共查询到20条相似文献，搜索用时 921 毫秒
1.
Introduction Seismic monitoring is one of the most important approaches for ground-based nuclear explo-sion monitoring (CTBTO, 1998). The trend in this research field is to improve the monitoring ca-pability for low magnitude seismic events in regional scales. Seismic monitoring mainly includes detection, location, identification and characterization of seismic events. The correctness and accuracy of all of them depend on the quality of seismic re-cords and the degrees of uncertainties of ge… 相似文献
2.
Chen Yongming 《中国地震研究》2004,18(4):337-347
The investigation on damages to frozen soil sites during the West Kunlun Mountains Pass earthquake with Ms 8.1 in 2001 shows that the frozen soil in the seismic area is composed mainly of moraine, alluvial deposit, diluvial deposit and lacustrine deposit with the depth varying greatly along the earthquake rupture zone. The deformation and rupture of frozen soil sites are mainly in the form of coseismic fracture zones caused by tectonic motion and fissures,liquefaction, seismic subsidence and collapse resulting from ground motion. The earthquake fracture zones on the surface are main brittle deformations, which, under the effect of sinlstral strike-slip movement, are represented by shear fissures, tensional cracks and compressive bulges. The distribution and configuration patterns of deformation and rupture such as fissures, liquefaction, seismic subsidence and landslides are all related to the ambient rock and soil conditions of the earthquake area. The distribution of earthquake damage is characterized by large-scale rupture zones, rapid intensity attenuation along the Qinghai-Xizang (Tibet) Highway, where buildings distribute and predominant effect of rock and soil conditions. 相似文献
3.
Shaking Table Test Study on Dynamic Characteristics of Bridge Foundation Reinforcement on Slopes 总被引：3，自引：3，他引：0
With the fast development of bridge construction in mountainous and seismic areas, it is necessary to conduct related research. Based on the design of a shaking table model test, here are the following test results:the filtering effect exists in soil and is affected by the dynamic constraint conditions, the amplitude is strengthened around the natural frequency and weakened in other frequency bands in the Fourier spectrum. Since the acceleration scaling effect occurred on a sloped surface, the acceleration response decreases from the outside to the inside in soil. The dynamic response is relatively strong near the slip surface in bedrock due to the reflection of seismic waves. The failure mode of landslide is decided by the slope angle and slipping mass distribution, and the test shows the front row stabilizing piles should keep a proper distance from bridge foundation so that seismic resistance can be guaranteed for the bridge foundation. 相似文献
4.
This study examines the use of granular soils mixed with tire derived aggregates(TDA) as an underlying soil layer for surface foundations. The benefit of this geotechnical seismic isolation(GSI) scheme is threefold: the seismic force and displacement are significantly reduced; the construction is similar to that of a regular compacted granular fill and the re-use of scrap tires has an assertive environmental impact. These features highlight the rubber/soil mixtures(RSM) as a promising seismic isolation technique for infrastructure and large-scale structures. The seismic isolation capabilities of a rubber-soil foundation layer are investigated, using well defined material properties, and the direct analysis method of the soil-structure system, in the form of a simple oscillator on a soil profile. The influence of the RSM layer on the fundamental variables of the seismic response, namely the base shear and the total drift displacement of the structure on deformable soil, is examined. The structure′s overall stability is studied by means of monotonic lateral load analysis and incremental dynamic analysis, varying the slenderness of the structure and the synthesis of the mixture. The effectiveness and capabilities of the RSM isolation scheme are presented and discussed. 相似文献
5.
SimonWU JonathanLI GordonHUANG G.M.ZENG 《国际泥沙研究》2004,19(1):28-36
The horizontal accuracy of topographic data represented by digital elevation model (DEM) resolution brings about uncertainties in landscape process modeling with raster GIS. This paper presents a study on the effect of topographic variability on cell-based empirical estimation of soil loss and sediment transport. An original DEM of 10m resolution for a case watershed was re-sampled to three realizations of higher grid sizes for a comparative examination. Equations based on the USLE are applied to the watershed to calculate soil loss from each cell and total sediment transport to streams. The study found that the calculated total soil loss from the watershed decreases with the increasing DEM resolution with a linear correlation as spatial variability is reduced by cell aggregation. The USLE topographic factors (LS) extracted from applied DEMs represent spatial variability, and determine the estimations as shown in the modeling results. The commonly used USGS 30m DEM appears to be able to reflect essential spatial variability and suitable for the empirical estimation. The appropriateness of a DEM resolution is dependent upon specific landscape characteristics, applied model and its parameterization. This work attempts to provide a general framework for the research in the DEM-based empirical modeling. 相似文献
6.
This paper applies the Seismic Hazard Analysis method for the cities of China to research on the probability of earthquake occurrence in the Daduhe drainage area, where the cascade dam system is located. This research is based on the potential seismic source scheme of the Seismic Ground Motion Parameter Zonation Map of China （2001）, and uses Poisson distribution as an earthquake occurrence model. Earthquake magnitude obeys truncated exponential distribution. The spatial distribution function of the potential seismic source zone is taken as the first-class spatial probability distribution, and the homogeneous probability distribution in the potential seismic source zone as the second-class spatial probability distribution. Considering the seismic intensity attenuation relationship of western China, we compute the occurrence probability of an earthquake around magnitude 6.0 （5.5 - 6.5）, 7.0 （6.5 - 7.5） and over 7.5 in the Daduhe drainage area, where 22 series cascade dams will be built. The results can be used for hydropower plant planning, hydropower dam site selection and seismic fortification. 相似文献
7.
MA Xingyu WANG Lanmin WANG Qian WANG Ping ZHONG Xiumei PU Xiaowu LIU Fuqiang XU Xiaowei 《中国地震研究》2020,34(4):469-481
Based on the dynamic triaxial liquefaction test of the loess samples which are taken from Shibei tableland, Guyuan City, Ningxia, China, the characteristics of dynamic strain, dynamic stress and pore water pressure are studied under cyclic loading. Triaxial shear test is conducted immediately after the sample reaches liquefaction point. During the test, the property of the liquefied soil is analyzed through fluid mechanics method, whereby the fluidity of the liquefied soil is represented by apparent viscosity.The results show that the fluidity of liquefied loess changes from "shear thickening" to "shear thinning" as the shear force continues, and the fluidity of liquefied loess is closely related to its structure. In addition, in the process of forming a new stable state, the apparent viscosity and deviant stress change with axial strain in a similar approach. When the sample reaches its stable state, it meanwhile shows a relatively stable apparent viscosity. According to the fluid mechanics and the law of conservation of energy, the slip distance of the liquefied soil is estimated, and the results are in good agreement with the field investigation results. 相似文献
8.
Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated. 相似文献
9.
A.Mébarki 《地震工程与工程振动(英文版)》2010,9(2):213-221
This paper deals with the effect of layer height randomness on the seismic response of a layered soil. These parameters are assumed to be lognormal random variables. The analysis is carried out via Monte Carlo simulations coupled with the stiffness matrix method. A parametric study is conducted to derive the stochastic behavior of the peak ground acceleration and its response spectrum,the transfer function and the amplification factors. The input soil characteristics correspond to a site in Mexico City and the input seismic accelerations correspond to the Loma Prieta earthquake. It is found that the layer height heterogeneity causes a widening of the frequency content and a slight increase in the fundamental frequency of the soil profile,indicating that the resonance phenomenon is a concern for a large number of structures. Variation of the layer height randomness acts as a variation of the incident angle,i.e.,a decrease of the amplitude and a shift of the resonant frequencies. 相似文献
10.
This paper presents a new procedure to transform an SSI system into an equivalent SDOF system using twice equivalence. A pushover analysis procedure based on the capacity spectrum method for buildings with SSI effects （PASSI） is then established based on the equivalent SDOF system, and the modified response spectrum and equivalent capacity spectrum are obtained. Furthermore, the approximate formulas to obtain the dynamic stiffness of foundations are suggested. Three steel buildings with different story heights （3, 9 and 20） including SSI effects are analyzed under two far-field and two near-field historical records and an artificial seismic time history using the two PASSI procedures and the nonlinear response history analysis （NLhRHA） method. The results are compared and discussed. Finally, combined with seismic design response spectrum, the nonlinear seismic response of a 9-story building with SSI effects is analyzed using the PASSI procedures, and its seismic performance is evaluated according to the Chinese ＇Code for Seismic Design of Buildings. The feasibility of the proposed procedure is verified. 相似文献
11.
This paper provides an overview of the ideas and methods of the assessment of seismic intensity based on remote sensing and describes the models used to assess the remote sensing based synthetic seismic damage index and seismic intensity. With the data of damage information extracted from the high-resolution aerial images in the earthquake-stricken areas （Jiegu town, Yushu city, Qinghai） of the 2010 Ms7. 1 Yushu earthquake, and the data obtained through post-earthquake field investigation, the seismic damage degree and seismic intensity have been estimated. The analysis of the results shows that the seismic intensity in Yushu city is estimated as IX through the RS assessment method, which is consistent with the result estimated according to the ground surveys. The results are discussed in the last part of the paper and indicate that the RS techniques are expected to be one of the main methods used to estimate the seismic intensity values in the emergency stage. 相似文献
12.
Based on faults surveying and research data in the Tianjin offshore areas, through studying tectonic structure, Quaternary activity, deep structure, stress and strain fields and seismicity in the Tianjin offshore areas, the activity and tectonic features of the faults are determined synthetically. Using seismo-geological data, and the historical and modern seismicity data, the frequency-magnitude relationship model normalized by 500a is established and based on the relationship between the upper limit of maximum magnitude Mu and at/b, the maximum magnitudes of the sea section of the Haihe river fault and the Haiyi fault are calculated. Then Poisson probability model is adopted and the quantitative parameters, such as the maximum magnitude, occurrence probability, recurrence cycle of the faults in the south Tianjin offshore areas in the coming 50 - 200a, are calculated. 相似文献
13.
Jeen-Hwa Wang 《地震学报(英文版)》2013,(6):373-376
The correlation of the scaled energy,e = Es/ Mo, versus earthquake magnitude, Ms, is studied based on two models： （1） Model 1 based on the use of the time function of the average displacements, with a ω^-2 source spectrum, across a fault plane; and （2） Model 2 based on the use of the time function of the average displacements, with a ω^-3 source spectrum, across a fault plane. For the second model, there are two cases： （a） As ζ= T, where r is the rise time and T the rupture time, lg（e） - -Ms; and （b） As ζ 〈〈 T, lg（e）- -（1/2）Ms. The second model leads to a negative value of e. This means that Model 2 cannot work for studying the present problem. The results obtained from Model 1 suggest that the source model is a factor, yet not a unique one, in controlling the correlation of e versus Ms. 相似文献
14.
This paper deals with the response features of AR （apparent ratio of seismic wave velocities to the changes of TR （true ratio of wave velocities） in the horizontal layered model by mathematical modeling. The results show that： （1） the response features of AR are associated with the parameters of the structure and its dynamic changes, and the relative position between the hypocenters and the monitoring networks, showing complicated patterns strongly related to the concrete paths of propagation of seismic waves from the source to the receiver in the observatories of the network; （2） the depth of the seismic source would have important influence on the response features of AR, especially the capacity to carry the anomalous information in the condition of the earth media, being in the anomalous state would be greater for those earthquakes which occur inside the anomalous layers than those underneath the anomalous layers; （3） the response features of AR are clearly related to the changes of TR （true ratio of wave velocities） instead of changes of wave velocities themselves, i.e. the response could be small as the changes in TR is small even in the case of large changes in the wave velocities. It is suggested that more attention must be paid to all these features in combination with detailed investigation of the velocity structure of the earth media in the study region and best fitting of precise hypocenter locations when one wants to obtain the reliable precursors from the changes in AR. 相似文献
15.
We perform Rayleigh wave tomography in east Guangdong and its surrounding regions by applying the ambient noise method to broadband data recorded at 26 stations from Guangdong, Fujian and Jiangxi Digital Seismic Networks. Cross-correlations of vertical- component ambient noise data are computed in one-day segments and stacked over seven months from March to September, 2011. Then Rayleigh wave group dispersion curves are measured using the frequency-time analysis method. Group velocity maps at periods from 5s to 15s are inverted. The resulting group velocity maps generally show good correlation with tectonic features, reflecting the velocity variations in the shallow crust. The basin areas are clearly resolved with lower group velocities at the short periods due to thick sedimentary layers, and the mountain areas with higher group velocities due to thin sedimentary layers. The variations of group velocity on the map can draw out the distribution of basins and mountains in study areas. The geothermal field can change the group velocity obviously, and lower group velocities are always found in high geothermal areas. The velocity maps indicate that a low-velocity layer may be found in the study areas. 相似文献
16.
The focal mechanisms of 62 moderate-small earthquakes since 1980 in the ＂ Huoshan seismic window＂ region are calculated with the method developed recently by Snoke, combining the use of the first motion of P, SV and SH waves with their amplitude ratios. Based on these abundant focal mechanisms, the mean tectonic stress field in the ＂Huoshan seismic window＂ region is inverted with the average stress tensor method, and the result shows that the ＂Huoshan seismic window＂ region is horizontally compressed in the near EW direction and horizontally dilated in the near NS direction, which is in accord with statistical results of focal mechanism parameters. We estimate the difference （also referred to as consistency parameter 0） between the force axis direction of the focal mechanism solution and the mean stress tensor, then further analyze the variation characteristics of 0 versus time, and the relationship with moderately strong earthquakes in the east China region. The result indicates that 0 in the ＂ Huoshan seismic window＂ region is in good correspondence with moderately strong earthquakes in the East China region. When 0 is lower than the mean value, corresponding moderately strong earthquakes may occur in the East China region. 相似文献
17.
总结了凤鸣地震考察工作,了解到震区一带的震感现象和地震影响的分布情况,并且依据《中国地震烈度表》和现场实地考察确定震中区一带地震影响烈度为Ⅳ度,圈定了本次地震的等烈度分布区域。 相似文献
18.
The earthquake occurred in Lushan County on 20 April, 2013 caused heavy casualty and economic loss. In order to understand how the seismic energy propagates during this earthquake and how it causes the seismic haz- ard, we simulated the strong ground motions from a rep- resentative kinematic source model by Zhang et al. （Chin J Geophys 56（4）：1408-1411, 2013） for this earthquake. To include the topographic effects, we used the curved grids finite difference method by Zhang and Chen （Geophys J Int 167（1）：337-353, 2006）, Zhang et al. （Geophys J Int 190（1）：358-378, 2012） to implement the simulations. Our results indicated that the majority of seismic energy con- centrated in the epicentral area and the vicinal Sichuan Basin, causing the XI and VII degree intensity. Due to the strong topographic effects of the mountain, the seismic intensity in the border area across the northeastern of Boxing County to the Lushan County also reached IX degree. Moreover, the strong influence of topography caused the amplifications of ground shaking at the moun- tain ridge, which is easy to cause landslides. These results are quite similar to those observed in the Wenchuan earthquake of 2008 occurred also in a strong topographic mountain area. 相似文献
19.
In this paper, using the 1999 ~ 2007 GPS velocity field data, and by choosing the optimal block model, we obtained the deformation models applicable to the boundary zones of major blocks and the slip rates of block boundary faults on the mid-southern segment of the North-South Seismic Belt. The results show that： on the Longmenshan fault zone, the tensional and compressive slip rate is small on the Baoxing-Wenchuan segment, about 0. 5 ~ 1.8mm·a^-1, and the rate is relatively significant on the segment of the Wenchuan--Maoxian, as 1.8 ~3.8mm·a^-1; on the Xianshuihe fault belt, there is a certain difference in spatial distribution between the tensional slip rag.e and strike-slip rate： the tensional slip rate （ 8. lmm~a-1） is bigger than the sinistral strike-slip rate （ 4.8mm·a^-1） at the north of the Luhuo region; the tension and compression slip rate is basically the same as the strike-slip rate at Luhuo-Dawu; the Dawu-Kangding section presents a trend of decreased strike-slip rate and increased tensional slip rate; the Kangding-ghimian segment shows a strike-slip nature; the strike-slip rate is significantly greater than the tension/compression rate on the Xiaojiang fault zone; the slip rate on the Red River fault zone shows obvious spatial segmentation, the slip rate is smaller in its northwest part, but with a certain amount of tensional/compression component, 4. 7mm·a^-1 on the Jingdong segment. The segment east of Jingdong （ western Gejiu） is mainly of strike-slip, with a slip rate of 4. 5mm·a^-1. 相似文献
20.
It is of great significance to make comparative analyses of seismic fortification criteria at home and abroad for improving the anti-seismic capability of electrical equipment and revising the relevant national standards. A brief overview of American, Japanese, IEC standards and Chinese seismic design codes for electrical equipment is presented. Differences between these seismic fortification standards of electrical equipment are compared and analyzed in respect of the goal and level of seismic fortification and the seismic design spectrum. The advantages and disadvantages of Chinese standards are pointed out. Through learning from foreign experience on the determination of seismic fortification standards, recommendations are made for the improvement and revision of Chinese seismic fortification standards for electrical equipment. 相似文献