共查询到20条相似文献，搜索用时 31 毫秒
1.
An analytical solution to the two-dimensional wave propagation in fluid-saturated half-space subjected to a strip load with vertical harmonic oscillation at the surface is presented. The basic equations have been derived on the basis of Biot's linear theory of poro-elasticity and then solved using Fourier complex transform for the horizontal direction. The importance of a number of soil characteristics including compressibility, degree of saturation and soil permeability has been examined. It is shown that the effect of pore fluid is dominant only for fully saturated soils with incompressible solid grains and low permeability. For partially saturated, compressible or very permeable soils, the stresses would be mainly transferred to solid part and there will be considerable reduction in pore pressure amplitude. 相似文献
2.
《Computers and Geotechnics》1987,4(1):21-42
A solution method is presented for the consolidation of a saturated, porous elastic half space due to the pumping of a pore fluid at a constant rate from a point sink embedded beneath the surface. It is assumed that the saturated medium is homogeneous and isotropic with respect to both its elastic and flow properties. The soil skeleton is modelled as an isotropic, linear elastic solid obeying Hooke's Law while the pore fluid is assumed to be compressible with its flow governed by Darcy's Law. The solution has been evaluated for a soil with a value of Poisson's ration of 0.25 and for a number of different cases of pore fluid compressibility. It is demonstrated that this compressibility can have a significant influence on the rate of consolidation around the sink. The solutions presented may have application in practical problems such as the extraction of groundwater and other fluids from compressible geological media. 相似文献
3.
This paper presents numerical simulations of Cone Penetration Test (CPT) in water-saturated soft soils taking into account pore pressure dissipation during installation. Besides modelling interaction between soil skeleton and pore fluid, the problem involves large soil deformations in the vicinity of the penetrometer, soil–structure interaction, and complex non-linear response of soil. This makes such simulations challenging. Depending on the soil’s permeability and compressibility, undrained, partially drained or drained conditions might occur. Partially drained conditions are commonly encountered in soils such as silts and sand–clay mixtures. However, this is often neglected in CPT interpretation, which may lead to inaccurate estimates of soil properties. This paper aims at improving the understanding of the penetration process in different drainage conditions through advanced numerical analyses. A two-phase Material Point Method is applied to simulate large soil deformations and generation and dissipation of excess pore pressures during penetration. The constitutive behaviour of soil is modelled with the Modified Cam Clay model. Numerical results are compared with experimental data showing good agreement. 相似文献
4.
The theoretical aspects of fully coupled thermohydromechanical behaviour of saturated porous media are presented. The non-linear behaviour of soil skeleton is assumed. A new concept called ‘thermal void ratio state surface’ is introduced to include thermal effects, and the stress state level influence on volume changes. The fluid phase flows according to Darcy's law and energy transport is assumed to follow Fourier's law classically. Variation of water permeability, water and solid unit weight due to thermal effects and pore pressure changes are included. A finite element package is developed based on final matrix form obtained from discretization of integral form of field equations by finite element method and integration in time. A very good agreement between the theoretical predictions and the experimental results was obtained for the several simple problems proposed by other authors. © 1997 by John Wiley & Sons, Ltd. 相似文献
5.
The disturbance of a clay mass, due to either the installation of a driven pile or the expansion of a pressuremeter membrane, is often modelled as a cylindrical cavity expansion. In addition, it is usual (and convenient) to assume that the expansion occurs under conditions of plane strain. For this problem a method of analysis is presented which considers the soil to be a saturated two-phase material with a pore fluid which flows according to Darcy's Law. Non-linearity in material behaviour is permitted as long as the effective stress–strain law can be written in an incremental or rate form. The use of a consolidation analysis allows the changes in effective stress and pore pressure to be determined at any stage during both the cavity expansion and the subsequent period of reconsolidation. Expansions may occur at any prescribed rate, including the very fast (undrained) and the very slow (fully drained) case. The technique is illustrated by considering the expansion of a cavity in two different types of elastoplastic soil. It is shown how these solutions may be used to model the disturbance of the soil due to pile driving. 相似文献
6.
The porosity of soils is considered to be a directional measure and its distribution is characterized by a functional form. This form has been used to extend the critical state soil mechanics framework to include the effects of structure in soils. A new internal plastic energy dissipation formulation has been proposed to account for fabric arrangement. New expressions for the yield locus, and the plastic stress–strain response of structural soils have been derived. The applicability of the concepts to model the plastic stress–strain behaviour of a number of soils is illustrated. The advantage of the new model is very well identified in modelling the stress–strain behaviour of K0 consolidated and natural clays. © 1998 John Wiley & Sons, Ltd. 相似文献
7.
Numerical study of the deformation of saturated soil in the vicinity of a vibrating pile 总被引：1，自引：1，他引：0
The paper presents a dynamic finite-element analysis of the deformation of saturated cohesionless soil in the vicinity of the toe of a vibrating cylindrical pile. The soil behaviour is described by a hypoplastic constitutive model with intergranular strain assuming locally undrained conditions for the pore fluid. Emphasis is placed on the detailed analysis of stresses and displacements in the soil. It is shown that, starting from a homogeneous stress state, the first several cycles of vibration lead to the formation of a permanent liquefaction zone with vanishing effective stresses at a certain distance from the pile. The displacement field reveals an accumulation of residual displacements in the soil in the form of rotation. The influence of the initial stress state, the pore fluid compressibility, the pile displacement amplitude and the soil density on the formation of a liquefaction zone, on the stress amplitude in the soil and on the intensity of the permanent rotation is investigated. 相似文献
8.
The purpose of the present paper is to clarify the effects of permeability and initial heterogeneity on the strain localization of fluid‐saturated cohesive soil modelled by a strain gradient‐dependent poro‐viscoplastic constitutive model. The effects of permeability and gradient parameters on the growth rate of the fluctuation were obtained by a linear instability analysis. Deformation behaviour of clay specimens modelled as a viscoplastic model with a second order strain gradient during shear was numerically analysed by a soil–water coupled FEM under both globally undrained and partially drained conditions. It was found that the deformation pattern and the stress–strain curve greatly depend on the permeability, the drainage conditions and the initial non‐homogeneous properties. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
9.
进一步阐明了多相介质力学分析的相间相互作用原理.应用相间相互作用原理重新推导了饱和土壤和非饱和土壤水分运动的控制方程,使两者具有统一的表达形式和理论基础.说明了达西定律的物理意义,在此基础上给出了非饱和土壤导水系数与饱和土壤渗透系数之间关系的表达式,该表达式在饱和条件下退化为饱和土的渗透系数.引用大连地区亚粘土和硅微粉在非饱和稳态渗流条件下的渗透试验结果验证了导水系数和饱和土的渗透系数之间的关系. 相似文献
10.
Fully coupled, porous solid–fluid formulation, implementation and related modeling and simulation issues are presented in this work. To this end, coupled dynamic field equations with u?p?U formulation are used to simulate pore fluid and soil skeleton (elastic–plastic porous solid) responses. Present formulation allows, among other features, for water accelerations to be taken into account. This proves to be useful in modeling dynamic interaction of media of different stiffnesses (as in soil–foundation–structure interaction). Fluid compressibility is also explicitly taken into account, thus allowing excursions into modeling of limited cases of non‐saturated porous media. In addition to these features, present formulation and implementation models in a realistic way the physical damping, which dissipates energy. In particular, the velocity proportional damping is appropriately modeled and simulated by taking into account the interaction of pore fluid and solid skeleton. Similarly, the displacement proportional damping is physically modeled through elastic–plastic processes in soil skeleton. An advanced material model for sand is used in present work and is discussed at some length. Also explored in this paper are the verification and validation issues related to fully coupled modeling and simulations of porous media. Illustrative examples describing the dynamical behavior of porous media (saturated soils) are presented. The verified and validated methods and material models are used to predict the behavior of level and sloping grounds subjected to seismic shaking. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
11.
假定土体在固结过程中压缩性和渗透性的变化成正比,基于 - 及 - 关系,推导出饱和软土成层地基一维非线性固结解析解,分别给出了按沉降定义和按有效应力定义的每层土平均固结度及整个土层总固结度的计算公式。采用Fortran语言编制了相应的计算程序,将计算得到的结果与已有双层地基一维非线性固结解析解计算结果进行比较,验证该解析解的正确性。利用该程序分析成层地基一维非线性固结性状,分别讨论了初始竖向渗透系数、初始体积压缩系数、荷载值及土层厚度对地基固结性状的影响。分析结果表明：在成层地基一维非线性固结过程中,初始竖向渗透系数对超静孔压的影响较为复杂,对上下层地基固结速率影响不同;初始体积压缩系数增大,超静孔压增大,固结速率变小;所加荷载值越大,超静孔压消散越慢,固结发展越慢;超静孔压消散速率不仅取决于土层厚度,同时取决于各层土渗透性的相对大小。 相似文献
12.
A new constitutive formulation for simulating the behaviour of nearly saturated sands under seismic loads is presented. The formulation is based on combining the Henry's law for dissolution of gas in water, the ideal or perfect gas law and the law of conservation of mass. The effects of transient air dissolution in water on the compressibility of partially saturated soils are also taken into account. The model was calibrated based on numerical simulations of isotropically consolidated cyclic triaxial tests conducted on partially saturated samples of Toyoura sand. A multi‐yield plasticity soil constitutive model implemented in the finite element code DYNAFLOW was used for these numerical simulations. It is shown that the formulation proposed here is able to reasonably predict the soil cyclic undrained behaviour at various degrees of saturation (95% and higher). Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
13.
A finite element model is developed for modelling coupled fluid expulsion/deformation behaviour of dewatering sediments subjected to external loadings under isothermal conditions. The non-linear deformation behaviour of the sediment (soil) skeleton is based on the force equilibrium equation in which the constitutive relationship of stress and strain is implemented by the modified Cam-Clay model in soil plasticity. The fluid flow behaviour in the model is described by the generalized porous media flow equation. The model allows temporal and spatial variations of porosity and permeability. The fluid viscosity and density are assumed to be temperature-dependent. The model also allows the development of single and multiple faults, depending upon the material (sediment and fluid) properties, loading and boundary conditions. Procedures are implemented for (1) updating the material properties such as porosity, permeability, fluid density and viscosity and (2) the development of faults which allow the formation of high-permeability conduits for fluid flow. The solution algorithm for displacements of the sediments and the excess pore (fluid) pressure is based on a residual load technique to handle the non-linear (elastic-plastic) deformation behaviour of the sediment skeleton. The model can be applied to one- and two-dimensional problems. Examples of a plane strain saturated sediment layer subjected to stepwise horizontal tractions versus time are given. 相似文献
14.
The development of a numerical procedure for the finite element analysis of anchors dynamically penetrating into saturated soils is outlined, highlighting its unique features and capabilities. The mechanical behaviour of saturated porous media is predicted using mixture theory. An algorithm is developed for frictional contact in terms of effective normal stress. The contact formulation is based on a mortar segment-to-segment scheme, which considers the interpolation functions of the contact elements to be of order N, thus overcoming a numerical deficiency of the so-called node-to-segment (NTS) contact algorithm. The nonlinear behaviour of the solid constituent is captured by the Modified Cam Clay soil model. The soil constitutive model is also adapted so as to incorporate the dependence of clay strength on strain rate. An appropriate energy-absorbing boundary is used to eliminate possible wave reflections from the artificial mesh boundaries. To illustrate the use of the proposed computational scheme, simulations of dynamically penetrating anchors are conducted. Results are presented and discussed for the installation phase followed by ‘setup’, i.e., pore pressure dissipation and soil consolidation. The results, in particular, reveal the effects of strain rate on the generation of excess pore pressure, bearing resistance and frictional forces. The setup analyses also illustrate the pattern in which pore pressures are dissipated within the soil domain after installation. Hole closure behind a dynamic projectile is also illustrated by an example. 相似文献
15.
In the last decades, a number of hydro-mechanical elastoplastic constitutive models for unsaturated soils have been proposed. Those models couple the hydraulic and mechanical behaviour of unsaturated soils, and take into account the effects of the degree of saturation on the stress–strain behaviour and the effects of deformation on the soil–water characteristic response with a simple reversible part for the hysteresis. In addition, the influence of the suction on the stress–strain behaviour is considered. However, until now, few models predict the stress–strain and soil–water characteristic responses of unsaturated soils in a fully three-dimensional Finite Element code. This paper presents the predictions of an unsaturated soil model in a Three-dimensional Framework, and develops a study on the effect of partial saturation on the stability of shallow foundation resting on unsaturated silty soil. Qualitative predictions of the constitutive model show that incorporating a special formulation for the effective stress into an elastoplastic coupled hydro-mechanical model opens a full range of possibilities in modelling unsaturated soil behaviour. 相似文献
16.
Deformation of a poroelastic layer overlying an elastic half‐space due to dip‐slip faulting 
下载免费PDF全文
下载免费PDF全文 An analytical solution of the plane strain problem of the deformation of a homogeneous, isotropic, poroelastic layer of uniform thickness overlying a homogeneous, isotropic, elastic half‐space due to two‐dimensional seismic sources buried in the elastic half‐space has been obtained. The integral expressions for the displacements, stresses and pore pressure have been obtained using the stress function approach by applying suitable boundary conditions at the free surface and the interface. The solution obtained is in the Laplace–Fourier transform domain. The case of a vertical dip‐slip line dislocation for the oceanic crust model of Earth is studied in detail. Schapery's formula is used for the Laplace inversion and the extended Simpson's formula for the Fourier inversion. Diffusion of pore pressure in the layer is studied numerically. Contour maps showing the pore pressure in the poroelastic layer have been plotted. The effect of the compressibility of the solid and fluid constituents on pore pressure has also been studied. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
17.
The stress–strain behaviour of a soil is crucial to the recognition of the mechanism of slope failure. Triaxial tests, composed of isotropically consolidated drained (ICD) and undrained compression (ICU) tests and anisotropically consolidated constant deviatoric stress path (CQD) tests, were carried out with the aim of investigating the stress–strain behaviour of loosely compacted volcanic-derived soils. The fact that the critical states are the same for ICU, ICD and CQD tests may show that the critical state is independent of the above three stress paths. The critical state line, as defined in critical state soil mechanics, is obtained from the e–log p′ and q–p′ plots based on the results of the above tests. The initial state of the consolidated specimens at initiation of failure may be classified as dilative or contractive in the light of the locations of the soil state relative to the critical state line. For contractional soils, the increased pore water pressure generated by rainfall infiltration leads to a contractive failure in a drained manner, giving rise to high excess pore water pressure. The excess pore water pressure caused by contraction cannot be dissipated instantly, resulting in a decrease in the shear resistance of the soil. The failure process is rapid. The failed soil mass is prone to flow after failure under the action of gravity due to its high moisture content and inflow of surface runoff and rainwater. For dilational soils, the increased pore water pressure resulting from infiltration leads to dilation, which reduces pore water pressure and thus increases the shear resistance of the soil. However, continued rainfall infiltration may be able to equilibrate the reduction in pore water pressure caused by dilation and, therefore, the dilation or displacement can continue. In Hong Kong, volcanic-derived soil is characterized by high permeability. Both the high permeability of volcanic-derived soil and a shallow failure surface make it possible for the reduction in pore pressure to equilibrate relatively quickly. Therefore, the failure is also rapid, at least for poorly compacted fill slopes. 相似文献
18.
Many pieces of evidence have confirmed that the seepage in fine-grained soils can deviate from traditional Darcy's law that contributes to the consolidation theory. In this paper, a numerical model, referred to as consolidation with non-Darcian flow 2 (CNDF2), is developed for the 1D large strain consolidation of a saturated porous medium with the non-Darcian flow. The algorithm accounts for vertical strain, general constitutive relationships, the relative velocity of the fluid and solid phases, variable compressibility and permeability relation during consolidation, time-dependent loading, and unload/reload effects. Compared with the CS2 model proposed in previous studies, some parts of the CNDF2 model are modified in order to adapt to the non-Darcian flow, especially the equivalent series hydraulic conductivity and fluid flow. The verification examples of the CNDF2 model demonstrate excellent accuracy for both small strain and large strain consolidation. According to the applicable conditions of non-Darcian flow law, the CNDF2 model is most suitable for the fine-grained soil. The development of CNDF2 is first presented, followed by examples to analyze the influences of the non-Darcian flow on the consolidation behavior. 相似文献
19.
20.
In the present work, stationary discontinuities and fluttery instabilities of wave propagation in saturated poro‐elastoplastic media are analysed in the frame of Biot theory. The generalized Biot formulations are particularly employed for simulating non‐linear coupled hydro‐mechanical behaviour of the media. Inertial coupling effect between the solid and the fluid phases of the media is also taken into account. The non‐associated Drucker–Prager criterion to describe non‐linear constitutive behaviour of pressure dependent elasto‐plasticity for the solid skeleton of the media is particularly considered. With omission of compressibility of solid grains and the pore fluid, the critical conditions of stationary discontinuities and flutter instabilities occurring in wave propagation are given in explicit forms. It is shown that when the stationary discontinuity is triggered at the surface of discontinuity there still may exist real wave speeds. The wave speeds across the stationary discontinuity surface entirely cease to be real only in non‐associated plasticity, certain ranges of value of Poisson's ratio and when compression stress normal to the surface of discontinuity dominates the stress state at the surface. It is also indicated that the fluttery instabilities, under which some wave speeds cease to be real even in strain hardening stage, may occur prior to stationary discontinuities only for non‐associated plasticity under certain conditions. These conditions are: (1) both the porosity and the Poisson's ratio possess relatively low values and (2) the deviatoric part of the effective stress normal to the surface of discontinuity is compressive. A region in the porosity–Poisson's ratio plot, in which fluttery instabilities are possible to occur, is given. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献