首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 74 毫秒
1.
Interferometric identification and health monitoring of high‐rise buildings has been gaining increasing interest in recent years. The wave dispersion in the structure has been largely ignored in these efforts but needs to be considered to further develop these methods. In this paper, (i) the goodness of estimation of vertical wave velocity in buildings, as function of frequency, by two nonparametric interferometric techniques is examined, using realistic fixed‐base Timoshenko beam benchmark models. Such models are convenient because the variation of phase and group velocities with frequency can be derived theoretically. The models are those of the NS and EW responses of Millikan Library. One of the techniques, deconvolution interferometry, estimates the phase velocity on a frequency band from phase difference between motions at two locations in the structure, while the other one estimates it approximately at the resonant frequencies based on standing wave patterns. The paper also (ii) examines the modeling error in wave velocity profiles identified by fitting layered shear beam in broader band impulse response functions of buildings with significant bending flexibility. This error may affect inferences on the spatial distribution of damage from detected changes in such velocity profiles. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

2.
For transient, high frequency, and pulse like excitation of structures in the near field of strong earthquakes, the classical design approach based on relative response spectrum and mode superposition may not be conservative. For such excitations, it is more natural to use wave propagation methods. In this paper (Part I), we review several two-dimensional wave propagation models of buildings and show results for theoretical dispersion curves computed for these models. We also estimate the parameters of these models that would correspond to a seven-story reinforced concrete building in Van Nuys, California. Ambient vibration tests data for this building imply vertical shear wave velocity βz=112 m/s and anisotropy factor βx/βz=0.55 for NS vibrations, and βz=88 m/s and βx/βz=1 for EW vibrations. The velocity of shear waves propagating through the slabs is estimated to be about 2000 m/s. In the companion paper (Part II), we estimate phase velocities of vertically and horizontally propagating waves between seven pairs of recording points in the building using recorded response to four earthquakes.  相似文献   

3.
Nonparametric techniques for estimation of wave dispersion in buildings by seismic interferometry are applied to a simple model of a soil–structure interaction (SSI) system with coupled horizontal and rocking response. The system consists of a viscously damped shear beam, representing a building, on a rigid foundation embedded in a half‐space. The analysis shows that (i) wave propagation through the system is dispersive. The dispersion is characterized by lower phase velocity (softening) in the band containing the fundamental system mode of vibration, and little change in the higher frequency bands, relative to the building shear wave velocity. This mirrors its well‐known effect on the frequencies of vibration, i.e. reduction for the fundamental mode and no significant change for the higher modes of vibration, in agreement with the duality of the wave and vibrational nature of structural response. Nevertheless, the phase velocity identified from broader band impulse response functions is very close to the superstructure shear wave velocity, as found by an earlier study of the same model. The analysis reveals that (ii) the reason for this apparent paradox is that the latter estimates are biased towards the higher values, representative of the higher frequencies in the band, where the response is less affected by SSI. It is also discussed that (iii) bending flexibility and soil flexibility produce similar effects on the phase velocities and frequencies of vibration of a building. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
This article investigates the characteristics of the accidental eccentricity in symmetric buildings due to torsional response arising from wave passage effects in the near‐fault region. The soil–foundation–structure system is modeled as a symmetric cylinder placed on a rigid circular foundation supported on an elastic halfspace and subjected to obliquely incident plane SH waves simulating the action of near‐fault pulse‐like ground motions. The translational response is computed assuming that the superstructure behaves as a shear beam under the action of translational and rocking base excitations, whereas the torsional response is calculated using the mathematical formulation proposed in a previous study. A broad range of properties of the soil–foundation–structure system and ground motion input are considered in the analysis, thus facilitating a detailed parametric investigation of the structural response. It is demonstrated that the normalized accidental eccentricity is most sensitive to the pulse period (TP) of the near‐fault ground motions and to the uncoupled torsional‐to‐translational fundamental frequency ratio (Ω) of the structure. Furthermore, the normalized accidental eccentricities due to simplified pulse‐like and broadband ground motions in the near‐fault region are computed and compared against each other. The results show that the normalized accidental eccentricity due to the broadband ground motion is well approximated by the simplified pulse for longer period buildings, while it is underestimated for shorter period buildings. For symmetric buildings with values of Ω commonly used in design practice, the normalized accidental eccentricity due to wave passage effects is less than the typical code‐prescribed value of 5%, except for buildings with very large foundation radius. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

5.
High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (VS), compressional (P)-wave velocity (VP), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor QP and S-wave quality factor QS in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting QS from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from QP cannot be ignored when Vs/VP reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert QP from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to QP than to QS. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.  相似文献   

6.
To determine the shear wave velocity structure and predominant period features of T?naztepe in ?zmir, Turkey, where new building sites have been planned, active–passive surface wave methods and single-station microtremor measurements are used, as well as surface acquisition techniques, including the multichannel analysis of surface waves (MASW), refraction microtremor (ReMi), and the spatial autocorrelation method (SPAC), to pinpoint shallow and deep shear wave velocity. For engineering bedrock (V s > 760 m/s) conditions at a depth of 30 m, an average seismic shear wave velocity in the upper 30 m of soil (AVs30) is not only accepted as an important parameter for defining ground behavior during earthquakes, but a primary parameter in the geotechnical analysis for areas to be classified by V s30 according to the National Earthquake Hazards Reduction Program (NEHRP). It is also determined that Z1.0, which represents a depth to V s = 1000 m/s, is used for ground motion prediction and changed from 0 to 54 m. The sediment–engineering bedrock structure for T?naztepe that was obtained shows engineering bedrock no deeper than 30 m. When compared, the depth of engineering bedrock and dominant period map and geology are generally compatible.  相似文献   

7.
Two new algorithms have been introduced as a further development of a robust interferometric method for structural health monitoring (SHM) of buildings during earthquakes using data from seismic sensors. The SHM method is intended to be used in an automatic seismic alert system, to issue a warning of significant damage during or immediately after the earthquake, and facilitate decision making on evacuation, to avoid loss of life and injury from possible collapse of the weekend structure during aftershock shaking. The method identifies a wave velocity profile of the building by fitting an equivalent layered shear beam model in impulse response functions (virtual source at roof) of the recorded earthquake response. The structural health is monitored by detecting changes in the identified velocities in moving time windows, the initial window being used as reference. Because the fit involves essentially matching phase difference between motion at different floors, the identified velocity profile is not affected by rigid body rocking, and soil-structure interaction in general, as demonstrated in this paper. Consequently, detected changes in wave velocity during an earthquake are not affected by changes in the soil-foundation system, which is a major advantage over SHM by detecting changes in the observed modal frequencies. Further, the method is robust when applied to real buildings and large amplitude earthquake response, as demonstrated in previous work. The new fitting algorithms introduced are the nonlinear least squares (LSQ) fit and the time shift matching (TSM) algorithms. The former involves waveform inversion of the impulse responses, and the latter - iterative matching of the pulse time shifts, both markedly reducing the identification error as compared to the previously used direct ray algorithm, especially for more detailed models, i.e., with fewer floors per layer. Results are presented of identification of the NS, EW and torsional responses of the densely instrumented Millikan Library (9-story reinforced concrete building in Pasadena, California) during a small earthquake.  相似文献   

8.
四川宜宾地区S波分裂特征   总被引：1，自引：0，他引：1  
本文采用纵横比与偏振分析相结合的方法测定了2013年4月25日~2015年12月31日四川宜宾地区10个台站S波分裂参数,即快波偏振方向和慢波延迟时间。结果表明,华蓥山断裂两侧台站呈现不同的快波偏振优势方向,断裂带以西的台站偏振优势方向为NW向,与区域应力场方向一致;位于断裂带以东的台站优势偏振方向为NE向,与断裂走向一致。在地震密集分布区域内的CNI台的优势偏振方向为NE向,与台站附近的断裂带走向基本一致。研究区域南段的3个台站(JLI、YAJ、XWE)优势偏振方向近NS向。各个台站平均慢波延迟时间在3.07~11.95ms/km范围内,慢波延迟时间最大的台站是CNI台,距离2013年4月25日06时10分M_L5.2地震震中位置最近,这反映出震源区地震波各向异性程度较强。CNI台站的慢波延迟时间显示,在2015年2月7日M_L4.8地震前观测到慢波延迟时间有明显的上升趋势。  相似文献   

9.
In this study, a novel and enhanced soil–structure model is developed adopting the direct analysis method using FLAC 2D software to simulate the complex dynamic soil–structure interaction and treat the behaviour of both soil and structure with equal rigour simultaneously. To have a better judgment on the inelastic structural response, three types of mid-rise moment resisting building frames, including 5, 10, and 15 storey buildings are selected in conjunction with three soil types with the shear wave velocities less than 600 m/s, representing soil classes Ce, De and Ee, according to Australian Standards. The above mentioned frames have been analysed under two different boundary conditions: (i) fixed-base (no soil–structure interaction) and (ii) flexible-base (considering soil–structure interaction). The results of the analyses in terms of structural displacements and drifts for the above mentioned boundary conditions have been compared and discussed. It is concluded that considering dynamic soil–structure interaction effects in seismic design of moment resisting building frames resting on soil classes De and Ee is essential.  相似文献   

10.
A series of undrained cyclic direct simple shear tests, which used a soil container with a membrane reinforced with stack rings to maintain the K0 condition and integrated bender elements for shear wave velocity measurement, were performed to study the liquefaction characteristics of gap-graded gravelly soils with no fines content. The intergrain state concept was employed to categorize gap-graded sand–gravel mixtures as sand-like, gravel-like, and in-transition soils, which show different liquefaction characteristics. The testing results reveal that a linear relationship exists between the shear wave velocity and the minor fraction content for sand–gravel mixtures at a given skeleton void ratio of the major fraction particles. For gap-graded gravelly sand, the gravel content has a small effect on the liquefaction resistance, and the cyclic resistance ratio (CRR) of gap-graded gravelly sands can be evaluated using current techniques for sands with gravel content corrections. In addition, the results indicate that the current shear wave velocity (Vs) based correlation underestimates the liquefaction resistance for Vs values less than 160 m/s, and different correlations should be proposed for sand-like and gravel-like gravelly soils. Preliminary modifications to the correlations used in current evaluations of liquefaction resistance have thus been proposed.  相似文献   

11.
土体剪切波速是进行土层地震反应分析的动力学参数，对场地地震动参数确定具有重要意义。基于地质地貌分析，将大同盆地划分为5类典型地质单元。对盆地1429个钻孔剪切波速资料进行分析，探讨VS30与VS20的相关性，研究土体埋深、岩性、地质单元、标贯击数及密实度等地质特征对VS的影响，并基于地质单元、剪切波速比、密实度系数及第四系上部覆盖层厚度相关性分析给出土体VS30预测模型。研究结果表明，基于典型地质特征的VS30预测模型拟合优度R2>0.90，预测精度很高，对于离散性较大、直接拟合估算较差及无剪切波速场地来说，以区分地质单元及土体类型的方式进行VS30分解预测是良好的研究思路。首次在区分地质单元及土体类型的前提下提出剪切波速比及密实度系数，并将其与第四系上部覆盖层厚度综合应用于VS30预测研究。研究结果可为大同盆地城市防震减灾规划、震害预测、区域性地震安全评价提供重要技术支撑。  相似文献   

12.
Erosion of cohesive soils in fluvial environments is dependent on physical, geochemical and biological properties, which govern inter‐particle attraction forces and control detachment rates from stream beds and banks. Most erosion rate models are based on the excess shear stress equation where the soil erodibility coefficient (kd) is multiplied by the difference between the boundary hydraulic shear stress (τb) and the soil critical shear stress (τc). Both kd and τc are a function of soil properties and must be obtained through in situ field or laboratory testing. Many studies have generated predictive relationships for kd and τc derived from various soil properties. These studies typically were conducted in watersheds within a single physiographic region with a common surficial geology and/or investigated a limited number of soil properties, particularly geochemical properties. With widely reported differences in relationships between τc and soil properties, this study investigated differences in predictive relationships for τc among different physiographic provinces in Tennessee, USA. Erodibility parameters were determined in the field using a mini‐jet test device. Among these provinces, statistically four unique clusters were identified from a dataset of 128 observations and these data clusters were used to develop predictive models for τc to identify dominant properties governing erosion. In these clusters, 16 significant physical and geochemical soil properties were identified for τc prediction. Among these soil properties, water content and passing #200 sieve (percentage soil less than 75 μm) were the dominant controlling parameters to predict τc in addition to clay percentage (< 2 μm), bulk density, and soil pore water chemistry. This study suggests that unique relationships exist for physiographic provinces that are likely due to soil physical‐geochemical processes associated with surficial geology that determine minerology of the cohesive soil. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

13.
This paper is a systematic effort to clarify why field liquefaction charts based on Seed and Idriss׳ Simplified Procedure work so well. This is a necessary step toward integrating the states of the art (SOA) and practice (SOP) for evaluating liquefaction and its effects. The SOA relies mostly on laboratory measurements and correlations with void ratio and relative density of the sand. The SOP is based on field measurements of penetration resistance and shear wave velocity coupled with empirical or semi-empirical correlations. This gap slows down further progress in both SOP and SOA. The paper accomplishes its objective through: a literature review of relevant aspects of the SOA including factors influencing threshold shear strain and pore pressure buildup during cyclic strain-controlled tests; a discussion of factors influencing field penetration resistance and shear wave velocity; and a discussion of the meaning of the curves in the liquefaction charts separating liquefaction from no liquefaction, helped by recent full-scale and centrifuge results. It is concluded that the charts are curves of constant cyclic strain at the lower end (Vs1<160 m/s), with this strain being about 0.03–0.05% for earthquake magnitude, Mw≈7. It is also concluded, in a more speculative way, that the curves at the upper end probably correspond to a variable increasing cyclic strain and Ko, with this upper end controlled by overconsolidated and preshaken sands, and with cyclic strains needed to cause liquefaction being as high as 0.1–0.3%. These conclusions are validated by application to case histories corresponding to Mw≈7, mostly in the San Francisco Bay Area of California during the 1989 Loma Prieta earthquake.  相似文献   

14.
为优化处于长周期地震动输入下的大型建筑剪力墙结构,进行了振动台试验。分析普通地震动与长周期地震动波的区别,证明了长周期地震波具有显著长周期分量的特性。将某一高层酒店剪力墙作为研究案例,设计模拟实验台的构建流程与传感器布局,将建筑模型缩尺比例设置为1∶10。选择CA波、RG波、EL波作为实验用地震波,从位移与结构周期、层间剪力与位移比、易损性以及损失评估等方面对大型建筑剪力墙的抗震性能进行了评估。振动台试验结果表明,在位移相同的情况下,长周期地震波下的建筑极限承载力最小;在经历CA波、RG波、EL波后,模型的自振周期均发生变化,而EL波作用下模型的自振周期始终比基本周期略长;不同地震波下,X、Y向层间剪力变化基本趋于一致;CA波、EL波作用下,X向位移比较为接近,而剪力墙Y向上位移比在三种地震波作用下具有较大差异性;在长周期地震波作用下,大型建筑剪力墙损伤最为严重。  相似文献   

15.
This article explores the possibility to measure deformations of building foundations from measurements of ambient noise and strong motion recordings. The case under study is a seven-storey hotel building in Van Nuys, California. It has been instrumented by strong motion accelerographs, and has recorded several earthquakes, including the 1971 San Fernando (ML=6.6, R=22 km), 1987 Whittier–Narrows (ML=5.9, R=41 km), 1992 Landers (ML=7.5, R=186 km), 1992 Big Bear (ML=6.5, R=149 km), and 1994 Northridge (ML=6.4, R=1.5 km) earthquake and its aftershocks (20 March: ML=5.2, R=1.2 km; 6 December, 1994: ML=4.3, R=11 km). It suffered minor structural damage in 1971 earthquake and extensive damage in 1994. Two detailed ambient vibration tests were performed following the Northridge earthquake, one before and the other one after the 20 March aftershock. These included measurements at a grid of points on the ground floor and in the parking lot surrounding the building, presented and analyzed in this article. The analysis shows that the foundation system, consisting of grade beams on friction piles, does not act as a “rigid body” but deforms during the passage of microtremor and therefore earthquake waves. For this geometrically and by design essentially symmetric building, the center of stiffness of the foundation system appears to have large eccentricity (this is seen both from the microtremor measurements and from the earthquake recordings). This eccentricity may have contributed to strong coupling of transverse and torsional responses, and to larger than expected torsional response, contributing to damage during the 1994 Northridge, earthquake.  相似文献   

16.
Based on the liquefaction performance of sites with seismic activity, the normalized shear wave velocity, Vs1, has been proposed as a field parameter for liquefaction prediction. Because shear wave velocity, Vs, can be measured in the field with less effort and difficulty than other field tests, its use by practitioners is highly attractive. However, considering that its measurement is associated with small strain levels, of the order of 10−4–10−3%, Vs reflects the elastic stiffness of a granular material, hence, it is mainly affected by soil type, confining pressure and soil density, but it is insensitive to factors such as overconsolidation and pre-shaking, which have a strong influence on the liquefaction resistance. Therefore, without taking account of the important factors mentioned above, the correlation between shear wave velocity and liquefaction resistance is weak.In this paper, laboratory test results are presented in order to demonstrate the significant way in which OCR (overconsolidation ratio) affects both shear wave velocity and liquefaction resistance. While Vs is insensitive to OCR, the liquefaction resistance increases significantly with OCR. In addition, the experimental results also confirm that Vs correlates linearly with void ratio, regardless of the maximum and minimum void ratios, which means that Vs is unable to give information about the relative density. Therefore, if shear wave velocity is used to predict liquefaction potential, it is recommended that the limitations presented in this paper be taken into account.  相似文献   

17.
The transient dynamic response of single piles in a layered half-space under a time-dependent vertical force is analyzed by an FEM-BEM coupling approach. The pile is modeled by FEM and the layered half-space is modeled by a general cylindrical coordinates time-domain BEM. Only one-dimensional discretization is necessary on the boundaries of the three-dimensional layered half-space by virtue of the Fourier theory, while the pile shaft can be discretized as a one-dimensional elastic beam. The compatibility and equilibrium conditions between pile shaft and soil layers are employed to assemble respective equations into one. Fairly good agreement between two unknown solutions and the current approach is found. Parametric studies reveal the influences of several dimensionless factors, such as Ep/Es, l/r0, p/s and νs. The effect of soil layering and the support condition of the pile tip is also reported by numerical examples.  相似文献   

18.
剪切波速与地基土的抗剪强度、剪切模量和卓越周期等参数密切相关,是地震安全性评价中判定场地类别的一个主要指标和参数。鉴于海域工程中剪切波速往往难以直接由原位测得,而室内实验结果又常常与野外现场物探测试值存在较大差异,因此,如何通过其他途径有效获取满足工程需要的剪切波速参数在海域工程的地震安全性评价等方面具有迫切的实用需求。为此本文通过对渤海海域数十个石油平台项目中一系列饱和黏性土样品的剪切波速与抗剪强度实验数据的统计分析,尝试采用多种可能的函数来拟合确定二者之间的经验关系。结果表明:对于渤海海域黏性土剪切波速V_s与抗剪强度S_u之间的最佳统计经验关系为幂函数V_s=53.751S_u~(0.376)。此关系可为渤海海域工程中通过不排水抗剪强度估算剪切波速提供一种简便可行的实用性方法。  相似文献   

19.
Deep unconsolidated sediments in the Mississippi embayment will influence ground motions from earthquakes in the New Madrid seismic zone. Shear wave velocity profiles of these sediments are important input parameters for modeling wave propagation and site response in this region. Low-frequency, active-source surface wave velocity measurements were performed to develop small-strain shear wave velocity (VS) profiles at eleven deep soil sites in the Mississippi embayment, from north of New Madrid, Missouri to Memphis, Tennessee. A servo-hydraulic, low-frequency source was used to excite surface wave energy to wavelengths of 600 m, resulting in VS profiles to depths of over 200 m. The average VS profile calculated from the eleven sites is in good agreement with common reference VS profiles that have been used in seismic hazard studies of this region. The variability in VS profiles is shown to be associated with changes in formation depth and thickness from site-to-site. Using lithologic information at each site, average formation velocities were developed and compared to previous studies. We found average VS values of about 193 m/s for alluvial deposits, 400 m/s for the Upper Claiborne formations, and 685 m/s for the Memphis Sand formation.  相似文献   

20.
景亮  吴琪  方怡 《震灾防御技术》2020,15(4):696-707
为探讨测试方法、试验条件以及级配特征对砂-粉混合料剪切波速的影响，对具有不同细粒含量FC，相对密度Dr以及初始有效围压$\sigma_{3 \mathrm{c}}^{\prime}$的砂-粉混合料进行弯曲元和共振柱试验。结果表明:当Dr =35%或50%时，剪切波速Vs随FC的增大先减小后增大；当Dr =60%时，Vs随FC的增大而减小；弯曲元试验测得的Vs明显大于共振柱试验测得的Vs，随着FC的增大，弯曲元试验与共振试验得到的Vs差值逐渐减小，而当FC＞20%时，两种试验得到的Vs基本相同。在考虑Vs弥散性之后，不同FC的混合料弯曲元与共振柱试验得到的Vs结果具有较好的一致性。基于Hardin模型建立的砂-粉混合料Vs预测方法具有较好的预测效果。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号