共查询到20条相似文献，搜索用时 23 毫秒
1.
Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
Approximate incremental dynamic analysis using the modal pushover analysis procedure 总被引：2，自引：0，他引：2
Incremental dynamic analysis (IDA)—a procedure developed for accurate estimation of seismic demand and capacity of structures—requires non‐linear response history analysis of the structure for an ensemble of ground motions, each scaled to many intensity levels, selected to cover the entire range of structural response—all the way from elastic behaviour to global dynamic instability. Recognizing that IDA of practical structures is computationally extremely demanding, an approximate procedure based on the modal pushover analysis procedure is developed. Presented are the IDA curves and limit state capacities for the SAC‐Los Angeles 3‐, 9‐, and 20‐storey buildings computed by the exact and approximate procedures for an ensemble of 20 ground motions. These results demonstrate that the MPA‐based approximate procedure reduces the computational effort by a factor of 30 (for the 9‐storey building), at the same time providing results to a useful degree of accuracy over the entire range of responses—all the way from elastic behaviour to global dynamic instability—provided a proper hysteretic model is selected for modal SDF systems. The accuracy of the approximate procedure does not deteriorate for 9‐ and 20‐storey buildings, although their dynamics is more complex, involving several ‘modes’ of vibration. For all three buildings, the accuracy of the MPA‐based approximate procedure is also satisfactory for estimating the structural capacities for the limit states of immediate occupancy, collapse prevention, and global dynamic instability. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
3.
SPO2IDA is introduced, a software tool that is capable of recreating the seismic behaviour of oscillators with complex quadrilinear backbones. It provides a direct connection between the static pushover (SPO) curve and the results of incremental dynamic analysis (IDA), a computer‐intensive procedure that offers thorough demand and capacity prediction capability by using a series of nonlinear dynamic analyses under a suitably scaled suite of ground motion records. To achieve this, the seismic behaviour of numerous single‐degree‐of‐freedom (SDOF) systems is investigated through IDA. The oscillators have a wide range of periods and feature pinching hysteresis with backbones ranging from simple bilinear to complex quadrilinear with an elastic, a hardening and a negative‐stiffness segment plus a final residual plateau that terminates with a drop to zero strength. An efficient method is introduced to treat the backbone shape by summarizing the analysis results into the 16, 50 and 84% fractile IDA curves, reducing them to a few shape parameters and finding simpler backbones that reproduce the IDA curves of complex ones. Thus, vast economies are realized while important intuition is gained on the role of the backbone shape to the seismic performance. The final product is SPO2IDA, an accurate, spreadsheet‐level tool for performance‐based earthquake engineering that can rapidly estimate demands and limit‐state capacities, strength reduction R‐factors and inelastic displacement ratios for any SDOF system with such a quadrilinear SPO curve. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
4.
《地震工程与结构动力学》2018,47(5):1124-1147
Incremental dynamic analysis (IDA) leads to curves expressed in terms of structural response versus intensity, commonly known as the IDA curves. It is known that implementation of IDA usually involves significant computational effort and most often significant scaling of the original records to various intensity levels. Employing as the performance variable the critical demand to capacity ratio (DCR) throughout the structure, which is equal to unity at the onset of the limit state, facilitates the identification of the intensity values at the onset of a desired limit state and hence the implementation of the IDA procedure. Employing the structural response to un‐scaled records and the corresponding regression‐based response predictions (a.k.a., the “Cloud Analysis”) helps in identifying the range of intensity values corresponding to demand to capacity ratio values in the vicinity of unity. The Cloud to IDA procedure for structural fragility assessment is proposed on the premise of exploiting the Cloud Analysis results to obtain the IDA curves both with minimum number of analyses and minimum amount of scaling. The transverse frame of a shear‐critical 7‐story older RC building in Van Nuys, CA, which is modeled in Opensees with fiber‐section considering the flexural‐shear‐axial interactions and the bar slip, is employed as a case study. It is demonstrated, by comparing the results to IDA and other state of the art non‐linear dynamic procedures based on no scaling or spectral‐shape‐compatible scaling, that the Cloud to IDA procedure leads to reliable results in terms of structural fragility and risk for the prescribed limit state. 相似文献
5.
Approximate methods based on the static pushover are introduced to estimate the seismic performance uncertainty of structures having non‐deterministic modeling parameters. At their basis lies the use of static pushover analysis to approximate Incremental Dynamic Analysis (IDA) and estimate the demand and capacity epistemic uncertainty. As a testbed we use a nine‐storey steel frame having beam hinges with uncertain moment–rotation relationships. Their properties are fully described by six, randomly distributed, parameters. Using Monte Carlo simulation with Latin hypercube sampling, a characteristic ensemble of structures is created. The Static Pushover to IDA (SPO2IDA) software is used to approximate the IDA capacity curve from the appropriately post‐processed results of the static pushover. The approximate IDAs allow the evaluation of the seismic demand and capacity for the full range of limit‐states, even close to global dynamic instability. Moment‐estimating techniques such as Rosenblueth's point estimating method and the first‐order, second‐moment (FOSM) method are adopted as simple alternatives to obtain performance statistics with only a few simulations. The pushover is shown to be a tool that combined with SPO2IDA and moment‐estimating techniques can supply the uncertainty in the seismic performance of first‐mode‐dominated buildings for the full range of limit‐states, thus replacing semi‐empirical or code‐tabulated values (e.g. FEMA‐350), often adopted in performance‐based earthquake engineering. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
6.
This paper assesses the influence of cyclic and in‐cycle degradation on seismic drift demands in moment‐resisting steel frames (MRF) designed to Eurocode 8. The structural characteristics, ground motion frequency content, and level of inelasticity are the primary parameters considered. A set of single‐degree‐of‐freedom (SDOF) systems, subjected to varying levels of inelastic demands, is initially investigated followed by an extensive study on multi‐storey frames. The latter comprises a large number of incremental dynamic analyses (IDA) on 12 frames modelled with or without consideration of degradation effects. A suite of 56 far‐field ground motion records, appropriately scaled to simulate 4 levels of inelastic demand, is employed for the IDA. Characteristic results from a detailed parametric investigation show that maximum response in terms of global and inter‐storey drifts is notably affected by degradation phenomena, in addition to the earthquake frequency content and the scaled inelastic demands. Consistently, both SDOF and frame systems with fundamental periods shorter than the mean period of ground motion can experience higher lateral strength demands and seismic drifts than those of non‐degrading counterparts in the same period range. Also, degrading multi‐storey frames can exhibit distinctly different plastic mechanisms with concentration of drifts at lower levels. Importantly, degrading systems might reach a “near‐collapse” limit state at ductility demand levels comparable to or lower than the assumed design behaviour factor, a result with direct consequences on optimised design situations where over‐strength would be minimal. Finally, the implications of the findings with respect to design‐level limit states are discussed. 相似文献
7.
Matjaz Dolsek 《地震工程与结构动力学》2009,38(6):805-825
Incremental dynamic analysis (IDA) has been extended by introducing a set of structural models in addition to the set of ground motion records which is employed in IDA analysis in order to capture record‐to‐record variability. The set of structural models reflects epistemic (modeling) uncertainties, and is determined by utilizing the latin hypercube sampling (LHS) method. The effects of both aleatory and epistemic uncertainty on seismic response parameters are therefore considered in extended IDA analysis. The proposed method has been applied to an example of the four‐storey‐reinforced concrete frame, for which pseudo‐dynamic tests were performed at the ELSA Laboratory, Ispra. The influence of epistemic uncertainty on the seismic response parameters is presented in terms of summarized IDA curves and dispersion measures. The results of extended IDA analysis are compared with the results of IDA analysis, and the sensitivity of the seismic response parameters to the input random variable using the LHS method is discussed. It is shown that epistemic uncertainty does not have significant influence on the seismic response parameters in the range far from collapse, but could have a significant influence on collapse capacity. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
8.
为研究方钢管混凝土框架-钢板剪力墙（SPSW）核心筒结构在不同强度地震下破坏概率,使用拉杆模型作为钢板剪力墙等效模型,与已有试验对比验证各参数有效性。以地震动峰值加速度（PGA）作为地震动强度参数,按照场地条件等要求选择11条地震动记录。以结构最大层间位移角作为损伤指标,对一典型方钢管混凝土框架-钢板剪力墙核心筒结构进行增量动力分析（IDA）,得到IDA曲线簇。基于增量动力分析进行易损性分析,得到易损性曲线,并计算结构的抗倒塌储备系数。结果表明:8度多遇地震作用下,此结构处于正常使用状态。8度设防地震作用下,处于修复后可使用状态。8度罕遇地震作用下,处于生命安全状态。表明该结构具有良好的抗震性能,满足规范中“小震不坏”、“中震可修”和“大震不倒”的抗震设防目标。该结构抗倒塌储备系数大于规范建议值,具有较好的抗倒塌能力。 相似文献
9.
A web‐based methodology for the prediction of approximate IDA curves, which consists of two independent processes, is proposed. The result of the first process is a response database of the SDOF model, whereas the second process involves the prediction of approximate IDA curves from the response database by using n‐dimensional linear interpolation. Such an approach enables user‐friendly prediction of the seismic response parameters with high accuracy. In order to demonstrate the capabilities of the proposed methodology, a web application for the prediction of the approximate 16th, 50th and 84th fractile responses of an RC structure was developed. For the presented case study, the response database was computed for a set of 30 ground motion records and the discrete values of six structural parameters. Very good agreement between the computed and the approximated IDA curves of the four‐storey RC building was observed. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
A methodology has been proposed which can be used to reduce the number of ground motion records needed for the reliable prediction of the median seismic response of structures by means of incremental dynamic analysis (IDA). This methodology is presently limited to predictions of the median IDA curve only. The reduction in the number of ground motion records needed to predict the median IDA curve is achieved by introducing a precedence list of ground motion records. The determination of such a list is an optimization problem, which is solved in the paper by means of (1) a genetic algorithm and (2) a proposed simple procedure. The seismic response of a simple, computationally non‐demanding structural model has been used as input data for the optimization problem. The presented example is a three‐storey‐reinforced concrete building, subjected to two sets of ground motion records, one a free‐field set and the other a near‐field set. It is shown that the median IDA curves can be predicted with acceptable accuracy by employing only four ground motion records instead of the 24 or 30 records, which are the total number of ground motion records for the free‐field and near‐field sets, respectively. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
11.
In this paper, torsional response of nonductile structures with soft‐first‐storey subjected to bidirectional ground motions is studied using a simplified two‐storey model with two‐way eccentricities. The stiffness ratio of second storey to first storey is varied to create different levels of soft‐first‐storey effect, while the stiffness eccentricity is varied to create torsional effects. Different overstrength ratios are used in the simplified models to study the response of structure with different structural capacity. Hysteretic model with strength deterioration and stiffness degradation properties is used to capture the deterioration of element stiffness and strength. Ductility capacity of 2.0 is used as the models are for nonductile structures. In general, displacement amplification of irregular model with respect to regular model increases as stiffness ratio increases, while no consistent trend of changes in displacement amplification is found with increase in stiffness eccentricity. It is found that the displacement amplification due to only soft‐first‐storey effect can be conservatively taken as 1.5. Coupling of torsional and soft‐first‐storey effects is more significant in affecting the displacement amplification of elements at flexible side. The trend of changes in displacement amplification of elastic system is similar to that of inelastic system. The displacement amplification of elements at the flexible side is larger than that at the stiff side. The elements at the flexible side in the direction of shorter uncoupled lateral period have larger displacement response than those in the orthogonal direction. Ductility demand–capacity curves subsequently constructed can be used to approximately assess the seismic performance of existing structures and as guidelines for designing structures in Singapore to withstand the maximum credible earthquake considering the coupling of torsional and soft‐first‐storey effects. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
12.
基于性能的地震工程研究的新进展及对结构非线性分析的要求 总被引：4，自引：0，他引：4
结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。 相似文献
13.
Reliability of U‐shaped steel dampers used in base‐isolated structures subjected to biaxial excitation 
下载免费PDF全文
下载免费PDF全文 A reliable performance of anti‐seismic devices when the upper‐structure is subjected to strong biaxial seismic excitation is of vital importance to ensure the latter doesn't reach critical behavior. U‐shaped steel dampers are hysteretic devices used to dissipate the earthquake‐induced energy of base‐isolated structures. In the framework of performance‐based design, which is gaining more and more recognition, it is of particular importance to assess the performance of base‐isolated structures with such dampers under different intensity levels of bidirectional ground motion. To achieve this goal, an analytical model able to simulate the bidirectional displacement response of an isolation system is adopted. Incremental dynamic analysis (IDA) is used to obtain the relation between the earthquake‐induced bidirectional damage of U‐shaped steel dampers and different intensity levels of the considered records. The performance of the dampers is categorized into 5 levels delimited by 4 limit states for which fragility curves are derived. The results obtained using the bidirectional approach are quantitatively compared to those given by employing an in‐plane model (widely used in current design practices in Japan) with the purpose of assessing whether the latter provides unconservative estimates of the performance of the dampers. The main conclusion is that, for large seismic intensities, the safety margin against fracture of the dampers is significantly overestimated when an in‐plane model is adopted. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
14.
A. Braconi O. S. Bursi G. Fabbrocino W. Salvatore F. Taucer R. Tremblay 《地震工程与结构动力学》2008,37(14):1635-1655
This paper presents the results of a multi‐level pseudo‐dynamic seismic test program that was performed to assess the performance of a full‐scale three‐bay, two‐storey steel–concrete composite moment‐resisting frame built with partially encased composite columns and partial‐strength beam‐to‐column joints. The system was designed to develop a ductile response in the joint components of beam‐to‐column joints including flexural yielding of beam end plates and shear yielding of the column web panel zone. The ground motion producing the damageability limit state interstorey drift caused minor damage while the ultimate limit state ground motion level entailed column web panel yielding, connection yielding and plastic hinging at the column base connections. The earthquake level chosen to approach the collapse limit state induced more damage and was accompanied by further column web panel yielding, connection yielding and inelastic phenomena at column base connections without local buckling. During the final quasi‐static cyclic test with stepwise increasing displacement–amplitudes up to an interstorey drift angle of 4.6%, the behaviour was ductile although cracking of beam‐to‐end‐plate welds was observed. Correlations with numerical simulations taking into account the inelastic cyclic response of beam‐to‐column and column base joints are also presented in the paper together. Inelastic static pushover and time history analysis procedures are used to estimate the structural behaviour and overstrength factors of the structural system under study. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Yong Lu 《地震工程与结构动力学》2002,31(1):79-97
The wall–frame systems have many known advantages, namely increase of the system's lateral strength and stiffness thereby allowing for a good tangential inter‐storey drift control, and the retention of a satisfactory energy dissipation capacity. However, rocking of the wall could occur as a result of uplifting wall base or concentrated plastic hinge deformations. Problems arising from this phenomenon have significant impact on the system behaviour and hence require extended study. This paper focuses on the wall‐rocking phenomenon due to the concentrated plastic hinge rotation at the wall base. To facilitate a comprehensive evaluation, a six‐storey three‐bay RC wall–frame structure is investigated with comparison to a bare ductile frame by means of earthquake simulation tests. The results revealed that, despite a superior performance over the ductile frame under low to moderate seismic actions, the wall–frame structure deteriorated more rapidly than the bare frame during advanced inelastic response. The increasingly significant rocking of the wall resulted in severe material damage at localized critical regions. Mitigating the wall rocking is seen to be a key to the further improvement of the system performance, and the extent to which this may be achieved by incorporating the three‐dimensional effects is explicitly illustrated by an analytical evaluation. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
16.
A new concept to determine state of the damage in concrete gravity dams is introduced. The Pine Flat concrete gravity dam has been selected for the purpose of the analysis and its structural capacity, assuming no sliding plane and rigid foundation, has been estimated using the two well‐known methods: nonlinear static pushover (SPO) and incremental dynamic analysis (IDA). With the use of these two methods, performance and various limit states of the dam have been determined, and three damage indexes have been proposed on the basis of the comparison of seismic demands and the dam's capacity. It is concluded that the SPO and IDA can be effectively used to develop indexes for seismic performance evaluation and damage assessment of concrete gravity dams. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
17.
Seismic response analysis using characteristic ground motion records for risk‐based decision‐making (3R method) 下载免费PDF全文
下载免费PDF全文 The concept of intensity‐based assessment for risk‐based decision‐making is introduced. It is realized by means of the so‐called 3R method (response analysis, record selection and risk‐based decision‐making), which can be used to check the adequacy of design of a new building or of the strengthening of an existing building by performing conventional pushover analysis and dynamic analysis for only a few ground motions, which are termed characteristic ground motions. Because the objective of the method is not a precise assessment of the seismic risk, a simple decision model for risk acceptability can be introduced. The engineer can decide that the reliability of a no‐collapse requirement is sufficient when collapse is observed in the case of less than half of, for example, seven characteristic ground motions. From the theoretical point of view, it is shown that the accuracy of the method is acceptable if the non‐linear response history analyses are performed at a low percentile of limit‐state intensity, which is also proven by means of several examples of multi‐storey reinforced concrete frame buildings. The 3R method represents a compromise between the exclusive use of either pushover analysis or dynamic analysis and can be easily introduced into building codes provided that its applicability is further investigated (e.g. asymmetric structures and other performance objectives) and that the procedure for the selection of characteristic ground motions is automated and readily available to engineers (www.smartengineering.si). 相似文献
18.
Hossein Ebrahimian Fatemeh Jalayer Domenico Asprone Anna M. Lombardi Warner Marzocchi Andrea Prota Gaetano Manfredi 《地震工程与结构动力学》2014,43(14):2179-2197
Operative seismic aftershock risk forecasting can be particularly useful for rapid decision‐making in the presence of an ongoing sequence. In such a context, limit state first‐excursion probabilities (risk) for the forecasting interval (a day) can represent the potential for progressive state of damage in a structure. This work lays out a performance‐based framework for adaptive aftershock risk assessment in the immediate post‐mainshock environment. A time‐dependent structural performance variable is adopted in order to measure the cumulative damage in a structure. A set of event‐dependent fragility curves as a function of the first‐mode spectral acceleration for a prescribed limit state is calculated by employing back‐to‐back nonlinear dynamic analyses. An epidemic‐type aftershock sequence model is employed for estimating the spatio‐temporal evolution of aftershocks. The event‐dependent fragility curves for a given limit state are then integrated together with the probability distribution of aftershock spectral acceleration based on the epidemic‐type aftershock sequence aftershock hazard. The daily probability of limit state first‐excursion is finally calculated as a weighted combination of the sequence of limit state probabilities conditioned on the number of aftershocks. As a numerical example, daily aftershock risk is calculated for the L'Aquila 2009 aftershock sequence (central Italy). A representative three‐story reinforced concrete frame with infill panels, which has cyclic strength and stiffness degradation, is used in order to evaluate the progressive damage. It is observed that the proposed framework leads to a sound forecasting of limit state first‐excursion in the structure for two limit states of significant damage and near collapse. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
19.
结构在主震作用下发生损伤,由于刚度和强度退化导致结构周期的延长,再加上高阶周期的影响,在随后的余震对主震损伤结构抗震性能的影响分析中,基于弹性周期的传统谱加速度可能不适用,有必要对地震动强度指标的选择进行进一步研究。本文以9层Benchmark钢框架为研究对象,选取10种地震动强度指标,分别从离散性和相关性两个维度对比分析了其在余震IDA分析中的优劣性。研究结果表明:与最大层间位移角相比,最大残余层间位移角更能够准确地量化主震对结构造成的损伤;对于钢框架结构,基于一段周期的几何平均谱加速度的IMBoj&Lev指标是最优的地震动强度指标,相对于Sa（T1）离散性降低了30%左右,相关性提高了6%左右。 相似文献
20.
Several seismic design codes around the world restrict the use of theit Equivalent Lateral Force analysis method to structures satisfying structural regularity limits. These regularity limits are based on engineering judgement and lack quantitative justification. One common irregularity is that of a change in vertical stiffness over the building height. This stiffness irregularity is almost always associated with a change in vertical strength over the building height. For this reason, the effect of various realistic combinations of stiffness–strength irregularity in shear‐type buildings is evaluated to quantify regularity limits. Structures analysed had 3, 5, 9 and 15 storeys, and the floor mass at all the levels were kept the same. Both regular and irregular structures were designed in accordance with the Equivalent Lateral Force procedure to produce the same engineering demand parameter. Structural ductility factors of 1, 2, 3, 4 and 6, and target (design) interstorey drift ratios ranging between 0.5 and 3%, were used in this study. The irregular structures were created by modifying specific storey lateral stiffnesses from that of the regular structure. Strengths at these storeys were also modified to ensure realistic relationships between stiffness and strength. The modified structures were then redesigned until the target interstorey drift ratio was achieved at the critical storey. Inelastic dynamic time‐history analysis was conducted to compare the maximum interstorey drift ratio demands of the regular and irregular structures. Simple equations were developed to estimate possible variations in demand due to vertical stiffness–strength irregularity applied at critical locations in structures. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献