共查询到20条相似文献，搜索用时 46 毫秒
1.
南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化,为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息,对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题,采用了大容量气枪震源并设计了气枪阵列组合方式,提高了激发地震波的能量,获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法,对VSP观测数据进行处理,获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据,建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系,实现了不同尺度的地质和地球物理属性资料的有效衔接,标定了钻井地质剖面上各深度地质体的地震反射特性,厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息,成为建立南黄海海相地层速度模型主要的资料来源,也是地震资料的岩性反演处理不可缺少的信息. 相似文献
2.
在反射地震转换波资料处理中,准确求取共转换点一直是一个难题,采用叠前时间偏移技术能避免共转换点道集的抽取,而且能够使转换波归位到真正的反射点上,实现准确成像.本文针对火山岩地震屏蔽层的转换波成像问题,通过对转换波共近似转换点道集进行速度分析,建立了转换波叠前时间偏移的初始速度场,通过速度扫描和纵、横波速度比值扫描确定最佳的偏移速度场和纵、横波速度比值,实现了在火山岩高速层覆盖区域的转换波偏移成像.实际资料的成像结果表明,本文采用的近似转换点计算以及转换波叠前时间偏移方法是有效的. 相似文献
3.
深反射地震剖面法为了获取深部结构特征常常采取大的偏移距采集数据.目前公开发表的相关资料中,鲜有利用深反射地震炮集数据获取近地表的结构特征.为此,本文通过正演测试了相关数据处理流程,即利用有限差分正演了起伏地表模型的大偏移距地震单炮弹性波场特征,通过共检波点域面波信号F-K频谱叠加构建新方法,从深反射地震数据集中提取了高品质的多阶面波频散曲线,再利用多阶面波联合反演获得了近地表的结构特征.在前述正演流程基础上,利用跨越班公湖—怒江缝合带的SinoProbe深反射地震剖面中的实际炮集数据,求取了基阶和一阶瑞利波频散曲线,联合反演后得到近地表横波速度结构.该结果与初至波走时反演获取的纵波速度结构具有较好的一致性,且在近地表的浅层分辨率较纵波速度结构特征更高,而更与已有地质认识相吻合.本文提供的相关数据处理流程表明利用深反射地震炮集数据,也能够获取近地表浅层的横波速度结构. 相似文献
4.
共炮检距二维弹性波地震剖面的偏移方法 总被引：4，自引：0，他引：4
共均匀各向同性介质的分界面上入射纵波时，除产生纵波反射Ｐ－Ｐ波外，还会产生转换横波的反射Ｐ－ＳＶ波。同样，当入射波为ＳＶ横波时，在分界面上会同时产生ＳＶ－ＳＶ反射波和ＳＶ－Ｐ反射转换波。对这种二维弹性波地震记录如何进行偏移是探讨的问题。为了能够处理实际地震数据，本文提出在共炮检距剖面上进行二维弹性波记录的偏移方法。 相似文献
5.
实际介质的吸收衰减使地震波能量减弱,主频降低,影响分辨率。在偏移过程中,可以实现吸收衰减的补偿,提高地震资料的分辨率。本文基于高角度时间-空间域单程波方程,推导出能补偿介质吸收衰减的叠前深度偏移波场外推公式。设计了一个复杂构造的地质模型,用声波方程模拟了无吸收衰减和有吸收衰减介质存在时的两种地震炮集记录。用没有补偿吸收衰减和本文讨论的补偿吸收衰减的偏移方法分别处理了两种地震资料,得到无吸收衰减、吸收衰减未得到补偿和得到补偿的三个偏移叠加剖面。补偿后的偏移剖面与没有吸收衰减的地震记录的偏移剖面几乎相同,而有吸收衰减的地震记录用无吸收衰减补偿的偏移方法处理,由于介质的吸收衰减,使吸收衰减层下方的反射信号衰减,主频降低,能量减弱。实际资料的处理结果表明,补偿吸收的偏移剖面的分辨率得到了明显改善。 相似文献
6.
VSP 转换波跟VSP 纵波或常规地面转换波相比，具有较高的分辨率和信噪比，但传统的VSP成像方法只利用了反射P波信息，而把转换波（反射S波、透射S波）以及透射P波当作影响成像质量的噪音.本文给出了一种VSP共炮点道集多分量地震资料克希霍夫法偏移成像的方法.本方法充分利用了多波（反射P波、反射S波、透射P波、透射S波）信息，根据转换点处四种波同时起跳，能量叠加最大的原理，从接收点分别用向绕射点延拓它们的能量，并将其叠加起来，求得的和最大的一点即反射点.通过模型试算和实际资料处理表明，此法成像精度高，信噪比高，且有利于改善剖面的频率特性. 相似文献
7.
多分量地震资料叠前深度偏移技术可以对地下复杂地质构造进行更准确的成像,精确成像的前提是获取准确的纵横波偏移速度。本文采用高斯束偏移方法对多波地震数据进行偏移速度分析,首先分别给出纵波和转换波共偏移距域高斯束叠前深度偏移方法原理,在此基础上抽取纵波和转换波偏移距域共成像点道集;然后根据共成像点道集拉平准则,分别对纵波和横波速度进行更新;当两种波成像深度不一致时,对纵波和转换波成像剖面进行深度匹配,完成高精度的纵横波偏移速度分析。模型数据和实际资料试算表明,该方法是一种有效的多波偏移速度分析方法。 相似文献
8.
在克希霍夫叠前时间偏移处理中,地震波走时的计算方法是决定大偏移距地震资料成像品质的重要因素.在常规的三维转换波各向异性叠前时间偏移公式中,走时的计算是基于等效单层各向异性介质的非双曲线方法.用这种方法处理的成像道集,在偏移/深度比超过一定阈值后,成像道集中的反射同相轴将出现过偏现象,这种偏移不平的同相轴将影响偏移叠加的最佳响应,使得偏移成像波组呈低频化特征,最终降低三维转换波偏移成像质量.我们采用层状介质的走时计算方法代替常规算法,并且利用了常规方法的转换波各向异性偏移速度模型.基于层状介质的算法能够提高大偏移距转换波走时计算精度,克服中浅地层大偏移距远道成像道集中反射同相轴逐渐上翘的问题.两个地区的三维转换波资料处理结果证实,基于层状各向异性介质的转换波克希霍夫叠前时间偏移方法,明显改善了反射成像剖面的连续性和分辨率,提高成像剖面构造的可解释性. 相似文献
9.
按照井间地震的观测系统,用改进的突变点加插值射线追踪方法,追踪每炮每道的射线路径,计算几种主要类型的波沿射线路径的波至时间和射线振幅,制作井间地震多炮多道水平分量和垂直分量的合成记录.并将合成记录选排为井间共炮点道集、共接收点道集、共偏移距道集和共中心深度点道集,系统地分析了不同道集内几种主要类型的地震波的传播特征.对野外观测的实际井间地震记录进行了模拟,从复杂的井间地震记录中,识别出井间地震实际观测到的不同类型的波场,为随后的井间地震资料处理和应用提供了依据. 相似文献
10.
《地球物理学进展》2017,(3)
为了解决三维斜井井间地震数据成像问题,借鉴二维地面地震弯线及宽线处理思路,将三维井间地震成像问题转换成二维成像问题进行研究.利用三维逐段迭代方法对三维斜井井间地质模型进行正演模拟,计算上、下行反射波走时及反射点位置,通过对比正演记录与实际资料的特征,调整地质模型参数获取准确速度场.然后对波场分离后的共炮集数据进行反射波归位,得到共反射点道集数据.最后根据反射点的分布选择一条反射点分布最集中的剖面线,以一定的宽度将剖面线左右的反射点包裹起来;根据叠加宽度划分成大小相等的矩形面元,将面元内的共反射点数据投影到剖面线上进行二维叠加成像.通过模型测试,三维XSP-CDP叠加方法能有效反演地下结构特征,指导三维井间地震采集观测系统的设计并解决不共面斜井叠加成像问题.应用该方法对M地区实际资料进行成像研究,结果表明该方法可有效反演地下三维地质结构特征,为进一步数据处理提供依据. 相似文献
11.
12.
13.
14.
15.
《中国科学:地球科学(英文版)》2014,(3)
正SCIENCE CHINA Earth Sciences,an academic journal cosponsored by the Chinese Academy of Sciences and the National Natural Science Foundation of China,and published by Science China Press and Springer,is committed to publishing high-quality,original results in both basic and applied research. 相似文献
16.
《国际泥沙研究》2014,(4)
正Director:Shangfu Kuang,China Vice-directors:Chunhong Hu,China Duihu Ning,China Guangquan Liu,China The International Research and Training Center on Erosion and Sedimentation(IRTCES)was jointly set up by the Government of China and UNESCO on July 21,1984.It aims at the promotion of international exchange of knowledge and cooperation in the studies of erosion and 相似文献
17.
Richard D. Hey 《地球表面变化过程与地形》1979,4(1):59-72
Feedback mechanisms, which operate upstream through drawdown and backwater effects and downstream through sediment discharge are responsible for channel evolution. By combining these mechanisms with channel processes it euables a dynamic process-response model to be developed to simulate the initial evolution of straight gravel-bed channels. When erosion commences on a land surface, sediment entrained in the headwater reach by hydraulic action is selectively transported, deposited and reworked. This produces a damped oscillation between degradation and aggradation as the channel and valley respond to spatial and temporal variations in sediment calibre and hydraulic conditions. The initial cut and fill phases are responsible for valley incision and floodplain development while secondary and subsequent activity can produce river terraces. Eventually sediment entrainment in the headwaters declines as slopes are reduced. Subsequent channel evolution is relatively insignificant because it is dependent on local weathering activity producing material that can be transported on declining slopes. Therefore landforms produced during the initial phase of development, when local weathering was non-limiting, dominate the landscape. 相似文献
18.
Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the focal mechanism of the main shock （MsS.7） and the probable seismo-tectonics. The precise relocation results indicate that the average horizontal error is 0.31kin in a EW direction and 0.40kin in a NS direction, and the average depth error is 0.48kin. The focal depths vary from 8kin to 14kin, with the predominant distribution at 10kin - 12kin. The epicenter of the main shock is relocated to be 29.69^oN, 115.74^oE and the focal depth is about 10.Skin. Combining the predominant distribution of the earthquake sequence, the focal mechanism of the main shock and the tectonic conditions of N-E- and NW-strike faults growth in the seismic region, we infer that the main shock of the earthquake sequence was caused by a NW striking buried fault in the Rnichang basin. The nature of seismic faults needs to be further explored. 相似文献
19.
《水文科学杂志》2013,58(6)
Abstract The western reservoirs represent the principal groundwater system in Morocco. Demographic, industrial and agricultural developments during the last decade have markedly altered groundwater quality. The Mamora coastal aquifer system is among the Atlantic systems which are most heavily threatened by pollution. Agricultural and industrial activities, and rapid urban growth contribute to the pollution of the groundwater. Contamination transport is facilitated by a high permeability of the aquifer formations. In order to assess the actual groundwater quality of the Mamora aquifer and to understand the influence of the factors generating the pollution, an extensive multidisciplinary research programme is in progress, with hydrochemistry and microbiology playing essential roles. The present paper concerns the spatial distribution of physico-chemical parameters in the groundwater, subjected to domestic, industrial and agricultural pollution. Fifty-seven samples were analysed for several parameters (Ca2+, Mg2+, Na+, K+, Cl?, SO4 2?, HCO3 ?, NO3 ?, pH, electrical conductivity and temperature). The microbiological analysis of 143 samples reveals the presence of four kinds of indicator bacteria in the groundwater resources: faecal Streptococci, faecal coliform, Escherichia coli and Clostridium. The physico-chemical results and bacteriological monitoring show that the nitrate and bacteria concentrations exceed the maximum admissible levels, notably around pumping stations in the sectors of Sidi Taibi, Sidi Ahmed Taleb and Aïn Sbaâ. Contamination is generated by uncontrolled anthropogenic activities and accentuated by the high intrinsic vulnerability of the aquifer system. Several parameters appeared to exceed admissibility standards. Measures are recommended to prevent groundwater pollution in the region. 相似文献
20.
K.-G. Malle 《洁净——土壤、空气、水》1992,20(4):196-204
Zinc in the Environment. In 1990 the world production of zinc ammounted to 7 Mio. metric tons. The main areas of application were: galvanization, alloys like brass and zinc metal. The content in the earth crust varies between 10–300 ppm zinc with a mean of 70 ppm. Uncontaminated surface waters contain less than 10 mg/m3 zinc. Apart from civilization air contains 1–10 ng zinc per m3. These background concentrations are exceeded by orders of magnitude in zinc deposit areas and where anthropogenic influences predominate. Accumulation can occur in sediments and sewage sludge. Molluscs and Algae also accumulate zinc. Zinc is essential for live. With normal food the zinc supply of man is just sufficient. Bioaccumulation of zinc towards man or chronic oversupply of man is not known. Zinc has no teratogenic or mutagenic effects, a suspicion on a carcinogenic effect proved wrong. In stockbreeding and plant cultivation a minimum supply of zinc is necessary. Plants are relatively less sensitive against higher soil contents of zinc. Considering the toxicological and ecotoxicological effects of zinc in the environment, the critical organismens are marine invertebratae like tubifex, daphnia, gammarus and algae. But normally only a minor part of the total zinc contest is biologically available, depending on salt content and pH of the waters. 相似文献