共查询到20条相似文献，搜索用时 93 毫秒
1.
We have collected GPS data in the period of 1999-2007 from the Crustal Motion Observation Network of China along the Zhangjiakou-Bohai fault and its adjacent regions to study the characteristics of present-day crustal horizontal motion velocities in the research zone.Strain rate components are computed in the spheric coordinate system by the least square collocation method.According to the spatial distribution of the principal strain rate,dilation rate and maximum shear strain rate derived from GPS measurements,this paper analyses the deformation of the subordinary faults of the Zhangjiakou-Bohai fault.The principal compression strain rates are apparently greater than the principal extension strain rates.The larger shear strain rate is mainly in and around the Xianghe,Wenan and Tangshan areas in Hebei Province.According to the profiles across different segments of the Zhangjiakou-Bohai fault,the three segments glong the Zhangjiakou-Bohai fault show an obviously left-lateal strike-slip and compression characteristics.By analysis of the motion characteristics of the blocks,e.g.the Yanshan block,North China Plain block,Ordos block,and Ludong-Huanghai block in and around the North China region,this paper speculates that the dynamics of the motion styles of Zhangjiakou-Bohai fault may directly come from the relative movement between the Yanshan block and the North China plain block,and the ultimate dynamics may be the results of the collison between Indian plate and Eurasian plate,and the persistent northeastward extrusion of the Indian plate. 相似文献
2.
位于青藏块体和华北块体之间的鄂尔多斯块体及其周缘地区是中国大陆构造活动最活跃的地区之一,从1300年至今,在块体周边断陷盆地和西南缘断裂带上发生了五次8级以上的地震.为了了解该地区现今地壳运动、应变状态以及断裂滑动分布,我们收集了中国大陆构造环境监测网络2009—2013年、国家GPS控制网、跨断陷盆地的8个GPS剖面等共527个流动站和32个连续站GPS观测数据,获得了高空间分辨率的地壳水平运动速度场,进一步用均匀弹性模型计算了应变率分布.结果表明,块体内部GPS站点向NEE方向运动,速度变化较小,应变率大多在(-1.0~1.0)×10~(-8)/a之间;山西断陷带构造运动与变形最为强烈,盆地相对于鄂尔多斯块体为拉张变形,应变率为(1.0~3.0)×10~(-8)/a,相对于东部山地则为挤压变形,应变率为(-2.0~-3.0)×10~(-8)/a,盆地西侧断裂(如罗云山断裂、交城断裂)以拉张运动为主,拉张速率为2~3mm·a-1,盆地东侧断裂主要以右旋缩短运动为主,速率为1~3mm·a-1;河套断陷带西部的临河凹陷处于较强的张性应变状态,应变率为(2.0~3.0)×10~(-8)/a;块体西南边缘处于压缩应变状态,应变率为(-1.0~-2.0)×10~(-8)/a,六盘山断裂存在明显的地壳缩短运动,速率约为2.1mm·a-1,速率在断裂附近逐渐减小,反映了断裂处于闭锁状态;相对于鄂尔多斯块体内部渭河断裂带为左旋运动,速率为1.0mm·a-1,盆地处在弱拉张变形状态. 相似文献
3.
Wang Ruobai 《中国地震研究》2005,19(3):327-337
INTRODUCTIONThe Zhangjiakou-Penglai fault zone has drawnextensive attentionfromseismologists and geologistssince it was determinedinthe1980’s(Zheng Binghua,et al.,1981).Ma Xingyuan,et al.(1989)consideredit asthe north boundaryof North China sub-block.Int… 相似文献
4.
张家口—渤海断裂带分段运动变形特征分析 总被引：1，自引：0，他引：1
利用张家口—渤海断裂带(张渤带)及其邻区1999—2007年的GPS观测数据, 研究了该区域现今地壳水平速度场特征。 运用最小二乘配置方法获得应变率场的空间分布特征, 根据区域地壳主应变率、 面膨胀率和最大剪切应变率等形变场的空间变化, 分析了张渤带各分段的形变特征。 结果表明: 相对于欧亚框架, 研究区内GPS速度场以SE方向运动为主; 应变场以NE方向的主压应变为主, 伴随着近NW方向的张性应变; 整个张渤带及其邻区的高剪切变形区主要位于河北香河、 文安以及唐山等三个地区。 利用跨断层GPS剖面分析得到张渤带以左旋走滑为主, 兼有挤压运动。 华北平原块体和燕山块体的相对运动是张渤带左旋走滑的直接动力来源, 而印度板块与欧亚板块碰撞后继续向北的推挤作用则是张渤带运动变形的根本动力来源, 太平洋板块的作用相对较弱。 相似文献
5.
利用汾渭盆地及其邻域2001—2007年与2009—2011年高精度GPS监测资料,基于区域构造特点,采用块体运动应变模型结合数理统计假设检验法,建立了区域合理的地壳运动应变模型,基于此定量研究了区域现今地壳应变场及其变化特征,特别是2008年汶川强震对汾渭盆地区域变形特征的作用影响,同时从盆地整体上分析了盆地内多发的地裂缝灾害与区域整体构造变形特征之间的内在关系.研究结果表明:经统计检验判断,选择合理的区域地壳运动应变模型,对获取真实反映区域实际构造变形特性的应变参数具有重要的作用;2008年汶川强震对青藏东边缘地块及渭河盆地西侧局部地区应变场造成一定的影响,但是震后上述区域并没有出现显著的应变积累而是呈现出应变量值较震前减小的特征,分析其原因可能是因为此区域并不是强震造成的库仑应力显著增加区,在震后2009—2011年时间段内处于构造应力场的松弛调整期;汶川强震没有显著改变研究域现今整体的构造变形背景特征,区域地壳构造活动特征仍具有较好的继承性;基于研究域构造块体具有各向同性连续弹性变形的前提,初步推断整个汾渭盆地内多发的地裂缝灾害可能是区域NW—SE向拉张应力场作用下的地表破裂响应. 相似文献
6.
7.
Based on the GPS velocity field data of 1999-2007 and 2011-2013,we used the least squares configuration method and GPS velocity profile results to synthetically analyze the dynamic evolution characteristics of crustal deformation in the Yunnan area before and after the Wenchuan earthquake. The dynamic evolution of GPS velocity field shows that the direction is gradually changed from the south in the southern part of the Sichuan-Yunnan block to the south-west in the southern Yunnan block and there is a clear relative motion characteristic near the block boundary fault zone. Compared with the GPS velocity of 1999-2007, the results of 2011-2013 also reflect segmental deformation characteristics of the block boundary fault zone. Southeast movement shows a significant increase, which may be related to crustal deformation adjustment after the Wenchuan earthquake. The dynamic evolution of strain parameters shows a pattern of "extension in the middle and compression at both ends" in the whole area and the distribution of deformation (shear, extension or compression) is closely related to the background motion and deformation characteristics of the main fault zone. Compared with the results of the period of 1999-2007, the extensional deformation zone of 2011-2013 is expanded eastward and southward. The compressional deformation of the eastern boundary (the Xiaojiang fault zone) of the Sichuan-Yunnan block is no longer significant, which is mainly concentrated in the northern section of the Xiaojiang fault zone and may be related to the post-seismic deformation adjustment of the Wenchuan earthquake. The GPS velocity profile results show that the left-lateral slip velocity of the Xiaojiang fault zone reduced gradually from north to south (10mm/a-5mm/a), and the width of the northern section is wider. The right-lateral slip rate of the Honghe fault zone is about 4mm/a, and the deformation width is wider. The dynamic results show that the Wenchuan earthquake has little effect on the deformation modes of these two fault zones. 相似文献
8.
四川地区地质构造复杂,地壳活动剧烈,为了深入揭示该区“Y”型构造区地壳1999年以来近20年的动态演化规律,基于1999—2017年7期GPS数据,解算各周期网格速度场、应变率场,研究地壳应变场演化过程。结果表明：①2008年以前的3期GPS速度场相对稳定,汶川地震后,速度场变化最大的龙门山断裂带由4.0—5.0 mm/a增至8.0—10.0 mm/a;②汶川震后,“Y”型构造区最大剪应变高值区出现在汶川以东,由2.0×10-8/a增到22.0×10-8/a;龙门山断裂带以SE或SEE向主压应变为主,变化速率约5.0×10-8/a—12.0×10-8/a,鲜水河断裂由震前NS向主拉应变转为震后EW向主压应变,安宁河断裂东侧由震前SE向主压应变6.0×10-8/a减至震后的2.0×10-8/a;面膨胀结果显示,由震前低密度梯度带瞬间变为平行于龙门山断裂带走向的高密度变化区,且存在以金川至都江堰、北川至青川为条带的2个正负交替过渡区;③汶川地震发生压应力释放后,该区SEE向压性特征又逐渐增强,且持续至2017年,释放了龙门山断裂带地壳内部SEE向压应力多年累积能量,但汶川地震对鲜水河断裂与安宁河断裂的整体运动状态则无明显触发作用。 相似文献
9.
10.
NEAR-FAULT DISPLACEMENT AND DEFORMATION OBTAINED FROM ONE-KILOMETER-LONG FAULT-CROSSING BASELINE MEASUREMENTS-A PRELIMINARY EXPERIMENT AT 2 SITES ON THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK 
下载免费PDF全文
下载免费PDF全文 The current and conventional fault-crossing short baseline measurement has a relatively high precision, but its measurement arrays usually fail to or cannot completely span major active fault zones due to the short length of the baselines, which are only tens to 100 meters. GNSS measurement has relatively low resolution on near-fault deformation and hence is not suitable for monitoring those faults with low motion and deformation rates, due to sparse stations and relatively low accuracy of the GNSS observation. We recently built up two experimental sites on the eastern boundary of the active Sichuan-Yunnan block, one crossing the Daqing section of the Zemuhe Fault and the other crossing the Longshu section of the Zhaotong Fault, aiming to test the measurement of near-fault motion and deformation by using fault-crossing arrays of one-kilometer-long baselines. In this paper, from a three-year-long data set we firstly introduce the selection of the sites and the methods of the measurement. We then calculate and analyze the near-field displacement and strain of the two sites by using three hypothetical models, the rigid body, elastic and composed models, proposed by previous researchers. In the rigid body model, we assume that an observed fault is located between two rigid blocks and the observed variances in baseline lengths result from the relative motion of the blocks. In the elastic model, we assume that a fault deforms uniformly within the fault zone over which a baseline array spans, and in the array baselines in different directions may play roles as strainmeters whose observations allow us to calculate three components of near-fault horizontal strain. In the composed model, we assume that both displacement and strain are accumulated within the fault zone that a baseline array spans, and both contribute to the observed variances in baseline lengths. Our results show that, from the rigid body model, variations in horizontal fault-parallel displacement component of the Zemuhe Fault at the Daqing site fluctuate within 3mm without obvious tendencies. The displacement variation in the fault-normal component keeps dropping in 2015 and 2016 with a cumulative decrease of 6mm, reflecting transverse horizontal compression, and it turns to rise slightly(suggesting extension)in 2017. From the elastic model, the variation in horizontal fault-normal strain component of the fault at Daqing shows mainly compression, with an annual variation close to 10-5, and variations in the other two strain components are at the order of 10-6. For the Longshu Fault, the rigid-body displacement of the fault varies totally within a few millimeters, but shows a dextral strike-slip tendency that is consistent with the fault motion known from geological investigation, and the observed dextral-slip rate is about 0.7mm/a on average. The fault-parallel strain component of the Longshu Fault is compressional within 2×10-6, and the fault-normal strain component is mainly extensional. Restricted by the assumption of rigid-body model, we have to ignore homolateral deformation on either side of an observed fault and attribute such deformation to the fault displacement, resulting in an upper limit estimate of the fault displacement. The elastic model emphasizes more the deformation on an observed fault zone and may give us information about localizations of near-fault strain. The results of the two sites from the composed model suggest that it needs caution when using this model due to that big uncertainty would be introduced in solving relevant equations. Level surveying has also been carried out at the meantime at the two sites. The leveling series of the Daqing site fluctuates within 4mm and shows no tendency, meaning little vertical component of fault motion has been observed at this site; while, from the rigid-body model, the fault-normal motion shows transverse-horizontal compression of up to 6mm, indicating that the motion of the Zemuhe Fault at Daqing is dominantly horizontal. The leveling series of the Longshu site shows a variation with amplitude comparable with that observed from the baseline series here, suggesting a minor component of thrust faulting; while the baseline series of the same site do not present tendencies of fault-normal displacement. Since the steep-dip faults at the two sites are dominantly strike-slip in geological time scale, we ignore probable vertical movement temporarily. In addition, lengths of homolateral baselines on either side of the faults change somewhat over time, and this makes us consider the existence of minor faults on either side of the main faults. These probable minor faults may not reach to the surface and have not been identified through geological mapping; they might result in the observed variances in lengths of homolateral baselines, fortunately such variations are small relative to those in fault-crossing baselines. In summary, the fault-crossing measurement using arrays with one-kilometer-long baselines provides us information about near-fault movement and strain, and has a slightly higher resolution relative to current GNSS observation at similar time and space scales, and therefore this geodetic technology will be used until GNSS networks with dense near-fault stations are available in the future. 相似文献
11.
RESEARCH OF SEISMOGENIC STRUCTURE OF THE MENYUAN MS6.4 EARTHQUAKE ON JANUARY 21, 2016 IN LENGLONGLING AREA OF NE TIBETAN PLATEAU 下载免费PDF全文
下载免费PDF全文 On January 21 2016, an earthquake of MS6.4 hit the Lenglongling fault zone(LLLFZ)in the NE Tibetan plateau, which has a contrary focal mechanism solution to the Ms 6.4 earthquake occurring in 1986. Fault behaviors of both earthquakes in 1986 and 2016 are also quite different from the left-lateral strike-slip pattern of the Lenglongling fault zone. In order to find out the seismogenic structure of both earthquakes and figure out relationships among the two earthquakes and the LLLFZ, InSAR co-seismic deformation map is constructed by Sentinel -1A data. Moreover, the geological map, remote sensing images, relocation of aftershocks and GPS data are also combined in the research. The InSAR results indicate that the co-seismic deformation fields are distributed on both sides of the branch fault(F2)on the northwest of the Lenglongling main fault(F1), where the Earth's surface uplifts like a tent during the 2016 earthquake. The 2016 and 1986 earthquakes occurred on the eastern and western bending segments of the F2 respectively, where the two parts of the F2 bend gradually and finally join with the F1. The intersections between the F1 and F2 compose the right-order and left-order alignments in the planar geometry, which lead to the restraining bend and releasing bend because of the left-lateral strike-slip movement, respectively. Therefore, the thrust and normal faults are formed in the two bending positions. In consequence, the focal mechanism solutions of the 2016 and 1986 earthquakes mainly present the compression and tensional behaviors, respectively, both of which also behave as slight strike-slip motion. All results indicate that seismic activity and tectonic deformation of the LLLFZ play important parts in the Qilian-Haiyuan tectonic zone, as well as in the NE Tibetan plateau. The complicated tectonic deformation of NE Tibetan plateau results from the collisions from three different directions between the north Eurasian plate, the east Pacific plate and the southwest Indian plate. The intensive tectonic movement leads to a series of left-lateral strike-slip faults in this region and the tectonic deformation direction rotates clockwise gradually to the east along the Qilian-Haiyuan tectonic zone. The Menyuan earthquake makes it very important to reevaluate the earthquake risk of this region. 相似文献
12.
利用GPS观测资料计算并获取了2008年新疆西昆仑地区于田7.3级地震发生前的现今地壳运动速度场,通过速度场分布研究了区域内主要断层的活动速率.结果表明:震中以南的龙木错断裂呈左旋走滑性质的运动特征,走滑速率为1.2～2.5 mm/a;震中以北的阿尔金左旋走滑断裂滑动速率为5 mm/a;震中北西面的康西瓦断裂的左旋走滑平均速率约为3～7 mm/a.区域应变场分布一定程度上受断裂带分布的影响.7.3级地震就位于断裂活动交汇的部位和最大剪应变率高值区的边缘. 相似文献
13.
利用鲜水河断裂带1990年1月-2009年12月的蠕变与短基线数据,采用小波变换与断层运动学分析方法,获取构造活动产生的断层形变速率.结合近场断层形变测量与GPS资料,分析了该断裂带的分段活动特征及时空演化.结果显示:(1)不同段落断层活动方式存在差异性.鲜水河断裂带分段活动现象显著,以道孚县为界,以北的炉霍、道孚断层走滑量相对较大且活动方式稳定,显示张性和左行走滑;以南的乾宁、折多塘断层活动微弱,走滑量小,且滑动状态复杂,其中,乾宁断层为压性和左行走滑,折多塘断层为微弱的右行走滑.这种分段活动特征可能与断层几何及巴颜喀拉块体内部次级块体的差异运动有关.(2)不同时期断层走滑方式存在交替性.鲜水河断裂带虽以左行走滑为主,但在汶川地震前一些断层段出现过逆向走滑现象.汶川地震前2年,炉霍、道孚断层左行走滑减弱,乾宁、折多塘断层在2007年出现过逆向走滑,至2009年底,逆向走滑区域保持扩展态势.(3)不同测点间距得到的断层错动速率和变形带空间分布特征不同.不同测量方法的分析结果表明,鲜水河断裂带不同段落和跨距宽度的走滑速率有所不同:测点间距18.7~65.1 m的蠕滑速率为0.01~0.78 mm/a;测点间距72~288 m的短基线测量为0.02~2.46 mm/a,点距十几至几十公里的GPS观测为6~11 mm/a;地质滑动速率5~15 mm/a.随测点间距的增加,平行断层的位移速率按对数函数增长,视剪应变率按幂函数衰减.我们推测,大间距测点的数据中既包含了跨断层的错动,也包含了断层两侧块体的分布变形;现今的断层形变测量与地质调查之间的差异,说明断层错动速率在时间上不是常数. 相似文献
14.
甘孜—玉树断裂带是青藏高原中东部的一条大型左旋走滑断裂带,同时也是羌塘地体和巴颜喀拉地体的重要地质边界.当江断裂位于甘孜—玉树断裂带的西北段,沿线发育当江荣、当江和哲达等一系列串珠状第四纪断层谷地.通过遥感影像解译和数字高程地形模型(DEM)数据分析,结合野外构造地貌调查,以及断错地貌面的光释光年代测定,发现断裂沿线冲沟、河流阶地和洪积扇等断错地貌发育,反映了该断裂晚第四纪左旋走滑活动性强烈.该断裂最新活动时代为全新世晚期,距今约3.04 ka.当江断裂晚更新世以来的左旋滑动速率为7±3mm·a~(-1).研究结果为该区的地震危险性分析和高原东北部的运动学特征探讨提供了基础资料. 相似文献
15.
为了解东昆仑断裂活动对2017年8月8日九寨沟MS7.0地震的影响，本文选取1999-2007年、2013-2017年GPS速度场作为约束，基于块体-位错模型反演计算东昆仑断裂两个时间段的块体运动速率、断裂滑动速率和滑动亏损率，并进一步研究青藏高原东缘最大剪应变率场和九寨沟震区的震间库仑应力累积速率.结果显示，东昆仑断裂中西段左旋走滑速率较高，东段走滑速率较低，自西向东逐步递减，存在明显的梯度.在两个时间段，阿坝块体刚性运动的方向顺时针偏转0.2°，运动速率由12.22 mm·a-1增大到15.96 mm·a-1；东昆仑断裂左旋走滑速率升高，其中西段较为明显（升高约1.2±0.3 mm·a-1）；东昆仑断裂东段闭锁深度和闭锁程度增加；2013-2017年，东昆仑断裂滑动引起的九寨沟震区库仑应力累积速率是1999-2007年的3倍，最大剪应变率也明显升高.因此本文认为：2008年汶川地震和2013年芦山地震后，龙门山断裂部分解锁，阿坝地块活动性增强，东昆仑断裂滑动速率增大，导致九寨沟震区库仑应力加载速率增加，加速了九寨沟地震的孕育过程. 相似文献
16.
基于ENVISAT ASAR升降轨数据, 利用InSAR获取2008年于田MW7.2地震同震形变场; 采用SDM反演本次地震断层滑动分布; 使用PSCMP正演获取于田MW7.2地震南北向模拟形变量, 并结合升降轨同震形变场, 解算三维同震形变场。 同震形变场分析表明, 2008年于田MW7.2地震以正断为主, 且带有走滑运动特征, 破裂带走向为NNE向。 同震滑动分布反演结果显示, 断层沿走向被分为4段F1、 F2、 F3、 F4, 其滑动分布集中在0~14 km区间, 以F2、 F3段为主, 最大滑动量约5.31 m, 位于F2段深部2.76 km处; 沿破裂带走向, 左旋走滑位移与垂直位移比值有增大的趋势; 反演获得的地震矩M0=5.58×1019N·m, 相当于矩震级MW7.1。 三维同震形变场解算结果显示, 断层上盘整体表现为沉降, 断层下盘整体表现为隆升, 且沉降量明显大于隆升量, 表明地震以正断破裂为主; 除靠近断裂带中上部表现为向东南运动外, 上盘整体上表现为向西南运动; 断层下盘则整体表现为向东北运动, 证明破裂兼有左旋走滑运动。 滑动分布反演、 正演与三维同震形变场解算结果皆表明, 于田MW7.2地震破裂以正断为主, 且带有一定的左旋走滑。 相似文献
17.
TERRACE DEFORMATION AND SLIP RATES OF THE DONGBIELIEKE FAULT IN WESTERN JUNGGAR BASIN SINCE THE LATE QUATERNARY 下载免费PDF全文
下载免费PDF全文 Strike-slip fault plays an important role in the process of tectonic deformation since Cenozoic in Asia. The role of strike-slip fault in the process of mountain building and continental deformation has always been an important issue of universal concern to the earth science community. Junggar Basin is located in the hinterland of Central Asia, bordering on the north the Altay region and the Baikal rift system, which are prone to devastating earthquakes, the Tianshan orogenic belt and the Tibet Plateau on the south, and the rigid blocks, such as Erdos, the South China, the North China Plain and Amur, on the east. Affected by the effect of the Indian-Eurasian collision on the south of the basin and at the same time, driven by the southward push of the Mongolian-Siberian plate, the active structures in the periphery of the basin show a relatively strong activity. The main deformation patterns are represented by the large-scale NNW-trending right-lateral strike-slip faults dominated by right-lateral shearing, the NNE-trending left-lateral strike-slip faults dominated by left-lateral shearing, and the thrust-nappe structure systems distributed in piedmont of Tianshan in the south of the basin. There are three near-parallel-distributed left-lateral strike-slip faults in the west edge of the basin, from the east to the west, they are:the Daerbute Fault, the Toli Fault and the Dongbielieke Fault. This paper focuses on the Dongbielieke Fault in the western Junggar region. The Dongbielieke Fault is a Holocene active fault, located at the key position of the western Junggar orogenic belt. The total length of the fault is 120km, striking NE. Since the late Quaternary, the continuous activity of the Dongbielieke Fault has caused obvious left-lateral displacement at all geomorphologic units along the fault, and a linear continuous straight steep scarp was formed on the eastern side of the Tacheng Basin. According to the strike and the movement of fault, the fault can be divided into three segments, namely, the north, middle and south segment.
In order to obtain a more accurate magnitude of the left-lateral strike-slip displacement and the accumulative left-lateral strike-slip displacement of different geomorphic surfaces, we chose the Ahebiedou River in the southern segment and used the UAV to take three-dimensional photographs to obtain the digital elevation model(the accuracy is 10cm). And on this basis, the amount of left-lateral strike-slip displacement of various geological masses and geomorphic surfaces(lines)since their formation is obtained. The maximum left-lateral displacement of the terrace T5 is(30.7±2.1)m and the minimum left-lateral displacement is(20.1±1.3)m; the left-lateral displacement of the terrace T4 is(12±0.9)m, and the left-lateral displacement of the terrace T2 is(8.7±0.6)m. OSL dating samples from the surface of different level terraces(T5, T4, T2 and T1)are collected, processed and measured, and the ages of the terraces of various levels are obtained. By measuring the amount of left-lateral displacements since the Late Quaternary of the Dongbielieke Fault and combining the dating results of the various geomorphic surfaces, the displacements and slip rates of the fault on each level of the terraces since the formation of the T5 terrace are calculated. Using the maximum displacement of(30.7±2.1)m of the T5 terrace and the age of the geomorphic surface on the west bank of the river, we obtained the slip rate of(0.7±0.11)mm/a; similarly, using the minimum displacement of(20.1±1.3)m and the age of the geomorphic surface of the east bank, we obtained the slip rate of(0.46±0.07)mm/a. T5 terrace is developed on both banks of the river and on both walls of the fault. After the terraces are offset by faulting, the terraces on foot wall in the left bank of the river are far away from the river, and the erosion basically stops. After that, the river mainly cuts the terraces on the east bank. Therefore, the west bank retains a more accurate displacement of the geomorphic surface(Gold et al., 2009), so the left-lateral slip rate of the T5 terrace is taken as(0.7±0.11)mm/a. The left-lateral slip rate calculated for T4 and T2 terraces is similar, with an average value of(0.91±0.18)mm/a. In the evolution process of river terraces, the lateral erosion of high-level terrace is much larger than that of low-level terrace, so the slip rate of T4 and T2 terraces is closer to the true value. The left-lateral slip rate of the Dongbielieke Fault since the late Quaternary is(0.91±0.18)m/a. Compared with the GPS slip rate in the western Junggar area, it is considered that the NE-trending strike-slip motion in this area is dominated by the Dongbielieke Fault, which absorbs a large amount of residual deformation while maintaining a relatively high left-lateral slip rate. 相似文献
18.
张家口—渤海断裂带分段活动性研究 总被引：5，自引：0，他引：5
利用GPS资料,用地壳运动强度和大空间尺度变形分析了张家口—渤海断裂带的活动性。 结果表明,燕山地块与华北平原的地壳运动强度以张—渤带为明显的分界线,张-渤带以左旋走滑为主。 通过最小二乘配置对GPS资料进行了空间去噪声处理,并建立球面位错模型,反演了张—渤带的11条断层,结果表明: NW向断层以左旋走滑为主; NE向断层中,活动性最强的是以倾滑为主的沧东断裂。 2001—2004年时段与1999—2001年时段相比,张—渤带中西段、西段断层的走滑量略有减小,而其中东段、东段的走滑量有较大程度增大。 这种现象可能与该区域构造应力场有关。 相似文献
19.
本文首先沿走向将鲜水河断裂带划分为炉霍、道孚、乾宁、康定和磨西五个断裂段,利用沿断裂带布设的跨断层短基线、短水准场地测量资料计算了近场的断层活动参数,利用覆盖断裂带相对较大区域的重力、GPS观测资料计算了重力场动态变化、GPS速度场.基于重力场动态变化和GPS速度场采用蚁群算法和粒子群算法(具有全局优化的优势)分别反演计算了五个断裂段断层活动参数,将结果中的走滑分量作为五个断裂段的现今走滑速率.通过对以上三类现今走滑速率及五个断裂段的地质平均滑动速率进行融合与对比分析,将重力资料反演计算结果作为断裂带整体走滑速率,与跨断层短基线、短水准测量计算的断层滑动速率结果进行对比分析,初步判定了各跨断层短基线、短水准场地所跨断裂的性质,最终给出了五个断裂段的现今整体左旋走滑速率和部分分支断裂左旋走滑速率,结果为:(1)炉霍段为9.13mm·a~(-1),虾拉沱区域西支断裂为2.46mm·a~(-1),东支断裂为5.84mm·a~(-1).(2)道孚段为8.57mm·a~(-1),东南段沟普区域西支断裂为1.78mm·a~(-1),东支断裂为6.79mm·a~(-1).(3)乾宁段为7.67mm·a~(-1).(4)康定段为6.14mm·a~(-1).(5)磨西段为4.41mm·a~(-1).本文还定性讨论了断裂带两侧重力、GPS测点覆盖范围内活动地块的三维弹塑性变形和古地震、历史地震造成的永久位错. 相似文献
20.
2017年8月8日四川发生九寨沟M7.0地震,是继2008年汶川M8.0地震后发生在巴颜喀拉块体东部的又一强震.现今GPS速度观测数据显示,2008年汶川地震前后的1999-2007年和2011-2016年两个时间段内巴颜喀拉块体东部地表速度场存在明显的差异.本文以实际GPS速度观测资料为约束,构建三维有限元地球动力学模型,分别计算分析了两个时段内震源区及周边现今地壳形变、弹性应变能和应力积累特征,进一步探讨汶川地震的发生对九寨沟地区变形及应力的影响.数值模拟结果显示,汶川地震之后(2011-2016年)巴颜喀拉块体东部的地壳形变、弹性应变能积累及应力积累速率均明显大于震前,增加量值达1.5-3倍;九寨沟地震发震断裂上库仑应力增长率在1999-2007年约为0.7 kPa·a~(-1),2011-2016年间增至1.2 kPa·a~(-1).上述结果表明,现今巴颜喀拉块体东部地壳应力积累过程有利于左旋走滑型九寨沟地震的发生,汶川地震的发生调整了区域应力状态,加速了九寨沟地震的孕育过程. 相似文献