共查询到20条相似文献，搜索用时 31 毫秒
1.
In this case study we consider the seismic processing of a challenging land data set from the Arabian Peninsula. It suffers from rough top‐surface topography, a strongly varying weathering layer, and complex near‐surface geology. We aim at establishing a new seismic imaging workflow, well‐suited to these specific problems of land data processing. This workflow is based on the common‐reflection‐surface stack for topography, a generalized high‐density velocity analysis and stacking process. It is applied in a non‐interactive manner and provides an entire set of physically interpretable stacking parameters that include and complement the conventional stacking velocity. The implementation introduced combines two different approaches to topography handling to minimize the computational effort: after initial values of the stacking parameters are determined for a smoothly curved floating datum using conventional elevation statics, the final stack and also the related residual static correction are applied to the original prestack data, considering the true source and receiver elevations without the assumption of nearly vertical rays. Finally, we extrapolate all results to a chosen planar reference level using the stacking parameters. This redatuming procedure removes the influence of the rough measurement surface and provides standardized input for interpretation, tomographic velocity model determination, and post‐stack depth migration. The methodology of the residual static correction employed and the details of its application to this data example are discussed in a separate paper in this issue. In view of the complex near‐surface conditions, the imaging workflow that is conducted, i.e. stack – residual static correction – redatuming – tomographic inversion – prestack and post‐stack depth migration, leads to a significant improvement in resolution, signal‐to‐noise ratio and reflector continuity. 相似文献
2.
Yonghai Zhang 《Geophysical Prospecting》2010,58(6):915-924
Seismic data acquired along rugged topographic surfaces present well‐known problems in seismic imaging. In conventional seismic data processing, datum statics are approximated by the surface consistence assumption, which states that all seismic rays travel vertically in the top layer. Hence, the datum static for each single trace is constant. In case this assumption does not apply, non‐constant statics are required. The common reflection surface (CRS) stack for rugged surface topography provides the capability to deal with this non‐vertical static issue. It handles the surface elevation as a coordinate component and treats the elevation variation in the sense of directional datuming. In this paper I apply the CRS stack method to a synthetic data set that simulates the acquisition along an irregular surface topography. After the CRS stack, by means of the wavefield attributes, a simple algorithm for redatuming the CRS stack section to an arbitrarily chosen planar surface is performed. The redatumed section simulates a stack section whose acquisition surface is the chosen planar surface. 相似文献
3.
在地表地形复杂的情况下，静校正不易做好，这是制约山地资料处理质量的一个很重要的因素.复杂地表共反射面元（CRS）叠加不需对叠前数据做静校正，而且在得到叠加剖面后可以利用叠加得到的波场参数剖面实现基准面重建.地震数据的试算表明，复杂地表CRS叠加得出的剖面与常规处理剖面相比有着较高的信噪比和同相轴连续性.与水平地表CRS叠加不同的是，在复杂地表CRS叠加的时距公式中，波场三参数耦合，难以通过简化CRS道集的方法将它们全部分离并逐个优化.引入模拟退火算法后，有效地解决了这一组合优化的难题. 相似文献
4.
由于地表起伏和近地表结构变化产生的静校正问题严重影响了煤田地震资料的成像质量.为此,首先利用低速带分片拟合的广义线性反演技术进行折射波静校正,解决长波长静校正问题和部分短波长静校正问题,然后,利用叠加能量最大静校正技术进一步解决剩余静校正问题,最后,利用非地表一致性剩余时差校正技术,解决速度和射线等误差引起的非地表一致性剩余时差问题.实验结果表明,在以串连的方式应用了三种校正方法之后,在共炮点道集上,折射渡同相轴的线性形态得到了恢复;在动校正后的共中心点道集上,煤层反射的双曲线同相轴被拉平;在叠加剖面上,煤层反射的信噪比得到了改善. 相似文献
5.
P-SV转换波处理与传统的P-P波处理有很大的不同,如S波静校正、CCP叠加、P-SV速度分析和偏移等,其中最大的难题就是S波静校正问题.S波速度基本不受潜水面的影响,与纵波静校正没有直接相关性,有时横波静校正量能达到纵波静校正量的十倍,用纵波静校正量乘以比例系数来解决横波静校正问题将导致较大误差.同一接收点X和Z分量存在一定的初至时差,该时差代表了P波和S波在低降速带的走时差,可以利用该时差和近地表纵横波速度比信息去除低降速带对横波的影响,得到准确的静校正量.本文利用多分量初至时差推导了较为精确的横波静校正公式,再结合共检波点叠加求取剩余静校正量的方法,形成了完整的转换波静校正配套方法.利用该方法对苏里格气田二维及三维多波地震资料进行了实际处理,数据处理结果证明了该方法的有效性,该方法尤其适用于其他方法难以奏效的风化层较厚地区的横波静校正量求解,该方法也同时考虑了长波长横波静校正问题. 相似文献
6.
7.
浅层地震反射法是一种常用的勘探方法.在浅层地震资料处理中,静校正的精度直接影响速度反演的结果和叠加剖面的质量,在地形平缓时,固定基准面静校正可以满足勘探精度的要求,但在复杂地形条件下,其存在较大误差,即使采用浮动基准面,仍会由于地表一致性假设而残余静校正量,不能消除地形起伏引起的影响,为了提高浅层地震反射静校正的精度必须在常规静校正后进行一次剩余静校正,本文给出起伏地形条件下,滑动基准面(过共中心点的水平面即为该共中心点的滑动基准面)的剩余静校正量,该校正量与炮检距、反射层埋深、地层波速以及炮点和接收点高程有关,适用于单一介质和层状介质情况,本文通过对典型地形起伏的3个水平均匀层状介质理论地质模型的速度谱计算和分析,阐明在复杂地形条件下,应用本文提出的剩余静校正方法可以消除地形起伏的影响,提高静校正精度,在此基础上做动校正可以得到高质量的水平叠加剖面. 相似文献
8.
Static shifts from near‐surface inhomogeneities very often represent the key problem in the processing of seismic data from arid regions. In this case study, the deep bottom fill of a wadi strongly degrades the image quality of a 2D seismic data set. The resulting static and dynamic problems are solved by both conventional and common‐reflection‐surface (CRS) processing. A straightforward approach derives conventional refraction statics from picked first breaks and then goes through several iterations of manual velocity picking and residual statics calculation. The surface‐induced static and dynamic inhomogeneities, however, are not completely solved by these conventional methods. In CRS processing, the local adaptation of the CRS stacking parameters results in very detailed dynamic corrections. They resolve the local inhomogeneities that were not detected by manual picking of stacking velocities and largely compensate for the surface‐induced deterioration in the stack. The subsequent CRS residual statics calculations benefit greatly from the large CRS stacking fold which increases the numbers of estimates for single static shifts. This improves the surface‐consistent averaging of static shifts and the convergence of the static solution which removes the remaining static shifts in the 2D seismic data. The large CRS stacking fold also increases the signal‐to‐noise ratio in the final CRS stack. 相似文献
9.
Static correction is a common step in a seismic data proccessing flowchart for land data. Here we propose a new algorithm for automatic short‐period static correction. The algorithm is based on the assumption that seismic events after short‐period static correction should be locally plane nearly everywhere. No other assumptions are made. Therefore the proposed method does not require a preliminary velocity analysis. The algorithm consists in two main parts: evaluation of second spatial differences of trajectories and subsequent regularized integration of these differences. The proposed method proves its robustness and shows results comparable with conventional residual static correction based on improving common‐midpoint stacking. In contrast to the conventional residual static, the proposed algorithm can estimate short‐period statics in complex cases where common‐midpoint stacking fails because of non‐hyperbolic events. 相似文献
10.
Common reflection surface stack using dip decomposition for rugged surface topography 总被引：1，自引：0，他引：1
We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections. 相似文献
11.
A single‐layer model of the near surface throughout the Kingdom of Saudi Arabia is available. While this simple model suffices for most areas and large subsurface structures, it fails in situations where the surface topography is complex, the base of weathering is below the datum, or where the time structural closure is less than the uncertainty in the static correction. In such cases, multiple‐layered models that incorporate velocities derived from analysis of first arrivals picked from seismic shot records have proved to be successful in defining the lateral heterogeneity of the near surface. The additional velocity information obtained from this first‐arrival analysis (direct as well as refracted arrivals) vastly improves the velocity–depth model of the near surface, regardless of the topography. Static corrections computed from these detailed near‐surface velocity models have significantly enhanced subsurface image focusing, thereby reducing the uncertainty in the closure of target structures. Other non‐seismic methods have been used either to confirm qualitatively or to enhance the layer models previously mentioned. Gravity data may be particularly useful in sandy areas to confirm general structure, while geostatistical modelling of vibrator base‐plate attributes has yielded information that enhances the velocity field. In the global context, exploration targets of the oil and gas industry are seeking smaller and lower relief‐time structures. Thus, near‐surface models will need to enhance and integrate these methods, particularly in areas where the assumption of flat‐lying near‐surface layers cannot be met. 相似文献
12.
低信噪比转换波地震资料静校正(英文) 总被引：1，自引：0，他引：1
Converted waves have slow velocity and low signal-to-noise ratio. It is also difficult to pick first-breaks and bin the common-conversion-points （CCP）. Some statics methods, which work well for P-wave data, can＇t be effectively used for solving convertedwave statics problems. This has become the main obstacle to breakthroughs in convertedwave data processing. To improve converted-wave static corrections, first, a statics method based on the common-receiver-point （CRP） stack is used for the initial receiver static correction to enhance the coherency of the CRP stack. Second, a stack-power-maximization static correction which improves the continuity of the CCP stack is used for detailed receiver statics. Finally, a non-surface-consistent residual moveout correction of the CCP gathers is used to enhance the stack power of reflection signals from different depths. Converted-wave statics are solved by the joint use of the three correction methods. 相似文献
13.
如何正确地消除复杂地表对地震波场的影响，提高地下构造成像的质量一直是中国西部复杂地区地震勘探中存在的难题.本文在三维复杂表层速度模型层析反演\[1\]的基础上，研究了关于复杂地表的静校正问题，提出用三维波动方程在炮集上对地震波场进行正、反向延拓，消除复杂地表对波场的影响，实现三维复杂表层模型校正.理论和实际应用证明，该方法已超越常规静校正的含义，属时变校正方法.用本方法处理复杂地表问题，不但能消除表层对不同深度反射波产生的不同时差影响，提高叠加剖面质量，而且能使校正后的地震波场保持波动特征不发生畸变，可为建立正确的深层速度模型和波动方程叠前深度偏移奠定良好的基础. 相似文献
14.
共反射面元（CRS）叠加考虑了反射层的局部特征和第一菲涅耳带内的全部反射，更充分挖掘了多次覆盖数据的潜力.但在地下介质复杂并存在倾斜层时存在反射点分散的情况，从而影响了CRS叠加效果.本文从射线理论出发，在考虑反射层局部特征的情况下，推导了水平地表和起伏地表情况下计算真实反射点分散程度的公式，最终将反射点分散程度定量表达出来.通过对反射点分散程度的控制，从CRS道集中抽取出共反射点（CRP）道集，在CRP道集中而不是在CRS道集中实现叠加，其效果应比传统的CRS叠加效果要好.利用水平地表和起伏地表的模型验证了本文所推导的公式的正确性和有效性.该公式在实际资料处理中的运用尚待进一步研究. 相似文献
15.
由于地面微地震监测台站布设在地表,会受到地表起伏、低降速带厚度和速度变化的影响,降低了微地震事件的识别准确度和定位精度,限制了地面微地震监测技术在复杂地表地区的应用.因此,将三维地震勘探技术的思路引入到地面微地震监测中,提出了三维地震与地面微地震联合校正方法,将油气勘探和开发技术更加紧密地结合在一起.根据三维地震数据和低降速带测量数据,通过约束层析反演方法建立精确的近地表速度模型,将地面微地震台站从起伏地表校正到高速层中的平滑基准面上,有效消除复杂近地表的影响.其次,根据射孔数据和声波测井速度信息,通过非线性反演方法建立最优速度模型,由于已经消除复杂近地表的影响,在进行速度模型优化时不需要考虑近地表的影响,因而建立的速度模型更加准确.最后,在精确速度模型的基础上,通过互相关方法求取剩余静校正量,进一步消除了复杂近地表和速度模型近似误差的影响.三维地震与地面微地震联合校正方法采用逐步校正的思路,能够有效消除复杂近地表的影响,提高微地震数据的品质和速度模型的精确度,保证了微地震事件的定位精度,具有良好的应用前景. 相似文献
16.
为探索大容量气枪震源在深部地震探测中的应用，2015年10月在安徽铜陵段开展气枪流动激发试验。该试验采用沿长江航道激发、岸边固定排列接收的工作方式，因受长江航道及江岸地形的影响，加上原始记录中干扰波发育、静校正问题突出等，基于常规的共中心点叠加的数据处理方法已不再适用。为此，开展了针对性的数据处理方法研究。本文采用初至波层析静校正、叠前多域多道集去噪以及非纵弯线共反射面元叠加等一系列处理技术，结果显示所获测线经过区域的深部构造叠加剖面较清晰。 相似文献
17.
18.
We apply interferometric theory to solve a three‐dimensional seismic residual statics problem to improve reflection imaging. The approach calculates the static solutions without picking the first arrivals from the shot or receiver gathers. The static correction accuracy can be significantly improved by utilising stacked virtual refraction gathers in the calculations. Shots and receivers may be placed at any position in a three‐dimensional seismic land survey. Therefore, it is difficult to determine stationary shots and receivers to form the virtual refraction traces that have identical arrival times, as in a two‐dimensional scenario. To overcome this problem, we use a three‐dimensional super‐virtual interferometry method for residual static calculations. The virtual refraction for a stationary shot/receiver pair is obtained via an integral along the receiver/shot lines, which does not require knowledge of the stationary locations. We pick the maximum energy times on the interferometric stacks and solve a set of linear equations to derive reliable residual static solutions. We further apply the approach to both synthetic and real data. 相似文献
19.
静校正问题是地震勘探的关键问题，直接影响地震勘探精度和准确性.实际地震采集过程中，当在相同接收点位置上不同时间内插拔布设了不同的检波器时，对于目前基于地表一致性理论假设的基准面静校正和剩余静校正，以及非地表一致性剩余静校正都不具备适用条件.为解决这一问题，本文提出了基于共姿态道集的静校正方法，将相同接收点位置上不同时间布设的检波点所接收的地震数据抽成不同的共姿态道集，在共姿态道集内实施地表一致性静校正；当某接收点位置上具有若干个共姿态道集时，该接收点位置上可能会存在多个检波点静校量；炮点静校问题仍然采用地表一致性静校正方法解决.该方法解决了同一接收点位置上不同共姿态道集之间的非地表一致性静校正问题，同时也解决了全区的检波点和炮点的地表一致性静校正问题，在实际数据应用效果明显. 相似文献
20.
Kai Yang Bao‐shu Chen Xiao‐jiang Wang Xiao‐chun Yang Jun‐rong Liu 《Geophysical Prospecting》2012,60(2):255-269
In the application of a conventional common‐reflection‐surface (CRS) stack, it is well‐known that only one optimum stacking operator is determined for each zero‐offset sample to be simulated. As a result, the conflicting dip situations are not taken into account and only the most prominent event contributes to any a particular stack sample. In this paper, we name this phenomenon caused by conflicting dip problems as ‘dip discrimination phenomenon’. This phenomenon is not welcome because it not only leads to the loss of weak reflections and tips of diffractions in the final zero‐offset‐CRS stacked section but also to a deteriorated quality in subsequent migration. The common‐reflection‐surface stack with the output imaging scheme (CRS‐OIS) is a novel technique to implement a CRS stack based on a unified Kirchhoff imaging approach. As far as dealing with conflicting dip problems is concerned, the CRS‐OIS is a better option than a conventional CRS stack. However, we think the CRS‐OIS can do more in this aspect. In this paper, we propose a workflow to handle the dip discrimination phenomenon based on a cascaded implementation of prestack time migration, CRS‐OIS and prestack time demigration. Firstly, a common offset prestack time migration is implemented. Then, a CRS‐OIS is applied to the time‐migrated common offset gather. Afterwards, a prestack time demigration is performed to reconstruct each unmigrated common offset gather with its reflections being greatly enhanced and diffractions being well preserved. Compared with existing techniques dealing with conflicting dip problems, the technique presented in this paper preserves most of the diffractions and accounts for reflections from all possible dips properly. More importantly, both the post‐stacked data set and prestacked data set can be of much better quality after the implementation of the presented scheme. It serves as a promising alternative to other techniques except that it cannot provide the typical CRS wavefield attributes. The numerical tests on a synthetic Marmousi data set and a real 2D marine data set demonstrated its effectiveness and robustness. 相似文献