共查询到20条相似文献，搜索用时 375 毫秒
1.
《海洋科学集刊》2016,(0)
温盐深测量仪(CTD)是目前国际上应用最为广泛的物理海洋调查仪器设备之一。2014年,中国科学院海洋研究所在黄海布放的潜标上搭载了3种不同型号的CTD(37Coastal、CTD48和304Plus),本文分别对这3种CTD所获取的数据资料进行了对比分析。三者数据两两对比结果显示,37Coastal与CTD48压力及温度数据最为接近,盐度数据则为37Coastal与304Plus相差最小。3种设备的压力、温度及电导率数据稳定性对比结果如下:37Coastal压力数据稳定性表现最好;三者温度数据稳定性表现一致;而37Coastal盐度数据稳定性和CTD48一致。三种设备均能适应海洋真实的物理环境参数变化观测,同时各自有其不同的使用环境,对于不同海域环境使用需要进行详细评估,综合各个方面的因素确定最终适合自身科学研究需求的方案。 相似文献
2.
走航式海洋多参数剖面测量系统(MVP)是一种集成程度和自动化程度都较高的海洋调查设备,能对多要素进行同时观测,获得高水平空间分辨率的数据资料。MVP由于温度和电导率传感器响应时间的不匹配,下放速度过快(峰值速度4m/s)而造成非常严重的盐度尖峰现象。本研究通过结合F法、GM法和Grose法提出的盐度尖峰订正方案,提出了一种新的方法Match conductivity and temperature response times法,对压力、温度和电导率传感器三者进行响应时间的匹配来减弱盐度尖峰。与SBE-9型CTD资料进行对比发现订正后的资料误差比订正前减小80%,与CTD盐度曲线互相关程度为0.917。对比35N断面修正前后的盐度资料发现订正后温盐跃层处出现的低盐区域消失,与CTD断面资料对比结果显示MVP资料比CTD资料在细结构上更具有优势。 相似文献
3.
基于目前国内海洋仪器的现状,为了对国产温盐深剖面仪(Conductivity-Temperature-Depth profiler,CTD)的性能和实际使用情况有个量化的结果,在我国南海东北部海域对国内较为成熟且具备产品化条件的两型国产CTD开展第三方独立检验与验证。比测过程中,采用同架捆绑,同步下放的方法进行测量。数据处理时,采用一种简便的移相相关法,对国产CTD的压力(P)、温度(T)、电导率(C)、盐度(S)与标准CTD进行对比分析。试验结果表明两者数据曲线趋势一致,线形基本吻合,参试的国产CTD基本上达到自身产品标称精度,但低于标准CTD精度。本次比测结果有利于促进技术成果的完善与固化,有利于进一步提高设备的可靠性、稳定性和批量一致性,为国产海洋环境监测设备的规模化应用和推广提供数据支撑。 相似文献
4.
水下滑翔机可以高效地观测海水的温度、盐度和压强等海洋参数,但由于热滞后效应,盐度数据,特别是在温度梯度较大的温跃层,会出现一定程度的偏差。本研究选取了3种目前常用的盐度热滞后订正方法,对带泵的“海翼号”水下滑翔机,于2019年8月在中北太平洋所观测的盐度数据因热滞后效应引起的偏差进行订正处理,与船载911型温盐深测量仪(Instrument for Measuring Conductivity Temperature and Depth,CTD)观测盐度进行对比,在比较了3种方法对滑翔机盐度订正前后下降和上升剖面偏差的减少程度、订正后剖面与船载CTD观测剖面的偏差大小和下降上升温盐曲线(T-S曲线)的一致程度后,得出了水下滑翔机盐度订正的最优方法,即在订正电导池中实际温度的前提下,采用计算机图形分割方法,最小化滑翔机机载CTD测得的下降和上升两个剖面T-S曲线围成面积所确定的目标函数,来确定合适的热滞后修正振幅和时间常数,从而修正下降和上升两个剖面之间盐度偏差。 相似文献
5.
CTD是测量海水温度、电导率和压力的仪器,在海洋科学考察、海洋资源调查开发、海洋环境监测预报和海洋军事研究中应用广泛。SZC15-4型多参数CTD是国产SZC15系列CTD最新型号,用于测量海水的温度、电导率、深度和叶绿素浓度,适用于近岸海洋调查。文中介绍了SZC15-4型多参数CTD剖面仪的性能、工作原理、系统组成和工作流程。并通过海上试验,与SBE19CTD在相同环境条件、相同采样速率下作比测,通过对实验数据做相关运算得出SZC15-4型CTD与SBE19在温度、盐度相关性优于0.999 9,表明两种仪器具有很高的相关特性。 相似文献
6.
走航式海洋多参数剖面测量系统(moving vessel profiler,MVP)是一种集成程度和自动化程度都较高的海洋调查设备,能对海洋多要素进行同时观测,获得水平方向的高分辨率数据资料。由于温度和电导率传感器响应时间的不匹配,MVP下放速度过快(峰值速度4 m/s)而造成非常明显的盐度尖峰现象。本研究结合Fofonoff(F)法、时间常数指数递归数字滤波(Giles and McDougall,GM)法和Grose提出的盐度尖峰订正方案,提出了一种新的方法,即MCT(match conductivity and temperature response time)法,通过对压力、温度和电导率传感器进行响应时间的匹配来减弱盐度尖峰。将SBE-9型CTD资料作为标准,发现订正后的资料与CTD盐度曲线的互相关系数为0.917,误差比订正前减小80%。对比35°N断面修正前后的盐度资料,订正后温盐跃层处出现的低盐区域消失。MVP的应用比常规海洋调查仪器CTD对于海洋现象的观测更有优势。 相似文献
7.
为满足水下滑翔器连续获取海洋剖面水文动力高质量数据的应用需求,利用自主研制的电磁感应式电导率传感器,集成快速响应的热敏电阻与压力传感器,以PIC18F2520单片机为电路系统的核心控制器,设计出一种适用于水下滑翔器搭载的微型化、低功耗、重量轻的SZQ1-1新型CTD传感器。该CTD测量仪经实验室多次标定,数据质量达到海试要求。2016年10月,该CTD传感器与海鸟SBE19 Plus在青岛胶州湾进行了海试比测。海试结果证明,该CTD传感器与SBE19 Plus测量结果相近,实时获取的温、盐、深剖面数据精度满足水下滑翔器的搭载要求。 相似文献
8.
数据集整体的时空覆盖率制约了海洋科学研究的时空尺度,而海洋仪器的性能和观测方式直接决定了海洋数据的可靠性。以观测仪器作为主要衡量指标,结合数据集的时空覆盖率,对以温度和盐度为数据集主体的自持式拉格朗日环流剖面观测(Argo)数据集、全球温盐剖面数据集(GTSPP)、世界海洋数据集(WOD)进行分析和比对,确定了三者关系:Argo和GTSPP都是WOD的数据源,而GTSPP中包含了Argo实时数据的80%。在此基础上研究确定了目前温盐数据的主要观测仪器为Argo浮标、XBT和CTD,并对这三种仪器的误差来源和量级进行详细分析:由于全球自动观测与传输需求,Argo数据存在电子信号不稳定导致的随机误差,而且在高纬度强温跃层地带出现较强的虚假盐度尖峰,再是自由漂移的特性导致1%~2%盐度剖面漂移超过0.02 PSS-78;由于下降方程的不断演变,全球半数XBT数据提供者并未提供仪器型号,导致数据整体的可靠性下降;由于CTD基本采用船载观测,因此成本高、共享数据少且多集中近海。因此在对全球温盐数据进行应用时,应综合考虑观测仪器的可靠性和时空覆盖率,有效实现对资料本身误差和真实海洋现象的甄别。 相似文献
9.
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.