首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
By shallow seismic prospecting, the Cenozoic Group in the sea area near the Yangtze Rver Mouth can be divided into five seismic sequences. They correspond to the Quaternary,Pliocene, Upper Miocene, Lower Miocene and Eocene respectively. The Quaternary System covers all the detecting area. The Tertiary System overlaps and thins out from NE to SW. The sedimentary basement mainly consists of volcanic rock (J3) and acidic rock (r35). Paleogene or Late Cretaceous basins are not found there. The faults that have been detected are all normal faults. They can be divided into three groups (NE, NW, near EW) by their trend. The NE and NW-trending faults are predominant, and agree with aeromagnetic anomaly. Their length and displacement are larger than that of the EW-trending faults. The activity of the NEtrending faults is different in different segments. The SW segment is a Quaternary fault, the middle segment is a Neogene fault, The NE is Paleogene. But the segment of the NW-trending fault is not obvious. The average vertical displacement rate is about 0.015mm/a.  相似文献   

2.
Effect of fault jogs on frictional behavior: An experimental study   总被引：1，自引：0，他引：1  
Studying the effect of geometrically irregular bodies on the mechanical behavior of fault activity is of significance in understanding the seismic activity along a fault zone. By using rock mechanics ex- periment with medium-scale samples, we have studied the effect of fault jogs, the most common irregularity along fault zones, on frictional behavior. The research indicates that extensional fault jog can be easily fractured because of its low strength and the fractured jog has no obvious resistance to fault sliding, and the micro-fractures occurring in the jog are indicative of stick-slip along the faults. The fault zone containing extensional jogs is characterized by velocity weakening and can be described by rate and state friction law. Compressional fault jog makes fault sliding more difficult because of its high fracturing strength, but the micro-fractures occurring in the tensile areas around fault ends at higher stress level can provide necessary condition for occurrence of stick-slip along the faults before the jog is fractured and thus act as precursors of fault instability. Compression jog can be taken as a stable indicator of fault segmentation until the jog is completely fractured and two faults are linked.  相似文献   

3.
Focal Fault of the 1999 Datong Ms5.6 Earthquake in Shanxi Province   总被引：1，自引：0，他引：1  
Several earthquakes with Ms≥5.0 occurred in the Datong seismic region in 1989,1991 and 1999,The precise focus location of the earthquake sequence was made by the records of the remote sensing seismic station network in Datong.Using that data together with macro-intensity distribution and focal mechanism solutions,we analyze the difference among three subsequences.The results show that the focal fault of the 1999 Ms 5.6 earthquake was a NWW-trending left-lateral strike-slip fault.It is 16km long and 12km wide.It developed at the depth of 5km and is nearly vertical in dip.The two previous earthquake subsequences,however,were generated by activity along NNE-trending right-lateral strike-slip fault.It can be found that the rupture directioin of the 1999 earthquake has changed.It is generally found that a rupture zone has more than two directions and has different strength along these two directions.The complicate degree of focal circumstance is related to the type of earthquake sequences.There is the NE-trending Dawangcun fault and the NW-trending Tuanbu fault in the seismic region,but no proof indicates a connection between focal faults and these two tectonic faults.The feature that focal faults of three subsequences are strike-slip is different from that of the two tectonic faults.It is suggested that the 1999 earthquake subsequence was possibly generated by a new rupture.  相似文献   

4.
Fault zone trapped waves( F ZTWs) m ainly travel along the fractured fault zone( F Z)which is of low velocity and high attenuation. FZTWs often carry significant information about a fault  s internal structure,so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults,while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude,a fault zone can generate a larger amplitude of waves. The velocity contrast between two walls of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency,a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs,it tends to be single direction for vertical faults but fork to multiple directions for inclined faults,which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion,and will enhance the knowledge on near-fault strong ground motions.  相似文献   

5.
The northern boundary fault of Huailai-Zhuolu basin,Hebei Province,has a total length of 58 km and a general strike of NE.The geometry and feature of activity of the 5 segments of the fault greatly differ from each other.17 paleoseismic events have been recognized within 11 trenches excavated along the different segments of the fault.It is found that each segment is characterized by its distinct recurrence of paleoearthquakes.The recurrence intervals of strong earthquakes for each segment are 3500-7000 a for the shortest and 17,000-20,500 a for the longest.However,the recurrence interval of strong earthquakes for whole fault ranges between 750-8500 a.The boundary of the segments can be recognized as the junction,gap,bending,jog and salient of the fault.The length of the segment ranges between 7.5-14 km.  相似文献   

6.
The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180-240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the base-ment. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area.  相似文献   

7.
The Huoshan fault is an important fault controlling the boundary of the Linfen basin at the middle transtensional segment of the Shanxi graben system.In this paper a discussion is made emphatically on the tectonic segmentation of the Huoshan fault,its internal geometric structures and characteristics of its activities since the late Quaternary on the basis of 1:10,000 scale geological mapping.Our investigations indicate that the Huoshan fault can be divided into 3 segments with different behaviors and structures.Among these 3,the shear segment with dextral movement is composed of a number of second-order shear faults in right-lateral stepover or left-lateral stepover arrangement.It has a maximum dextral displacement up to 9.83 km since the Pliocene,a dextral slip rate of 2.0 mm/a; a maximum vertical differential displacement of 3.44 km,and a differential oscillatory movement rate of 0.69 mm/a.The lower limit of dextral Holocene slip rate is about 5 mm/a.  相似文献   

8.
Based on fault geometric features,composite pattern,faulting land-forms and seismic data,this paper discussed the activity behavior along the northern segment of the Anninghe fault(from Xichang to Shimian)since the Late Pleistocene.The fault can be divided into three active segments by discrepancies of their activity:the segment from Xichang to Mianning,the segment from Mianning to Zimakua,and the segment from Zimakua to Tianwan.The southern segment has the background of occurrence of great earthquakes,but the middle and the northern segments can generate strong and moderate events respectively.According to the features of quartz from fault gouges by scanning electron microscopy(SEM),this paper discussed the movement features along the fault and indicated the stick-slipping feature on the segment from Xichang to Zimakua,the creeping feature on the segment from Jiziping to Tianwan and the transitional feature on the segment in between.  相似文献   

9.
The results of seismic deep reflection,high resolution refraction and shallow artificial seismic exploration indicate that the fault on the northern bank of the Weihe river is composed of two faults,one is the Yaodian-Zhangjiawan fault and the other is the Chuanzhang-Zuitou fault.The 22 km long Yaodian-Zhangjiawan fault of EW-striking starts from Chenjiagou via Yaodian town,Qianpai village,Bili village,Wujia town and Zhangjiawan to Jiajiatan.The 15 km long Chuanzhang-Zuitou fault striking near EW starts from Chuanzhang via Mabei to Zuitou.The Weihe fault offset the basement and upper crust,the reflecting layers of TQ,TN,TE and Tg are ruptured at depth of about 15 km.In the deep part,the Weihe fault and the secondary fault form a Y-shaped structure or a synthetic low angle intersection.The Weihe fault is a listric normal fault.The fault has obvious structural characteristics of a reversed-drag normal fault and a normal drag normal fault with the depth of 1 000 m,and also has the characteris-tics of syngenetic sediment.The Weihe fault is one of the faults which control the basin sediment,and it is the boundary fault of Xi’an depression and Xianyang salient.The depth of the fault decreases from the west to east gradually,the deep part intersects with the Lintong-Chang’an fault at the intersection part of Weihe River,Jinghe River and Bahe River and the shallow part connects with the Weinan-Jingyang fault.The seismic exploration re-sults indicate that no fault exists on southern bank of the Weihe River.  相似文献   

10.
The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles.  相似文献   

11.
A remarkable earthquake struck Yutian, China on June 26~(th), 2020. Here, we use Sentinel-1 images to investigate the deformation induced by this event. We invert the In SAR observations using a two-step approach: a nonlinear inversion to constrain fault geometries with uniform slip based on the rectangular plane dislocation in an elastic half-space, followed by a linear inversion to retrieve the slip distribution on the fault plane. The results show that the maximum LOS displacement is 22.6 cm, and the fault accessed to the ruptured characteristics of normal faults with the minor left-lateral strike-slip component. The fault model indicates a 210° strike. The main rupture zone concentrates in the depth of 5–15 km, and the fault slip peaks at 0.89 m at the depth of 9 km. Then, we calculate the variation of the static Coulomb stress based on the optimal fault model, the results suggest that the Coulomb stress of the Altyn Tagh fault and other neighboring faults has increased and more attention should be paid to possible seismic risks.  相似文献   

12.
By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.  相似文献   

13.
To monitor the activity of the Huangzhuang-Gaoliying and Babaoshan faults in their middle sections,a network for leveling,short-side ranging,and gravity and geomagnetic observations at the same time and at the same station was set up.By this network,the time and space distribution and the relation between different observations have been studied.It is considered that the Huangzhuang-Gaoliying fault is in a locked state for rapid strain energy accumulation,while the Babaoshan fault is in a state of creep or unrestrained motion.To do comprehensive monitoring of fault activity by making deformation,gravity,and geomagnetic observations at the same time and at the same station,it would be possible to acquire the microscopic state of fault activity and the data of earthquake preparation; such an approach is considered worth popularizing.  相似文献   

14.
Cosmogenic nuclide burial age of the Sanying Formation and its implications   总被引：1，自引：0，他引：1  
The Pliocene fluvial/lacustrine sediments of the Sanying Formation lie along the Red River fault and its northwest extension;their majority outcrops appear around Eryuan.The Sanying Formation is characterized by multiple intercalated coal layers and its unconformities contact with the underlying Triassic limestone and the overlying Quaternary coarse sediments.Cosmogenic nuclide burial dating confirms the Pliocene age of the Sanying Formation.The burial ages of the overlying Quaternary sediments provide the lower age limit of the Sanying Formation:2 Ma.Detrital zircon U-Pb age distribution suggests provenance of the Sanying Formation traced to the Songpan-Ganzi flysch belt.From the spatial distribution as well as sedimentary and fault ages,we found a strong connection of the Sanying Formation with the Red River and the Jianchuan faults.We therefore propose that activation of the Red River and the Jianchuan faults during the Late Miocene resulted in subsidence of basins in the extensional areas around Eryuan and in the middle to south segments of the Red River fault.The basins were filled with water carried by the Jinsha River and overflow-lakes formed within the basins where the Sanying Formation was deposited.Most of the lakes were dried and sedimentation of the Sanying Formation ceased due to the uplift of the Yunling Mountains,which forced rerouting of the Jinsha River at the beginning of Quaternary.  相似文献   

15.
A method of prospecting for the concealed active fault by simultaneous measuring both 218Po and 210Po is introduced.It is a radioactive prospecting.The concentration of radon near the fault can be determined from the activities of its daughters 218Po and 210Po.At the fault,there is a good passage for gases,and the radioative gas from crustal depths can be easy to get to the surface.As a result,the level of the radioactivity there is quite high,but low at both sides far from there.The  相似文献   

16.
The Datong fault belt is a NE trending fault in the northern Qinghai-Xizang （Tibet） Plateau and controls the boundary of the Xining Basin and Datong Basin. It consists of the Maziying- Miaogou （F1） fault and the Laoye Mountain-Nanmenxia fault （F2）. There is obvious displacement in vertical direction along the belt. The field investigation results show that this belt has long-term activity. There are several meters long crushed zones and veins along the fault side in the basement rock. On the fault section, the Cambria system thrusts over the red- brick-colored Quaternary Period gravel, and there is a fault gouge of several centimeters thick developed on the fault plane. The fault gouge date （ESR） on the fault plane is 610 ± 61ka. The covering deluvial loess is not dislocated, and the OSL result is 14.6 ± 1.5ka. So it can be concluded that the fault belt was active in the middle Pleistocene, but inactive in the late Pleistocene according to the age data and geomorphologic features. Interior formations of the Datong basin features fold with the major axis orienting northwest. According to the relation of fault and fold deformation, Datong fault is a trausversal tear, which is due to uneven compression of the folds in different parts and NNE trending regional compressive stress. It is common among the NE trending faults in the northeast of Qinghai-Xizang （Tibet） Plateau. These NE trending faults aren＇t large, and most are located in the active plate. They are all nearly vertical to the axis of the folds and compressive basins.  相似文献   

17.
The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectonics and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely "normal" or "abnormal", and seismic anomalies can be divided into many mutually exclusive "abnormal states". In different conditions of combined time-space-strength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a "two-state" model. But in a "multi-state" model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily.Based on the "multi-state" precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M≥6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M≥6.0 near the faults with a relatively high accuracy and the reliability is 0.5; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The "multi-state" precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.  相似文献   

18.
Severe faults have caused many earthquakes around the world throughout history.More recently,earthquakes have occurred in Taiwan,China(Chi-Chi fault),and elsewhere,causing loss of lives and destroying many buildings and structures.These tectonic movements have gained attention from engineers,and in the past 15 years,the focus has been on faulting mechanisms.In this study,a physical model(1 g)was fabricated and used to evaluate the impact of a reverse fault in a field with a tunnel.In the 1 g model,researchers installed additional gauges on the tunnel,so that all the displacements could be adjusted,and all the responses could be monitored during faulting.An experimental study of various soil properties(cohesion and friction angles)in reverse faults on the tunnel lining were carried out and are described herein.A comparison of results for different levels of soil cohesion revealed that it can dramatically reduce the displacement by as much as 40%,and that friction angles of 27ocan record approximately 60%more displacements than at 37o.Furthermore,a comparison of fault angles of 30oand 60oindicates that the displacements can be different by more than 43%in cohesionless soil and about 64%for a friction angle of 27o.  相似文献   

19.
Based on the seismic station data sets from Sichuan and Yunnan provinces, we employed a multi-step seismic location method (Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block, namely from southern Dawu to the Qiaojia segment. The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault, the Anninghe fault zone, the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe, Anninghe, and Daliangshan presents a complex interaction among faults near the multiple faults intersection region, Shimian, where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20km, which is consistent with the region of the plastic rheology between 14km-19km calculated by Zhu Ailan et al.,(2005).  相似文献   

20.
Active faults in Quaternary unconsolidated sediments are important indicators to determine paleoearthquake events,They can be studied by macroscopic geological survey,but some problems have been encountered,such as invisible active faults.The authors found an approach to solve these problems by microstructural observation.Firstly,oriented original-state samples of Quaternary Unconsolidated sediments in active fault zones are collected.Secondly,the samples are consolidated in laboratory.Thirdly,microstructureal slides are gound in three-dimension coordinate system.Lastly,microstructures are observed in the microscopic field.By this method,the movement properties of active faults can be determined in lack of the support of macroscopic data.The invisible faults in Quaternary unconsolidated sediments can be found and described.The mechanisms of die-out faults can be also studied.oreover,the boundaries between different unconsolidated sediments in engineering sites can be studied to judge whether they are active faults or not.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号