共查询到20条相似文献，搜索用时 46 毫秒
1.
本文在对称地震矩张量反演的基础上,进一步研究了非对称地震矩张量时间域反演的理论与方法,结果表明:非对称地震矩张量反演与对称地震矩张量反演类似,只需将对称地震矩张量反演方法略加改动,即增加3个待解参数,便可实现非对称地震矩张量反演.为了判断非对称地震矩张量反演相对于对称地震矩张量反演是否存在过度拟合,运用了AIC准则 (赤池信息准则).为了定量地描述地震矩张量之间的差异,引入了地震矩张量的矢量表示法.通过分析格林函数与地震矩张量各分量之间的关系,得出:在非对称地震矩张量反演时,若仅用垂直向地动位移数据,将无法区分Mxy与Myx这两个分量, 需要同时运用垂直向与水平向地动位移数据进行联合反演才能区分Mxy与Myx; 若采用不同的速度结构模型或不同的格林函数计算方法,则需重新评估地震矩张量各分量的分辨度问题.为检验非对称地震矩张量反演方法的可行性, 利用合成地震图进行了一系列数值试验.数值试验结果表明,在非对称地震矩张量反演中,有必要引入S波进行P波与S波联合反演以提高反演的准确性和判定断层面的能力. 相似文献
2.
Use of long-period surface waves for rapid determination of earthquake-source parameters 总被引：1，自引：0，他引：1
A method for rapid retrieval of earthquake-source parameters from long-period surface waves is developed. With this method, the fault geometry and seismic moment can be determined immediately after the surface wave records have been retrieved. Hence, it may be utilized for warning of tsunamis in real time. The surface wave spectra are inverted to produce either a seismic moment tensor (linear) or a fault model (nonlinear). The method has been tested by using the IDA (International Deployment of Accelerographs) records. With these records the method works well for the events larger than Ms = 6, and is useful for investigating the nature of slow earthquakes.For events deeper than 30 km, all of the five moment tensor elements can be determined. For very shallow events (d ? 30 km) the inversion becomes ill-conditioned and two of the five source moment tensor elements become unresolvable. This difficulty is circumvented by a two-step inversion. In the first step, the unresolvable elements are constrained to be zero to yield a first approximation. In the second step, additional geological and geophysical data are incorporated to improve the first approximation. The effect of the source finiteness is also included. 相似文献
3.
震源机制解,即对地震矩张量的推断,对于地震研究具有至关重要的意义.应变地震观测是张量观测,与摆式地震仪的位移矢量观测不同,可以为地震研究提供新的数据源.本文讨论用应变地震观测求解震源矩张量的基本原理.在距离震源足够远的地方,地震波可以看成平面波,其性质决定于震源矩张量.假设平面地震波的应变张量可以由震源矩张量通过坐标变换计算得到,就可以通过观测应变地震波求解震源机制.这个假设至少对于双力偶震源机制是成立的.由此可以证明,在理想的无限介质中,只要有两个以上不同地点的应变地震波观测,就可以解出震源矩张量.这为解决震源机制问题提供了新的方法.目前的地震矩张量求解方法需要两方面的条件:或者需要很多观测点(例如体波反演),或者需要长周期地震波资料(例如面波反演).这些方法只适用于分析比较大的地震.对于小震,因为通常其震中周围不会有足够多的摆式地震仪观测点观测到其地震波,而地震波周期又短,难以利用传统方法给出可靠的震源机制解,所以只需少数观测点就能求解震源矩张量的新方法特别有意义.用应变地震观测求解震源机制,可以给出更为精确的结果. 相似文献
4.
—?The aim of our study consists of analyzing potentially non-double-couple seismic events recorded at regional distances. In order to define the nature of the seismic source, a moment tensor inversion is carried out as this method is general enough not to initially constrain the source mechanism. In this paper we present an application to a seismic event induced by a mine collapse which occurred near the town of Halle in Germany. Because of its induced nature, many parameters such as the location and geometry of this seismic source are known. This information allows us to test the influence of inadequate propagation modeling on the moment tensor obtained from the inversion. Green's functions have been computed with the reflectivity method in a flat layered medium, using the European model EurID (Du et? al., 1998; Dufumier et al., 1997). From the inversion of P-wave seismograms recorded by the German Regional Seismic Network will, we obtained a source time function which can be decomposed into two subevents. The first one has a large isotropic part and a deviatoric mechanism with near vertical nodal planes. No volume change is observed for the second subevent, but a deviatoric component opposite of the first one. The addition of S-waves does not change the results of the inversion which are stable. Surface waves were not used because of their poor dispersion curves. Based on the moment tensor obtained from these inversions, the physical process at the source is compatible with a large cavity collapse. 相似文献
5.
Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity* 
下载免费PDF全文
下载免费PDF全文 In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity. 相似文献
6.
7.
Discrimination of induced seismicity by full moment tensor inversion and decomposition 总被引：3，自引：1，他引：2
Human activities, including operations related to mining and reservoir exploitation, may induce seismicity and pose a risk for population and infrastructures. While different observations are commonly used to assess the origin of earthquakes, there is a lack of rules and methods for the discrimination between natural and induced seismicity. The inversion and decomposition of the full moment tensor and the observation of relevant deviation from a pure double couple (DC) model may be an indicator for induced seismicity. We establish here a common procedure to analyse a set of natural and induced events of similar magnitude, which occurred in Germany and neighbouring regions. The procedure is based on an inversion method and on a consistent velocity model and recording network. Induced seismicity is recorded during different mining and/or reservoir exploitations. Moment tensors are inverted using a multi-step inversion approach. This method, which was successfully applied in previous studies at regional and teleseismic distances, is further developed here to account for full moment tensor analysis. We first find a best DC solution and then perform a full moment tensor inversion, fitting full waveforms amplitude spectra at regional distances. The moment tensor solution is decomposed into DC, compensated linear vector dipole and isotropic terms. The discrimination problem is then investigated through the evaluation of distributions of non-DC source components for natural and induced data sets. Results illustrate the potential of the inversion and discrimination approach. Additional detailed analyses are carried out for the two most significant induced earthquakes, and rupture models are compared with the full moment tensor solutions. 相似文献
8.
We propose an inversion scheme for retrieval of characteristics of seismic point sources, which in contrast to common practice,
takes into account anisotropy. If anisotropy is neglected during inversion, the moment tensors retrieved from seismic waves
generated by sources situated in anisotropic media may be biased. Instead of the moment tensor, the geometry of the source
is retrieved directly in our inversion; if necessary, the moment tensor can be then determined from the source geometry aposteriori.
The source geometry is defined by the orientation of the slip vector and the fault normal as well as the strength of the event
given by the size of the slip and the area of the fault. This approach allows direct interpretation of the source geometry
in terms of shear and tensile faulting. It also makes possible to identify volumetric source changes that occur during rupturing.
We apply the described algorithm to one event of the 2000 West Bohemia earthquake swarm episode. For inversion we use information
of the direct P waves. The structure is approximated by three different models determined from travel-time observations. The
models are inhomogeneous isotropic, inhomogeneous anisotropic, and homogeneous anisotropic. For these models we obtain seismic
moments MT = 3.2 − 3.8 × 1014 Nm and left-lateral near-vertical oblique normal faulting on a N-S trending rupture surface. The orientation of the rupture
surface is consistent with fault-plane solutions of earlier studies and with the spatial distribution of other events during
this swarm. The studied event seems to be accompanied by a small amount of crack opening. The amount of crack opening is slightly
reduced when the inhomogeneous anisotropic model is assumed, but it persists. These results and additional independent observations
seem to indicate that tensile faulting occurs as a result of high fluid pressure. 相似文献
9.
震后快速得到地震矩张量, 可以更好地为烈度速报、 应急救援和震后趋势判定等服务。 本文基于中国区域地震台网现状, 对Dreger的矩张量反演方法进行改进。 结合区域地震速报系统, 将系统触发、 地震相关信息与地震波形记录获取、 矩张量反演计算和最佳解挑选等过程实现自动化, 建立了地震矩张量快速自动反演系统。 将该系统在线运行于福建地震台网, 实现了对闽台地区中等强度地震的矩张量在线快速自动反演。 将反演结果与其他研究机构的结果对比, 验证了本文方法的可靠性。 相似文献
10.
重力梯度全张量数据具有高灵敏度反映探测目标局部微弱变化的特点,可以对单一地震数据在建立速度模型过程中的不确定性,尤其是各向异性速度模型建立过程中的精细结构进行补充修正.本文主要研究重震两类数据与各自所反映的物理模型关系以及密度模型与速度模型之间的相互联系和制约关系,从而建立重力全张量数据与地震速度模型间的信息互补关系和模型参数间的解析表达式.在此基础上,提出多参数加权正反演算法流程,逐层异常分离技术和约束条件下迭代反演模型修正方法,并实现模块编程和验证.实验数据和结果表明,重力全张量数据和地震数据多参数融合能够明显提高地震速度建模精度,减小模型解释的不确定性. 相似文献
11.
Theoretical calculations are made to study the observability of isotropic components of seismic sources. In particular we consider the 1970 deep Colombian earthquake, for which a precursory isotropic component was previously reported by Gilbert and Dziewonski.We compare an ultra-long period vertical record at Pasadena of the 1970 event to synthetic seismograms calculated both for Gilbert and Dziewonski's source model and for the pure double-couple source of Furumoto and Fukao, and obtain better overall agreement for the latter. The amplitude of the long-period synthetic for the isotropic source is about 5–15 times smaller than the synthetic for the deviatoric source, suggesting that the data may be relatively insensitive to the presence of a small isotropic source. When this possibility was tested, the overall agreement was found to be almost completely insensitive to the presence of even a reasonably large isotropic component.However, the isotropic source was derived from multi-station moment tensor inversion, rather than from single-station studies. A numerical experiment on the effect of lateral heterogeneity of eigenfrequencies and of Q on the inversion for the moment tensor shows that even relatively small amounts of heterogeneity can produce spurious isotropic sources from moment tensor inversion. 相似文献
12.
Atahebson B. Santos Milton J. Porsani Manuelle S. Góis 《Geophysical Prospecting》2019,67(7):1720-1731
The determination of three-dimensional geometry and acquisition parameters, the seismic acquisition survey design, is constantly subject of studies in obtaining data with the highest seismic quality, operational efficiency and cost minimization. In this paper, we propose a methodology for inverting geometry parameters of three-dimensional orthogonal land seismic surveys based on a direct search method using a mixed-radix based algorithm. In this algorithm, the search space is discretized on a mixed-radix base, which depends on the extreme values and the search resolution of each parameter. We will show how to reparametrize the orthogonal acquisition geometry elements in order to obtain the independents and integers parameters that are necessary to construct the mixed-radix base. For the optimization purpose, we define an objective function to contemplate target parameters associated with the elements of the acquisition geometry directly related to the geophysical and operational constraints. Taking in account that the mathematical functions and the objective function we define for the problem have no significant computational cost, all model space parameters are fast and efficiently tested. We applied the algorithm, using as input data, provided by a one-line roll orthogonal reference geometry, assuming a pair of geological objectives as shallow and deep targets. All selected models that meet both the proposed objectives and the constraints are organized by decreasing order of fitness so that with the mixed-radix inversion algorithm we found not only the best model, but also a set of suitable models. Likewise, with the best set of geometries, it is possible to establish a direct comparison between them, analysing their adherence to the technical and operational requirements according to the availability and degree of detail of each one. We show the top 10 best results as a table, allowing a direct comparison between all aspects of these geometries, and we summarize the results showing graphically the fitness of all selected geometries and the inverted geometry elements for the 1000 best geometries. These graphical displays provide a direct way to understand how each model behaves as the fitness decreases. The algorithm is very flexible and its application can be extended to any environment and type of acquisition geometry, and in any phase study of an area be it regional, exploratory or development. 相似文献
13.
Moment tensor inversion of near-source broadband data 总被引：1，自引：0，他引：1
Ｍｏｍｅｎｔ ｔｅｎｓｏｒ ｉｎｖｅｒｓｉｏｎ ｏｆ ｎｅａｒ－ｓｏｕｒｃｅ ｂｒｏａｄｂａｎｄ ｄａｔａ（吴忠良）（陈运泰（倪江川）（王培德）（王鸣）Ｍｏｍｅｎｔｔｅｎｓｏｒｉｎｖｅｒｓｉｏｎｏｆｎｅａｒ－ｓｏｕｒｃｅｂｒｏａｄｂａｎｄｄａｔａ￥Ｚ... 相似文献
14.
利用地震记录反演震源非均匀特征的一些问题 总被引：3，自引：0，他引：3
金星 《地震工程与工程振动》1997,17(3):15-21
利用地震记录反演震源非均匀特征是目前强震地震学研究中的一个重要的课题。本文在总结现有文献的基础上，对与震源反演相关联的六个环节即震源模型及模型参数、格林函数计算、观测数据、反演准则与目标函数、初始模型与迭代方式、反演精度与分辨率等进行了初步阐述和分析，同时对地震源反演中存在的问题也进行了相应的讨论。 相似文献
15.
16.
Summary A method of determining simultaneously the moment tensor and source time function in the point source approximation is presented. For trial values of the moment tensor components and of the source time function, parametrized by the sum of overlapping triangles delayed in time, theoretical seismograms can be synthetized and compared with the recorded ones. The iterative procedure determines the adjustment of source parameters until a good correlation of both synthetic and observed records is reached. The Green functions in a horizontally stratified medium are constructed with the use of a modal summation method.The limits of applicability of the algorithm are illustrated by the inversion of four synthetic seismograms constructed for two horizontally stratified models of the structure in Friuli area, Italy. The records constructed for the same structural model as for which the Green functions were computed can be inverted even in the high-frequency range. In the opposite case, when the records and Green functions used corresponded to different structural models, a good correlation of the input records with the final synthetics was obtained for low - pass filtered data only.Additional tests performed with input seismograms contaminated with random noise yielded good resolution of the moment tensor and the duration of the source time function even for a high noise to signal ratio. 相似文献
17.
以2008年11月10日大柴旦Ms6．3级地震余震数字地震波观测资料为基础,运用矩张量反演方法,利用单台三分量波形资料计算余震的震源机制。收集整理大柴旦Ms6．3级地震公认的震源参数结果和青海区域地震台网数字地震波资料,以大柴旦Ms6．3级地震的震源参数作为约束,计算理论地震波来确定该区域的地壳速度模型。以此模型计算ML≥2．0级余震震源机制解。共收集160个余震资料,最后确定了85个余震震源机制解,其中最大震级为朋。4．7,最小震级为ML2.0。进行单台与多台联合矩张量反演结果对比,两种方法所确定的结果相差不大。实际计算表明,在观测资料信噪比较高的情况下,运用单台数字地震波观测资料可以较好地确定中小地震的震源机制。 相似文献
18.
文中给出了根据地震释放的总地震矩求解平均应力场的方法,并使用加入随机误差的人工合成震源机制解数据和唐山余震区震源机制解数据对其进行检验。由检验结果可知,该方法可以应用于区域平均应力场的求解。使用的震源机制解资料越多,所得结果越稳定,且更接近真实的区域应力场。该方法的优点是: 用每个地震的震级作为权重,能够较好地反映出大小地震在应力场反演中的不同贡献; 并且在计算过程中不需要知道震源机制解2个节面中哪个节面为地震断层面。 相似文献
19.
Ambiguous Moment Tensors and Radiation Patterns in Anisotropic Media with Applications to the Modeling of Earthquake Mechanisms in W-Bohemia 总被引：3，自引：0，他引：3
Anisotropic material properties are usually neglected during inversions for source parameters of earthquakes. In general anisotropic media, however, moment tensors for pure-shear sources can exhibit significant non-double-couple components. Such effects may be erroneously interpreted as an indication for volumetric changes at the source. Here we investigate effects of anisotropy on seismic moment tensors and radiation patterns for pure-shear and tensile-type sources. Anisotropy can significantly influence the interpretation of the source mechanisms. For example, the orientation of the slip within the fault plane may affect the total seismic moment. Also, moment tensors due to pure-shear and tensile faulting can have similar characteristics depending on the orientation of the elastic tensor. Furthermore, the tensile nature of an earthquake can be obscured by near-source anisotropic properties. As an application, we consider effects of inhomogeneous anisotropic properties on the seismic moment tensor and the radiation patterns of a selected type of micro-earthquakes observed in W-Bohemia. The combined effects of near-source and along-path anisotropy cause characteristic amplitude distortions of the P, S1 and S2 waves. However, the modeling suggests that neither homogeneous nor inhomogeneous anisotropic properties alone can explain the observed large non-double-couple components.The results also indicate that a correct analysis of the source mechanism, in principle, is achievable by application of anisotropic moment tensor inversion. 相似文献
20.
基于岩石物理和地震反演理论,提出了一种同步反演储层孔隙度和含水饱和度的方法.以岩石物理为基础,建立了砂泥岩储层物性和弹性参数之间定量的关系-Simon模型,以贝叶斯理论为手段,结合不同类型的砂泥岩储层,建立了多信息联合约束的物性参数反演目标函数,并通过蒙特卡罗和遗传算法相结合的思路求解该目标函数,最终得到孔隙度和含水饱和度的同步反演结果.将该方法应用于河道砂和砂砾岩两种不同的砂泥岩储层中,孔隙度和含水饱和度数据的联合应用,进一步减少了储层预测的多解性,为石油地质综合研究提供了更加丰富准确的基础数据. 相似文献