首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
The Daliangshan fault zone is the eastern branch in the central section of Xianshuihe-Xiaojiang fault system. It has been neglected for a long time, partly because of no destructive earthquake records along this fault zone. On the other hand, it is located on the remote and inaccessible plateau. So far it was excluded as part of the Xianshuihe-Xiaojiang fault system. Based on the interpretation of aerophotographs and field investigations, we document this fault zone in detail, and give an estimation of strike-slip rate about 3 mm/a in Late Quaternary together with age dating data. The results suggest that the Daliangshan fault zone is a newly-generated fault zone resulted from shortcutting in the central section of Xianshuihe-Xiaojiang fault system because of the clockwise rotation of the Southeastern Tibetan Crustal Block, which is bounded by the Xianshuihe-Xiaojiang fault system. Moreover, the shortcutting may make the Daliangshan fault zone replace the Anninghe and Zemuhe fault zones gradually, and finally, the later two fault zones will probably die out with the continuous clockwise rotation.  相似文献   

2.
This study is devoted to a systematic analysis of the stress state of the eastern boundary area of Sichuan-Yunnan block based on focal mechanisms of 319 earthquakes with magnitudes between M3.0 and M6.9, occurring from January 2009 to May 2018. We firstly determined the mechanism solutions of 234 earthquakes by the CAP method, using the broadband waveforms recorded by Chinese regional permanent networks, and collected 85 centroid moment tensor solutions from the GCMT. Then we investigated the regional stress regime through a damp linear inversion. Our results show that:1)the focal mechanisms of moderate earthquakes are regionally specific with three principal types of focal mechanisms:the strike-slip faulting type, the thrust faulting type and the normal faulting type. The strike-slip faulting type is significant in the eastern boundary area of Sichuan-Yunnan block along the Xianshuihe-Xiaojiang Fault, the Daliangshan Fault, and the Zhaotong-Lianfeng Fault. The thrust faulting type and the combined thrust/strike-slip faulting type are significant along the Mabian-Yanjin Fault, Ebian-Yanfeng Fault and the eastern section of Lianfeng Fault; 2)The most robust feature of the regional stress regime is that, the azimuth of principal compressive stress axis rotates clockwise from NWW to NW along the eastern boundary of Sichuan-Yunnan Block, and the clockwise rotation angle is about 50 degrees. Meanwhile, the angels between the principal compressive axis and the trend of eastern boundary of Sichuan-Yunnan Block remain unchanged, which implies a stable coefficient of fault friction in the eastern boundary fault zone of Sichuan-Yunnan Block. The movement of the upper crust in the southeastern Tibetan plateau is a relatively rigid clockwise rotation. On the whole, the Xianshuihe-Xiaojiang Fault is a small arc on the earth, and its Euler pole axis is at(21°N, 88°E). The Daliangshan Fault is surrounded by the Anninghe-Zemuhe Fault, which formed a closed diamond shape. When the Sichuan-Yunnan block rotates clockwise, the Daliangshan Fault locates in the outer of the arc, while the Anninghe-Zemuhe Fault is in the inward of the arc, and from the mechanical point of view, left-lateral sliding movement is more likely to occur on the Daliangshan Fault. Our results can be the evidence for the study on the "cut-off" function of the Daliangshan Fault based on the stress field background; 3)The regional stress regime of the eastern boundary faults zone of the Sichuan-Yunnan Block is the same as the south section of the Dalianshan Fault, and the focal mechanism results also reveal that the Dalianshan Fault is keeping left-lateral strike-slip. There may be the same tectonic stress field that controls the earthquake activities in the southern section of Daliangshan Fault and Zhaotong-Lianfeng Fault. The regional stress regime of Zhaodong-Lianfeng Fault is also the same with the Sichuan-Yunnan Block, which implies that the control effect of the SE movement of the Sichuan-Yunnan block may extend to Weining.  相似文献   

3.
The main rupture of Ludian MS6.5 earthquake is directed to the northwest, which occurred in the east of Xianshuihe-Xiaojiang fault zone. The epicenter is in the transitional zone of the Sichuan-Yunnan block and the South China block, where there are many slip and nappe structures. Some controversy still remains on the earthquake tectonic environment. So, Bouguer gravity anomalies calculated by EGM2008 were broken down into 1-5 ranks using the way of Discrete Wavelet Transform(DWT), then we get the lateral heterogeneity in different depths of the crust. The distribution characteristics of Bouguer gravity anomaly are analyzed using measured gravity profile data. We also get its normalized full gradient(NFG)picture, and study the differences between different depths in crust. The results show that: (1)the characteristic of Buoguer gravity anomaly in southwest to northeast is high-low-high between the Lianfeng Fault(LFF)and Zhaotong-Ludian Fault(ZLF). The mainshock and aftershocks are distributed in the middle of the low-value zone, which means that the east moving materials of Qinghai-Tibet plateau broke through the southern section of Lianfeng Fault(LFF), moving along the Baogunao-Xiaohe zone(low-value belt)to the southeast, stopped by the Zhaotong-Ludian Fault(ZLF), and then earthquake occurred.(2)The third-order discrete wavelet transform(DWT)details show that: there is a good consistency between the negative gravity anomaly in upper crust and the distribution of major faults, which reflects that the rupture caused by the movements of the faults in crust has reduced gravity anomaly. There is a NW-trending negative anomaly belt near the epicenter, which may has some relationship to the southward development of the Daliangshan Fault(DLSF). So we speculate that the southward movement of Daliangshan Fault is the main direct force source of Ludian earthquake.(3)In the picture of the fourth-order DWT details, there is an obvious positive gravity anomaly under the epicenter of Ludian earthquake, which confirms the presence of a high-density body in the middle crust. While the fifth-order DWT details show that: A positive anomaly belt is below the epicenter too, which may be caused by mantle material intruding to the lower crust. Tensile force in crust caused by mantle uplift and extrusion-torsion force caused by Indian plate push are the main force source in the tensile and strike slip movement of the Ludian earthquake.(4)The normalized total gradient of Bouguer gravity anomalies of Huili-Ludian-Zhaotong profile shows that: there is obvious ‘deformation’ in the Xiaojiang fault zone which dips to the east and controls the local crust movement. There is a local ‘constant body’ at the bottom of the epicenter. The stable constant body in density has limiting effects to the earthquake rupture, which is the reason that the earthquake rupture' scale in strike and in depth are limited.(5)The ability of earthquake preparation in Zhaotong-Ludian Fault is lower than the Xianshuihe-Xiaojiang fault zone, and the maximum earthquake capacity in this area should be around magnitude 7.  相似文献   

4.
2008年汶川8.0级地震前横跨龙门山断裂带的震间形变   总被引：17，自引：4，他引：13       下载免费PDF全文
利用区域GPS和水准测量资料,结合地震构造背景的分析,本文研究2008年汶川8.0级地震前横跨龙门山断裂带地区的震间地壳形变,探讨引起这种形变的活动构造与动力学模式,并由此认识汶川地震的孕育与成因机制.主要结果表明：1997～2007年期间,自龙门山断裂带中段朝北西约230 km的地带内存在垂直于断裂的水平缩短变形、以及平行于断裂的水平右旋剪切变形,缩短率为1.3×10-8/a （即：0.013 mm/km/a）,角变形速率为2.6×10-8/a;同一地带在1975～1997年期间还表现出垂直上隆变形,上隆速率在龙门山前山断裂与中央断裂之间仅0.6 mm/a,而至龙门山后山断裂及其以西达2～3 mm/a.这些反映了在汶川地震之前至少10～30余年,龙门山断裂带中段的前山与中央断裂业已闭锁、并伴有应变积累.造成这种形变的主要原因是：以壳内的低速层为“解耦”带,巴颜喀拉地块上地壳朝南东的水平运动在四川盆地西缘受到华南地块的阻挡、转换成龙门山断裂带中段的逆冲运动;由于该断裂段的震间闭锁,致使西侧的巴颜喀拉地块的上地壳发生横向缩短以及平行断裂的右旋剪切变形.然而,龙门山断裂带北段在1997～2007年期间除了有大约0.9 mm/a的右旋剪切变形外,横向的缩短变形极微弱,这可能与该断裂段西侧的岷江、虎牙、龙日坝等断裂带吸收了巴颜喀拉地块朝东水平运动的大部分有关.另外,汶川地震前,横跨龙门山断裂带中段与北段的地壳形变特征的差异,与汶川地震时能量释放的空间分布吻合.  相似文献   

5.
The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local his-torical record shows that a M≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge: 1 The average sinistral strike-slip rate since the Late Pleistocene is about 3~7 mm/a; 2 There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7~4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3~7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.  相似文献   

6.
The Pishan MS6.5 earthquake occurred in the west Kunlun piedmont area. According to the surface deformation data obtained by the Pishan MS6.5 earthquake emergency field investigation team, combined with the positioning accuracy of spatial distribution of aftershocks information, the focal mechanism solutions and deep oil profile data, we think the Pishan MS6.5 earthquake is a typical thrust faulting event, and the seismogenic structure is the Pishan reverse fault-anticline, which did not produced obvious surface fault zone on the surface. In the vicinity of the core of the Pishan anticline, we found some tensional ground fissures whose strikes are all basically consistent with the anticline. We propose that the surface deformation is caused by the folding and uplift of the anticline. The Pishan earthquake is a typical folding earthquake. The tectonic deformation of the west Kunlun piedmont is dominated by the thickening and shortening of the upper crust which is the typical thin-skinned nappe tectonic. The Pishan earthquake occurred in the frontal tectonic belt, the root fault of the nappe structure has not been broken, and we should pay attention to the seismic risk of the Tekilik Fault.  相似文献   

7.
The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles.  相似文献   

8.
The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(ML ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block.  相似文献   

9.
林吉焱  段永红 《地震学报》2016,38(2):179-187
基于甘肃省夏河县—陕西省靖边县剖面的8次人工地震初至波数据, 利用有限差分走时方法反演得到了沿该剖面长约650 km的上部地壳速度结构和结晶基底的深度分布． 反演结果显示: 海原构造区西侧的西秦岭—祁连山褶皱区上部地壳的横向非均匀性明显, 基底深度从1 km到5 km不等, 反映了褶皱区改造变形强烈的构造特征; 其东侧的鄂尔多斯盆地基底深度约为5—6 km, 其速度均匀、 稳定, 上地壳呈弱速度梯度特征; 海原构造区及海原弧形断裂带附近上部地壳的破坏变形最严重, 区内横向高低速相间分布． 综上可知, 海原构造区东西两侧上地壳结构的显著差异揭示了其结构复杂性的成因及其与地震活动性的关系．   相似文献   

10.
Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active fault zone newly-generated in late Quaternary along this tectonic system.  相似文献   

11.
海原一六盘山构造带是青藏高原东北缘地区的一条重要边界,在海原断裂带和六盘山断裂带接触区形成了特殊的马东山挤压阶区,本文对跨过该挤压阶区一条密集测点大地电磁剖面数据进行了处理和二维反演,获得的深部电性结构图像揭示在马东山挤压阶区深部电性结构表现为在高阻背景下镶嵌多个向西南倾斜的低阻条带电阻率结构样式,并在深度约25 km汇聚到中下地壳低阻层内,共同组成"正花状"结构;海原一六盘山构造带西南侧到陇中盆地区间呈现高、低阻相互"楔合"的深部结构特征,而其东北侧的鄂尔多斯西缘带自地表到中下地壳为较完整的高阻块体.另外结合跨过海原断裂带中段和西秦岭造山带的大地电磁探测结果,对海原一六盘山构造带分段性及其两侧的陇中盆地和鄂尔多斯地块的接触关系进行了研究分析.大地电磁探测成果佐证了在海原断裂带中段为具有走滑特点的断裂,而其尾端与六盘山断裂带斜交区域的马东山地区发生了强烈的逆冲推覆与褶皱变形;活动构造研究发现沿海原断裂带所产生的左旋走滑位移被其尾端的马东山、六盘山以东西向的地壳缩短调节吸收,GPS观测表明青藏高原东北缘地区现今构造变形分布在海原一六盘山构造带以西上百公里的范围内,陇中盆地一海原一六盘山构造带和鄂尔多斯地块一线的深部电性结构图像也很好地解释了该区变形状态:海原一六盘山构造带带及西南盘的陇中盆地的中下地壳非常破碎,在青藏高原向北东方向的推挤下容易发生变形,而北东盘鄂尔多斯地块地壳结构完整,很难发生构造变形.对海原一六盘山构造带马东山阶区和龙门山构造带的深部电性结构及变形特征等进行了比较分析,发现该区有与2008年汶川地震相似的深部构造背景,应重视该区强震孕育环境的探测研究.  相似文献   

12.
In this paper, the baseline variation and displacement vector was analyzed using the calculated results of GPS measurements carried out from 1995 to 1996 in North China. Based on these analytical results, we studied the recent tectonic activity. In general, the regional extension is dominant in the direction of proximately EW, but there is a difference in the SN direction. Extension is significant in the Shanxi fault-depression zone and Bohai region, while compression with strike-slip is characterized along the Yishui-Tancheng segment of the Tanlu fault zone. The baseline shortening zone is distributed along the Baotou-Zhangjiakou-Ninghe areas. It is a boundary zone of regional variation where many differences of crustal horizontal deformation are discovered between the southern part and the northern part of this zone. The baseline shortening zone in NE direction is distributed along the Jianchang-Tangshan-Gucheng area. It is consistent with the Tangshan-Xingtai seismic zone which indicates that tectoni  相似文献   

13.
IntroductionXianshuihe-Xiaojiang fault zone is an important active fault zone and a strong earthquake belt in the southeastern margin of Qinghai-Tibet Plateau (Figure 1). Since 814 AD a total of 14 earthquakes with M ( 7, including one of magnitude 8.0, took place there. This large-scale fault zone runs from north to south, includes the northwesterly Xianshuihe fault, the near-NS An(ninghe fault, NNW Zemuhe fault, and near-NS Xiaojiang fault. It forms the east boundary of Sichuan-Yunn…  相似文献   

14.
Seismo-tectonic areas of historical strong earthquakes with MS37 along Xianshuihe-Xiaojiang fault zone are di-vided, and their individual fault-pattern and tectonic geomorphology are analyzed. Those strong-earthquake areas are located in some special parts of the fault zone, where the major branch-faults of the fault zone form left step-ping, parallel, and fork-like patterns. In the strong-earthquake areas structurally complicated basins are developed, such as pull-apart basins in fork-like area, in double stepping area, and in stepping and fork-like areas.  相似文献   

15.
划分了鲜水河——小江断裂带7级以上历史地震的强震构造区，分析了各强震构造区地质构造和构造地貌特征．认为强震构造区是沿断裂带的一些特殊构造段落，区内以断裂带主要分支断层的左阶斜列、并行排列或三叉构造组合为主体构造格局．强震构造区内发育了构造较复杂的盆地类型，如三叉区拉分盆地、双阶区拉分盆地和阶区 三叉区拉分盆地等．   相似文献   

16.
在川滇活动地块东南边界区域完成了盐源-西昌-昭觉-马湖深地震宽角反射/折射探测剖面.利用该剖面获得的Pg初至折射波走时,采用走时特征分析、有限差分反演、时间项反演等方法,获得了沿剖面的基底P波速度结构和基底界面构造图像.结果表明,研究区基底结构呈现强烈的非均匀性,不同构造区显示出不同的地壳变形特征.盐源盆地盖层表现为推...  相似文献   

17.
龙门山南段前陆区晚第四纪构造变形样式   总被引：4，自引：1，他引：3       下载免费PDF全文
龙门山中南段前陆区是青藏高原东缘唯一发育新生代薄皮构造与沉积盆地的地段，研究其最新构造变形样式有助于深入理解青藏高原向东扩展的构造机理.论文通过青衣江河流阶地测量与古青衣江洪积扇形态重建，研究了龙门山南段前陆区晚第四纪活动构造格局及其活动性，取得了如下认识：（1）青衣江河流阶地纵剖面显示，龙门山南段前陆地区晚第四纪变形主要为褶皱作用，总体地壳缩短速率为2.5~3.9 mm·a-1，远大于山区冲断带0.48~0.77 mm·a-1的地壳缩短速率，地壳缩短主要由前陆地区吸收；（2）青衣江古洪积扇错断变形显示，龙门山南段前陆区活动构造表现为北西—南东向地壳缩短与近东西向的地壳缩短的叠加作用，两者分别受控于巴颜喀拉块体南东向推挤作用与川滇块体向东推挤作用；（3）自中新世初川滇块体向南东挤出，四川盆地西南角起到分流青藏高原物质的作用，其西南侧物质通过鲜水河—小江断裂带的左旋错动向南东方向分流，其西北侧物质通过龙门山断裂带的右旋错动向北东方向分流，迎面受到了最大的推挤作用，进而向前陆扩展形成了薄皮褶皱构造带.  相似文献   

18.
鲜水河断裂带的现今水平形变及构造动态   总被引：2，自引：0，他引：2       下载免费PDF全文
据鲜水河断裂带水平测距的新成果,讨论该带现今构造运动的动态特征。在分析水平形变的基础上,联系表层构造形变和区域背景,探讨地块沿断裂带运动的模式。认为该带的现今运动主要表现为断裂带两侧地块往东南的同向不等速滑动,其地表形变效应则与左旋走滑相一  相似文献   

19.
在青藏高原东边缘沿冕宁—宜宾进行了大地电磁探测研究,剖面西起康滇地轴,向东穿过大凉山地块,终止于四川盆地.利用带地形的NLCG(非线性共轭梯度)方法对资料进行了反演,得到沿剖面的二维电性结构.康滇地轴和大凉山地块地壳中存在向上拱起的高导层(HCL),顶面埋深为10～15 km,最浅处不足10 km,厚度大约15～25 km,最小电阻率小于10 Ωm.四川盆地中下地壳不存在高导层.和该剖面北侧的石棉—乐山剖面的地壳电性结构对比分析表明,高导层在南北方向上可能连续延伸,长度大于100 km.壳内高导层的高导电性与岩石的部分熔融有关,并可能含有百分之几的含盐流体,易于流动和变形.青藏高原东部地壳内的可流动层在向东或东南方向流动过程中,由于受到四川盆地的阻挡,转向南或南南东方向,大体沿着大凉山地块的走向.在东西方向,壳内高导层自川滇地块向东运动,穿过大凉山地块西边界的安宁河断裂和则木河断裂,在大凉山地块东部,向四川盆地深部倾俯.本文对于壳内可流动层的存在及其与青藏高原东边缘的变形和地震活动性的关系进行了探讨.  相似文献   

20.
芦山—康定地区是川滇块体、松潘—甘孜块体和华南块体三个块体过渡的"Y"型交汇区,构造变形十分强烈.本文对EGM2008计算的布格重力异常进行1~5阶离散小波变换,得到三方向分量平方和的平方根(HVDM)图像;利用实测剖面布格重力异常数据,得到剖面的布格重力异常归一化总梯度(NFG)图像.结果分析表明:(1)垂直于龙门山断裂带南段剖面的NFG图像显示推覆构造体前端切割较浅、后端逐步变深至中地壳,说明松潘—甘孜块体在深约10~30km之间存在滑脱构造,在青藏高原东向挤出和四川盆地的阻挡作用下,造成深、浅部构造差异性运动,形成逆冲推覆的龙门山构造带;(2)HVDM图像和剖面的NFG图像均显示龙门山断裂带西南段与中段和东北段不同,松潘—甘孜块体对四川盆地的逆冲推覆作用沿北东方向具有分段性;(3)雅江—洪雅剖面NFG图像显示鲜水河断裂带和龙门山断裂之间存在高梯度变化带,在鲜水河断裂带下方强变形带不仅在20km左右东倾至龙门山断裂带前缘,且逐渐近垂直向下伸入至少到下地壳,反映了两大断裂带交汇区域变形作用较强.川滇块体内部和四川盆地内部则显示低值,说明其变形作用较弱.强烈左旋剪切的鲜水河断裂带对芦山—康定地区构造活动具有主要的控制作用.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号