共查询到20条相似文献，搜索用时 31 毫秒
1.
Techniques to reduce the time needed to carry out 3D resistivity surveys with a moderate number (25 to 100) of electrodes and the computing time required to interpret the data have been developed. The electrodes in a 3D survey are normally arranged in a square grid and the pole-pole array is used to make the potential measurements. The number of measurements required can be reduced to about one-third of the maximum possible number without seriously degrading the resolution of the resulting inversion model by making measurements along the horizontal, vertical and 45° diagonal rows of electrodes passing through the current electrode. The smoothness-constrained least-squares inversion method is used for the data interpretation. The computing time required by this technique can be greatly reduced by using a homogeneous half-space as the starting model so that the Jacobian matrix of partial derivatives can be calculated analytically. A quasi-Newton updating method is then used to estimate the partial derivatives for subsequent iterations. This inversion technique has been tested on synthetic and field data where a satisfactory model is obtained using a modest amount of computer time. On an 80486DX2/66 microcomputer, it takes about 20 minutes to invert the data from a 7 by 7 electrode survey grid. using the techniques described below, 3D resistivity surveys and data inversion can be carried out using commercially available field equipment and an inexpensive microcomputer. 相似文献
2.
Resistivity monitoring surveys are used to detect temporal changes in the subsurface using repeated measurements over the same site. The positions of the electrodes are typically measured at the start of the survey program and possibly at occasional later times. In areas with unstable ground, such as landslide‐prone slopes, the positions of the electrodes can be displaced by ground movements. If this occurs at times when the positions of the electrodes are not directly measured, they have to be estimated. This can be done by interpolation or, as in recent developments, from the resistivity data using new inverse methods. The smoothness‐constrained least squares optimisation method can be modified to include the electrode positions as additional unknown parameters. The Jacobian matrices with the sensitivity of the apparent resistivity measurements to changes in the electrode positions are then required by the optimisation method. In this paper, a fast adjoint‐equation method is used to calculate the Jacobian matrices required by the least squares method to reduce the calculation time. In areas with large near‐surface resistivity contrasts, the inversion routine sometimes cannot accurately distinguish between electrode displacements and subsurface resistivity variations. To overcome this problem, the model for the initial time‐lapse dataset (with accurately known electrode positions) is used as the starting model for the inversion of the later‐time dataset. This greatly improves the accuracy of the estimated electrode positions compared to the use of a homogeneous half‐space starting model. In areas where the movement of the electrodes is expected to occur in a fixed direction, the method of transformations can be used to include this information as an additional constraint in the optimisation routine. 相似文献
3.
N.G. Papadopoulos P. Tsourlos C. Papazachos G.N. Tsokas A. Sarris J.H. Kim 《Geophysical Prospecting》2011,59(3):557-575
In this work a new algorithm for the fast and efficient 3D inversion of conventional 2D surface electrical resistivity tomography lines is presented. The proposed approach lies on the assumption that for every surface measurement there is a large number of 3D parameters with very small absolute Jacobian matrix values, which can be excluded in advance from the Jacobian matrix calculation, as they do not contribute significant information in the inversion procedure. A sensitivity analysis for both homogeneous and inhomogeneous earth models showed that each measurement has a specific region of influence, which can be limited to parameters in a critical rectangular prism volume. Application of the proposed algorithm accelerated almost three times the Jacobian (sensitivity) matrix calculation for the data sets tested in this work. Moreover, application of the least squares regression iterative inversion technique, resulted in a new 3D resistivity inversion algorithm more than 2.7 times faster and with computer memory requirements less than half compared to the original algorithm. The efficiency and accuracy of the algorithm was verified using synthetic models representing typical archaeological structures, as well as field data collected from two archaeological sites in Greece, employing different electrode configurations. The applicability of the presented approach is demonstrated for archaeological investigations and the basic idea of the proposed algorithm can be easily extended for the inversion of other geophysical data. 相似文献
4.
A. J. Zhang E. R. G. Hill B. A. Hobbs 《Physics of the Earth and Planetary Interiors》1990,60(1-4):40-52
An important stage in two-dimensional magnetotelluric modelling is the calculation of the Earth's response functions for an assumed conductivity model and the calculation of the associated Jacobian relating those response functions to the model parameters. The efficiency of the calculation of the Jacobian will affect the efficiency of the inversion modelling. Rodi (1976) produced all the Jacobian elements by inverting a single matrix and using an approximate first-order algorithm. Since only one inverse matrix required calculation the procedure speeded up the inversion. An iterative scheme to improve the approximation to the Jacobian information is presented in this paper. While this scheme takes a little longer than Rodi's algorithm, it enables a more accurate determination of the Jacobian information. It is found that the Jacobian elements can be produced in 10% of the time required to calculate an inverse matrix or to calculate a 2D starting model. A modification of the algorithm can further be used to improve the accuracy of the original inverse matrix calculated in a 2D finite difference program and hence the solution this program produces. The convergence of the iteration scheme is found to be related both to the originally calculated inverse matrix and to the change in the newly formed matrix arising from perturbation of the model parameter. A ridge regression inverse algorithm is used in conjunction with the iterative scheme for forward modelling described in this paper to produce a 2D conductivity section from field data. 相似文献
5.
利用共轭梯度法的电阻率三维反演研究 总被引：72，自引：22，他引：50
利用共轭梯度（ＣＧ）迭代技术,实现了直流电阻率测量数据的三维最小构造反演。 首先,运用共轭梯度迭代算法解反问题的线性方程组,只需求Ｊａｃｏｂｉａｎ矩阵Ｇ与任一向量ｘ的 乘积Ｇｘ及ＧＴ与任何一向量ｙ的乘积ＧＴｙ,再引入Ｇ的Ｒｏｄｉ算法,则Ｇｘ及ＧＴｙ均可在每次反 演迭代中的一次正演计算后一并求得．因此,每次反演迭代仅需一次正演计算,大大加快了 计算速度;而且避免了直接求 Ｇ以及 ＧＴＧ的逆矩阵,也避免了存储 Ｇ和 ＧＴＧ所需庞大的存储 量。另外,由于反演参数太多,求模型光滑约束的最小构造反演能够有效地消除多余构造信 息,得到可靠的反演结果。将这３种方法和技术融合于三维反演中,取得了好的反演效果．为 改进传统最小构造反演收敛慢的问题,还提出了一种新的反演迭代技术,仅需１０次左右甚至 更少迭代即可收敛。 相似文献
6.
Raghu K. Chunduru Mrinal K. Sen Paul L. Stoffa R. Nagendra 《Geophysical Prospecting》1995,43(8):979-1003
The inversion of resistivity profiling data involves estimation of the spatial distribution of resistivities and thicknesses of rock layers from the apparent resistivity data values measured in the field as a function of electrode separation. The drawbacks of using traditional curve-matching techniques to solve this inverse problem have been overcome by iterative linear techniques but these require good starting models even if the shape of the causative body is asssumed known. In spite of the recent developments in inversion techniques, no robust method exists for the inversion of resistivity profiling data for the simple model of dikes and spheres which are the classical models of geophysical prospecting. We apply three different non-linear inversion schemes to invert synthetic resistivity profiling data for the classical models embedded in a uniform matrix of contrasting resistivity. The three non-linear algorithms used are called the Metropolis simulated annealing (SA), very fast simulated annealing (VFSA) and a genetic algorithm (GA). We compare the performance of the three algorithms using synthetic data for an outcropping vertical dike model. Although all three methods were successful in obtaining optimal solutions for arbitrary starting models, VFSA proved to be computationally the most efficient. 相似文献
7.
To improve the inversion accuracy of time-domain airborne electromagnetic data, we propose a parallel 3D inversion algorithm for airborne EM data based on the direct Gauss–Newton optimization. Forward modeling is performed in the frequency domain based on the scattered secondary electrical field. Then, the inverse Fourier transform and convolution of the transmitting waveform are used to calculate the EM responses and the sensitivity matrix in the time domain for arbitrary transmitting waves. To optimize the computational time and memory requirements, we use the EM “footprint” concept to reduce the model size and obtain the sparse sensitivity matrix. To improve the 3D inversion, we use the OpenMP library and parallel computing. We test the proposed 3D parallel inversion code using two synthetic datasets and a field dataset. The time-domain airborne EM inversion results suggest that the proposed algorithm is effective, efficient, and practical. 相似文献
8.
对三维电阻率反演问题进行了深入研究,提供了一种利用地表观测数据实现三维反演的实用算法.该方法应用有限差分求正演解,并通过对粗糙度矩阵元素进行适当改进,使之适用于各种情况下粗糙度矩阵的求取,进而建立在模型的总粗糙度极小条件下的反演方程.对反演方程采用收敛速度快且稳定的最小二乘正交分解（LSQR）法进行迭代求解,在迭代求解过程中只需利用偏导数矩阵和其转置矩阵乘以一个向量的结果,回避了直接求偏导数矩阵的繁琐计算,节省了内存,加快了反演的计算速度.不同的计算实例表明上述方法是求解大规模三维电阻率反演问题的有效方法. 相似文献
9.
Two‐dimensional joint inversions of cross‐hole resistivity data and resolution analysis of combined arrays 
下载免费PDF全文
下载免费PDF全文 In this study, a new two‐dimensional inversion algorithm was developed for the inversion of cross‐hole direct current resistivity measurements. In the last decades, various array optimisation methods were suggested for resistivity tomography. However, researchers have still collected data by using classical electrode arrays in most cross‐hole applications. Therefore, we investigated the accuracy of both the individual and the joint inversion of the classical cross‐hole arrays by using both synthetic and field data with the developed algorithm. We showed that the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole electrode arrays gives inverse solutions that are closer to the real model than the individual inversions of the electrode array datasets for the synthetic data inversion. The model resolution matrix of the suggested arrays was used to analyse the inversion results. This model resolution analysis also showed the advantage of the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole arrays. We also used sensitivity sections from each of the arrays and their superpositions to explain why joint inversion gives better resolution than the any individual inversion result. 相似文献
10.
A fast inversion technique for the interpretation of data from resistivity tomography surveys has been developed for operation on a microcomputer. This technique is based on the smoothness-constrained least-squares method and it produces a two-dimensional subsurface model from the apparent resistivity pseudosection. In the first iteration, a homogeneous earth model is used as the starting model for which the apparent resistivity partial derivative values can be calculated analytically. For subsequent iterations, a quasi-Newton method is used to estimate the partial derivatives which reduces the computer time and memory space required by about eight and twelve times, respectively, compared to the conventional least-squares method. Tests with a variety of computer models and data from field surveys show that this technique is insensitive to random noise and converges rapidly. This technique takes about one minute to invert a single data set on an 80486DX microcomputer. 相似文献
11.
对于时间域航空电磁法二维和三维反演来说,最大的困难在于有效的算法和大的计算量需求.本文利用非线性共轭梯度法实现了时间域航空电磁法2.5维反演方法,着重解决了迭代反演过程中灵敏度矩阵计算、最佳迭代步长计算、初始模型选取等问题.在正演计算中,我们采用有限元法求解拉式傅氏域中的电磁场偏微分方程,再通过逆拉氏和逆傅氏变换高精度数值算法得到时间域电磁响应.在灵敏度矩阵计算中,采用了基于拉式傅氏双变换的伴随方程法,时间消耗只需计算两次正演,从而节约了大量计算时间.对于最佳步长计算,二次插值向后追踪法能够保证反演迭代的稳定性.设计两个理论模型,检验反演算法的有效性,并讨论了选择不同初始模型对反演结果的影响.模型算例表明:非线性共轭梯度方法应用于时间域航空电磁2.5维反演中稳定可靠,反演结果能够有效地反映地下真实电性结构.当选择的初始模型电阻率值与真实背景电阻率值接近时,能得到较好的反演结果,当初始模型电阻率远大于或远小于真实背景电阻率值时反演效果就会变差. 相似文献
12.
在频率域弹性波有限元正演方程的基础上,依据匹配函数（也就是观测数据和正演数据残差的二次范数）最小的准则,用矩阵压缩存储与LU分解技术来存储和求解频率域正演方程中的大型稀疏复系数矩阵、用可调阻尼因子的Levenberg Marquard方法求解反演方程组,直接求取地下介质的弹性波速度,导出了频率域弹性波有限元最小二乘反演算法. 为了利用地下地质体的分布规律,减少反演所求的未知数个数,本文又提出了规则地质块体建模方法引入到反演中来. 经数值模型验证,在噪声干扰很大（噪声达到50髎）或初始模型与真实模型相差很大的情况下,反演也能取得很满意的效果,证明本方法具有很好的抗噪性与“强壮性”. 相似文献
13.
基于光滑约束的最小二乘法是三维电阻率反演的主要方法,但该方法在某些情况下存在着多解性较强的问题,且普遍耗时较长,严重制约了三维反演方法的推广与发展.为改善上述问题,将表征模型参数变化范围的不等式约束作为先验信息引入最小二乘线性反演方法中,有效地改善了反演结果的精度,降低了反演的多解性问题.为了解决耗时较长的问题,基于预条件共轭梯度(PCG)算法和Cholesky分解法的特点提出了一套优化三维电阻率反演计算效率的计算方案.在该方案中,Cholesky分解法被用来求解敏感度矩阵计算中的多个点源场的正演问题,Cholesky分解法只需对总体系数矩阵进行一次分解,然后对不同的右端向量进行回代即可.将预条件共轭梯度法引入到三维电阻率反演方程的求解中,将雅可比迭代中的对角阵作为预处理矩阵,其具有求逆方便、无需内存空间的特点,有效地加快了收敛速度.对合成数据以及实测数据的反演算例表明,借助不等式约束和反演效率优化方案,最小二乘反演方法可得到较为精确的反演结果,有效地提高了反演计算效率,具有良好的推广前景. 相似文献
14.
2D data modelling by electrical resistivity tomography for complex subsurface geology 总被引：3，自引：1，他引：3
A new tool for two‐dimensional apparent‐resistivity data modelling and inversion is presented. The study is developed according to the idea that the best way to deal with ill‐posedness of geoelectrical inverse problems lies in constructing algorithms which allow a flexible control of the physical and mathematical elements involved in the resolution. The forward problem is solved through a finite‐difference algorithm, whose main features are a versatile user‐defined discretization of the domain and a new approach to the solution of the inverse Fourier transform. The inversion procedure is based on an iterative smoothness‐constrained least‐squares algorithm. As mentioned, the code is constructed to ensure flexibility in resolution. This is first achieved by starting the inversion from an arbitrarily defined model. In our approach, a Jacobian matrix is calculated at each iteration, using a generalization of Cohn's network sensitivity theorem. Another versatile feature is the issue of introducing a priori information about the solution. Regions of the domain can be constrained to vary between two limits (the lower and upper bounds) by using inequality constraints. A second possibility is to include the starting model in the objective function used to determine an improved estimate of the unknown parameters and to constrain the solution to the above model. Furthermore, the possibility either of defining a discretization of the domain that exactly fits the underground structures or of refining the mesh of the grid certainly leads to more accurate solutions. Control on the mathematical elements in the inversion algorithm is also allowed. The smoothness matrix can be modified in order to penalize roughness in any one direction. An empirical way of assigning the regularization parameter (damping) is defined, but the user can also decide to assign it manually at each iteration. An appropriate tool was constructed with the purpose of handling the inversion results, for example to correct reconstructed models and to check the effects of such changes on the calculated apparent resistivity. Tests on synthetic and real data, in particular in handling indeterminate cases, show that the flexible approach is a good way to build a detailed picture of the prospected area. 相似文献
15.
Mattia Aleardi 《Geophysical Prospecting》2020,68(9):2738-2761
Markov chain Monte Carlo algorithms are commonly employed for accurate uncertainty appraisals in non-linear inverse problems. The downside of these algorithms is the considerable number of samples needed to achieve reliable posterior estimations, especially in high-dimensional model spaces. To overcome this issue, the Hamiltonian Monte Carlo algorithm has recently been introduced to solve geophysical inversions. Different from classical Markov chain Monte Carlo algorithms, this approach exploits the derivative information of the target posterior probability density to guide the sampling of the model space. However, its main downside is the computational cost for the derivative computation (i.e. the computation of the Jacobian matrix around each sampled model). Possible strategies to mitigate this issue are the reduction of the dimensionality of the model space and/or the use of efficient methods to compute the gradient of the target density. Here we focus the attention to the estimation of elastic properties (P-, S-wave velocities and density) from pre-stack data through a non-linear amplitude versus angle inversion in which the Hamiltonian Monte Carlo algorithm is used to sample the posterior probability. To decrease the computational cost of the inversion procedure, we employ the discrete cosine transform to reparametrize the model space, and we train a convolutional neural network to predict the Jacobian matrix around each sampled model. The training data set for the network is also parametrized in the discrete cosine transform space, thus allowing for a reduction of the number of parameters to be optimized during the learning phase. Once trained the network can be used to compute the Jacobian matrix associated with each sampled model in real time. The outcomes of the proposed approach are compared and validated with the predictions of Hamiltonian Monte Carlo inversions in which a quite computationally expensive, but accurate finite-difference scheme is used to compute the Jacobian matrix and with those obtained by replacing the Jacobian with a matrix operator derived from a linear approximation of the Zoeppritz equations. Synthetic and field inversion experiments demonstrate that the proposed approach dramatically reduces the cost of the Hamiltonian Monte Carlo inversion while preserving an accurate and efficient sampling of the posterior probability. 相似文献
16.
地表起伏地形在野外矿产资源勘察中不可避免,其对直流电阻率法勘探影响巨大.近年来,电阻率三维正演取得诸多进展,特别是应用非结构网格我们能够进行任意复杂地形和几何模型的电阻率三维数值模拟,但面向实际应用的起伏地形下电阻率三维反演依然困难.本文基于非结构化四面体网格,并考虑到应用GPS/GNSS时,区域地球物理调查中可非规则布设测网的实际特点,实现了任意地形(平坦或起伏)条件下、任意布设的偶极-偶极视电阻率数据的不完全Gauss-Newton三维反演.合成数据的反演结果表明了方法的有效性,可应用于复杂野外环境下的三维电法勘探. 相似文献
17.
时间域激发极化法(Time-domain induced polarization method,简称为TDIP)已有的反演算法采用的是分步反演的思路,即先由视电阻率资料反演电阻率,固定电阻率再由视极化率资料反演极化率,这样就存在极化率结果严重依赖于电阻率反演结果的问题.为了有效解决这一问题,本文实现了TDIP二维数据空间分步反演算法,提出了基于交叉梯度约束的TDIP二维同步反演策略,实现了交叉梯度约束的电阻率和极化率二维同步反演算法.分别用电阻率和极化率结构一致和不一致的二维模型合成数据进行了分步和同步反演试算,对不同模型试算结果进行了对比分析.结果表明:对于电阻率和极化率结构一致和不一致模型,同步反演结果比分步反演结果能更好地确定异常体的空间分布范围,反演得到的电阻率和极化率值更接近真值.理论模型算例表明本文提出的同步反演算法有效解决了分步反演的问题,优于分步反演算法,具有更好的实用性. 相似文献
18.
Mohammad Israil 《Acta Geophysica》2006,54(2):126-141
Two techniques have been presented for the delineation of boundaries from smooth models obtained by smooth inversion techniques
of geoelectrical sounding data, such as straightforward inversion scheme, Occam’s and Zohdy’s methods. The smooth model consists
of a large number of equally spaced layers, wherein the real geological boundaries are missing. The techniques proposed here
suppress the geologically irrelevant boundaries and support the real structural boundaries present in the geoelectrical data.
In the first technique, solution of linear inverse problem is improved iteratively through weighted minimum norm inverse,
the weight being taken from the current solution. The technique is referred as Iterative Straightforward Inversion Scheme.
The second method is analytical, based on the application of smoothing filter, referred in the literature as edge-preserving
smoothing. A few examples of theoretical magnetotelluric, dc resistivity and field sounding data have been presented to demonstrate
the capabilities of the techniques. The methodologies also reduce the conspicuous oscillations in the smooth solutions caused
by the conversion of sharp boundaries to the smooth ones. 相似文献
19.
20.
电阻率层析成像是一种广泛应用在水文、考古和地质等浅地表勘探领域的地球物理方法。为了增强电阻率层析成像的分辨率、应对复杂的地质问题,本文提出基于雅可比矩阵的不同电极阵列直流电阻率数据的加权联合反演算法,并以温纳和偶极-偶极电极阵列数据为例,在理论模型和古墓探测的野外实例中测试该算法的有效性。结果表明,加权联合反演结果的横向和纵向分辨率都优于单一电极阵列的反演结果,并在实例中缓解“U形”电极阵列的固有缺陷、减少反演模糊性、更好地约束墓室宽度的反演结果。 相似文献