共查询到20条相似文献，搜索用时 156 毫秒
1.
2.
桩基-非线性框剪结构相互作用体系(下)-- 相互作用对结构地震反应的影响 总被引：1，自引：0，他引：1
本文研究桩基-非线性框剪结构相互作用体系的地震反应。其中上部框架和剪力墙结构分别用门型单元和四弹簧墙单元进行分析;桩基阻抗函数通过单桩阻抗和动力相互作用因于求得。采用频-时域混合法求解体系的动力方程,本文研究了在桩基-框剪结构相互作用体系地震反应分析中,桩基阻抗的频率相关性对结构地震反应的影响,并从土体剪切波速和地震波强度两个方面,研究了土-桩-结构相互作用对框剪结构地震反应的影响。 相似文献
3.
目前,我国尚缺乏液化场地桩-土-桥梁结构地震相互作用分析的合理数值模型与简化分析方法。鉴于此,直接针对振动台试验,基于非线性文克尔地基梁模型,考虑桩周参振土的质量惯性力、上部结构的惯性力、土体辐射阻尼等效应,建立了液化场地桩-土-桥梁结构地震相互作用的p-y曲线分析模型,并给出相应的简化方法。针对振动台试验进行了0.1g El Centro波输入下的分析,验证了桩-土地震相互作用分析方法的正确性,并且推荐了计算参数的合理选取方法,可用于液化场地桩-土地震相互作用的分析。提出的液化场地桩-土地震相互作用p-y曲线简化分析方法,为实际桥梁桩基抗震设计与分析提供一定参考。 相似文献
4.
本文研究水平地震作用下桩-土体系中桩基的地震反应,为桩基的抗震设计提供依据。以单桩为研究对象,建立有限元分析模型并加以验证,再根据场地条件选取输入波,分析了桩、桩-均匀土体、桩-分层土体3种模型处于弹性和弹塑性状态下的桩基的变形特性和受力性能。研究表明,桩动力分析时必须考虑桩周土的影响,若按静力法的桩-弹簧模型进行桩的设计会使桩身不安全。 相似文献
5.
考虑土-结构相互作用双层柱面网壳在多点输入下的地震反应分析 总被引：3，自引：0，他引：3
目前对于网壳结构的地震反应研究大部分仍然采用一致输入,特别是没有考虑土-结构相互作用对网壳结构的影响。本文通过对大型有限元分析软件MSC.Nastran的二次开发,用等效线性化方法考虑土体的非线性,对土体采用三维实体单元建模,并对土体在基岩面上采用地震动的多点输入,计算分析了大跨度双层柱面网壳的动力反应,并且与一致地震动输入下网壳结构的地震反应进行了对比,考察了两者之间的差异,深入分析了考虑土-结构相互作用下,双层柱面网壳结构在多点输入和一致输入下的地震反应规律,并得出了一些重要结论。 相似文献
6.
7.
为研究曲线桥梁在多维地震激励下考虑桩-土动力相互作用的地震响应特性,本文建立了空间桩-土脱离、摩阻和土体压缩非线性理论分析模型。为简化计算将该非线性弹簧模型进行线性化处理,结合有限元ANSYS分析平台建立了黄土场地的曲线桥仿真分析模型,对考虑桩-土相互作用的曲线桥进行了多维多工况数值分析,对比研究了曲线主梁跨中弯矩、墩底剪力和弯矩及桥墩顶位移的地震响应。结果表明:考虑桩-土相互作用的曲线桥梁主梁跨中内力与地震波输入方向密切相关,三维地震作用下主梁内力最大;各工况地震荷载作用下桥墩底部径向剪力响应比切向剪力响应大很多,而桥墩径向弯矩比切向弯矩略小;同一工况下不同桥墩顶切向位移响应大小相当,而径向位移差异较大。在进行非规则曲线桥梁抗震设计时,应充分考虑多维和单维地震激励输入工况。 相似文献
8.
土-结构体系的分枝模态与约束模态混合二步法 总被引：1，自引：0，他引：1
为了在结构设计过程中考虑土-结构非线性相互作用的影响,在线性-非线性混合的约束模态法以及分枝模态法的基础上,提出了适用于土-结构非线性相互作用体系的分枝模态与约束模态的混合方法,该方法既可考虑土体和结构的非线性特性又便于考察土-结构相互作用对上部结构的影响。在分枝模态与约束模态混合方法的基础上,进一步提出了混合二步分析法,并将其应用到地基土-框架结构地震响应分析中,算例结果表明,混合二步分析法在实现上部结构和地基土分开计算的同时,还能够考虑结构与地基土的材料非线性特性,有利于采用专业设计软件仅通过对上部结构进行分析来考虑土-结构相互作用的影响,为实际工程计算考虑土-结构相互作用的影响提供了便利的条件。 相似文献
9.
土-桩-框架结构非线性相互作用的精细数值模型及其验证 总被引：1，自引：0，他引：1
利用有限元软件ABAQUS,建立了土-桩-框架结构非线性相互作用（SSI）的二维精细有限元模型,分别采用记忆型粘塑性嵌套面模型和损伤塑性模型模拟土体和混凝土材料,采用梁单元和rebar单元模拟RC桩基及其内部纵筋,采用接触面对法模拟桩土接触效应,取得了良好的计算效果。将自由场、框架、土-桩-框架结构模型的分析结果和其它成熟的计算软件进行对比,验证了数值模型的有效性。分析发现：桩基外侧靠近承台处的土体的非线性反应很强烈,而桩基内部土体的非线性反应较小,很大程度上只是跟随群桩一起运动。由于桩土动力接触,桩顶的加速度反应可能超出上部结构,并且桩顶的加速度时程曲线上有非常明显的＂针＂状突变。随着地震动强度的增加,上部框架逐渐表现出单自由度体系的动力特征,加速度反应谱有从多个波峰退化为单一波峰的趋势。 相似文献
10.
本文在全面考虑上部结构、基础及下部土体实际情况和受力特性的基础上,开发了一种平面框剪土-结构相互作用的简化分析模型。在这个模型中,利用矩阵位移法的概念,同时考虑框架和剪力墙(筒体)的协同工作原理,将上部结构简化成平面的框架-剪力墙(筒体)结构,这一模型可以很好地模拟常用高层建筑体系的弯曲特性和弯剪特性。地基土采用一块在计算平面内高度为H,宽度为B,而在出平面方向厚度为t的土体作为分析模型,并对MSC.Marc进行了二次开发,将多层土E-B本构关系模型作为子程序嵌入其中,使用E-B本构关系模型来考虑它的非线性特性,利用粘-弹性人工边界作为地基土的边界条件。用接触迭代算法考虑了桩、箱-土之间的相互作用。最后,采用本文的方法对某高层框剪建筑进行了分析,并与不考虑土-结构相互作用的地震反应分析结果进行了对比。通过算例,本文初步探讨了在土-结构相互作用模型中,考虑和不考虑桩-土间相互作用对结构地震反应的影响,并得到了一些结论,证明了本文方法的适用性。 相似文献
11.
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures. 相似文献
12.
The basic natural vibration property of the square-based single layer membranous latticed shell is analyzed using the subspace iteration method. Then, the seismic performances of the structure are studied in detail by the mode-superposition response spectrum method, and the reasonable combination number of vibration modes in seismic analysis by the mode-superposition response spectrum method is investigated. In addition, the formulas of seismic time-history response of a long-span spatial structure are deduced considering geometrical non-linearity, and the corresponding computer program is developed. The results by the response spectrum method and those by the time-history method are, then, compared. The researches show that, the seismic performance of the square-based membranous latticed shell is comparatively well, and the reasonable combination number of vibration modes is 15 in the vertical seismic analysis of this kind of structure by the mode-superposition response spectrum method, whereas, it is 60 in the horizontal seismic analysis. Moreover, the results of the vertical seismic analysis of the structure by the mode-superposition response spectrum method are on the safe side, whereas, in the horizontal seismic analysis of the structure, the results must be checked by the time-history method at the end. All this work will provide theoretical guidance to the actual engineering application of this structure. 相似文献
13.
基于条分模式的边坡可靠度近似计算方法 总被引：1，自引：0，他引：1
通过对边坡稳定分析方法中的条分理论和响应面法的研究,针对边坡可靠性计算往往没有明确的解析表达式,以及稳定性系数计算方法和响应面法（RSM）的特点,将响应面法中的有限元数值模拟以条分模式中的稳定性系数隐式方程的迭代计算方法代替,建立了条分模式下的边坡可靠性计算的极限状态方程,从而形成了一种新的边坡稳定可靠性响应面分析方法。本文提出的改进的响应面法原理简单,计算效率较高并具有一定的精度,适用于对边坡可靠度的近似计算。 相似文献
14.
15.
Armen Der Kiureghian 《地震工程与结构动力学》1981,9(5):419-435
A response spectrum method for stationary random vibration analysis of linear, multi-degree-of-freedom systems is developed. The method is based on the assumption that the input excitation is a wide-band, stationary Gaussian process and the response is stationary. However, it can also be used as a good approximation for the response to a transient stationary Gaussian input with a duration several times longer than the fundamental period of the system. Various response quantities, including the mean-squares of the response and its time derivative, the response mean frequency, and the cumulative distribution and the mean and variance of the peak response are obtained in terms of the ordinates of the mean response spectrum of the input excitation and the modal properties of the system. The formulation includes the cross-correlation between modal responses, which is shown to be significant for modes with closely spaced natural frequencies. The proposed procedure is demonstrated for an example structure that is subjected to an ensemble of earthquake-induced base excitations. Computed results based on the response spectrum method are in close agreement with simulation results obtained from time-history dynamic analysis. The significance of closely spaced modes and the error associated with a conventional method that neglects the modal correlations are also demonstrated. 相似文献
16.
17.
多点激励下结构随机地震反应分析的反应谱方法 总被引：9，自引：3，他引：6
基于随机振动理论,提出了多点激励作用下线性系统随机地震反应分析的均值反应谱方法,给出了结构峰值反应的均值、标准差以及反应平均频率的反应谱组合公式。这可以将反应谱方法推广应用到多点激励结构的抗震可靠度分析中。鉴于组合公式中谱参数和相关系数需要由烦琐的数值积分得到,本文进一步针对它们给出合理的简化计算式,从而使得建议的反应谱方法的计算效率大大增加。最后,以一个双塔斜拉桥为例,对本文方法进行了验证。基于建议方法的计算结果与Monte Carlo模拟结果吻合较好。与经典的多点激励反应谱方法(MSRS法)比较,本文方法具有其无法比拟的计算效率。 相似文献
18.
针对传统频域法拟合人工地震波过程中迭代效率低下的问题，本文提出使用考虑迭代相关的拟合方法与考虑相位谱的拟合方法相结合的综合方法，分别以 《公路桥梁抗震设计规范》 中的设计谱和核电厂设备抗震需求谱为拟合对象，对比了改进的综合方法与传统方法的优劣。结果显示:改进的综合方法对于目标设计谱的拟合精度较传统方法有明显提升，尤其是在反应谱的高频段和低频段；改进方法对于 《公路桥梁抗震设计规范》 中设计谱的拟合效果好于对核电厂设备抗震需求谱的拟合效果。 相似文献
19.
Naohiro Nakamura 《地震工程与结构动力学》2006,35(2):217-231
In order to perform time history earthquake response analyses with consideration to both the dynamic soil–structure interaction and the non‐linear behaviour of the structure, it is important to transform the soil impedance in the frequency domain to the impulse response in the time domain. In this paper, a new transform method with high practicality is proposed. First, the formulation of the proposed transform method is described. Next, the validity of the method is examined using an example problem whose impulse response is analytically obtained. Then, the impedance of the rigid foundation on 2‐layered soil is transformed to the time domain, and the characteristics of the impulse response are investigated. Finally, time history earthquake response analyses of a structure on the soil using the obtained impulse response are carried out. The validity and the efficiency of the proposed method are confirmed through these investigations. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
The peak dynamic responses of two mathematical models of a fifteen-storey steel moment resisting frame building subjected to three earthquake excitations are computed by the response spectrum and time history methods. The models examined are: a ‘regular’ building in which the centres of stiffness and mass are coincident resulting in uncoupled modes with well-separated periods in each component direction of response; and an ‘irregular’ building with the mass offset from the stiffness centre of the building causing coupled modes with the translational modes having closely spaced periods. Four response spectrum modal combination rules are discussed and are used to predict the peak responses: (1) the square root of the sum of the squares (SRSS) method; (2) the double sum combination (DSC) method; (3) the complete quadratic combination (CQC) method; and (4) the absolute sum (ABS) method. The response spectrum results are compared to the corresponding peak time history values to evaluate the accuracy of the different combination rules. The DSC and the CQC methods provide good peak response estimates for both the regular and irregular building models. The SRSS method provides good peak response estimates for the regular building, but yields significant errors in the irregular building response estimates. The poor accuracy in the irregular building results is attributable to the effects of coupled modes with closely spaced periods. It is concluded that the DSC and CQC methods produce response estimates of equivalent accuracy. Both methods are recommended for general use. In addition to the DSC and CQC rules, the SRSS method is recommended for systems where coupled modes with closely spaced periods do not dominate the response. 相似文献