首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.  相似文献   

2.
Love waves recorded by a long-period seismograph at New Delhi (NDI) from seven earthquakes of magnitude 4.3 to 5.2 in Koyna and Bhatsa on the western coast and one earthquake in Ongole on the eastern coast of the Indian Peninsula have been used to determine the seismic moment for each of the earthquakes by waveform modeling. Transverse component of the synthetic seismogram shows that the maximum amplitude of waveform decreases with an increase of source duration. Thus for an evaluation of the seismic moment by equating the amplitude level of the observed and synthetic waveforms, we must know the source duration. The synthetic seismogram also indicates that a short source duration gives rise to a small but sharp pulse and this pulse is interpreted as anLg wave. Comparison of the observed and synthetic waveforms has been used for a simultaneous evaluation of the source duration and seismic moment. The source durations are found to vary between 2.2 and 4.4 s; for earthquakes with a magnitude range between 4.3 and 5.2 these durations are slightly higher than normal. We obtain moment (M 0) of Ongole earthquake (M L =5.1)as 1.7×1024 dyne-cm; moments of Koyna and Bhatsa earthquakes (4.3M L 5.2) on the western coast lie between 0.7×1023 and 3.6×1023 dyne-cm. Moment (M 0)-magnitude (M L ) relation logM 0=1.5M L +16.0 for the western United States region agrees as well, in general, with the results for the earthquakes in the Indian Peninsula.  相似文献   

3.
S-wave spectral analysis is applied to 174 strong motion accelerationrecords to obtain the source parameters of 27 aftershocks(3.1 ML 4.3) of the May 13, 1995, Mw 6.6,Kozani-Grevena (NW Greece) earthquake. The data are derived from atemporary network, of three-component digital accelerographs, deployedwithin the strongly affected area some days after the mainshock occurrence.Site effects were evident in the strong motion records at 3 out of the 4stations used, and a correction was applied to account for theoverestimation of seismic moment due to amplification of thelow-frequency part of the spectrum. The data from this analysis arecomplimented with previously obtained source parameters for earthquakesin Greece, in order to study the applicability of the empirical scalingrelations used so far, towards smaller magnitudes. In general, a goodcorrelation was observed in most cases, validating the use of empiricalrelations that are applicable to the Aegean area. Empirical relations aredetermined between seismic moment and seismic slip, as well as, betweenseismic moment and stress drop, applicable to small magnitude earthquakes(ML < 4.3). Stress drop values were found to be relatively small,ranging from 2 to 41 bars, indicative of inter-plate environments. Thevalues of fc and of fmax were found in good agreement withrelations based on observations from larger worldwide earthquakes.  相似文献   

4.
A shallow earthquake ofM S=6.2 occurred in the southern part of the Peloponnesus, 12 km north of the port of the city of Kalamata, which caused considerable damage. The fault plane solution of the main shock, geological data and field observations, as well as the distribution of foci of aftershocks, indicate that the seismic fault is a listric normal one trending NNE-SSW and dipping to WNW. The surface ruptures caused by the earthquake coincide with the trace of a neotectonic fault, which is located 2–3 km east of the city of Kalamata and which is related to the formation of Messiniakos gulf during the Pliocene-Quaternary tectonics. Field observations indicate that the earthquake is due to the reactivation of the same fault.A three-days aftershock study in the area, with portable seismographs, recorded many aftershocks of which 39 withM S1.7 were very well located. The distribution of aftershocks forms two clusters, one near the epicenter of the main shock in the northern part of the seismogenic volume, and the other near the epicenter of the largest aftershock (M S=5.4) in the southern part of this volume. The central part of the area lacks aftershocks, which probably indicates that this is the part of the fault which slipped smoothly during the earthquake.  相似文献   

5.
ＳｏｕｒｃｅｐａｒａｍｅｔｅｒｓｏｆｔｈｅＧｏｎｇｈｅ，ＱｉｎｇｈａｉＰｒｏｖｉｎｃｅ，Ｃｈｉｎａ，ｅａｒｔｈｑｕａｋｅｆｒｏｍｉｎｖｅｒｓｉｏｎｏｆｄｉｇｉｔａｌｂｒｏａｄｂａｎｄｗａｖｅｆｏｒｍｄａｔａＬＩ－ＳＨＥＮＧＸＵ（许立生）ａｎｄＹＵＮ...  相似文献   

6.
To evaluate the tectonic significance of the October 20, 1986 Kermadec earthquake (M w =7.7), we performed a comprehensive analysis of source parameters using surface waves, body waves, and relocated aftershocks. Amplitude and phase spectra from up to 93 Rayleigh waves were inverted for centroid time, depth, and moment tensor in a two-step algorithm. In some of the inversions, the time function was parameterized to include information from the body-wave time function. The resulting source parameters were stable with respect to variations in the velocity and attenuation models assumed, the parameterization of the time function, and the set of Rayleigh waves included. The surface wave focal mechanism derived (=275°, =61°, =156°) is an oblique-compressional mechanism that is not easy to interpret in terms of subduction tectonics. A seismic moment of 4.5×1020 N-m, a centroid depth of 45±5 km, and a centroid time of 13±3 s were obtained. Directivity was not resolvable from the surface waves. The short source duration is in significant contrast to many large earthquakes.We performed a simultaneous inversion ofP andSH body waves for focal mechanism and time function. The focal mechanism agreed roughly with the surface wave mechanism. Multiple focal mechanisms remain a possibility, but could not be resolved. The body waves indicate a short duration of slip (15 to 20 s), with secondary moment release 60s later. Seismically radiated energy was computed from the body-wave source spectrum. The stress drop computed from the seismic energy is about 30 bars. Sixty aftershocks that occurred within three months of the mainshock were relocated using the method of Joint Hypocentral Determination (JHD). Most of the aftershocks have underthrusting focal mechanisms and appear to represent triggered slip on the main thrust interface. The depth, relatively high stress drop, short duration of slip, and paucity of true aftershocks are consistent with intraplate faulting within the downgoing plate. Although it is not clear on which nodal plane slip occurred, several factors favor the roughly E-W trending plane. The event occurred near a major segmentation in the downgoing plate at depth, near a bend in the trench, and near a right-lateral offset of the volcanic are by 80 km along an E-W direction. Also, all events in the region from 1977 to 1991 with CMT focal mechanisms similar to that of the Mainshock occurred near the mainshock epicenter, rather than forming an elongate zone parallel to the trench as did the aftershock activity. We interpret this event as part of the process of segmentation or tearing of the subducting slab. This segmentation appears to be related to the subduction of the Louisville Ridge, which may act as an obstacle to subduction through its buoyancy.  相似文献   

7.
Based on the three component accelerograms, recorded at near-field distance by a temporary seismic network consisting of digital cassette tape recording accelerographs, the focal mechanisms of three aftershocks of the April 18, 1985, Luquan, Yunnan Province, China, earthquake ofM S=6.1, are calculated using seismic moment tensor inversion technique. The phases of direct P, S and converted SP waves in the displacement seismograms, produced by twice integrations of the observed accelerograms, are identified via forward calculation using Green’s functions for homogeneous semi-infinite elastic medium, and used in the inversion. The results of inversion show that a better fit of synthetic to the observed seismograms of direct as well as converted phases can be achieved if appropriate weighting functions are used in solving the over definite linear equations. While these aftershocks are of different magnitudes (M L=4.8, 3.2 and 3.5, respectively) and hypocentral locations, their focal mechanisms are very similar and consistent with that of the main shock. This feature demonstrates the intrinsic correlation between the occurrence of aftershocks and the seismogenic fault of main shock. Our experimentations show that using the near field accelerogram obtained from the digital seismic network with appropriate azimuthal coverage on the focal sphere, with the aid of even simple medium model, not only the shear dislocation source, but also the isotropic part and CLVD (compensated linear vector dipole) can be retrieved by the technique of moment tensor inversion. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 412–419, 1991. This work is supported by the Chinese Joint Seismological Sciences Foundation and the Western Yunnan Earthquake Prediction Test Site (WYEPTS), State Seismological Bureau.  相似文献   

8.
Long-term seismic activity prior to the December 26, 2004, off the west coast of northern Sumatra, Indonesia, M W=9.0 earthquake was investigated using the Harvard CMT catalogue. It is observed that before this great earthquake, there exists an accelerating moment release (AMR) process with the temporal scale of a quarter century and the spatial scale of 1 500 km. Within this spatial range, the M W=9.0 event falls into the piece-wise power-law-like frequency-magnitude distribution. Therefore, in the perspective of the critical-point-like model of earthquake preparation, the failure to forecast/predict the approaching and/or the size of this earthquake is not due to the physically intrinsic unpredictability of earthquakes.  相似文献   

9.
We studied broadband digital records of the M W = 7.6 Olyutorskii earthquake of April 20, 2006 and its aftershocks at local and regional distances. We have made a detailed analysis of data on peak ground motion velocities and accelerations due to aftershocks based on records of two digital seismic stations, Tilichiki (TLC) and Kamenskoe (KAM). The first step in this analysis was to find the station correction for soil effects at TLC station using coda spectra. The correction was applied to the data to convert them to the reference bedrock beneath the Kamenskoe station. The second step involved multiple linear regression to derive average relationshis of peak amplitude to local magnitude ML and distance R for the Koryak Upland conditions. The data scatter about the average relationshis is comparatively low (0.22–0.25 log units). The acceleration amplitudes for M L = 5, R = 25 km are lower by factors of 2–3 compared with those for eastern Kamchatka, the western US, or Japan. A likely cause of this anomaly could be lower stress drops for the aftershocks.  相似文献   

10.
Source inversion of small-magnitude events such as aftershocks or mine collapses requires use of relatively high frequency seismic waveforms which are strongly affected by small-scale heterogeneities in the crust. In this study, we developed a new inversion method called gCAP3D for determining general moment tensor of a seismic source using Green's functions of 3D models. It inherits the advantageous features of the “Cut-and-Paste” (CAP) method to break a full seismogram into the Pnl and surface-wave segments and to allow time shift between observed and predicted waveforms. It uses grid search for 5 source parameters (relative strengths of the isotropic and compensated-linear-vector-dipole components and the strike, dip, and rake of the double-couple component) that minimize the waveform misfit. The scalar moment is estimated using the ratio of L2 norms of the data and synthetics. Focal depth can also be determined by repeating the inversion at different depths. We applied gCAP3D to the 2013 Ms 7.0 Lushan earthquake and its aftershocks using a 3D crustal-upper mantle velocity model derived from ambient noise tomography in the region. We first relocated the events using the double-difference method. We then used the finite-differences method and reciprocity principle to calculate Green's functions of the 3D model for 20 permanent broadband seismic stations within 200 km from the source region. We obtained moment tensors of the mainshock and 74 aftershocks ranging from Mw 5.2 to 3.4. The results show that the Lushan earthquake is a reverse faulting at a depth of 13–15 km on a plane dipping 40–47° to N46° W. Most of the aftershocks occurred off the main rupture plane and have similar focal mechanisms to the mainshock's, except in the proximity of the mainshock where the aftershocks' focal mechanisms display some variations.  相似文献   

11.
By using a broadband Lg attenuation model developed for the Tibetan Plateau, we isolate source terms by removing attenuation and site effects from the observed Lg-wave displacement spectra of the M7.0 earthquake that occurred on August 8, 2017, in Jiuzhaigou, China, and its aftershock sequence. Thus, the source parameters, including the scalar seismic moment, corner frequency and stress drop, of these events can be further estimated. The estimated stress drops vary from 47.1 kPa to 7149.6 kPa, with a median value of 59.4 kPa and most values falling between 50 kPa and 75 kPa. The estimated stress drops show significant spatial variations. Lower stress drops were mainly found close to the mainshock and on the seismogenic fault plane with large coseismic slip. In contrast, the highest stress drop was 7.1 MPa for the mainshock, and relatively large stress drops were also found for aftershocks away from the major seismogenic fault and at depths deeper than the zone with large coseismic slip. By using a statistical method, we found self-similarity among some of the aftershocks with a nearly constant stress drop. In contrast, the stress drop increased with the seismic moment for other aftershocks. The amount of stress released during earthquakes is a fundamental characteristic of the earthquake rupture process. As such, the stress drop represents a key parameter for improving our understanding of earthquake source physics.  相似文献   

12.
Predicting earthquakes by analyzing accelerating precursory seismic activity   总被引：14，自引：0，他引：14  
During 11 sequences of earthquakes that in retrospect can be classed as foreshocks, the accelerating rate at which seismic moment is released follows, at least in part, a simple equation. This equation (1) is ,where is the cumulative sum until time,t, of the square roots of seismic moments of individual foreshocks computed from reported magnitudes;C andn are constants; andt fis a limiting time at which the rate of seismic moment accumulation becomes infinite. The possible time of a major foreshock or main shock,t f,is found by the best fit of equation (1), or its integral, to step-like plots of versus time using successive estimates oft fin linearized regressions until the maximum coefficient of determination,r 2,is obtained. Analyzed examples include sequences preceding earthquakes at Cremasta, Greece, 2/5/66; Haicheng, China 2/4/75; Oaxaca, Mexico, 11/29/78; Petatlan, Mexico, 3/14/79; and Central Chile, 3/3/85. In 29 estimates of main-shock time, made as the sequences developed, the errors in 20 were less than one-half and in 9 less than one tenth the time remaining between the time of the last data used and the main shock. Some precursory sequences, or parts of them, yield no solution. Two sequences appear to include in their first parts the aftershocks of a previous event; plots using the integral of equation (1) show that the sequences are easily separable into aftershock and foreshock segments. Synthetic seismic sequences of shocks at equal time intervals were constructed to follow equation (1), using four values ofn. In each series the resulting distributions of magnitudes closely follow the linear Gutenberg-Richter relation logN=a–bM, and the productn timesb for each series is the same constant. In various forms and for decades, equation (1) has been used successfully to predict failure times of stressed metals and ceramics, landslides in soil and rock slopes, and volcanic eruptions. Results of more recent experiments and theoretical studies on crack propagation, fault mechanics, and acoustic emission can be closely reproduced by equation (1). Rate-process theory and continuum damage mechanics offer leads toward understanding the physical processes.  相似文献   

13.
The 2010 Yushu MS7.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock (33.13°N, 96.59°E, focal depth 10.22 km) and more than 600 aftershocks were obtained. The focal mechanisms of the mainshock and some aftershocks with MS>3.5 were estimated by jointly using broadband velocity waveforms from Global Seismic Network (GSN) and Qinghai Seismic Network as well. The focal mechanisms and relocation show that the strike of the fault plane is about 125° (WNW-ESE), and the mainshock is left-laterally strikeslip. The parameters of shear-wave splitting were obtained at seismic stations of YUS and L6304 by systematic analysis method of shear-wave splitting (SAM) method. Based on the parameters of shear-wave splitting and focal mechanism, the characteristics of stress field in seismic source zone were analyzed. The directions of polarization at stations YUS and L6304 are different. It is concluded that after the mainshock and the MS6.3 aftershock on April 14, the stress-field was changed.  相似文献   

14.
A MS8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (MS5.0～6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was briefly introduced, and an aftershock of the Wenchuan earthquake sequence was employed to illustrate the real procedure for inverting the moment tensor; secondly, the moment tensor solutions and STFs of the eight events, including the main shock, were presented, and finally, the interpretation of the results was made. The agreement of our results with the GCMT results indicates the new approach is efficient and feasible. By using this approach, not only the moment tensor solution can be obtained but also the STF can be retrieved; the inverted STFs indicate that the source rupture process may be complicated even for the moderate earthquakes. The inverted focal mechanisms of the Wenchuan earthquake sequence show that the most of the aftershocks occurred in the main faults of the Longmenshan fault zone with predominantly thrustingwith minor right-lateral strike-slip component, but some of them may have occurred in the subfaults with strike-slip faulting in the vicinity of the main faults.  相似文献   

15.
In this paper changes in focal mechanisms, parameters of wave spectra, and stress drops for the M S=5.0 foreshock and M S=6.0 mainshock in February 2001 in Yajiang County, Sichuan, and seismicity in epicentral region are studied. Comparison of focal mechanisms for the Yajiang earthquakes with distribution patterns of aftershocks, the nodal plane I, striking in the direction of NEN, of the Yajiang M=5.0 event is chosen as the faulting plane; the nodal plane II, striking in the direction of WNW, of the M=6.0 event as the faulting plane. The strikes of the two faulting planes are nearly perpendicular to each other. The level of stress drops in the epicentral region before the occurrence of the M=6.0 earthquake increases, which is consistent with increase of seismicity in the epicentral region. The rate decay of the Yajiang earthquake sequence, changes in wave spectra for foreshocks and aftershocks, and focal mechanisms are complex.  相似文献   

16.
An earthquake ofM S=6.9 occurred at the Gonghe, Qinghai Province, China on April 26, 1990. Three larger aftershocks took place at the same region,M S=5.5 on May 7, 1990,M S=6.0 on Jan. 3, 1994 andM S=5.7 on Feb. 16, 1994. The long-period recordings of the main shock from China Digital Seismograph Network (CD-SN) are deconvolved for the source time functions by the correspondent recordings of the three aftershocks as empirical Green’s functions (EGFs). No matter which aftershock is taken as EGF, the relative source time functions (RSTFs) obtained are nearly identical. The RSTFs suggest theM S=6.9 event consists of at least two subevents with approximately equal size whose occurrence times are about 30 s apart, the first one has a duration of 12 s and a rise time of about 5 s, and the second one has a duration of 17 s and a rise time of about 8 s. Comparing the RSTFs obtained from P- and SH-phases respectively, we notice that those from SH-phases are a slightly more complex than those from P-phases, implying other finer subevents exist during the process of the main shock. It is interesting that the results from the EGF deconvolution of long-period wavform data are in good agreement with the results from the moment tensor inversion and from the EGF deconvolution of broadband waveform data. Additionally, the two larger aftershocks are deconvolved for their RSTFs. The deconvolution results show that the processes of theM S=6.0 event on Jan. 3, 1994 and theM S=5.7 event on Feb. 16, 1994 are quite simple, both RSTFs are single impulses. The RSTFs of theM S=6.9 main shock obtained from different stations are noticed to be azimuthally dependent, whose shapes are a slightly different with different stations. However, the RSTFs of the two smaller aftershocks are not azimuthally dependent. The integrations of RSTFs over the processes are quite close to each other, i. e., the scalar seismic moments estimated from different stations are in good agreement. Finally the scalar seismic moments of the three aftershocks are compared. The relative scalar seismic moment of the three aftershocks deduced from the relative scalar seismic moments of theM S=6.9 main shock are very close to those inverted directly from the EGF deconvolution. The relative scalar seismic moment of theM S=6.9 main shock calculated using the three aftershocks as EGF are 22 (theM S=6.0 aftershock being EGF), 26 (theM S=5.7 aftershock being EGF) and 66 (theM S=5.5 aftershock being EGF), respectively. Deducing from those results, the relative scalar sesimic moments of theM S=6.0 to theM S=5.7 events, theM S=6.0 to theM S=5.5 events and theM S=5.7 to theM S=5.5 events are 1.18, 3.00 and 2.54, respectively. The correspondent relative scalar seismic moments calculated directly from the waveform recordings are 1.15, 3.43, and 3.05.  相似文献   

17.
We determine the rupture velocity, rupture area, stress drop and duration of four strong deep-focus earthquakes in the Philippines by back-projecting the teleseismic P waves. Four deep-focus earthquakes occurred in a totally consumed Molucca microplate; their focal depths were greater than 550 km and their moment magnitudes were between M w 6.6 and M w 7.6. By studying this deep-focus cluster, we are able to estimate the rupture velocity, rupture area and stress drop which would assist in constraining the physical mechanism for earthquakes deeper than 500 km. Since the Molucca microplate is totally consumed, little evidence is left on the surface for us to do research. This deep-focus cluster provides us the opportunity to reveal the properties of this totally consumed microplate by using seismic method for the first time. Four earthquakes in this deep-focus cluster all have multiple rupture subevents. The M w 7.3 event ruptures in two subevents, the M w 7.6 and M w 7.4 events both have three subevents. The M w 6.6 event has single peak on the amplitude as a function of time; however, its energy releases at two spatially separated areas. Our results show that this deep-focus cluster has a slow rupture velocity which is about 0.27 to 0.43 of the shear wave velocity, long-scaled duration, concentrated energy release area, and high stress drop. These source properties are similar to those of other deep earthquakes occurring in warm slabs and indicate that the totally consumed Molucca microplate possibly is a warm plate.  相似文献   

18.
On July 25, 1969, anM s 5.9 earthquake shook the Kwangtung Province near Yangjiang, China. Casualties and extensive damage were reported in the epicentral area. The Yangjiang earthquake occurred within the passive margin located along China's southeast coast. This stable continental setting is seismically one of the most quiet regions of China; historic records indicate this earthquake to have been the first devastating one in the area. A remarkable feature of this earthquake sequence is that its foreshocks and aftershocks are relatively small in terms of number and magnitude despite the relatively large main shock.Waveforms of long-and short-period teleseismicP and long-period teleseismicSH waves have been modeled to estimate the source parameters for this earthquake. The focal mechanism determined is predominately strike-slip with a small normal component (strike=263°, dip=79°, rake=194°) and is in good agreement with observations in the epicentral area regarding dislocation direction of fissures, distribution of aftershocks, and isoseismals. The average seismic moment is 5.15×1024 dyne-cm and the focal depth is estimated to be 9 km. The earthquake is characterized by a rather short source-time function and a high stress drop of approximately 380 bars. The observed pattern of the foreshock-main shock-aftershock sequence is interpreted in terms of the large stress drop associated with the main shock and the material properties at and near the source. TheP-axis orientation lies roughly NW-SE and is consistent with the maximum compressive stress observed along the coast of southeast China. This stress orientation is consistent with the NW subducting Philippine Sea plate and the SE ward push from central China due to the convergence between Indian and Eurasian subcontinents.  相似文献   

19.
IntroductionSince the late 1970s, the quickly developed global digital seismograph network has been providing high quality recordings of large earthquakes in global scale, based on which digital seismology has made great progress. Compared with large earthquakes, moderate and small sized shocks have more frequent occurrence, and comprise clues to geological tectonics and tectonic stress field in a region. Preceding and following a large earthquake, usually occur numbers of small events that im…  相似文献   

20.
Long-term seismic activity prior to the December 26, 2004, off the west coast of northern Sumatra, Indonesia, M W=9.0 earthquake was investigated using the Harvard CMT catalogue. It is observed that before this great earthquake, there exists an accelerating moment release (AMR) process with the temporal scale of a quarter century and the spatial scale of 1 500 km. Within this spatial range, the M W=9.0 event falls into the piece-wise power-law-like frequency-magnitude distribution. Therefore, in the perspective of the critical-point-like model of earthquake preparation, the failure to forecast/predict the approaching and/or the size of this earthquake is not due to the physically intrinsic unpredictability of earthquakes. Foundation item: Ministry of Science and Technology Project (2004CB418406). Contribution No. 05FE3010, Institute of Geophysics, China Earthquake Administration.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号