共查询到20条相似文献,搜索用时 453 毫秒
1.
从集集地震看建筑物震害与地震动参数的关系 总被引:5,自引:1,他引:4
本文根据9.21台湾集集大地震中南投县、台中县、台北县和苗栗县的建筑物震害调查资料确定出这4个主要受害地区的平均震害指数,然后义计算出这4个地区的地震动峰值加速度、峰值速度、峰值谱加速度、峰值谱速度、峰值谱位移的平均值。将这些均值分别与平均震害指数进行基于最小二乘法的线性回归,发现峰值速度和震害指数有非常好的相关性,相关系数接近1.0,而峰值加速度与震害指数相关性只有0.8,这说明地震动峰值速度能够体现地震动对脆性结构的破坏势,与以往将不同次地震的记录和资料混淆在一起研究而获得峰值加速度与震害有很好相关性形成了对比。 相似文献
2.
3.
云南地区基岩水平峰值加速度衰减规律 总被引:7,自引:0,他引:7
本文根据云南地区的实测强震加速度资料,采用二元一次回归统计法研究了云南地区的基岩水平峰值加速度衰减规律。文中选取云南地区的加速度记录131条,引用美国西部地区的加速度记录114条,分别对资料进行加速度衰减规律统计,然后把所得的结果与云南地区由烈度地震动参数换算而得的结果进行比较分析,最后提出较为适合云南地区特性的基岩水平峰值加速度衰减规律: A_P=1291.07(?)~(0.5275M)(R 15)~(1.5785) 相似文献
4.
5.
本文以国内川滇甘陕地区263个有详细场地资料的强震台站获得的802组地震动加速度记录为基础,研究了该地区加速度峰值比的总体分布特征,分别探讨了震中距和震级对加速度峰值比的影响特征,按照水平反应谱的标定方法对竖向反应谱进行标定并对其进行了统计分析。统计分析结果显示:竖向与水平向加速度峰值比的概率分布总体服从极值Ⅱ型分布,加速度峰值比均值为0.6,加速度峰值比≤0.65的累积频率为64%;Ⅱ类场地的加速度峰值比随震中距增大而减小;大震近场的加速度峰值比基本上远高于0.65;最后本文给出了不同场地类别下竖向反应谱特征参数,并与水平向反应谱特征参数进行了比较。 相似文献
6.
中国西部地区利用烈度数据估计地震动参数的方法 总被引:1,自引:0,他引:1
通过最近收集到的中国西部地区的6次地震的地震动参数和烈度数据,建立了该地区适用于贝叶斯方法的各烈度档P(I|GM)的经验分布。利用2011年发生的四川炉霍地震和新疆伽师地震资料验证了依据烈度数据用贝叶斯方法估算峰值加速度的可行性。研究结果还表明,用贝叶斯方法估计的参数精度与选择的先验概率(衰减关系)显著相关。针对这2次地震,用各烈度档地震动参数的均值法、地震动衰减关系法及贝叶斯法3种方法估算的峰值加速度值与峰值加速度观测值之间的均方根比较表明,用贝叶斯方法估算的参数精度优于用另2种方法所获结果。 相似文献
7.
2020年5月18日云南省巧家县发生M_S5.0地震,中国数字强震动台网的13个强震台站和昭通简易烈度计示范项目建设的43个烈度计台站,共接收168条强震动记录,经常规处理,绘制震区加速度峰值等值线图,并与云南地区常用地震动衰减关系进行对比,分析加速度峰值较大的几个台站频谱特性,计算地震动能量持时,讨论中小地震中高加速度峰值/低震害现象的成因,得到以下结论:(1) PGA等值线图形状较为平滑,其长轴呈NW—SE向展布;(2)云南地区常用地震动衰减关系预测值总体衰减趋势与观测值一致,但在近场(0—30 km)时,预测值基本偏小;(3)加速度峰值较大的几个台站记录主频集中在1—5 Hz;(4)小河镇台记录的能量持时较短,说明能量衰减较快,属脉冲型记录,不会对建筑物造成较大破坏。 相似文献
8.
汶川地震黄土地区强地震动加速度峰值(PGA)较小,然而震害却较为严重,局部场地震害和地震动放大效应显著。选取四川、甘肃及宁夏境内的部分强震动记录,探讨传播距离和场地条件对地震动的影响规律,重点研究黄土地区地震动幅值、频谱、持时特征以及对建筑结构的潜在影响,从地震动特征角度分析该地区震害相对较重的原因。结果表明:汶川地震黄土地区地震动速度峰值较大,地震动中频分量和中长周期成分较为突出;黄土地区自振周期为0.3~1s以及3~4s(尤其是此周期内30~40层)的结构物地震反应将显著放大;设计地震分组为第三组的Ⅲ类黄土场地,加速度反应谱拟合曲线在周期1~3.5s谱值明显高于规范设计谱;黄土场地地表地震动拥有更长持时。 相似文献
9.
在研究西安地区大量钻孔资料的基础上,构造了44个不同等效剪切波速和覆盖层厚度场地条件下的典型场地剖面,利用一维等效线性化地震反应分析方法,计算了不同场地在3种不同强度的地震动输入下的地面峰值加速度,分析了地震动峰值加速度放大系数ks随场地类别、等效剪切波速Vse、覆盖层厚度H和输入地震动强度ar的变化特征,指出了按场地类别对地震动峰值加速度调整存在的问题。分析结果表明,加速度放大系数随等效剪切波速、覆盖层厚度及基岩输入地震动强度的增大而减小;等效剪切波速对加速度放大系数的影响大于覆盖层厚度的影响,随着输入地震动强度的增大,覆盖层厚度对加速度放大系数的影响成份有逐渐加大的趋势;覆盖层厚度对加速度放大系数的影响程度随着等效剪切波速的增大而逐渐减弱;加速度放大系数与场地等效剪切波速和覆盖层厚度之间具有较高的拟合度的统计回归关系。由此提出了直接用场地等效剪切波速和覆盖层厚度对地震动峰值加速度进行调整的新途径。最后,就地震动峰值加速度随场地条件的调整方法,提出了有待进一步研究的问题。 相似文献
10.
11.
12.
13.
14.
山东省场地类别分布及地震动峰值加速度区划调整 总被引:1,自引:1,他引:0
首先,本文搜集了山东省5220个建设工程场地的资料,引入"分布区"的概念,统计分析了山东省场地类别的区域分布并进行了分区。然后,根据《中国地震动参数区划图(GB18306-2015)》中的山东省地震动峰值加速度区划以及Ⅲ类场地调整系数,对山东省Ⅲ类场地分布区的地震动峰值加速度区划进行了调整,得到了考虑场地类别分区的山东省地震动峰值加速度区划图,增进了对山东省地震灾害风险空间分布的认识。结果表明,山东省场地类别分布与地貌分区有很强的相关性,Ⅰ-Ⅱ类场地分布区包括鲁中南山地丘陵区(西南部的山间平原地带除外)以及鲁东丘陵区,Ⅲ类场地分布区包括鲁西北-鲁西南平原区和鲁中南山地丘陵区西南部山间平原地带。Ⅰ-Ⅱ类场地分布区约占全省陆地面积的59.5%,Ⅰ-Ⅱ类场地分布区与Ⅲ类场地分布区的面积比例约为1.47。地震动峰值加速度区划图经过调整后,Ⅶ度及以上设防区域占全省陆地面积的比例由79%提高到90%,10个地级市的峰值加速度有提高。 相似文献
15.
当前,合理确定地震动峰值加速度与反应谱特征周期是工程场地地震动参数确定工作的主要内容。本文以北京地区典型中硬场地为研究对象,分析场地条件对不同周期地震动反应谱值的影响。首先,计算不同震级、震中距条件下的基岩地震动加速度反应谱,合成基岩输入地震动时程;再利用110个工程场地的钻孔资料进行土层地震反应计算,分析中硬场地条件对不同输入环境下的地震动加速度反应谱值的放大效应。结果表明,中硬场地对高、中频震动放大效应明显,尤其是对0.2-0.5s周期段地震动加速度反应谱值的放大倍数大多在1.3以上;场地覆盖层厚度变化对不同频段地震动加速度反应谱值的放大倍数所产生的影响是不同的,与场地自振周期的相关性很强;在不同的地震动输入环境下,中硬场地对不同频段地震动加速度反应谱的影响是不同的,这一结论对实际的抗震设防工作具有一定参考价值。 相似文献
16.
为分析地下水的存在对地震动参数的影响,以3个实际场地作为计算土层,2条真实的地震波记录作为输入地震动,分别计算不含地下水工况和饱含地下水工况的土层地震反应。其中,不含地下水工况使用单相介质模型,饱含地下水工况使用双相介质模型,算法均使用有限差分方法,人工边界使用透射边界。根据得到的加速度时程,提取它们的峰值加速度和反应谱数据,经过对比分析,得出以下结论:(1)含地下水场地的地表峰值加速度要明显小于不含地下水场地的地表峰值加速度;(2)含地下水场地的地表加速度反应谱要大于不含地下水场地的反应谱值;(3)由于地下水的存在,场地放大系数反应谱特征周期向长周期改变,反应谱平台值变大。 相似文献
17.
山东地区地震危险性空间分布特征研究 总被引:3,自引:2,他引:1
概述山东省及其周边的地震环境,并以地震危险性概率分析方法研究山东地区峰值地震加速度空间分布特征。分析不同超越概率水准的峰值地震加速度的比值。结果表明,不同超越概率水准的地震危险性分析结果的比例关系对地震环境具有明显的依赖特征,且总体上服从对数正态概率分布。 相似文献
18.
19.
20.
ZHOU Zheng-hua LI Yu-ping ZHOU You LI Xiao-jun CHEN Liu SU Jie DONG Qing WANG Ya-fei 《地震地质》2019,41(5):1254-1265
Studies on the effect of near-surface overburden soil layers on seismic motion have shown that the overburden soil layers have a significant impact on the seismic effect of the site due to the formation age, genetic type, thickness difference, structure, and dynamic characteristics of the soil layers. In this paper, the one-dimensional seismic response analysis of a nuclear power plant site containing a thick hard interlayer was conducted to discuss the influence of the hard interlayer thickness on the site seismic response, so as to provide a basis for determining the seismic motion parameters for seismic design of similar sites. Based on the engineering geological data of a nuclear power plant site, five models of one-dimensional soil-layer seismic response analysis were built, and the equivalent linear method of the one-dimensional site seismic response was applied to analyze the effect of the interlayer thickness on the peak acceleration and the acceleration response spectra of the site seismic response. The seismic response characteristics of the site and influence rules of the hard interlayer thickness are summarized as follows:1)Under different input seismic motion levels, the peak acceleration at the top of the hard interlayer was less than the input peak acceleration, and the peak acceleration at the ground surface of site was greater than the input peak acceleration. 2)Under the same input seismic motion, the ratios of the peak accelerations at the top of hard interlayer to the input peak accelerations were smaller than the ratios of the peak accelerations at the ground surface to the input peak acceleration, and these ratios first decreased and then increased gradually with the increase of the hard interlayer thickness; while for the same hard interlayer thickness, these ratios gradually decreased as the input peak acceleration increasing. 3)For the same input seismic motion, the ratios of the peak accelerations at the ground surface of site to those at the top of the hard interlayer increased gradually as the hard interlayer thickness increased; however, corresponding to different hard interlayer thicknesses, the variation characteristics of ratios which are the peak accelerations at the ground surface of site to those at the top of the hard interlayer were inconsistent with the increase of the input peak acceleration. 4)The hard interlayer had a significant influence on the short-period acceleration response spectrum and the thicker the hard interlayer was, the wider the influence frequency band would be; while for a special hard interlayer thickness, the influence frequency band is certain, and the hard interlayer had little effect on the acceleration response spectrum coordinates outside this frequency band, the longer the period is, the less the influence of the hard interlayer on the acceleration response spectrum coordinates. The seismic response characteristics of the site and influence rules of the hard interlayer thickness indicate that the hard interlayer thickness has a significant impact on the peak acceleration and the acceleration response spectra of the site seismic response, and the hard interlayer has obvious isolation effect at the seismic motion, and the increase of its thickness reduces the nonlinear effect of the site and leads to the wider influence frequency band. Meanwhile, the higher the input peak acceleration is, the stronger the nonlinear effect of the site, and it's remarkable that the soft layer overlying the hard interlayer has a significant amplification effect on the seismic motion. 相似文献