study examines the viability of xanthan gum as an environmentally friendly stabilizer that can improve the engineering properties of tropical residual laterite soil. Unconfined compressive strength (UCS) tests, standard direct shear tests, Brunauer, Emmett, and Teller (N2-BET) surface area analysis tests and field emission scanning electron microscopy (FESEM) tests were used to investigate the effectiveness of xanthan gum for stabilization of a tropical laterite soil. The UCS test results showed that addition of 1.5% xanthan gum by weight yielded optimum stabilization, increasing the unconfined compressive strength of the laterite soil noticeably. Similarly, direct shear testing of 1.5% xanthan gum stabilized laterite specimens showed increasing Mohr–Coulomb shear strength parameters with increases in curing time. From the FESEM results, it was observed that the stabilization process modified the pore-network morphology of the laterite soil, while also forming new white layers on the surface of the clay particles. Analysis of the test results indicated that xanthan gum stabilization was effective for use on a tropical residual laterite soil, providing an eco-friendly and sustainable alternative to traditional soil stabilization additives such as cement or lime.  相似文献   

2.
Although the effects of nontraditional stabilizers on the geotechnical properties of tropical soils has been the issue of investigation in recent years, the micro-structural characteristics of nontraditional soil additives and in particular selected additive (TX-85) have not been fully studied. Nontraditional soil stabilization additives are widely used for stabilizing marginal materials. These additives are low-cost alternatives to traditional construction materials and have different compositions. They also differ from one another while interacting with soil. In line with that, it was the objective of this research to investigate the strength properties and physicochemical mechanisms related to tropical laterite soil mixed with the liquid stabilizer TX-85. Macro-structure study, i.e., compaction, and unconfined compression strength test were used to assess the engineering and shear properties of the stabilized laterite soil. In addition, the possible mechanisms that contributed to the stabilization process were discussed using various spectroscopic and microscopic techniques such as X-ray diffractometry (XRD), energy-dispersive X-ray spectrometry, scanning electron microscopy, and Fourier transform infrared spectroscopy. From engineering point of view, the results indicated that the strength of TX-85 stabilized laterite soil improved significantly. The degree of improvement was approximately four times stronger than natural soil after a 7-day curing period. The XRD showed no crystalline products (gel form). Moreover, weathering effects were obvious in TX-85 treated samples in most of clay minerals’ peak intensities. These effects were reduced especially for kaolinite mineral inside the soil with curing time.  相似文献   

3.
谈云志  柯睿  陈君廉  吴军  邓永锋 《岩土力学》2020,41(4):1146-1152
淤泥富含有机质，分解后产生腐殖酸，进而影响淤泥固化效果。仅掺入12%水泥固化淤泥，当标准养护期超过60 d，其强度不增反减。联合掺入3%石灰和12%水泥，固化淤泥的pH值持续180 d处于10.5以上；无侧限抗压强度由750 kPa（养护期28 d）提升到1 500 kPa（120 d），说明借助石灰营造强碱性环境，可以提高水泥固化淤泥的强度；但养护到180 d后，其强度又降到1 250 kPa；钙离子浓度变化规律表明，这是由于腐殖酸溶蚀水泥和石灰的水化胶结物所致。借助偏高岭土卓越的火山灰反应能力，掺入3.0%偏高岭土，提升石灰（3%）?水泥（12%）固化淤泥的耐久性，发现180 d养护期内，其强度始终处于增长趋势，究其原因是偏高岭土富含无定形硅、铝氧化物，具有快速捕获氢氧化钙溶液中钙离子的能力，形成稳定的胶结物，而且不易受腐殖酸的侵蚀作用，证明偏高岭土能够有效提升石灰?水泥固化淤泥长期强度。  相似文献   

4.
随季节性变化的冻融循环作用对土体结构有显著的影响。为降低盐渍土对环境温度的敏感性并将其应用于工程中,提出以石灰、粉煤灰和改性聚乙烯醇(MPA)为固化材料的联合固化方法。先通过无侧限抗压强度(UCS)和微观扫描试验评价固化效果,构建固化材料的参数范围,再将抗剪强度(黏聚力和内摩擦角)与正交试验相结合,分析各因素的影响,明确最佳组合参数。结果表明:石灰+粉煤灰+MPA联合固化有助于提高盐渍土的强度,联合固化盐渍土的UCS为1 130.25 kPa,是盐渍土(218 k Pa)的5.18倍;联合固化盐渍土的冻融强度满足工程规范(JTG 3430-2020)要求。冻融循环作用下联合固化盐渍土的UCS稳定值为700k Pa,且3次循环后的波动范围在5%左右。适宜配比下联合固化盐渍土的抗剪强度(黏聚力和内摩擦角)在3次冻融循环后为208.2 kPa和38.56°。各因素的敏感性由高到低依次为养护时间、石灰掺量、MPA掺量、干密度、含盐量和冻融循环次数,随石灰、粉煤灰和MPA掺量的增加,联合固化盐渍土强度增大并趋于稳定,固化参数的优化可有效弱化冻融作用对滨海盐渍土的影响。结合抗压及抗剪强度试验结果,...  相似文献   

5.
Shear Strength Parameters of Improved Peat by Chemical Stabilizer   总被引：4，自引：2，他引：2  
The present research aimed to discuss the applicability of cationic grouts in geotechnical engineering. The effects of several cationic stabilizers such as monovalent (sodium silicate), divalent (calcium oxide and calcium chloride), and trivalent (aluminum hydroxide) were investigated on shear strength improvement of tropical peat samples. The unconfined compressive strength (UCS) tests were performed after the time frame of 7, 21, and 30 days as curing time, respectively. Apart from the physicochemical characteristics of the stabilized peat, scanning electron microscopy and energy-dispersive X-ray spectroscopy tests were also carried out to study the ongoing microstructural changes. It is to be noted that the shear strength values for peat samples rose to 8, 6, 6, and 4 % of sodium silicate, calcium oxide, calcium chloride, and aluminum hydroxide, respectively. The highest observed UCS outcome is the one taken from the calcium oxide where the UCS of treated peat after 30-day curing time increased to 76 kPa. The strength changes resulted from the various cationic stabilizers can best be explained via the consideration within the mineralogical composition as well as those physicochemical changes happening in the peat.  相似文献   

6.
为研究剑麻纤维和高分子固化剂复合改良对砂土工程特性影响,通过一系列三轴剪切试验,对不同掺量和长度的剑麻纤维与高分子固化剂改良砂土的剪切强度特性进行了研究,从峰值偏应力、应力应变曲线特征和抗剪强度参数等方面分别对改良机理进行了研究。研究结果表明,纯高分子固化剂改良砂土的峰值偏应力和黏聚力明显提升,由于固化剂粘结砂土颗粒,限制了变形过程中颗粒的相对滑动,内摩擦角略微降低。随纤维掺量的增加,不同围压下固化剂改良土体的峰值偏应力明显增加,应力硬化特征愈加明显,土体的黏聚力和内摩擦角随纤维掺量的增加保持单调递增趋势。在单纯添加固化剂的情况下,土体强度与固化剂浓度呈正相关的关系;在给定0.4%的纤维含量下,随着纤维长度的加长,纤维和高分子固化剂复合改良砂土的剪切强度先增强后降低;在纤维长度为18 mm时,土体的剪切强度达到最大,黏聚力达到最大207.57 kPa;纤维长度的改变对试样破坏时的轴向应变和土体的内摩擦角基本没有影响。  相似文献   

7.
An expansive tropical black clay (also known as black cotton soil because the cotton plant thrives well on it) was treated with up to 15 % locust bean waste ash (LBWA) to assess its soil improvement potential. Samples were subjected to index, compaction using three energy levels (British Standard light, BSL, West African Standard, WAS or ‘Intermediate’ and British Standard heavy, BSH), shear strength (unconfined compressive strength, UCS), California bearing ratio, CBR and durability tests. Results obtained show that the natural soil is not suitable for road construction. The maximum dry density (MDD) and optimum moisture content (OMC) decreased and increased, respectively. Regardless of the compactive effort and curing period, strength and durability properties increased with higher LBWA content with the BSL effort recording the best improvement. However, based on durability results, the optimal 12.5 % LBWA treatment of black cotton soil did not satisfy criteria for its use in road construction as a stand alone additive. Also, significant improvement in soil properties was obtained using the BSL compactive effort, which is easily achieved in the field. The benefits of the application include reduction in the cost of soil improvement and the adverse environmental impact of locust bean waste.  相似文献   

8.
Clay soil with low-bearing capacities can present great problems underlying pavement and light structures due to uncertainty associated with their performance. This paper describes a sonic based testing methodology for quality control of a surface stabilized soil. From an engineering aspect, an increase in water content has a number of disadvantageous consequences: cohesion decreases, the soil swells, the alternating dry-out/shrinkage and wetting/swelling effects destroy the rock or a soil structure. Cement is mixed into the soil to increase both the strength and the usability of local soils in constructions purposes. This is to overcome the problems by strengthening the soil underlying the structure or diminishing the leads transmitted from the foundation to the soil. The compressive strength of the stabilized soil is highly dependent on the type of soil, moisture content, cement content, and compaction work, and can therefore vary significantly in the field. The authors performed the quality control by measuring the sonic and tensile strength velocity in the stabilized soil that has been correlated to compressive strength in native materials. The improvement of the soil materials by the addition of cement could make the material suitable as filling materials, foundation and/or a road base construction. The quality control for the stabilized soils was investigated using sonic measurements and strength gain. The test methods were performed to evaluate the degree of improvement achieved through the measurement of compression and shear-wave velocities of the soil under study. Scanning electron microscopy and electron dispersive X-ray analyses were performed on raw and laboratory treated for qualitative understanding the strength minerals formed during stabilization. The sonic test showed a considerable improvement with curing time and percentages of stabilizer. Mineralogical studies indicated the formation of silica and alumina hydrates along with interwoven structure of cement treated clay particles suggesting adequate mixing of the soil and binder owing to the strength of the soil materials.  相似文献   

9.
为了研究粉煤灰和二灰掺量及养护时间对桂林红黏土的改良效果,进行了直剪试验、固结试验以及电镜扫描试验。试验结果表明,粉煤灰的掺入提高了红黏土的抗剪强度,但超过一定量（18%粉煤灰掺量）反而会降低红黏土黏聚力,各掺量粉煤灰红黏土随养护龄期的延长,抗剪强度呈先增后缓趋势。二灰改良红黏土,在早期强度剧增,且强度随养护时间增长而大幅增加,一定龄期内,二灰红黏土黏聚力随二灰掺量呈先增后减趋势。粉煤灰和二灰的掺入均增大了红黏土的压缩模量,且随养护时间的延长而逐渐增大。红黏土中随粉煤灰、石灰的加入,发生一系列物理化学反应,从微观结构分析得知土中孔隙减少,结构性较素红黏土好。  相似文献   

10.
In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.  相似文献   

11.
The changes in the shrinkage and physicochemical properties of untreated and treated organic soil using several chemical additives were investigated. In order to evaluate the effect of each chemical solution on the peaty soil environment different experiments namely; shrinkage limit, unconfined compressive strength (UCS), pH test, and water content were undertaken. The results of the laboratory experiments are further proved and interpreted using the X-ray diffraction, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy tests. The result unveils the structure of the treated soil significantly changed depending upon the used additive type and concentrations. The rate of shrinkage largely decreased when sodium silicate additives are used. In addition, it was observed that UCS value increased up to 500% and water content reduced up to 50% in comparison with untreated samples, depend on the amount of used non-traditional additives. The SEM micrographs of the sample before and after treatment validate the results obtained and analyzed from experiments.  相似文献   

12.
为研究超细水泥含量对水泥固化软土的早期力学性能的影响,本文通过在普通水泥中加入不同掺量的超细水泥组成复合水泥固化剂用以固化软土。具体研究不同超细水泥掺量、不同初始含水率、及不同养护围压条件下,复合水泥固化剂对固化软土早期抗压强度及刚度的影响。采用自制K0围压养护装置(施加不同轴向压力的方式)、无侧限抗压强度仪(UCS)、X射线衍射仪(XRD)、电镜扫描仪(SEM)和低场核磁共振孔隙测试仪(NMR)等试验手段获取复合水泥固化软土不同龄期的抗压强度、刚度及微观结构的变化规律,并揭示其固化机理。研究结果表明:(1)相同轴向压力作用下,随着超细水泥掺量的增加,固化软土的抗压强度和弹性模量均有提高,其中复合固化剂中的活性颗粒发生水化反应生成大量胶凝产物用以黏聚土颗粒和填充孔隙,惰性颗粒用于填充土颗粒间的孔隙;(2)随着含水率的提高,固化软土中孔相对发育,从而使固化软土结构致密性减弱,抗压强度降低;(3)在K0围压养护7d时,固化软土的抗压强度和弹性模量随着轴向压力的提高而增加,表明养护围压对软土颗粒的压缩作用能提高固化软土的密实性,同时围压对固化软土产生有效应力,与水化产物共同促进固化软土形成密实的土骨架,进而使其在7d内具有较高的抗压强度。基于试验结果,建立轴向压力、含水率和超细水泥掺量等多因素的固化软土强度预测公式,并提出复合水泥固化软土结构模型,为工程实践提供理论基础。  相似文献   

13.
In this study, the effects of cement kiln dust (CKD) on the swelling properties, strength properties, and microstructures of CKD-stabilized expansive soil were investigated. Samples were prepared and stabilized with different CKD content ratios, ranging from 0 to 18% by dry mass. The results obtained show that the maximum swelling pressures decrease exponentially with increases in CKD content. Both the cohesion and unconfined compressive strength (UCS) increase at ratios below 10% CKD and then decrease slightly, above that ratio. CKD can also improve the strength of saturated, expansive soil. There is no visible change of UCS for soil without CKD when cured, while the UCS of a sample with 10% CKD content after curing for 90 days is higher than that after curing for only 1 day. This indicates that CKD can improve the long-term strength of expansive soil. Finally, microstructure analysis reveals that the addition of CKD reduces the montmorillonite content of expansive soil and decreases its swelling properties. The addition of CKD also changes the pore volume distribution, both the size and amount of macro-pores and micro-pores decrease with increase in CKD content. For saturated samples, the size of macro-pores is obviously reduced, while that of micro-pores is slightly increased for both treated and untreated soils. Hydration and saturation processes make the soil structure become dispersive which results in a lower strength, and adding CKD can restrain this process. The suggested optimal CKD content is between 10 and 14% and with a curing time of more than 27 days.  相似文献   

14.
为了研究绿色环保新型流态固化土在狭窄肥槽回填等工程问题中的应用,提出稻壳灰联合地聚物固化工程渣土形成流态稻壳灰-地聚物固化土。采用无侧限抗压强度（UCS）试验、X射线衍射(XRD)、扫描电子显微镜(SEM)和X射线能谱分析（EDS）等测试方法,研究稻壳灰的掺量与粒径对稻壳灰-地聚物固化土的无侧限抗压强度（UCS）的影响规律,并探讨了稻壳灰掺量与粒径对其微观结构影响规律。结果表明:稻壳灰-地聚物固化土的净浆流动度与稻壳灰的掺量、粒径呈负相关关系,其凝结时间与稻壳灰掺量呈正相关关系,但与稻壳灰的粒径呈负相关关系;稻壳灰-地聚物固化土UCS值随着稻壳灰的掺量增加、粒径降低而显著提高,当稻壳灰的掺量增加到10%后,强度提升效能降低,初步判定稻壳灰的最优掺量为10%;固化过程中产生水化硅铝酸钠（N-A-S-H）和水化硅酸钙（C-S-H）2种凝胶,起到填充内部孔隙和胶结土颗粒的作用,使整体结构趋于完整,是稻壳灰-地聚物固化土强度提升的根本原因。研究成果可为稻壳灰在流态固化土的工程应用提供理论依据。  相似文献   

15.
In this study, the effect of ground granulated blast furnace slag (GGBFS) and recycled construction waste (CW) on bentonite clay stabilisation were investigated. The unconfined compressive strength (UCS) of specimens was evaluated with different combinations of GGBFS and CW over various curing periods. A series of micro analysis tests consisting of scanning electron microscope, energy dispersive spectrometer and X-ray diffraction were also conducted to determine the microstructural arrangement and mineralogical effect of the stabilisation treatment. The UCS results showed an increment in strength after introduction of GGBFS and CW and the longer curing period produced more pronounced results. The optimum additive ratio was calculated as 5 % of slag and 20 % of construction waste under all curing conditions. The micro analytical results also indicated formation of structural bonds between admixtures and bentonite in stabilised specimens, as slag crystals and bentonite particles were observed to occupy the cavities and vesicles on the construction waste grains. However, the experimental data shows that the strength improvement is not significant with the addition of only construction waste.  相似文献   

16.
Stabilization of fuel oil contaminated soil—A case study   总被引：1，自引：0，他引：1  
Fuel oil contamination brings adverse effect on basic geotechnical properties of foundation soil. The present study pertains to one such case, from the petrochemical complex near Vadodara City in Gujarat State, India. Here, the fuel oil contaminated soil samples exhibit drastic changes in their geotechnical parameters. Noteworthy among such deleterious changes are: decrease in maximum dry density (–4%), cohesion (–66%), angle of internal friction (–23%) and unconfined compressive strength (UCS) (–35%) and increase in liquid limit (+11%). An attempt has been made to stabilize the contaminated soil using various additives viz., lime, fly ash and cement independently as well as an admixture of different combinations. It is apparent from the test results that the stabilization agents improved the geo-technical properties of the soil by way of cation exchange, agglomeration, and pozzuolanic actions. The best results were observed when a combination of 10% lime, 5% fly ash and 5% cement was added to the contaminated soil. The improvement in unconfined compressive strength (UCS), cohesion and angle of internal friction can be attributed to neo-formations such as Calcium Silicate Hydrates (CSH, CSH-1) that coats and binds the soil particles. Formation of stable complex between oil and metallic cations, results in reduction of leachableoil.  相似文献   

17.
针对不同养护龄期对于粉煤灰水泥土抗剪强度影响的问题,采用不固结不排水三轴剪切试验从宏观力学的角度分析养护龄期对粉煤灰水泥土的影响,结合SEM试验和XRD试验从微观角度分析试样内部结构与物质成分。试验结果表明:从宏观角度分析,粉煤灰水泥土的应力-应变曲线呈现应变软化型,试样的抗剪强度随养护龄期的增加逐渐增大且28 d的抗剪强度最大,同时,由于试样内部各物质之间的反应随养护龄期的增加而持续进行,龄期越长试样内部各物质之间的胶结作用越强,致使试样的内摩擦角和黏聚力随养护龄期逐渐增大;从微观角度分析,试样内部生成的结晶物质(钙矾石)与胶凝物质(C-S-H凝胶)等填充试样内部的大孔隙且相互黏结,导致试样愈加密实,抗剪强度增大。本文旨在为粉煤灰等材料固化黄土的抗剪强度提供试验依据,为粉煤灰等工业副产品在工程中的应用提供参考,对粉煤灰的利用和环境保护具有参考意义。  相似文献   

18.
水泥土固化过程中Ca2+浓度会随水化反应的进行而逐步降低,导致水泥颗粒未完全水化,固化土强度增长受限,而水泥基渗透结晶型防水材料（CCCW）中活性物质能催化未水化水泥颗粒反应。选择硫铝酸盐水泥（SAC）为胶凝材料、CCCW为添加剂,通过单掺与复掺的方式,结合X射线衍射（XRD）、电镜扫描（SEM）表征,分析了固化土的无侧限抗压强度、水稳定性、耐干湿循环性能及微观结构。结果表明,复掺16%混合料（4%CCCW+12%SAC）的固化土强度是同掺量下单掺SAC固化土强度的1.5倍,且比单掺20%SAC的固化土强度高1.41 MPa;复掺16%混合料（4%CCCW+12%SAC）的固化土泡水2～8 d软化系数平均达0.97,而同掺量下SAC固化土平均仅为0.73;单掺的固化土强度随干湿循环次数增加逐级降低,而复掺混合料的固化土强度呈波浪式发展;CCCW中活性物质能增加固化土中钙矾石生成量并修复微裂缝,钙矾石长径比显著增大,可直接连接两个甚至多个土颗粒,形成三维网状结构,显著提高结晶体的微观加筋、骨架及填充作用,改善SAC固化土强度、水稳定性及耐干湿循环性能。  相似文献   

19.
红黏土水敏性强,添加石灰等碱性材料处治后,能获得即刻的改良效果,但由于红黏土呈弱酸性,石灰改良后其长期性能会衰减。为提高石灰稳定红黏土（简称La+L）的长期性能,添加偏高岭土（4%）协同石灰（5%）稳定红黏土（简称La+L+MK）,改善其水敏性和酸?碱互损作用。制备8种初始含水率的压实试样（初始孔隙比相同）,养护到预定时间后开展无侧限抗压强度试验,同时,测定试样的钙离子浓度、电导率和pH值。结果表明：初始含水率为26%左右时,改良土的无侧限抗压强度最高,初始含水率偏高或偏低都不利于改良土的强度增长。究其原因,试样偏干时,缺少水分,石灰水化不充分,不能形成游离态钙离子,无法进行火山灰反应,颗粒之间无法形成胶结;试样偏湿时,火山灰反应形成的胶结强度不及过量水分引起的基质吸力丧失量。试样的钙离子浓度和电导率变化规律,证实了以上原因解释的猜想。当然,添加偏高岭土后,能够显著改善偏湿状态下的石灰土强度。即使浸水饱和后,相对石灰改良土,也能够保持较高的强度,充分证明偏高岭土能够有效降低石灰土水敏性,提高其耐久性。偏高岭土直接提供了大量硅、铝氧化物,且将土体pH值降到有利于硅、铝氧化物溶解的碱性范围,加速火山灰反应,缓减或抑制石灰?红黏土的互损作用。  相似文献   

20.
The effect of sulphates on the soil stabilisation using mineral additives such as lime, cement and fly ash has been reported by several researchers. The effect of sodium sulphate (Na2SO4) (0–6% by dry weight of soil) on the behaviour of the grey clayey soil (GS) and red clayey soil (RS) stabilised with lime (L) (0–8%), natural pozzolana (NP) (0–20%) and with a combination of lime-natural pozzolana (L–NP) was investigated. The soil specimens were subjected to testing of direct shear strength after 7, 30, 60 and 120 days of curing period. In the absence of Na2SO4, the results show that both clayey soils can be successfully stabilised with L or with a combination of L–NP, which substantially increases their shear strength and produces high values of shear parameters. However, at short curing period and for any content of Na2SO4, a further increase in shear strength and shear parameters is observed. Moreover, after 30 days of curing, the RS specimens stabilised with L or with NP alone are altered when the Na2SO4 is greater than 2%, whereas the GS specimens are not altered. However, the alteration of RS specimens is little when the L and NP are combined on curing with a high content of Na2SO4. Generally, the effect of Na2SO4 on both stabilised clayey soils depends on the curing time, percentage of additives used and their type, mineralogical composition of stabilised soils and Na2SO4 content.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号