首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
We obtain the wave velocities and quality factors of gas‐hydrate‐bearing sediments as a function of pore pressure, temperature, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the existence of two solids (grains and gas hydrate) and a fluid mixture. Attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/water mixing law that satisfies Wood's and Voigt's averages at low and high frequencies, respectively. The acoustic model is calibrated to agree with the patchy‐saturation theory at high frequencies (White's model). Pressure effects are accounted by using an effective stress law for the dry‐rock moduli and permeabilities. The dry‐rock moduli of the sediment are calibrated with data from the Cascadia margin. Moreover, we calculate the depth of the bottom simulating reflector (BSR) below the sea floor as a function of sea‐floor depth, geothermal gradient below the sea floor, and temperature at the sea floor.  相似文献   

2.
Wave‐induced oscillatory fluid flow in the vicinity of inclusions embedded in porous rocks is one of the main causes for P‐wave dispersion and attenuation at seismic frequencies. Hence, the P‐wave velocity depends on wave frequency, porosity, saturation, and other rock parameters. Several analytical models quantify this wave‐induced flow attenuation and result in characteristic velocity–saturation relations. Here, we compare some of these models by analyzing their low‐ and high‐frequency asymptotic behaviours and by applying them to measured velocity–saturation relations. Specifically, the Biot–Rayleigh model considering spherical inclusions embedded in an isotropic rock matrix is compared with White's and Johnson's models of patchy saturation. The modeling of laboratory data for tight sandstone and limestone indicates that, by selecting appropriate inclusion size, the Biot‐Rayleigh predictions are close to the measured values, particularly for intermediate and high water saturations.  相似文献   

3.
地震波本征衰减反映了地层及其所含流体的一些特性,对油气勘探开发有重要意义.已有的理论研究与实验发现,地震频带内的衰减主要与中观尺度(波长与颗粒尺度之间)的斑状部分饱和、完全饱和岩石弹性非均匀性情况下波诱导的局部流体流有关.这种衰减与岩石骨架、孔隙度及充填流体的性质密切相关.本文着重讨论均匀流体分布、斑状或非均匀流体分布两种情况下部分饱和岩石的纵波模量差异.以经典岩石物理理论和衰减机制认识为基础,通过分析低频松弛状态、高频非松弛状态岩石的弹性模量,讨论储层参数(如孔隙度、泥质含量以及含水饱和度等)与纵波衰减之间的确定性关系.上述方法与模型在陆相砂泥岩地层与海相碳酸盐岩地层中的适用性通过常规测井资料得到了初步验证.  相似文献   

4.
Saturation of porous rocks with a mixture of two fluids (known as partial saturation) has a substantial effect on the seismic waves propagating through these rocks. In particular, partial saturation causes significant attenuation and dispersion of the propagating waves, due to wave-induced fluid flow. Such flow arises when a passing wave induces different fluid pressures in regions of rock saturated by different fluids. As partial fluid saturation can occur on different length scales, attenuation due to wave-induced fluid flow is ubiquitous. In particular, mesoscopic fluid flow due to heterogeneities occurring on a scale greater than porescale, but less than wavelength scale, is responsible for significant attenuation in the frequency range from 10 to 1000 Hz.Most models of attenuation and dispersion due to mesoscopic heterogeneities imply that fluid heterogeneities are distributed in a periodic/regular way. In 1D this corresponds to periodically alternating layering, in 3D as periodically distributed inclusions of a given shape (usually spheres). All these models yield very similar estimates of attenuation and dispersion.Experimental studies show that mesoscopic heterogeneities have less idealized distributions and that the distribution itself affects attenuation and dispersion. Therefore, theoretical models are required which would simulate the effect of more general and realistic fluid distributions.We have developed two theoretical models which simulate the effect of random distributions of mesoscopic fluid heterogeneities. The first model assumes that one fluid forms a random ensemble of spherical inclusions in a porous medium saturated by the other fluid. The attenuation and dispersion predicted by this model are very similar to those predicted for 3D periodic distribution. Attenuation (inverse quality factor) is proportional to ω at low frequencies for both distributions. This is in contrast to the 1D case, where random and periodically alternating layering shows different attenuation behaviour at low frequencies. The second model, which assumes a 3D continuous distribution of fluid heterogeneities, also predicts the same low-frequency asymptote of attenuation. However, the shapes of the frequency dependencies of attenuation are different. As the 3D continuous random approach assumes that there will be a distribution of different patch sizes, it is expected to be better suited to modelling experimental results. Further research is required in order to uncover how to relate the random functions to experimentally significant parameters.  相似文献   

5.
深入了解不同压力、频率、流体含量和流体分布对岩石中弹性波传播特性的影响,对指导油气勘探开发具有重要意义.不同尺度下的波致流效应,是声波传播过程中产生速度频散和衰减的重要原因.本文以不同压力下水饱和区域改进的骨架模量为纽带,建立了联合介观尺度斑块饱和效应与微观尺度喷射流效应的部分饱和岩石声学理论模型.开展针对性声学实验,根据不同压力下部分饱和砂岩纵波速度测量数据,确定理论模型中的相关参数,从而实现对不同压力下部分饱和岩石纵波衰减的定量表征.在此基础上,通过理论与实验测量的纵波衰减的对比,分析不同压力、含水饱和度以及频率对岩石纵波衰减的影响.研究结果表明,在较低压力,较高含水饱和度以及较高频段,喷射流效应较强,因此新建模型计算的衰减明显大于斑块饱和模型的衰减.由于新建模型体现了斑块饱和效应与喷射流效应的综合影响,相比于斑块饱和模型,新建模型计算的部分饱和岩石的纵波衰减更接近于实测衰减,但受到岩石自身因素影响,新建模型计算的衰减仍略小于实测衰减.  相似文献   

6.
We measured the extensional‐mode attenuation and Young's modulus in a porous sample made of sintered borosilicate glass at microseismic to seismic frequencies (0.05–50 Hz) using the forced oscillation method. Partial saturation was achieved by water imbibition, varying the water saturation from an initial dry state up to ～99%, and by gas exsolution from an initially fully water‐saturated state down to ～99%. During forced oscillations of the sample effective stresses up to 10 MPa were applied. We observe frequency‐dependent attenuation, with a peak at 1–5 Hz, for ～99% water saturation achieved both by imbibition and by gas exsolution. The magnitude of this attenuation peak is consistently reduced with increasing fluid pressure and is largely insensitive to changes in effective stress. Similar observations have recently been attributed to wave‐induced gas exsolution–dissolution. At full water saturation, the left‐hand side of an attenuation curve, with a peak beyond the highest measured frequency, is observed at 3 MPa effective stress, while at 10 MPa effective stress the measured attenuation is negligible. This observation is consistent with wave‐induced fluid flow associated with mesoscopic compressibility contrasts in the sample's frame. These variations in compressibility could be due to fractures and/or compaction bands that formed between separate sets of forced‐oscillation experiments in response to the applied stresses. The agreement of the measured frequency‐dependent attenuation and Young's modulus with the Kramers–Kronig relations and additional data analyses indicate the good quality of the measurements. Our observations point to the complex interplay between structural and fluid heterogeneities on the measured seismic attenuation and they illustrate how these heterogeneities can facilitate the dominance of one attenuation mechanism over another.  相似文献   

7.
Partially saturated reservoirs are one of the major sources of seismic wave attenuation, modulus defect and velocity dispersion in real seismic data. The main attenuation and dispersion phenomenon is wave induced fluid flow due to the heterogeneity in pore fluids or porous rock. The identification of pore fluid type, saturation and distribution pattern within the pore space is of great significance as several seismic and petrophysical properties of porous rocks are largely affected by fluid type, saturation and fluid distribution pattern. Based on Gassmann-Wood and Gassmann- Hill rock physics models modulus defect, velocity dispersion and attenuation in Jurassic siliclastic partially-saturated rocks are studied. For this purpose two saturation patterns - uniform and patchy - are considered within the pore spaces in two frequency regimes i.e., lower frequency and higher frequency. The results reveal that at low enough frequency where saturation of liquid and gas is uniform, the seismic velocity and bulk modulus are lower than at higher frequency where saturation of fluid mixture is in the form of patches. The velocity dispersion and attenuation is also modeled at different levels of gas saturation. It is found that the maximum attenuation and velocity dispersion is at low gas saturation. Therefore, the dispersion and attenuation can provide a potential way to predict gas saturation and can be used as a property to differentiate low from high gas saturation.  相似文献   

8.
含流体孔隙介质中面波的传播特性及应用   总被引：2，自引：2，他引：0       下载免费PDF全文
基于单相介质中地震波理论的高频面波法已广泛应用于求取浅地表S波的速度.然而水文地质条件表明,普遍的浅地表地球介质富含孔隙.孔隙中充填的流体会显著地影响面波在浅地表的传播,进而造成频散和衰减的变化.本文研究了地震勘探频段内针对含流体孔隙介质边界条件的面波的传播特性.孔隙流体在自由表面存在完全疏通、完全闭合以及部分疏通的情况.孔隙单一流体饱和时,任何流体边界条件下存在R1模式波,与弹性介质中的Rayleigh波类似,相速度稍小于S波并在地震记录中显示强振幅.由于介质的内在衰减,R1在均匀半空间中也存在频散,相速度和衰减在不同流体边界下存在差异.Biot固流耦合系数(孔隙流体黏滞度与骨架渗透率之比)控制频散的特征频率,高耦合系数会在地震勘探频带内明显消除这种差异.介质的迂曲度等其他物性参数对不同流体边界下的R1波的影响也有不同的敏感度.完全闭合和部分疏通流体边界下存在R2模式波,相速度略低于慢P波.在多数条件下,如慢P波在时频响应中难以观察到.但是在耦合系数较低时会显现,一定条件下甚至会以非物理波形式接收R1波的辐射,显示强振幅.浅表风化层低速带存在,震源激发时的运动会显著影响面波的传播.对于接收点径向运动会造成面波的Doppler频移,横向运动会造成面波的时频畸变.孔隙存在多相流体时,中观尺度下不均匀斑块饱和能很好地解释体波在地震频带内的衰减.快P波受到斑块饱和显著影响,R1波与快P波有更明显关联,与完全饱和模型中不同,也更易于等效模型建立.频散特征频率受孔隙空间不同流体成分比例变化的控制,为面波方法探测浅地表流体分布与迁移提供可能性.通常情况孔隙介质频散特征频率较高,标准线性黏弹性固体可以在相对低频的地震勘探频带内等效表征孔隙介质中R1波的传播特征,特别在时域,可在面波成像反演建模中应用.  相似文献   

9.
Intrinsic wave attenuation at seismic frequencies is strongly dependent on rock permeability, fluid properties, and saturation. However, in order to use attenuation as an attribute to extract information on rock/fluid properties from seismic data, experimental studies on attenuation are necessary for a better understanding of physical mechanisms that are dominant at those frequencies. An appropriate laboratory methodology to measure attenuation at seismic frequencies is the forced oscillation method, but technical challenges kept this technique from being widely used. There is a need for the standardization of devices employing this method, and a comparison of existing setups is a step towards it. Here we summarize the apparatuses based on the forced oscillation method that were built in the last 30 years and were used to measure frequency‐dependent attenuation in fluid‐saturated and/or dry reservoir rocks under small strains (10?8–10?5). We list and discuss important technical aspects to be taken into account when working with these devices or in the course of designing a new one. We also present a summary of the attenuation measurements in reservoir rock samples performed with these apparatuses so far.  相似文献   

10.
本文综合考虑了在波传播过程中孔隙介质的三种重要力学机制——"Biot流动机制一squirt流动机制-固体骨架黏弹性机制",借鉴等效介质思想,将含水饱和度引入波动力学控制方程,并考虑了不同波频率下孔隙流体分布模式对其等效体积模量的影响,给出了能处理含粘滞性非饱和流体孔隙介质中波传播问题的黏弹性Biot/squirt(BISQ)模型。推导了时间-空间域的波动力学方程组,由一组平面谐波解假设,给出频率-波数域黏弹性BISQ模型的相速度和衰减系数表达式。基于数值算例分析了含水饱和度、渗透率与频率对纵波速度和衰减的影响,并结合致密砂岩和碳酸盐岩的实测数据,对非饱和情况下的储层纵波速度进行了外推,碳酸盐岩储层中纵波速度对含气饱和度的敏感性明显低于砂岩储层。  相似文献   

11.
Compressional and shear-wave velocities have been measured and a novel approach using digital processing employed to study wave attenuation for brine- and gas- saturated sandstones, over a range of effective stresses from 5 to 60 MPa. Also measured were the complex conductivity in the brine-saturated state and permeability in the gas-saturated state over the same range of stresses as for the velocity measurements. Broadband ultrasonic pulses of P- and orthogonally polarized S-waves in the frequency range 0.3–0.8 MHz are transmitted through the specimen to be characterized for comparison with a reference (aluminium) having low attenuation. The attenuation is calculated in terms of the quality factor Q from the Fourier spectral ratios, using the frequency spectral ratios technique. The corrections necessary for the effects of diffraction due to the finite size of the ultrasonic transducers have been carried out for the case of measurements under lower confining stress. To interpret the laboratory measured velocity and attenuation data under the physical conditions of this study and to estimate the effects of pore structure, numerical modelling of velocities and attenuation as functions of the confining stress have been performed, based on the MIT model. Theoretical models based on several hypothesized attenuation mechanisms are considered in relation to laboratory data of the effects of confining pressure, fluid saturation and pore structure on attenuation. Numerical calculations using these models with the experimental data indicate that friction on thin cracks and grain boundaries is the dominant attenuation mechanism for dry and brine-saturated sandstones at low effective stresses for the frequencies tested. However, for brine-saturated sandstones at moderately high effective stresses, fluid flow could play a more important role in ultrasonic S-wave attenuation, depending on the pore structure of the sample.  相似文献   

12.
A key task of exploration geophysics is to find relationships between seismic attributes (velocities and attenuation) and fluid properties (saturation and pore pressure). Experimental data suggest that at least three different factors affect these relationships, which are not well explained by classical Gassmann, Biot, squirt-flow, mesoscopic-flow and gas dissolution/exsolution models. Some of these additional factors include (i) effect of wettability and surface tension between immiscible fluids, (ii) saturation history effects (drainage versus imbibition) and (iii) effects of wave amplitude and effective stress. We apply a new rock physics model to explain the role of all these additional factors on seismic properties of a partially saturated rock. The model is based on a well-known effect in surface chemistry: hysteresis of liquid bridges. This effect is taking place in cracks, which are partially saturated with two immiscible fluids. Using our model, we investigated (i) physical factors affecting empirical Brie correlation for effective bulk modulus of fluid, (ii) the role of liquids on seismic attenuation in the low frequency (static) limit, (iii) water-weakening effects and (iv) saturation history effects. Our model is applicable in the low frequency limit (seismic frequencies) when capillary forces dominate over viscous forces during wave-induced two-phase fluid flow. The model is relevant for the seismic characterization of immiscible fluids with high contrast in compressibilities, that is, for shallow gas exploration and CO2 monitoring.  相似文献   

13.
墨西哥湾GC955H井钻遇两种不同的水合物储层,浅层裂隙充填型水合物和深层砂岩型水合物.浅层水合物充填在细粒泥质沉积物的裂隙中,由电阻率测井计算的饱和度平均值为25%.深层水合物充填在砂岩孔隙中,由电阻率计算的饱和度平均为65%.基于声波全波形数据,本文计算了GC955H井储层的声波衰减大小,结果发现两种水合物层对声波衰减的影响不同.泥岩水合物层中的声波衰减与上覆背景泥岩沉积层基本相当.砂岩水合物层的声波衰减大于0.1,最大0.15,远高于上覆和下伏的背景砂岩层.对声波频率的分析发现,GC955H井泥岩层中水合物对声波频率的影响不大,砂岩水合物层的声波频谱与上下背景砂岩层相比发生变化,主频增大.通过对比两种水合物储层的特征,本文初步定性分析了造成水合物对储层声波传播影响不同的原因,包括岩性、水合物饱和度、水合物赋存方式等;但对此的定量描述需要未来更详尽地讨论和研究水合物的声波衰减机制.  相似文献   

14.
In fractured reservoirs, seismic wave velocity and amplitude depend on frequency and incidence angle. Frequency dependence is believed to be principally caused by the wave‐induced flow of pore fluid at the mesoscopic scale. In recent years, two particular phenomena, i.e., patchy saturation and flow between fractures and pores, have been identified as significant mechanisms of wave‐induced flow. However, these two phenomena are studied separately. Recently, a unified model has been proposed for a porous rock with a set of aligned fractures, with pores and fractures filled with two different fluids. Existing models treat waves propagating perpendicular to the fractures. In this paper, we extend the model to all propagation angles by assuming that the flow direction is perpendicular to the layering plane and is independent of the loading direction. We first consider the limiting cases through poroelastic Backus averaging, and then we obtain the five complex and frequency‐dependent stiffness values of the equivalent transversely isotropic medium as a function of the frequency. The numerical results show that, when the bulk modulus of the fracture‐filling fluid is relatively large, the dispersion and attenuation of P‐waves are mainly caused by fractures, and the values decrease as angles increase, almost vanishing when the incidence angle is 90° (propagation parallel to the fracture plane). While the bulk modulus of fluid in fractures is much smaller than that of matrix pores, the attenuation due to the “partial saturation” mechanism makes the fluid flow from pores into fractures, which is almost independent of the incidence angle.  相似文献   

15.
We use a poroelastic modelling algorithm to compute numerical experiments on wave propagation in a rock sample with partial saturation using realistic fluid distribution patterns from tomography scans. Frequencies are in the range 10 to 500 kHz. The rock is a homogeneous isotropic sandstone partially filled with gas and water, which are defined by their characteristic values of viscosity, compressibility and density. We assume no mixing and that the two different pore-fills occupy different macroscopic regions. The von Kármán self-similar correlation function is used, employing different fractal parameters to model uniform and patchy fluid distributions, respectively, where effective saturation is varied in steps from full gas to full water saturation. Without resorting to additional matrix–fluid interaction mechanisms, we are able to reproduce the main features of the variation in wave velocity and attenuation with effective saturation and frequency, as those of published laboratory experiments. Furthermore, the behaviour of the attenuation peaks versus water saturation and frequency is similar to that of White's model. The conversion of primary P-wave energy into dissipating slow waves at the heterogeneities is shown to be the main mechanism for attenuating the primary wavefield. Fluid/gas patches are shown to affect attenuation more than equivalent patches in the permeability or solid-grain properties.  相似文献   

16.
Compressional-wave Q estimation from full-waveform sonic data   总被引：1，自引：0，他引：1  
There is significant evidence that the anelastic loss of seismic energy is linked to petrophysical properties such as porosity, permeability and clay content. Thus, reliable estimation of anelastic attenuation from seismic data can lead to improved methods for the prediction of petrophysical properties. This paper is concerned with methods for the estimation of attenuation at sonic frequencies (5–30 KHz) from in situ data. Two independent methods have been developed and tested for estimating compressional‐wave attenuation from full‐waveform sonic data. A well‐established technique, the logarithm spectral ratio (LSR) method, is compared with a new technique, the instantaneous frequency (IF) method. The LSR method uses the whole spectrum of the seismic pulse whilst the IF method uses a carefully estimated value of instantaneous frequency which is representative of the centre frequency of the pulse. In the former case, attenuation estimation is based on the relative variation of amplitudes at different frequencies, whilst in the latter case it is based on the shift of the centre frequency of the pulse to lower values during anelastic wave propagation. The IF method does not assume frequency independence of Q which is a necessary assumption for the LSR method, and it provides a stable frequency log, the peak instantaneous frequency (PIF) log, which may be used as an indicator for attenuation under certain limitations. The development and implementation of the two methods is aimed at minimizing the effect of secondary arrivals, such as leaky modes, and involved a series of parameter tests. Testing of the two methods using full‐waveform sonic data of variable quality, obtained from a gas‐bearing sandstone reservoir, showed that the IF method is in general more stable and suitable for full‐waveform sonic data compared with the LSR method. This was evident especially in data sets with high background noise levels and wave‐interference effects. For good quality data, the two methods gave results that showed good agreement, whilst comparison with other log types further increased confidence in the results obtained. A significant decrease (approximately 5 KHz) in the PIF values was observed in the transition from an evaporite/shale sequence to the gas‐bearing sandstone. Average Q values of 54 and 51 were obtained using good quality data from a test region within the gas‐saturated sandstone reservoir, using the LSR and IF methods, respectively.  相似文献   

17.
Saturation of porous rocks with a mixture of two fluids has a substantial effect on seismic‐wave propagation. In particular, partial saturation causes significant attenuation and dispersion of the propagating waves due to the mechanism of wave‐induced fluid‐flow. Such flow arises when a passing wave induces different fluid pressures in regions of rock saturated by different fluids. Most models of attenuation and dispersion due to mesoscopic heterogeneities imply that fluid heterogeneities are distributed in a regular way. However, recent experimental studies show that mesoscopic heterogeneities have less idealized distributions and that the distribution itself affects attenuation and dispersion. Based on an approximation for the coherent wavefield in random porous media, we develop a model which assumes a continuous distribution of fluid heterogeneities. As this continuous random media approach assumes that there will be a distribution of different patch sizes, it is expected to be better suited to modelling experimental data. We also show how to relate the random functions to experimentally measurable parameters.  相似文献   

18.
流体分布对松散介质中P波速度和衰减的影响   总被引：3，自引：0，他引：3       下载免费PDF全文
为了深入研究流体对岩石中弹性波速度和衰减的影响,必须考虑到流体的分布和粘性。引入气体包裹体模型来研究粘性流体的分布对松散介质中P波速度和衰减的影响,用气泡平均半径来描述流体分布的不均匀性,计算了不同气泡半径和频率下P波速度和衰减随饱和度变化的曲线,并与有效流体模型作了比较,由于流体喷流的存在会使Gassmann方程在高频下不适用,用干燥和饱和流体的P波、S波速度修正了理论曲线。测量了玻璃微珠中不同水饱和度下高频P波的速度和衰减,并尝试用峰值频率来计算衰减。此方法求出的Q和频谱比法求出的Q在干燥或饱和水时基本相同,随饱和度的变化规律也基本一致,但衰减峰的大小有差异。根据实测值得似事经修正的波速和衰减理论曲线从而估算出气泡平均半径,认为P波速度和衰减不仅与饱和度有关而且也与介质内部气体－液体压力平衡有关。  相似文献   

19.
In many cases, the seismic response of bottom‐simulating reflectors is characterised by low frequencies called “low‐frequency shadow”. Generally, this phenomenon is interpreted as attenuation due to partial saturation with free gas. Actually, this frequency loss may have multiple causes, with a normal moveout stretch as a possible candidate. To analyse this phenomenon, we compute synthetic seismograms by assuming a lossy bottom‐simulating layer, with varying quality factor and thickness, bounded by the upper hydrate‐brine/gas‐brine and lower gas‐brine/brine interfaces. First, we estimate the shift of the centroid frequency of the power spectrum as a function of the travelled distance of the seismic pulse. Then, we perform one‐dimensional numerical experiments to quantify the loss of frequency of the seismic event below the bottom‐simulating reflector as a function of the quality factor of the bottom‐simulating layer and its thickness (due to wave interference). Then, we compute shot gathers to obtain the stacked section, with and without the normal moveout stretch correction and with and without the presence of wave attenuation in the bottom‐simulating layer. The results indicate that the low‐frequency shadow due to the normal moveout stretch is stronger than that due to attenuation and may constitute a false indicator of the presence of gas. In fact, often, the low‐frequency shadow overlies events with higher frequencies, in contradiction with the physics of wave propagation. This is particularly evident when the low‐frequency shadow is so extensive that the presence of high frequencies below cannot be justified by the acquisition geometry.  相似文献   

20.
Seismic amplitudes contain important information that can be related to fluid saturation. The amplitude‐versus‐offset analysis of seismic data based on Gassmann's theory and the approximation of the Zoeppritz equations has played a central role in reservoir characterization. However, this standard technique faces a long‐standing problem: its inability to distinguish between partial gas and “fizz‐water” with little gas saturation. In this paper, we studied seismic dispersion and attenuation in partially saturated poroelastic media by using frequency‐dependent rock physics model, through which the frequency‐dependent amplitude‐versus‐offset response is calculated as a function of porosity and water saturation. We propose a cross‐plotting of two attributes derived from the frequency‐dependent amplitude‐versus‐offset response to differentiate partial gas saturation and “fizz‐water” saturation. One of the attributes is a measure of “low frequency”, or Gassmann, of reflectivity, whereas the other is a measure of the “frequency dependence” of reflectivity. This is in contrast to standard amplitude‐versus‐offset attributes, where there is typically no such separation. A pragmatic frequency‐dependent amplitude‐versus‐offset inversion for rock and fluid properties is also established based on Bayesian theorem. A synthetic study is performed to explore the potential of the method to estimate gas saturation and porosity variations. An advantage of our work is that the method is in principle predictive, opening the way to further testing and calibration with field data. We believe that such work should guide and augment more theoretical studies of frequency‐dependent amplitude‐versus‐offset analysis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号