首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Moraines that dam proglacial lakes pose an increasing hazard to communities in the Andes and other mountain ranges. The moraines are prone to failure through collapse, overtopping by lake waters or the effect of displacement waves resulting from ice and rock avalanches. Resulting floods have led to the loss of thousands of lives in the Cordillera Blanca mountains of Peru alone in the last 100 years. On 22 April 2002 a rock avalanche occurred immediately to the south‐west of Laguna Safuna Alta, in the Cordillera Blanca. The geomorphic evidence for the nature, magnitude and consequences of this event was investigated in August 2002. Field mapping indicated that the avalanche deposited 8–20 × 106 m3 of rock into the lake and onto the surface of the frontal region of Glaciar Pucajirca, which flows into the lake. Repeated bathymetric surveying indicated that ～5 × 106 m3 of this material was deposited directly into the lake. The immediate effect of this event was to create a displacement wave that gained in height as it travelled along the lake basin, overtopping the impounding moraine at the lake's northern end. To achieve overtopping, the maximum wave height must have been greater than 100 m. This, and subsequent seiche waves, caused extensive erosion of both the proximal and distal faces of the impounding terminal moraine. Further deep gullying of the distal face of this moraine resulted from the supply of pressurized water to the face via a relief overflow tunnel constructed in 1978. Two‐dimensional, steady‐state analysis of the stability of the post‐avalanche moraine rampart indicates that its proximal face remains susceptible to major large‐scale rotational failure. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

2.
Cosmogenic exposure dating of moraines during the last two decades has vastly improved knowledge on the timing of glaciation worldwide. Due to a variety of geologic complications, such as moraine degradation, snow cover, bedrock erosion and isotopic inheritance, samples from multiple large boulders (>1–2 m) often lead to the most accurate moraine age assignments. However, in many cases, large boulders are not available on moraines of interest. Here, I test the suitability of pebble collections from moraine crest surfaces as a sample type for exposure dating. Twenty-two 10Be ages from two Pleistocene lateral moraine crests in Pine Creek valley in the upper Arkansas River basin, Colorado, were calculated from both pebble and boulder samples. Ten 10Be ages from a single-crested Bull Lake lateral moraine range between 3 and 72 ka, with no statistical difference between pebble (n = 5) and boulder (n = 5) ages. The lack of a cluster of 10Be ages suggests that moraine degradation has led to anomalously young exposure ages. Twelve 10Be ages from a single-crested Pinedale lateral moraine have a bimodal age distribution; one mode is 22.0 ± 1.4 ka (three boulders, two pebble collections), the other is 15.2 ± 0.9 ka (two boulders, five pebble collections). The interpretation of the two age modes is that two glacier maxima of similar extent were attained during the late Pleistocene. Regardless of moraine age interpretations, that 10Be ages from pebble collections and boulders are indistinguishable on moraines of two different ages, and in two different age modes of the Pinedale moraine, suggests that pebble collections from moraine crests may serve as a suitable sample type in some settings.  相似文献   

3.
Glacier recession and landform development in a debris‐charged glacial landsystem characterized by an overdeepening is quantified using digital photogrammetry, digital elevation model (DEM) construction and mapping of the Icelandic glacier Kvíárjökull for the period 1945–2003. Melting of ice‐cores is recorded by surface lowering rates of 0·8 m yr–1 (1945–1964), 0·3 m yr–1 (1964–1980), 0·015 m yr–1 (1980–1998) and 0·044 m yr–1 (1998–2003). The distribution/preservation of pushed and stacked ice‐cored moraine complexes are determined by the location of the long‐term glacial drainage network in combination with retreat from the overdeepening, into which glacifluvial sediment is being directed and where debris‐rich ice masses are being reworked and replaced by esker networks produced in englacial meltwater pathways that bypassed the overdeepening and connected to outwash fans prograding over the snout. Recent accelerated retreat of Kvíárjökull, potentially due to increased mass balance sensitivity, has made the snout highly unstable, especially now that the overdeepening is being uncovered and the snout flooded by an expanding pro‐glacial, and partially supraglacial, lake. This case study indicates that thick sequences of debris‐charged basal ice/controlled moraine have a very low preservation potential but ice‐cored moraine complexes can develop into hummocky moraine belts in de‐glaciated terrains because they are related to the process of incremental stagnation, which at Kvíárjökull has involved periodic switches from transport‐dominant to ablation‐dominant conditions. Glacier recession is therefore recorded temporally and spatially by two suites of landforms relating to two phases of landform production which are likely typical for glaciers occupying overdeepenings: an early phase of active, temperate recession recorded by push moraines and lateral moraines and unconfined pro‐glacial meltwater drainage; and a later phase of incremental stagnation and pitted outwash head development initiated by the increasing topographic constraints of the latero‐frontal moraine arc and the increasing importance of the overdeepening as a depo‐centre. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

4.
Pyroclastic flow emplacement is strongly influenced by eruption column height. A surface along which kinetic energy is zero theoretically connects the loci of eruption column collapse with all coeval ignimbrite termini. This surface is reconstructed as a two-dimensional energy line for the 1912 Katmai pyroclastic flow in the Valley of Ten Thousand Smokes from mapped flow termini and the runup of the ignimbrite onto obstructions and through passes. Extrapolation of the energy line to the vicinity of the source vent at Novarupta suggests the eruption column which generated the ignimbrite eruption was approximately 425 m high. The 1912 pyroclastic flow travelled about 25 km downvalley. Empirical velocity data calculated from runup elevations and surveyed centrifugal superelevations indicate initial velocities near Novarupta were greater than 79–88 m s–1. The flow progressively decelerated and was travelling only 2–8 m s–1 when it crossed a moraine 16 km downvalley. The constant slope of the energy line away from Novarupta suggests the flow was systematically slowed by internal and basal friction. Using a simple physical model to calculate flow velocities and a constant kinetic friction coefficient (Heim coefficient) of 0.04 derived from the reconstructed energy line, the flow is estimated to have decelerated at an average rate of –0.16 m s–2 and to have taken approximately 9.5 minutes to travel 25 km down the Valley of Ten Thousand Smokes. The shear strength of the flowing ignimbrite at the moraine was approximately 0.5 kPa, and its Bingham viscosity when it crossed the moraine was 3.5 × 103 P. If the flow was Newtonian, its viscosity was 4.2 × 103 P. Reynolds and Froude numbers at the moraine were only 41–62 and 0.84–1.04, respectively, indicating laminar, subcritical flow.  相似文献   

5.
We use cosmogenic 10Be concentrations in amalgamated rock samples from active, ice‐cored medial moraines to constrain glacial valley sidewall backwearing rates in the Kichatna Mountains, Alaska Range, Alaska. This dramatic landscape is carved into a small ～65 Ma granitic pluton about 100 km west of Denali, where kilometer‐tall rock walls and ‘cathedral’ spires tower over a radial array of over a dozen valley glaciers. These supraglacial landforms erode primarily by rockfall, but erosion rates are difficult to determine. We use cosmogenic 10Be to measure rockwall backwearing rates on timescales of 103–104 years, with a straightforward sampling strategy that exploits ablation‐dominated medial moraines. A medial moraine and its associated englacial debris serve as a conveyor system, bringing supraglacial rockfall debris from accumulation‐zone valley walls to the moraine crest in the ablation zone. We discuss quantitatively several factors that complicate interpretation of cosmogenic concentrations in this material, including the complex scaling of production rates in very steep terrain, the stochastic nature of the rockfall erosion process, the unmixed nature of the moraine sediment, and additional cosmogenic accumulation during transport of the sediment. We sampled medial moraines on each of three glaciers of different sizes and topographic aspects. All three moraines are sourced in areas with identical rock and similar sidewall relief of ～1 km. Each sample was amalgamated from 25 to 35 clasts collected over a 1‐km longitudinal transect of each moraine. Two of the glaciers yield similar 10Be concentrations (～1·6–2·2 × 104 at/g) and minimum sidewall slope‐normal erosion rates (～0·5–0·7 mm/yr). The lowest 10Be concentrations (8 × 103 at/g) and the highest erosion rates (1·3 mm/yr) come from the largest glacier in the range with the lowest late‐summer snowline. These rates are reasonable in an alpine glacial setting, and are much faster than long‐term exhumation rates of the western Alaska Range as determined by thermochronometric studies. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
Neogene Yamadağı volcanic rocks consist of basaltic trachyandesite, trachyandesite, andesite, and dacite. The major- and trace-element chemistry indicates that the lavas are dominantly calc-alkaline and mildly alkaline in character, sodic in nature, and intermediate to acidic in composition. REE and trace-element patterns of volcanic rocks are similar to those typical of within plate magmatics. Volcanic rocks have low 87Sr/86Sr (0.70389–0.70633) and high 143Nd/144Nd ratios (0.51267–0.51276) and mostly plot within the mantle array of the isotope ratio diagram. The linear correlations among 87Sr/86Sr−143Nd/144Nd, SiO2−87Sr/86Sr and SiO2−143Nd/144Nd isotope ratios in the volcanics suggest that fractional crystallization combined with minor assimilation was an important process within the collision zone.  相似文献   

7.
The Hakusan volcano, central Japan, is located in a region where two subducting plates (the Pacific Plate and the Philippine Sea Plate) overlap near the junction of four plates adjacent to the Japanese Islands (the Pacific Plate, the Philippine Sea Plate, the Eurasia Plate, and the North American Plate). The Hakusan volcano consists of products from four major volcanic episodes: Kagamuro, Ko‐hakusan, and Shin‐Hakusan I and II. To date the eruption events of the Hakusan volcano we applied thermoluminescence and fission track methods. 238U(234U)–230Th disequilibrium and 206Pb/238U methods were applied to date the zircon crystallization ages for estimating the magma residence time before the eruptions. The eruption ages we obtained are ca 250 ka for Kagamuro, ca 100 ka and ca 60 ka for Ko‐Hakusan, ca 50 ka for Shin‐Hakusan I, and <10 ka for Shin‐Hakusan II. They are concordant with previous reports based on K–Ar dating. Some of the pyroclastic rocks, possibly originating from Shin‐Hakusan II activities, are dated to be ca 36 ka or 50 ka, and belong to the Shin‐Hakusan I activity. The zircon crystallization ages show several clusters prior to eruption. The magma residence time was estimated for each volcanic activity by comparing the major crystallization events and eruption ages, and we found a gradual decrease from ca. 500 ky for the Kagamuro activity to ca. 5 ky for the Shin‐Hakusan II activity. This decrease in residence time may be responsible for the decrease in volume of erupted material estimated from the current topography of the region. The scale of volcanic activity, which was deduced from the number of crystallized zircons, is more or less constant throughout the Hakusan volcanic activity. Therefore, the decrease in magma residence time is most likely the result of stress field change.  相似文献   

8.
Recession of high‐mountain glaciers in response to climatic change frequently results in the development of moraine‐dammed glacial lakes. Moraine dam failure is often accompanied by the release of large volumes of water and sediment, termed a Glacial Lake Outburst Flood (GLOF). Chukhung Glacier is a small (~3 km2) receding valley glacier in Mt. Everest (Sagarmatha) National Park, Nepal. Unlike many Himalayan glaciers, which possess a thick mantle of supraglacial debris, its surface is relatively clean. The glacier terminus has receded 1.3 km from its maximum Holocene position, and in doing so provided the space for an ice‐contact moraine‐dammed lake to develop. The lake had a maximum volume of 5.5 × 105 m3 and drained as a result of breaching of the terminal moraine. An estimated 1.3 × 105 m3 of material was removed from the terminal moraine during breach development. Numerical dam‐breach modelling, implemented within a Generalised Likelihood Uncertainty Estimation (GLUE) framework, was used to investigate a range of moraine‐dam failure scenarios. Reconstructed outflow peak discharges, including failure via overtopping and piping mechanisms, are in the range 146–2200 m3 s‐1. Results from two‐dimensional hydrodynamic GLOF modelling indicate that maximum local flow depths may have exceeded 9 m, with maximum flow velocities exceeding 20 m s‐1 within 700 m of the breach. The floodwaters mobilised a significant amount of material, sourced mostly from the expanding breach, forming a 300 m long and 100 m wide debris fan originating at the breach exit. moraine‐dam. These results also suggest that inundation of the entire floodplain may have been achieved within ten minutes of initial breach development, suggesting that debris fan development was rapid. We discuss the key glaciological and geomorphological factors that have determined the evolution of a hazardous moraine‐dammed lake complex and the subsequent generation of a GLOF and its geomorphological impact. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

9.
It is generally considered that four-times ice age happened during the Quaternary epoch on the Tibetan Plateau. However, the research on the chronology of the four-times ice age is far from enough. The Shaluli Mountain on the Southeastern Tibetan Plateau is an ideal place for plaeo-glacier study, because there are abundant Quaternary glacial remains there. This paper discusses the ages of the Quaternary glaciations, based on the exposure dating of roche moutonnée, moraines and glacial erosion surfaces using in situ cosmogenic isotopes 10Be. It is found that the exposure age of the roche moutonnée at Tuershan is 15 ka, corresponding to Stage 2 of the deep-sea oxygen isotope, suggesting that the roche moutonnée at Tuershan is formed in the last glacial maximum. The exposure age of glacial erosion surface at Laolinkou is 130–160 ka, corresponding to Stage 6 of the deep-sea oxygen isotope. The oldest end moraine at Kuzhaori may form at 421–766 kaBP, corresponding to Stages 12–18 of the deep-sea oxygen isotope. In accordance with the climate characteristic of stages 12, 14, 16 and 18 reflected by the deep-sea oxygen isotope, polar ice cores and loess sequence, the oldest end moraine at Kuzhaori may form at stage 12 or stage 16, the latter is more possible.  相似文献   

10.
Recession flows of a basin provide valuable information about its storage–discharge relationship as during recession periods discharge occurs due to depletion of storage. Storage–discharge analysis is generally performed by plotting ?dQ/dt against Q , where Q is discharge at time t . For most real world catchments, ?dQ/dt versus Q show a power‐law relationship of the type: ?dQ/dt = kQα . Because the coefficient k varies across recession events significantly, the exponent α needs to be computed separately for individual recession events. The median α can then be considered as the representative α for the basin. The question that arises here is what are the basin characteristics that influence the value of α ? Studies based on a small number of basins (up to 50 basins) reveal that α has good relationship with several basin characteristics. However, whether such a relationship is universal remains an important question, because a universal relationship would allow prediction of the value of α for any ungauged basin. To test this hypothesis, here, we study data collected from a relatively large number of basins (358 basins) in USA and examine the influence of 35 different physio‐climatic characteristics on α . We divide the basins into 2 groups based on their longitudes and test the relationship between α and basin characteristics separately for the two groups. The results indicate that α is not identically influenced by different basin characteristics for the two datasets. This may suggest that the power‐law exponent α of a region is determined by the way local physio‐climatic forces have shaped the landscape.  相似文献   

11.
Glacier retreat results in the formation and expansion, and sometimes outburst, of moraine‐dammed lakes worldwide. Sudden outburst floods from such lakes have caused enormous damage to settlements and infrastructure located downstream. Such lakes located in the Himalayan region are highly prone to outburst floods due to climatic conditions and geotectonic settings. In this study, multi‐temporal Landsat images from 2002–2014, digital elevation models (DEMs), geomorphic analysis and modelling were used to assess the changes in glacial lakes and the outburst susceptibility of moraine‐dammed lakes in the Chandra–Bhaga basin of the north‐western Indian Himalaya. An inventory of lakes was developed using satellite data, thematic maps and ground‐based investigations for the Chandra–Bhaga basin. The total area of all glacial lakes (size >5000 m2) increased by 47% from 2002 to 2014, with a pronounced increase of 57% for moraine‐dammed lakes. Sixteen moraine‐dammed lakes were identified and assessed for outburst susceptibility using the analytic hierarchy process (AHP). Forty‐one reported glacial lake outburst flood (GLOF) events from moraine‐dammed lakes in Himalayan regions were analysed, culminating in the identification of 11 critical factors for assessing outburst susceptibility using the AHP, including those related to the lake area and change, surrounding terrain characteristics, dam geometry, regional seismicity and rainfall history. The past three GLOF events in the Himalayan region were used to validate the method and to classify moraine‐dammed lakes as having very high, high, medium or low outburst susceptibility. Eight lakes classified as very high and high outburst susceptibility should be further investigated in detail. The proposed AHP‐based approach is suitable for first‐order identification of critical lakes for prioritising future detailed investigation and monitoring of moraine‐dammed glacial lakes in the Himalayan region. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

12.
A typical agricultural water reservoir (AWR) of 2400 m2 area and 5 m depth, located in a semi‐arid area (southern Spain), was surveyed on a daily basis for 1 year. The annual evaporation flux was 102·7 W m?2, equivalent to an evaporated water depth of 1310 mm year?1. The heat storage rate G exhibited a clear annual cycle with a peak gain in April (G ～ 45 W m?2) and a peak loss in November (G ～ 40 W m?2), leading to a marked annual hysteretic trend when evaporation (λE) was related to net radiation (Rn). λE was strongly correlated with the available energy A, representing 91% of the annual AWR energy loss. The sensible heat flux H accounted for the remaining 9%, leading to an annual Bowen ratio in the order of 0·10. The equilibrium and advective evaporation terms of the Penman formula represented 76 and 24%, respectively, of the total evaporation, corresponding to a annual value of the Priestley–Taylor (P–T) coefficient (α) of 1·32. The P–T coefficient presented a clear seasonal pattern, with a minimum of 1·23 (July) and a maximum of 1·65 (December), indicating that, during periods of limited available energy, AWR evaporation increased above the potential evaporation as a result of the advection process. Overall, the results stressed that accurate prediction of monthly evaporation by means of the P–T formula requires accounting for both the annual cycle of storage and the advective component. Some alternative approaches to estimating Rn, G and α are proposed and discussed. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

13.
The hydrology of near‐surface glacier ice remains a neglected aspect of glacier hydrology despite its role in modulating meltwater delivery to downstream environments. To elucidate the hydrological characteristics of this near‐surface glacial weathering crust, we describe the design and operation of a capacitance‐based piezometer that enables rapid, economical deployment across multiple sites and provides an accurate, high‐resolution record of near‐surface water‐level fluctuations. Piezometers were employed at 10 northern hemisphere glaciers, and through the application of standard bail–recharge techniques, we derive hydraulic conductivity (K) values from 0.003 to 3.519 m day?1, with a mean of 0.185 ± 0.019 m day?1. These results are comparable to those obtained in other discrete studies of glacier near‐surface ice, and for firn, and indicate that the weathering crust represents a hydrologically inefficient aquifer. Hydraulic conductivity correlated positively with water table height but negatively with altitude and cumulative short‐wave radiation since the last synoptic period of either negative air temperatures or turbulent energy flux dominance. The large range of K observed suggests complex interactions between meteorological influences and differences arising from variability in ice structure and crystallography. Our data demonstrate a greater complexity of near‐surface ice hydrology than hitherto appreciated and support the notion that the weathering crust can regulate the supraglacial discharge response to melt production. The conductivities reported here, coupled with typical supraglacial channel spacing, suggest that meltwater can be retained within the weathering crust for at least several days. Not only does this have implications for the accuracy of predictive meltwater run‐off models, but we also argue for biogeochemical processes and transfers that are strongly conditioned by water residence time and the efficacy of the cascade of sediments, impurities, microbes, and nutrients to downstream ecosystems. Because continued atmospheric warming will incur rising snowline elevations and glacier thinning, the supraglacial hydrological system may assume greater importance in many mountainous regions, and consequently, detailing weathering crust hydraulics represents a research priority because the flow path it represents remains poorly constrained.  相似文献   

14.
Thirty‐six runoff plot experiments provide data on flow depths, speeds, and Darcy–Weisbach friction coefficients (f) on bare soil surfaces, and surfaces to which were added sufficient extra plant litter or surface stones to provide projected cover of 5, 10 and 20 per cent. Precision flow depth data were derived with a computer‐controlled gantry and needle gauge for two different discharges for each plot treatment. Taking a fixed flow intensity (Reynolds number, Re = 150) for purposes of comparison shows means of f = 17·7 for bare soil surfaces, f = 11·4 for added stone treatments, and f = 23·8 for added litter treatments. Many individual values of f for stone treatments are lower than for the bare soil surface, but all litter treatments show increases in fcompared to bare soil. The lowering of f in stone treatments relates to the submerged volume that the stones occupied, and the associated concentration of flow onto a smaller part of the plot surface. This leads to locally higher flow intensities and lower frictional drag along threads of flow that the obstacles create. Litter causes higher frictional drag because the particles are smaller, and, for the same cover fraction, are 100 times more numerous and provide 20 times the edge or perimeter length. Along these edges, which in total exceed 2·5 m g?1 (equivalent to 500 m m?2 for a loading of 2 t ha?1), surface tension draws up water from between the litter particles. This reduces flow depth there, and as a consequence of the lower flow intensity, frictional drag rises. Furthermore, no clear passage remains for the establishment of flow threads. These findings apply to shallow interrill flows in which litter is largely immobile. The key new result from these experiments is that under these conditions, a 20 per cent cover of organic litter can generate interrill frictional retardation that exceeds by nearly 41 per cent that of a bare soil surface, and twice that contributed by the same cover fraction of surface stones. Even greater dominance by litter can be anticipated at the many dryland sites where litter covers exceed those tested here. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

15.
Self-potential (SP) and electrical resistivity measurements are used to investigate seepage at a remote moraine dam in the Sierra Nevada of California. The site is a small terminal moraine impounding roughly 300,000 m3 of water at ~ 3400 m a.s.l. Suspicious fine sediment in a small lake at the dam's downstream toe prompted initial concerns that anomalous seepage may be eroding matrix material from the moraine. 235 individual SP measurements covering the surface of the dam were collected in order to investigate electrokinetic current sources resulting from seepage, while resistivity soundings probed moraine stratigraphy and suggest that the till contains interstitial ice. Contoured SP data reveal a non-uniform voltage distribution over the moraine dam and two distinct negative SP anomalies. The first, located in the central area of the moraine, shows a broad negative SP zone around the crest and increasingly positive SP moving downhill towards both the upstream and downstream toes. This anomaly can be explained by shallow gravitational groundwater flow in the near subsurface combined with upward groundwater flux through evapotranspiration; numerical simulation of the combined effect matches field data well. The second SP anomaly has a tightly localized distribution and can be explained by vertically descending flow into a bedrock fault conduit. Our conceptual seepage model suggests that flow travels from Dana Lake first at the boundary of ice-filled moraine and bedrock before converging on a concentrated channel in the subvertical fault zone. Positive SP near the dam abutments results from groundwater inflow from adjacent hillslopes. Combined analyses suggest that seepage erosion is not currently affecting the moraine dam, and that the sediment observed on the bed of the downstream toe lake is likely a remnant of past outflow events.  相似文献   

16.
Chronologies of glacial advances during the last glacial period in the Nyainqentanglha mountain range may provide constraints on the past climate in a transition zone of the Asian monsoon.We present 15 new10Be exposure ages from two moraines in the Payuwang valley,on the north slope of the range.The inner moraine has exposure ages ranging from 18.0±1.7 to 30.6±2.8 ka(n=10),with a mean age of 23.8±4.0 ka,corresponding to the global Last Glacial Maximum(LGM).The outer moraine yields exposure ages ranging from 18.0±1.6 to 39.9±3.7 ka(n=5).Evidence for weathering leads us to view the oldest age as a minimum age,placing moraine formation during MIS3.Chronologies from the last glacial period from south slope of the Nyainqentanglha support this interpretation.Thus,there appears to have been a local LGM(LLGM)during MIS3 and a more limited glacial advance during the global LGM.Glacial advances during MIS3 in the Nyainqentanglha may correlate with millennial-scale climate change(Heinrich events).  相似文献   

17.
Supra‐glacial lakes and ponds can create hotspots of mass loss on debris‐covered glaciers. While much research has been directed at understanding lateral lake expansion, little is known about the rates or processes governing lake deepening. To a large degree, this knowledge gap persists due to sparse observations of lake beds. Here we report on the novel use of ground penetrating radar (GPR) surveys to simultaneously collect supra‐glacial lake bathymetry and bottom composition data from Spillway Lake (surface area of 2.4 × 105 m2; volume of 9.5 × 104 m3), which is located in the terminus region of the Ngozumpa Glacier in the Khumbu region of the Nepal Himalaya. We identified two GPR bottom signals corresponding to two sedimentary facies of (1) sub‐horizontal layered fine sediment drape and (2) coarse blocky diamict. We provide an understanding of the changes in subaqueous debris distribution that occur through stages of lake expansion by combining the GPR results with in situ observations of shoreline deposits matching the interpreted facies. From this, we present an updated conceptual model of supra‐glacial lake evolution, with the addition of data on the evolving debris environment, showing how dominant depositional processes can change as lakes evolve from perched lakes to multi‐basin base‐level lakes and finally onto large moraine‐dammed lakes. Throughout lake evolution, processes such as shoreline steepening, lakebed collapse into voids and conduit interception, subaerial and subaqueous calving and rapid areal expansion alter the spatial distribution and makeup of lakebed debris and sediments forcing a number of positive and negative feedbacks on lake expansion. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

18.
The morphology and composition of spinel in rapidly quenched Pu’u ’O’o vent and lava tube samples are described. These samples contain glass, olivine phenocrysts (3–5 vol.%) and microphenocrysts of spinel (0.05 vol.%). The spinel surrounded by glass occurs as idiomorphic octahedra 5–50 μm in diameter and as chains of octahedra that are oriented with respect to each other. Spinel enclosed by olivine phenocrysts is sometimes rounded and does not generally form chains. The temperature before quenching was calculated from the MgO content of the glass and ranges from 1150°C to 1180°C. The oxygen fugacity before quenching was calculated by two independent methods and the log fO2 ranged from −9.2 to −9.9 (delta QFM=−1). The spinel in the Pu’u ’O’o samples has a narrow range in composition with Cr/(Cr+Al)=0.61 to 0.73 and Fe2+/(Fe2++Mg)=0.46 to 0.56. The lower the calculated temperature for the samples, the higher the average Fe2+/(Fe2++Mg), Fe3+ and Ti in the spinel. Most zoned spinel crystals decrease in Cr/(Cr+Al) from core to rim and, in the chains, the Cr/(Cr+Al) is greater in the core of larger crystals than in the core of smaller crystals. The occurrence of chains and hopper crystals and the presence of Cr/(Cr+Al) zoning from core to rim of the spinel suggest diffusion-controlled growth of the crystals. Some of the spinel crystals may have grown rapidly under the turbulent conditions of the summit reservoir and in the flowing lava, and the crystals may have remained in suspension for a considerable period. The rapid growth may have caused very local (μm) gradients of Cr in the melt ahead of the spinel crystal faces. The crystals seem to have retained the Cr/(Cr+Al) ratio that developed during the original growth of the crystal, but the Fe2+/(Fe2++Mg) ratio may have equilibrated fairly rapidly with the changing melt composition due to olivine crystallization. Six of the samples were collected on the same day at various locations along a 10-km lava tube and the calculated pre-collection temperatures of the samples show a 5°C drop with distance from the vent. The average Fe2+/(Fe2++Mg) of the spinel in these samples shows a weak positive correlation with decreasing MgO in the glass of these samples. The range in Cr2O3 (0.041–0.045 wt.%) of the glass for these six samples is too small to distinguish a consistent change along the lava tube. The spinel in the Pu’u ’O’o samples shows a zoning trend in a Cr–Al–Fe3+ diagram almost directly away from the Cr apex. This compares with a zoning trend in rapidly quenched MORB samples away from Cr coupled with decreasing Fe3+. The trend away from Cr displayed by spinel in rapidly quenched samples is in marked contrast to the trend of increasing Fe3+ shown by spinel in slowly cooled lava.  相似文献   

19.
The precise knowledge of the initial 26Al/27Al ratio [(26Al/27Al)0] is crucial if we are to use the very first solid objects formed in our Solar System, calcium–aluminum-rich inclusions (CAIs) as the “time zero” age-anchor and guide future work with other short-lived radio-chronometers in the early Solar System, as well as determining the inventory of heat budgets from radioactivities for early planetary differentiation. New high-precision multi-collector inductively-coupled plasma mass spectrometry (MC-ICP-MS) measurements of 27Al/24Mg ratios and Mg-isotopic compositions of nine whole-rock CAIs (six mineralogically characterized fragments and three micro-drilled inclusions) from the CV carbonaceous chondrite, Allende yield a well-defined 26Al–26Mg fossil isochron with an (26Al/27Al)0 of (5.23 ± 0.13) × 10− 5. Internal mineral isochrons obtained for three of these CAIs (A44A, AJEF, and A43) are consistent with the whole-rock CAI isochron. The mineral isochron of AJEF with (26Al/27Al)0 = (4.96 ± 0.25) × 10− 5, anchored to our precisely determined absolute 207Pb–206Pb age of 4567.60 ± 0.36 Ma for the same mineral separates, reinstate the “canonical” (26Al/27Al)0 of 5 × 10− 5 for the early Solar System. The uncertainty in (26Al/27Al)0 corresponds to a maximum time span of ± 20 Ka (thousand years), suggesting that the Allende CAI formation events were culminated within this time span. Although all Allende CAIs studied experienced multistage formation history, including melting and evaporation in the solar nebula and post-crystallization alteration likely on the asteroidal parent body, the 26Al–26Mg and U–Pb-isotopic systematics of the mineral separates and bulk CAIs behaved largely as closed-system since their formation. Our data do not support the “supra-canonical” 26Al/27Al ratio of individual minerals or their mixtures in CV CAIs, suggesting that the supra-canonical 26Al/27Al ratio in the CV CAIs may have resulted from post-crystallization inter-mineral redistribution of Mg isotopes within an individual inclusion. This redistribution must be volumetrically minor in order to satisfy the mass balance of the precisely defined bulk CAI and bulk mineral data obtained by MC-ICP-MS.The radiogenic 208Pb/206Pb ratio obtained as a by-product from the Pb–Pb age dating is used to estimate time-integrated 232Th/238U ratio (κ value) of CAIs. Limited κ variations among the minerals within a single CAI, contrasted by much larger variations among the bulk CAIs, suggest Th/U fractionation occurred prior to crystallization of igneous CAIs. If interpreted as primordial heterogeneity, the κ value can be used to calculate the mean age of the interstellar dust from which the CAIs condensed.  相似文献   

20.
A new electrochemical voltammetric sensor, Langmuir–Blodgett (LB) film of 25,27‐dimethoxy‐26‐(N‐trichloroacetyl)carbamoyloxy‐p‐tert‐butylcalix[4]arene (DCA) modified GCE (LBDCA–GCE), was designed and successfully used for recognition and determination of trace amounts of Ag+ in water. Under the optimum experimental conditions, the lowest detectable concentration of Ag+ reached 1 × 10?9 mol L?1. Moreover, LBDCA–GCE exhibited a well‐defined response relating to the Ag+ with good sensitivity, selectivity, reproducibility, and long stability. The recognizing mechanism of LBDCA–GCE for silver ion in aqueous solution was also discussed. The results show that the size of calixarene cavity may be the predominate factor affecting recognition of calixarene for silver ions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号