共查询到18条相似文献，搜索用时 156 毫秒
1.
传统低层建筑砌体结构动力特性分析中,易受到外界环境的干扰,砌体结构的完整性欠缺,导致动力特性分析的准确度较低。为提高低层建筑砌体结构的抗震性能,提出地震作用下低层建筑砌体结构的动力特性分析方法。首先利用低层建筑砌体结构反应自功率谱,完成砌体结构的自振频率辨认;然后通过941B型超低频率测振仪测试自振频率,筛出振动波形中噪声干扰的区域,获取时域波形和频域波形;最后依据时域波形和频域波形塑造低层建筑砌体三维精细化模型,在该模型基础上,通过子空间迭代算法获取低层建筑砌体结构的模拟结果,分析地震作用下芯柱、圈梁等构造措施对建筑砌体结构动力特征的影响,完成砌体结构的动力特性分析。实验结果表明,利用所提方法对地震作用下低层建筑砌体结构的动力特性进行分析,得到的分析结果准确度较高。 相似文献
2.
传统钢结构建筑钢板外部震动下承载力分析方法,是基于总体钢板结构以及受力特征,获取载荷同振动频率间的关系,实现承载力的分析,并未对钢板同混凝土间的应力-应变关系进行分析,导致分析结果存在较高的偏差。提出新的钢结构建筑钢板外部震动下承载力有限元分析方法,将钢结构建筑钢板横截面简化成混凝土的矩形截面和波纹钢板的工字形梁截面,采用ANSYS有限元软件中的CONTACI2接触单元仿真分析钢板同混凝土两者的影响,分析混凝土及钢板的应力-应变关系、界面模块的应力-滑移关系,采用力平衡迭代法获取外部震动下钢板荷载增量;在上述基础工作上采用有限元软件,对外部震动下钢结构建筑钢板实施有限元接触单元建模及承载力分析。实验结果表明,该方法能够实现钢结构建筑钢板外部震动下承载力有限元分析,并且分析结果具有准确性高和效率高的优点。 相似文献
3.
基于损伤塑性模型的砌体墙体非线性有限元分析 总被引：2，自引：0，他引：2
为了研究砌体墙体用钢结构加固后的力学性能,需要提供较准确的砌体墙体非线性计算,考虑到砌体与混凝土的材料性质具有相似性,将混凝土损伤塑性模型经修正后应用于砌体数值模拟,实现对砌体墙体的非线性有限元分析。通过与水平加载试验结果对比,验证了有限元模型的正确性。探讨了损伤塑性模型中的粘性系数、膨胀角、砌体本构关系中的初始弹性模量、受拉应力应变关系对计算结果的影响。结果表明：粘性系数和膨胀角对抗剪承载力、峰值位移及下降段性能均有较大影响,而对初始刚度影响很小;随着初始弹性模量的增大,砌体墙体抗剪承载力随之提高,但峰值位移无明显变化;受拉应力应变方程中待定系数的取值,对抗剪承载力及峰值位移影响较大。 相似文献
4.
当前地震记录法检测中强震下砌体结构损伤时,基于已知砌体结构地震动记录实施损伤检测存在较高的局限性。提出新的中强震下砌体结构损伤检测方法,利用DASP动态测试分析仪和891型的压电式位移传感器,检测拟静力试验后的砌体结构模型,采用参数互补校正方法得到受损砌体结构的自振频率和振型检测,通过有限元分析获取砌体结构位移,依据频率和位移采用信号匹配方法检测砌体结构损伤情况,根据墙体刚度变化检测中强震下砌体结构的损伤程度。实验证明所提方法可对中强震下砌体结构损伤情况进行准确检测。 相似文献
5.
为探讨村镇建筑低层砌体结构在大震下的动力响应及损伤分布情况,基于农居结构性能实地调查与检测,在有限元软件ABAQUS中建立了不同抗震构造措施的砌体结构有限元模型,并进行结构动力特性及大震下弹塑性时程的分析,对比它们的自振特性参数、位移响应参数及损伤破坏形态。分析表明,低层砌体结构合理设置构造柱后结构自振周期略有减小,但振型不变;在弹性变形阶段构造柱能有效约束结构的动力位移响应,进入塑性变形后构造柱可提高砌体结构的耗能能力,但值得注意的是,结构刚度退化后构造柱会加剧纵横向抗侧刚度的不均衡性;低层砌体结构合理设置圈梁构造柱可有效抑制承重横墙的裂缝发展及楼屋盖发生支座失效破坏,且可以明显削弱结构的扭转效应。 相似文献
6.
免蒸压免烧结粉煤灰多孔砖砌体力学性能试验研究 总被引：5，自引：0，他引：5
免蒸压免烧结粉煤灰多孔砖是一种新型承重墙体材料,为使其在地震区村镇建筑中得到推广应用,进行了多孔砖砌体抗压强度和抗剪强度试验,分析了砌体裂缝开展及破坏过程。试验结果表明:免蒸压免烧结粉煤灰多孔砖砌体的受压、受剪破坏过程及特征与普通黏土砖砌体类似,但具有更大的脆性;抗压、抗剪强度均小于普通黏土砖砌体;采用6次多项式的受压本构关系数学模型,反映了免蒸压免烧结粉煤灰多孔砖砌体受压应力-应变全过程,计算值与实测数据比较接近。 相似文献
7.
利用ABAQUS软件对既有的砌体墙试验结果进行了数值模拟,验证了模型的正确性以及混凝土损伤塑性模型对模拟砌体结构受力性能的可用性。在此基础上,借助实地调查获得的结构参数和材料性能数据,以重庆典型农居建筑为例,建立了无筋砌体农居的三维有限元模型,对数值模型进行了动力特性分析和不同烈度下多遇及罕遇地震的动力弹塑性时程分析,并建议了无筋砌体结构农居在不同地震烈度破坏下墙体表面积受拉损伤率的临界值。最后,利用既有文献提出的层间位移角限值,分析了该农居的破坏程度,比较了墙体表面积受拉损伤率和层间位移角限值衡量砌体结构的破坏程度。分析结果表明:提出的墙体表面积受拉损伤率和层间位移角限值衡量砌体结构破坏程度吻合良好;当墙体表面积受拉损伤率小于1%时,结构轻微破坏;当位于1%~5%时,发生中等程度破坏;当位于5%~30%时,发生严重破坏;当大于30%时,结构倒塌。 相似文献
8.
高耸进水塔结构在地震作用下的动态响应分析 总被引：2，自引：0，他引：2
针对低周往返地震作用下的应力释放和应力调整规律,引入动态接触单元,采用El Centro地震动时程分析法,研究了接触非线性问题的高耸结构动态接触分析方法。对比分析弹性连接和动态接触方法的差异性,针对进水塔相互作用体系动力特性及响应影响规律进行讨论,将该模拟方法应用到5·12汶川地震作用下的紫坪铺1#泄洪塔工程。分析认为：考虑动态接触更符合地震作用下进水塔的实际受力情况;振动位移、速度、加速度更多地取决于地基特性,受上部结构刚度变化的影响不大;该塔体的整体稳定性可以保证,与震后复核结果相符。采用动态接触研究进水塔-岩体联合动力相互作用是十分必要的。 相似文献
9.
针对隧道的抗震安全性,借助有限元软件平台对其地震时程响应进行非线性有限元分析。利用弹性模型考虑混凝土隧道在循环荷载作用下的拉、压应力-应变关系,同时对土体采用MohrCoulomb模型,选用人工边界作为边界条件,以人工合成的多点地震加速度时程作为地震动输入,分别考虑一致输入、行波效应、相干效应及行波加相干效应对隧道的影响。分析结果表明,与一致激励的计算结果相比,非一致地震激励会显著增加隧道结构的内力和位移响应,从而对隧道抗震产生不利影响。研究结论可为长隧道结构的抗震设计和分析提供科学依据。 相似文献
10.
11.
砌体建筑群在地震中往往破坏严重损失巨大,合理评估地震作用对不同种类砌体结构造成破坏的风险变得至关重要。传统基于后验概率的地震危险性分析方法忽略了砌体建筑个体差异性的影响,未深入考虑多种震害因子的耦合作用。本文以华南地区砌体建筑群为例,开发了一种集成概率方法来对城市砌体结构的破坏风险进行建模,考虑建筑年代、层数、使用用途和墙厚四类震害因子的耦合影响,采用(Kolmogorov-Smirnov)K-S检验,在设定地震动参数下选取Gaussian分布、Log-Normal分布、Gumbel分布和Beta分布四种概率分布对该地区砌体建筑物的破坏状态概率分布参数进行拟合。通过均方根误差(Root Mean Square Error)RMSE进行拟合优度评价,最终建立基于Gaussian分布和Log-Normal分布的砌体建筑物破坏联合概率模型。最后,以华南地区三个城市典型砌体建筑物为例进行实例对比验证,将基于本文建立的建筑破坏概率模型推算出的砌体建筑群震害矩阵与基于单体结构分析得到的震害矩阵进行对比,与理论值最大偏差为0.033 3。研究表明：本文构建的集成概率方法能够获得更加合理的城市砌体建筑... 相似文献
12.
The seismic performance assessment of existing masonry buildings involves many uncertainties, whose impact can be reduced to some extent by using non-destructive in-situ tests of such buildings, at least when destructive in-situ tests, which can provide more reliable results, cannot be performed. In this paper the extent of the potential beneficial effects achievable by calibration of a structural model of a building to its experimentally estimated vibration periods has been investigated. This was done by performing measurements of ambient and forced vibrations on an old two-storey masonry building, and by then assessing its seismic performance using a simplified nonlinear method. The results of numerical investigations revealed that the natural vibration periods of such buildings can be reproduced with sufficient accuracy, although it is possible that they will be overestimated or underestimated by analysts by up to around 40 %. This means that the accuracy of the prediction of the intermediate results of the seismic performance assessment of any particular building can be significantly increased by calibration of the structural model. Additionally, the beneficial effects of such calibration were observed even in the case of the final outcome of the nonlinear analysis, which is expressed through the near-collapse limit state capacity in terms of the peak ground acceleration. 相似文献
13.
针对我国农居结构中比例最高的砖木结构,选取典型结构运用ABAQUS有限元软件进行模态和地震时程弹塑性分析。给出M0.5和M5两种砌筑强度砖木结构农居的前三阶特征周期和振型,并与经验周期公式值进行对比分析,提出后者存在的问题和修改建议。选取天津波作为地震动时程输入,分别计算不同峰值加速度下两种砖木结构农居弹塑性地震反应,给出相应的拉损伤云图,并对结构的破坏特征进行分析,给出结构抗震薄弱部位。结果表明,砌筑强度是决定结构抗震能力的关键因素之一。 相似文献
14.
Many historic buildings in old urban centers in Eastern Canada are made of stone masonry reputed to be highly vulnerable to seismic loads.Seismic risk assessment of stone masonry buildings is therefore the first step in the risk mitigation process to provide adequate planning for retrofit and preservation of historical urban centers.This paper focuses on development of analytical displacement-based fragility curves reflecting the characteristics of existing stone masonry buildings in Eastern Canada.The old historic center of Quebec City has been selected as a typical study area.The standard fragility analysis combines the inelastic spectral displacement,a structure-dependent earthquake intensity measure,and the building damage state correlated to the induced building displacement.The proposed procedure consists of a three-step development process:(1) mechanics-based capacity model,(2) displacement-based damage model and(3) seismic demand model.The damage estimation for a uniform hazard scenario of 2% in 50 years probability of exceedance indicates that slight to moderate damage is the most probable damage experienced by these stone masonry buildings.Comparison is also made with fragility curves implicit in the seismic risk assessment tools Hazus and ELER.Hazus shows the highest probability of the occurrence of no to slight damage,whereas the highest probability of extensive and complete damage is predicted with ELER.This comparison shows the importance of the development of fragility curves specific to the generic construction characteristics in the study area and emphasizes the need for critical use of regional risk assessment tools and generated results. 相似文献
15.
Comparison between seismic vulnerability models and experimental dynamic properties of existing buildings in France 总被引：4，自引：3，他引：1
Elastic fundamental frequency is a key-parameter of simplified seismic design and vulnerability assessment methods. Empirical
relationships exist in codes to estimate this frequency but they miss experimental data to validate them accounting for national
feature of building design and, above all, corresponding uncertainties. Even if resonance frequency extracted from ambient
vibrations may be larger than the elastic frequency (at yield) generally used in earthquake engineering, ambient vibration
recordings may provide a large set of data for statistical analysis of periods versus building characteristics relationships.
We recorded ambient vibrations and estimated the fundamental frequency of about 60 buildings of various types (RC and masonry)
in Grenoble City (France). These data complete the set existing yet, made of 26 RC-buildings of Grenoble (Farsi and Bard 2004)
and 28 buildings in Nice (France) (Dunand 2005). Statistical analysis of these experimental data was performed for fundamental
frequencies of RC shear wall structures and the results are compared with existing relationships. Only building height or
number of stories has a statistical relevancy to estimate the resonance frequency but the variability associated to the proposed
relationships is large. Moreover, we compared the elastic part of capacity curves of RC and masonry buildings used in the
European Risk-UE method for vulnerability assessment with the experimental frequencies. The variability is also large and
the curves may not be consistent with French existing buildings. 相似文献
16.
On 3 August 2014, the Ludian earthquake struck northwest Yunnan Province with a surface wave magnitude of 6.5. This moderate earthquake unexpectedly caused high fatalities and great economic loss. Four strong motion stations were located in the areas with intensity V, VI, VII and IX, near the epicentre. The characteristics of the ground motion are discussed herein, including 1) ground motion was strong at a period of less than 1.4 s, which covered the natural vibration period of a large number of structures; and 2) the release energy was concentrated geographically. Based on materials collected during emergency building inspections, the damage patterns of adobe, masonry, timber frame and reinforced concrete (RC) frame structures in areas with different intensities are summarised. Earthquake damage matrices of local buildings are also given for fragility evaluation and earthquake damage prediction. It is found that the collapse ratios of RC frame and confined masonry structures based on the new design code are significantly lower than non-seismic buildings. However, the RC frame structures still failed to achieve the ‘strong column, weak beam’ design target. Traditional timber frame structures with a light infill wall showed good aseismic performance. 相似文献
17.
Fillitsa V. Karantoni George Bouckovalas 《Soil Dynamics and Earthquake Engineering》1997,16(2):141-150
On March 1993 an earthquake of magnitude Ms = 5·5 shook Pyrgos, a town in Western Peloponnissos, one of the most seismic prone areas in Greece. The damage induced to modern reinforced concrete buildings was rather light in contrast to the damage induced to historic and traditional buildings of adobe, stone or brick masonry which was severe. In order to study the causes of structural damage, detailed data are collected from a rather large statistical sample of 1023 masonry buildings and 22 reinforced concrete framed buildings with visible damage. For each building the number of storeys, the material of construction, as well as the type and the degree of damage are recorded. In addition, consideration is given to the site of the building within the town and the corresponding soil conditions. For reinforced concrete buildings, damage occured mostly in areas with relatively high estimated spectral accelerations and fundamental soil periods of vibration close to those of the buildings. Nevertheless, further analysis is required to explain the selective damage of a very small number of buildings. For masonry houses, the effect of soil conditions is more systematic. Moreover, the effects of the number of storeys as well as the age and material of construction appear to be dominant. 相似文献
18.
The paper describes the earthquake performance assessment of two historical buildings located in Istanbul exposed to a Mw = 7+ earthquake expected to hit the city and proposes solutions for their structural rehabilitation and/or strengthening.
Both buildings are unreinforced clay brick masonry (URM) structures built in 1869 and 1885, respectively. The first building
is a rectangular-shaped structure rising on four floors. The second one is L-shaped with one basement and three normal floors
above ground. They survived the 1894, Ms = 7.0 Istanbul Earthquake, during which widespread damage to URM buildings took place in the city. Earthquake ground motion
to be used in performance assessment and retrofit design is determined through probabilistic and deterministic seismic hazard
assessment. Strength characteristics of the brick walls are assessed on the basis of Schmidt hammer test results and information
reported in the literature. Dynamic properties of the buildings (fundamental vibration periods) are measured via ambient vibration
tests. The buildings are modelled and analyzed as three-dimensional assembly of finite elements. Following the preliminary
assessment based on the equivalent earthquake loads method, the dynamic analysis procedure of FEMA 356 (Pre-standard and commentary
for the seismic rehabilitation of buildings, American Society of Civil Engineers, Reston, 2000) and ASCE/SEI 41-06 (Seismic rehabilitation of existing buildings, American Society of Civil Engineers, Reston, 2007) is followed to obtain dynamic structural response of the buildings and to evaluate their earthquake performance. In order
to improve earthquake resistance of the buildings, reinforced cement jacketing of the main load carrying walls and application
of fiber reinforced polymer bands to the secondary walls are proposed. 相似文献