共查询到20条相似文献，搜索用时 171 毫秒
1.
2.
3.
4.
中国境内天山上地幔小尺度对流与造山作用 总被引：2，自引：0，他引：2
根据横跨天山的流动地震台阵记录的走时数据, 利用地震层析成像技术获得了库车-奎屯剖面660 km深度内上地幔P波速度结构. 由P波速度模型导出了相应的上地幔二维密度模 型. 利用有限单元方法联合网格-粒子方法, 研究了中国境内天山由于密度差异分布引起的上地幔小尺度对流. 给出了对流的基本形态特征, 并分析了上地幔对流与造山作用的相互影响关系. 结果表明: (1) 北天山—准噶尔盆地下方的上地幔中存在一个逆时针对流环, 对流环尺度为500 km左右; (2) 南天山—塔里木盆地一侧的上地幔中存在一个顺时针对流环, 但相对较弱; (3) 上地幔对流速度值在很大程度上受黏滞系数变化的影响, 但天山上地幔顶部对流速度值不应小于20 mm/a; (4) 塔里木盆地向北的水平推挤作用是天山新生代隆升的决定性因素, 同时, 上地幔小尺度对流对天山现今构造变形格局也起着重要作用; (5) 塔里木板块向北的运动对上地幔对流场的影响很小. 相似文献
5.
6.
天山造山带一直以来是研究盆山耦合作用的理想场所，深入理解这一地区的壳幔结构对认识天山造山带深部动力学过程具有重要意义.本研究基于2009—2020年新疆区域数字地震台网固定台站、震后架设应急流动台站以及部分宽频带流动地震台站记录到的MS≥1.5地震到时资料，采用双差地震层析成像方法反演获得了新疆天山中段精细的地壳和上地幔顶部三维P波速度结构和地震震源参数.结果显示：新疆天山中段具有复杂的深浅构造关系，地壳浅部及上地壳P波速度结构与地表地质构造密切相关，高速异常区对应于天山造山带，低速异常区对应于沉积盆地.研究区中东段中地壳和下地壳存在较大范围低速区，与两侧准噶尔盆地和塔里木盆地上地壳和中地壳低速区相连，且准噶尔盆地和塔里木盆地下地壳及上地幔顶部双向均向新疆天山中段下方倾斜.结合前人诸多研究成果推测，在南北向构造挤压作用下，塔里木盆地与准噶尔盆地双向向天山造山带壳幔岩石圈发生“层间插入与俯冲削减”.重定位后地震分布显示，地震震源深度优势范围为0～25 km,主要沿断裂带、盆山结合部以及不同块体接触部位分布，且与壳内低速体有较好的相关性.这些结果可能为研究新疆天山中段... 相似文献
7.
塔里木盆地西南前陆构造分段及其成因 总被引：13，自引：0，他引：13
大量野外调查和地球物理资料构造解释发现, 塔里木盆地西南凹陷周边前陆盆地带具有沿前陆走向构造分段的规律性, 即在西昆仑-帕米尔和西南天山前陆发育了一系列相间分布的由山系向盆地逆冲的弧形推覆构造系统及由塔里木盆地西南凹陷向山系反冲的弧形反冲构造系统, 逆冲与反冲构造间以走滑或斜冲断层相隔; 塔西南凹陷基底的北东向隆起和凹陷与前陆构造分段具成因联系, 发现薄皮弧形推覆构造段对应基底构造上隆区(小于10 km), 塔里木盆地反冲构造段对应基底构造下凹区(大于8 km). 沿造山带走向隆升幅度和速率或变形格局的差异、前陆盆地多个沉降中心及巨厚沉积盖层、盆地基底构造中隆起带和凹陷带及前陆盆地沉积盖层中存在多层膏岩层等软弱层是塔西南盆地前陆构造分段产生的控制因素, 而晚第三纪以来西昆仑-帕米尔与西南天山再造山隆升与塔里木盆地基底构造深浅部不同耦合变形作用是塔里木盆地西南前陆构造分段的主因. 相似文献
8.
中国西南天山山前的晚新生代构造与地震活动 总被引：40，自引：0，他引：40
天山是研究现今陆内造山作用及过程、陆内变形、陆内强震及其预测等大陆动力学问题的理想实验场。西南天山和塔里木之间的新生代褶皱－逆断裂带基本上由一南冲弧形推覆构造系统和一向北反冲的构造系统组成，由北而南主要由以下4个运动学单元组成：（1）新生代复活的喀拉铁热克山－天山南脉古生代造山带，其快速变形和抬升可能起始于23－26Ma前，持续至13－16Ma前。（2）向南逆冲的西南天山前陆薄皮主冲断带，包括木兹杜克弧形薄皮推覆体和依柯冲断带，前者代表了向南薄皮逆掩的天山型岩系，地表主要表现为一系列的飞来峰群，在14Ma前曾有过大规模活动，最小缩短量约为20－35km，最小缩短速率为1．4－2．8mm/a；后者代表了向南叠瓦状薄皮逆冲推覆的前陆古生代基底（塔里木地台型沉积岩系）卷入构造，其西段在距今14Ma时曾有过强烈活动。两者共同组成了一复杂的双重构造；新生代地层也卷入变形。（3）喀什－阿图什弧形反冲褶皱－逆断裂带，由3排向北（天山）反冲的左阶雁列展布的第四纪地表滑脱褶皱组成，仅在大山口以西发育。该构造带形成于距今约1．4Ma以后。依什拉克喀拉乌尔断裂以南，博古孜河剖面的最小缩短速率约为5．8mm/a，翁库尔剖面的最小缩短速率约为8．6mm/a。（4）塔里木克拉通下盘块体，向北西方向缓倾，内部变形较小。里木块体西北存在明显的不均匀性，其学问基底高角度逆断裂和走滑断裂控制了盆地新生代沉积的厚度，导致西南天山前陆冲断带的地形地貌、地层、构造变形样式、变形时间以及变形缩短量沿走向的巨大差异性。迈丹－喀拉铁克断裂和阿图什断裂带均为岩石圈规模断裂，研究区的中强地震主要发生在这两条断裂带以及它们之间的西南天山前陆冲断带上。 相似文献
9.
博格达山链新生代抬升过程及意义 总被引：4，自引：0，他引：4
东天山的博格达-巴里坤山链是在晚古生代造山以及中生代伸展基础上于新生代强烈抬升而成,其新生代再造山和隆升是欧亚大陆地质史上的标志性重要事件,造就了东天山现今的盆山地貌格局.运用低温热年代学方法,通过系统批量采样,获得了博格达山链新生代抬升过程的3个明显阶段：5.6-19,20-30和42-47Ma,其中20-30Ma是最显著的一期隆升,而且是山链整体的统一隆升,这与西天山以及青藏高原北部同期的构造事件相似.因此,该期隆升意味着青藏高原向北扩展已经影响到了天山一线,同时获得隆升的起动时间为不晚于65Ma,其动力机制是否是印度-欧亚板块开始碰撞的响应目前还不清楚.裂变径迹结果表明,整个博格达-巴里坤山链在整个新生代的构造活动是分阶段的,各期之间具有整体抬升和差异抬升之分,而且沿山体的东西方向和南北方向上具有明显的差异性,表现为隆升由西向东和由北向南迁移,山体以向南的横向扩展为主要趋势.东天山新生代的3期构造事件与青藏高原尤其是高原北部构造事件都能比较好的对应,因此东天山新生代的构造事件很可能是青藏高原尤其是北部演化的响应. 相似文献
10.
柯坪塔格推覆体位于天山西南麓。新生代以来,由于印度板块与欧亚板块的碰撞,天山晚古生代褶皱和断裂构造重新复活隆起,并向南北两侧推挤,在前陆盆地中渐进式地形成多排褶皱-逆断裂带。文中讨论了皮羌近SN向断裂带以西推覆体的新生代变形与扩展特征。结果表明,推覆体的新生代变形为波浪式差异性隆起。从天山南侧到塔里木盆地方向,构成推覆体的各排褶皱-逆断裂带的形成顺序有先后之分,早期形成的靠近天山,晚期形成的靠近塔里木盆地,反映推覆体在形成过程中由北向南的扩展,其扩展距离最大约76km。除此之外,各排褶皱-逆断裂带前缘都由多条断裂组成,它们与褶皱伴生,具有不同的形成和新活动时代。早期形成的断裂靠近山地一侧,晚期形成的断裂靠近盆地一侧,反映褶皱-逆断裂带单排前缘断裂也具有由北向南扩展的性质,其扩展距离为100~500m。最后,对推覆体扩展的形成机制进行了讨论 相似文献
11.
帕米尔东北侧地壳结构研究 总被引：50，自引：17，他引：50
1998年在帕米尔东北侧伽师及其周边地区完成了两条深地震宽角反射/折射剖面. 结果表明,西昆仑、塔里木和天山在地壳速度结构、构造特征上显示出较大差异. 塔里木块体具有稳定地块的地壳结构特征,地壳平均速度较高(6.5km/s). 向南进入西昆仑,地壳明显增厚,厚度可达0km左右,且地壳平均速度偏低(6.0-6.2km/s),偏低的地壳平均速度主要来源于相对低速度的下地壳结构,反映了西昆仑褶皱系下地壳介质的特征. 向北进入天山后,地壳同样明显增厚,但增厚的程度低于西昆仑下,约为50-55km. 天山地壳同样具有明显低的平均速度(6.2km/s),显示了天山地壳相对"软"的特征,但天山地壳偏低的平均速度来源于广泛分布于中地壳的低速度层和速度偏低的下地壳. 在印度块体向北强烈推挤的作用下,该区地壳遭受强烈的不均匀变形,塔里木块体向南插入西昆仑下,向北插入天山下,形成了该区强烈地震频繁发生的深部构造环境. 相似文献
12.
Shear wave velocity structure of the crust and upper mantle underneath the Tianshan orogenic belt 总被引：9，自引：1，他引：9
LI Yu LIU QiYuan CHEN JiuHui LI ShunCheng GUO Biao & LAI YuanGen State Key Laboratory of Earthquake Dynamics Institute of Geology China Earthquake Administration Beijing China 《中国科学D辑(英文版)》2007,50(3):321-330
From April, 2003 to September, 2004, a passive broadband seismic array consisting of 60 stations was deployed over the Tianshan orogenic belt by State Key Laboratory of Earthquake Dynamics, Institute of Geology, China Earthquake Administration. Among them, 51 stations make up an about 500-km-long profile across the Tianshan Mountains from Kuytun to Kuqa. The receiver function profile and S-wave velocity structure of the crust and upper mantle down to 100 km deep are obtained by using the re-ceiver function method (Liu et al. 1996, 2000). The main results can be summarized as follows: (1) A clear mountain root does not exist beneath the Tianshan Mountains, and the crust-mantle boundaries underneath the stations mostly have transitional structures. This implies that the material differentia-tion between the crust and mantle is not yet accomplished and the orogenic process is still going on. (2) The crust beneath the Tianshan Mountains has laterally blocked structures in direction perpendicular to the mountain strike, and the crust-mantle boundary has a clear dislocation structure. Both of them correspond to each other. (3) The offsets of the Moho discontinuity are highly correlated to the tectonic borders on the surface and that corresponding to the frontal southern Tianshan fault reaches to 14 km. This manifests that large vertical divergent movement took place between different blocks. This sup-ports the discontinuous model of the Tianshan orogeny, and the Tarim block subduction is restricted only to the southern side of the South Tianshan. (4) Inside the upper and middle crust of the Tianshan Mountains exist several low-velocity bodies correlated with high seismicity located on the moun-tain-basin jointures on both sides of the mountain and between different blocks, and the low-velocity bodies on the mountain-basin jointures are inclined obviously to the mountain. This implies that the low-velocity bodies may be correlated closely to the thrust and subduction of the basins on both sides of the mountain, the splicing of adjacent blocks and the fast uplift of the Tianshan Mountains. 相似文献
13.
From April,2003 to September,2004,a passive broadband seismic array consisting of 60 stations was deployed over the Tianshan orogenic belt by State Key Laboratory of Earthquake Dynamics,Institute of Geology,China Earthquake Administration.Among them,51 stations make up an about 500-km-long profile across the Tianshan Mountains from Kuytun to Kuqa.The receiver function profile and S-wave velocity structure of the crust and upper mantle down to 100 km deep are obtained by using the receiver function method (Liu et al.1996,2000).The main results can be summarized as follows:(1) A clear mountain root does not exist beneath the Tianshan Mountains,and the crust-mantle boundaries underneath the stations mostly have transitional structures.This implies that the material differentiation between the crust and mantle is not yet accomplished and the orogenic process is still going on.(2)The crust beneath the Tianshan Mountains has laterally blocked structures in direction perpendicular to the mountain strike,and the crust-mantle boundary has a clear dislocation structure.Both of them correspond to each other.(3)The offsets of the Moho discontinuity are highly correlated to the tectonic borders on the surface and that corresponding to the frontal southern Tianshan fault reaches to 14 km.This manifests that large vertical divergent movement took place between different blocks.This supports the discontinuous model of the Tianshan orogeny,and the Tarim block subduction is restricted only to the southern side of the South Tianshan.(4)Inside the upper and middle crust of the Tianshan Mountains exist several low-velocity bodies correlated with high seismicity located on the mountain-basin jointures on both sides of the mountain and between different blocks,and the low-velocity bodies on the mountain-basin jointures are inclined obviously to the mountain.This implies that the low-velocity bodies may be correlated closely to the thrust and subduction of the basins on both sides of the mountain,the splicing of adjacent blocks and the fast uplift of the Tianshan Mountains. 相似文献
14.
JOINT INVERSION OF AMBIENT NOISE AND SURFACE WAVE FOR S-WAVE VELOCITY OF THE CRUST AND UPPERMOST MANTLE BENEATH WEIHE BASIN AND ITS ADJACENT AREA 
下载免费PDF全文
下载免费PDF全文 The Weihe Basin is the main component of the extrusion and escape shear zone between the ancient North China craton block in Ordos and the ancient Yangtze platform in Sichuan Basin, and carries the dynamic transmission from the main power source of the Qinghai-Tibet Block in the west to the North China and South China regions in the east. The basin itself plays multi roles in the east-west and north-south tectonic movement, and is an excellent site for studying the structural interlacing, dynamic transformation and transmission. At the same time, Weihe Basin is also a famous strong earthquake zone in China. Historically, there was a strong earthquake of magnitude 8 1/4 occurring in Huaxian County in 1556, causing huge casualties and property losses. In view of the special geological structures and the characteristics of modern seismicity activities in the Weihe fault-depression zone, it is necessary to carry out fine three-dimensional velocity structure detection in the deep part of Weihe Basin and its adjacent areas, so as to study the relationship between velocity structure and geological structural units and their evolution process, as well as the deep medium environment where earth￣quakes develop and occur.
We investigate the S-wave velocity structure beneath Weihe Basin and its adjacent regions based on continuous background noise data and teleseismic data recorded by 257 broadband stations in Shaanxi Province and its adjacent regions and China Seismological Science Array Exploration Project, and by adopting seismic surface wave inter-station method and background noise cross-correlation method, a total of 10 049 fundamental-mode Rayleigh surface wave phase velocity dispersion curves in the periods of 5~70s are obtained. Firstly, using the average dispersion curve in this study area, we obtain the one-dimensional average S-wave velocity structure model of the study area, and then we apply the ray-tracing surface-wave-dispersion direct inversion method to obtain the S-wave velocity structure of the crust and uppermost mantle (3~80km) beneath Weihe Basin and its adjacent regions. The test results of a 1°×1° grid checker board show that the recovery is good, except for the areas east of 111° and south of 32° of the study area, where there is almost no resolution. The imaging results show that the velocity structure beneath each tectonic unit in the study area has a certain distribution rule, and there is a good correlation between surface geological structure and deep velocity structure.
Based on the analysis of velocity slices at different depths and S-wave velocity structures of three profiles, and combined with existing geological structures, geophysics and other deep exploration research results, we obtain the following knowledge and conclusions:1)The thick sedimentary layer covering the top of Weihe Basin is the cause of low velocity anomaly in its shallow crust, the middle and upper crust of the basin are of low velocity structure, and the low-velocity zone extends about 25km, the Moho interface uplifts abruptly relative to both the Ordos Block and the Qinling orogenic belt on opposite sides, and high-speed materials from the upper mantle intrude into the lower crust, which may be related to the underplating of mafic-ultramafic materials from the upper mantle in Mesozoic-Cenozoic period; 2)The south Ordos Block is not a homogeneous whole, the low-velocity structure of the shallow crust in southern Ordos Block is thin in east and thick in west, which may be related to the overall tilting of the Ordos Basin since the Phanerozoic, as well as the differential uplift and strong and uneven denudation of the Ordos Block since the Late Cretaceous. The crustal structure of the south Ordos Block is relatively simple and homogeneous. There is no significant low-velocity structure in the curst of the block, which shows that the low-velocity structure in the crust does not penetrate the whole Ordos block. We speculate that the southern Ordos Block still maintains the stable craton property, and has not been reformed significantly so far; 3)The variation characteristics of deep structure of the Qinling orogenic belt reflect the deep crustal structure and tectonic deformation characteristics of the orogenic belt which are strongly reformed by land-land collision and suture between North China plate and Yangtze plate, intracontinental orogeny, uplift of Qinghai-Tibet Plateau and its northeastern expansion since the Late Hercynian-Indosinian period. The deep structure beneath the eastern and western Qinling orogenic belt is different and has the characteristics of segmentation. The low-velocity anomaly at the bottom of the lower crust of the orogenic belt may be affected by tectonic activities such as uplift and outward extension of the NE Tibetan plateau, and the analysis considers that there is little possibility of the existence of lower crustal circulation channel for the eastward flowing of Tibetan plateau materials in the Qinling orogenic belt. However, since the maximum depth from the inversion of this paper is 80km, which is located at the top of the upper mantle, our results cannot prove that there exists a mantle flow channel for the eastward flow of Tibetan plateau material beneath the Qinling orogenic belt. 相似文献
15.
沿乌鲁木齐－库尔勒３５０余公里长的测线上完成了穿越天山的地震转换波野外观测，得出天山造山带的深部构造剖面图和壳内Ｐ，Ｓ波速度结构模型．天山的结晶地壳可分为４层，各层的速度分别是：Ｖｐ值为５．９，６．３，６．６，６．９ｋｍ／ｓ；Ｖｓ值为３．２，３．５，３．７，３．９ｋｍ／ｓ。上地幔顶部的波速：Ｖｐ值为８．１０ｋｍ／ｓ。Ｖｓ值为４．６ｋｍ／ｓ。天山地区的地壳厚度为４２－５６ｋｍ，中天山最厚，达到５０－５６ｋｍ。地壳中部存在低速透镜体。探测结果表明，天山大地构造可分为北天山、中天山和南天山３个区，其地壳深部构造特征各不相同。用颤动构造理论来解释天山造山带的形成机制和演化较板块构造理论更为合理。 相似文献
16.
沿乌鲁木齐－库尔勒３５０余公里长的测线上完成了穿越天山的地震转换波野外观测，得出天山造山带的深部构造剖面图和壳内Ｐ，Ｓ波速度结构模型．天山的结晶地壳可分为４层，各层的速度分别是：Ｖｐ值为５．９，６．３，６．６，６．９ｋｍ／ｓ；Ｖｓ值为３．２，３．５，３．７，３．９ｋｍ／ｓ。上地幔顶部的波速：Ｖｐ值为８．１０ｋｍ／ｓ。Ｖｓ值为４．６ｋｍ／ｓ。天山地区的地壳厚度为４２－５６ｋｍ，中天山最厚，达到５０－５６ｋｍ。地壳中部存在低速透镜体。探测结果表明，天山大地构造可分为北天山、中天山和南天山３个区，其地壳深部构造特征各不相同。用颤动构造理论来解释天山造山带的形成机制和演化较板块构造理论更为合理。 相似文献
17.
天山造山带是新生代以来复活隆升的陆内造山带，强烈的地震活动性使得理解和认识天山造山带深部结构及盆山耦合关系尤为重要。文章中使用天山造山带及邻区(40°～49°N,79°～93°E)85个台站2017—2019年的背景噪声资料，结合背景噪声互相关方法获得了6～52 s瑞利波相速度频散曲线，利用基于射线追踪的面波直接反演法对天山中段地壳三维S波速度结构及盆山耦合关系进行研究。结果显示：地壳浅层S波速度分布与构造单元中沉积层厚度相关，塔里木盆地北缘、准噶尔盆地南缘表现为低速，天山造山带表现为高速；到了中下地壳，天山造山带下方存在被高速异常包裹的低速体；莫霍面附近，天山造山带表现出相对低速；准噶尔盆地南缘和天山造山带的地壳厚度分别在45～50 km、50～62 km之间，沿南北向，天山造山带莫霍面呈现较为宽缓的形态；在82°～86.5°E之间，塔里木盆地和准噶尔盆地向天山下方双向俯冲，86.5°～88°E之间，准噶尔盆地向天山南向俯冲，由西向东，不同盆山耦合关系揭示了新生代以来天山中段不同区域构造运动差异，为进一步探讨造山动力过程提供参考。 相似文献
18.
对包含大别－苏鲁碰撞造山带在内的东经 １１２°－１２４°,北纬２８°－３９°区域进行地 震层析成像研究,重建其地壳及上部地幔的三维速度图像．结果表明：造山带岩石圈速度横 向不均匀性显著;大别造山带以商城－麻城断裂为界,东侧的大别地块与西侧红安地块在地 壳速度上是两个不同的速度块体;中地壳 １５-２５ｋｍ深度范围内存在低速带,与伸展滑脱构造 有关;南、北大别构造单元之下,莫霍面下凹,地壳内发育了速度为６．５－６．６ｋｍ／ｓ、向北倾斜的 相对高速体,与超高压变质岩体相对应;在大别－苏鲁造山带下方的上部地幔中存在向北倾 斜的板片状高速体,结合已有地质、地球化学证据推测,它是三叠纪俯冲的扬子地块的残留 体;俯冲板片在深部发生了断离．本文利用地震层析成像方法揭示的造山带岩石圈速度结构 细节,对研究与地表地质有关的地球动力学无疑是十分重要的． 相似文献
19.
西南天山-塔里木盆地结合带浅深构造关系 ——深地震反射剖面的初步揭露 总被引：4，自引：0，他引：4
盆山结合部的浅-深结构样式是进行陆内造山动力学研究与讨论的重要依据.2007年,在喀什东的天山与塔里木盆地之间的过渡带上,完成了一条近南北向的长度为121 km的主动源深地震反射剖面,显示出盆山结合部现今地壳尺度的构造格架.剖面南部呈现出10~12 km巨厚的沉积盖层,沉积盖层内发育滑脱断层;盆山结合部多排隆起构造以及天山山前上地壳显现出向北倾斜的断裂与地表地质观察吻合;盆山结合带展现出滑脱与逆冲推覆构造相关的断层褶皱;与塔里木盆地稳定沉积层相比,在南天山浅、中层地层受到强烈的变形改造,导致地层比较破碎,反射变弱、连续性较差;时间剖面上可以追踪到比较连续的Moho反射,从南向北有加深的趋势.深地震反射剖面揭露出的西南天山与塔里木盆地的这些浅-深构造,展现出塔里木盆地盖层向南天山滑脱与南天山向塔里木盆地逆冲推覆的特征,反映出陆内汇聚下的盆山耦合关系. 相似文献
20.
Bin Zhang Wen Chen JingBo Sun Shun Yu JiYuan Yin Jie Li Yan Zhang XinYu Liu Li Yang Xia Yuan 《中国科学:地球科学(英文版)》2016,59(2):349-361
The uplift and exhumation process in the Tianshan orogen since the late Paleozoic were likely related to the preservation of ore deposits. This study involved reconstructing the whole tectonic thermal history of the Ouxidaban pluton in central South Tianshan Mountains based on hornblende/plagioclase Ar-Ar and zircon/apatite(U-Th)/He methods. The thermal history and uplift process of central South Tianshan Mountains since the late Paleozoic were analyzed according to the results of previous works and cooling/exhumation rate features. The hornblende yields a plateau age of 382.6±3.6 Ma, and the plagioclase yields a weighted mean age of 265.8±4.9 Ma. The Ouxidaban pluton yields weighted mean zircon(U-Th)/He age of 185.8±4.3 Ma and apatite(U-Th)/He age of 31.1±2.9 Ma, respectively. Five stages of tectonic thermal history of South Tianshan Mountains since the late Paleozoic could be discriminated by the cooling curve and modeling simulation:(1) from the latest Silurian to Late Devonian, the average cooling rate of the Ouxidaban pluton was 7.84°C/Ma;(2) from the Late Devonian to the latest Middle Permian, the average cooling rate was about 2.07°C/Ma;(3) from the latest Middle Permian to the middle Eocene, the cooling rate decreased to about 0.68°C/Ma, suggesting that the tectonic activity was gentle at this time;(4) a sudden increase of the cooling rate(5.00°C/Ma) and the exhumation rate(0.17 mm/a), and crustal exhumation of ~1.83 km indicated that the Ouxidaban pluton would suffer a rapid uplift event during the Eocene(~46?35 Ma);(5) since the middle Eocene, the rapid uplift was sustained, and the average cooling rate since then has been 1.14°C/Ma with an exhumation rate of about 0.04 mm/a and an exhumation thickness of 1.33 km. The strong uplift since the Cenozoic would be related to a far-field effect from the Indian and Eurasian plates' collision. However, it was hysteretic that the remote effect was observed in the Tianshan orogenic belt. 相似文献