共查询到20条相似文献，搜索用时 281 毫秒
1.
天山的晚新生代构造变形及其地球动力学问题 总被引：73，自引：6，他引：73
天山是大陆内部典型的新生代复活造山带，其新生代构造变形的方式，变形量，速度及过程等对于认识大陆内部造山带的变形机理有着重要的意义。本文在对南北天山主要活动构造地质填图和综合研究的基础上，重点探讨了天山的晚新生代构造变形特征及其动力学问题。早更新世以来，特别是早，中更新世之间，天山的构造活动由内部向南北两侧扩展，使得两侧的新生代凹陷逐渐褶皱成山，形成数排新生代褶皱带，整个天山的现代构造活动是一种扇形 相似文献
2.
褶皱逆冲带的几何学研究是造山带研究的热点,但是无论是传统构造地质学方法还是地球物理学方法都在研究褶皱逆冲带几何特征时存在多解性.为了制约这种多解性,本文以天山北麓的呼图壁河剖面为列,介绍一种地质与地球物理相结合的研究方法.该方法首先沿呼图壁河剖面进行详细的地表观测,获取地表的构造地质数据形成初步的地质模型,其次结合地表构造和钻井分层数据,对收集到的石油地震剖面进行重新解释.然而,地震反射数据只分布在盆地内部,在盆山结合带缺失或者不清晰,因此对该剖面进行了重力测量并计算出布格重力异常.结合盆地各沉积地层和基底密度值,用重力正演方法模拟呼图壁河剖面的密度结构.研究结果显示沿呼图壁河剖面并不存在天山北缘断裂,盆地的沉积盖层可以从准噶尔盆地连续过度到天山内部并不整合覆盖在天山古生代基底之上.这一结果与西段金钩河剖面的天山基底逆冲到准噶尔盆地显然不同,说明了天山北缘盆山结合带构造的多样性.利用平衡剖面技术,恢复的呼图壁河平衡剖面缩短量约为4.8 km,对比前人研究,说明了天山北缘的缩短量沿东西方向存在显著的不均一性.本研究也说明这种构造地质与地震及非震地球物理相结合的方法可以广泛地被应用于褶皱逆冲带. 相似文献
3.
THE LATE QUATERNARY ACTIVITY AND FORMATION MECHANISM OF BAOERTU FAULT ZONE,EASTERN TIANSHAN SEGMENT 
下载免费PDF全文
下载免费PDF全文 REN Guang-xue LI Chuan-you WU Chuan-yong WANG Si-yu ZHANG Hui-ping REN Zhi-kun LI Xin-nan 《地震地质》2019,41(4):856-871
Influenced by the far-field effect of India-Eurasia collision, Tianshan Mountains is one of the most intensely deformed and seismically active intracontinental orogenic belts in Cenozoic. The deformation of Tianshan is not only concentrated on its south and north margins, but also on the interior of the orogen. The deformation of the interior of Tianshan is dominated by NW-trending right-lateral strike-slip faults and ENE-trending left-lateral strike-slip faults. Compared with numerous studies on the south and north margins of Tianshan, little work has been done to quantify the slip rates of faults within the Tianshan Mountains. Therefore, it is a significant approach for geologists to understand the current tectonic deformation style of Tianshan Mountains by studying the late Quaternary deformation characteristics of large fault and fold zones extending through the interior of Tianshan. In this paper, we focus on a large near EW trending fault, the Baoertu Fault (BETF) in the interior of Tianshan, which is a large fault in the eastern Tianshan area with apparent features of deformation, and a boundary fault between the central and southern Tianshan. An MS5.0 earthquake event occurred on BETF, which indicates that this fault is still active. In order to understand the kinematics and obtain the late Quaternary slip rate of BETF, we made a detailed research on its late Quaternary kinematic features based on remote sensing interpretation, drone photography, and field geological and geomorphologic survey, the results show that the BETF is of left-lateral strike-slip with thrust component in late Quaternary. In the northwestern Kumishi basin, BETF sinistrally offsets the late Pleistocene piedmont alluvial fans, forming fault scarps and generating sinistral displacement of gullies and geomorphic surfaces. In the bedrock region west of Benbutu village, BETF cuts through the bedrock and forms the trough valley. Besides, a series of drainages or rivers which cross the fault zone and date from late Pleistocene have been left-laterally offset systematically, resulting in a sinistral displacement ranging 0.93~4.53km. By constructing the digital elevation model (DEM) for the three sites of typical deformed morphologic units, we measured the heights of fault scarps and left-lateral displacements of different gullies forming in different times, and the result shows that BEFT is dominated by left-lateral strike-slip with thrust component. We realign the bended channels across the fault at BET01 site and obtain the largest displacement of 67m. And we propose that the abandon age of the deformed fan is about 120ka according to the features of the fan. Based on the offsets of channels at BET01 and the abandon age of deformed fan, we estimate the slip rate of 0.56mm/a since late Quaternary. The Tianshan Mountains is divided into several sub-blocks by large faults within the orogen. The deformation in the interior of Tianshan can be accommodated or absorbed by relative movement or rotation. The relative movement of the two sub-blocks surrounded by Boa Fault, Kaiduhe Fault and BETF is the dominant cause for the left-lateral movement of BETF. The left-lateral strike-slip with reverse component of BETF in late Quaternary not only accommodates the horizontal stain within eastern Tianshan but also absorbs some SN shortening of the crust. 相似文献
4.
根据横跨中国境内天山的库车—奎屯宽频带流动地震台阵和区域地震台网记录的近震和远震P波走时数据，利用地震层析成像方法重建了沿该地震台阵剖面下方400 km深度范围内地壳上地幔的P波速度结构.结果表明：沿新疆库车—奎屯剖面，天山地壳具有明显的横向分块结构，且南、北天山地壳显示了较为强烈的横向变形特征，表明塔里木地块对天山地壳具有强烈的侧向挤压作用；在塔里木和准噶尔地块上地幔顶部有厚度约60～90 km的高速异常体，塔里木—南天山下方的高速异常体产生了较为明显的弯曲变形，而准噶尔—北天山下方的高速异常体向南一直俯冲到中天山南侧边界下方300 km的深度，两者形成了不对称对冲构造；在塔里木和准噶尔地块下方150～400 km深度存在上地幔低速体，其中塔里木地块一侧的上地幔低速物质上涌到南天山地块的下方；在塔里木—南天山200～300 km深度范围的上地幔存在高速异常体，它可能是地幔热物质向上迁移过程融断的塔里木岩石圈的拆离体. 上述结果表明，塔里木地块的俯冲可能涉及整个岩石圈深度，但其前缘仅限于南天山的北缘；青藏高原隆升的远程效应可能不但驱动塔里木岩石圈向北俯冲，同时还造成天山造山带南侧上地幔物质的涌入；天山造山带上地幔广泛存在的低速异常有助于其上地幔的变形，而上地幔物质的强烈非均匀性应有助于推动天山造山带上地幔小尺度地幔对流的形成；根据研究区地壳上地幔速度结构特征推断，新近纪以来天山快速隆升的主要力源来自青藏高原快速隆升的远程效应，相对软弱的上地幔为加速天山造山带的变形和隆升创造了必要条件. 相似文献
5.
Tianshan is one of the longest and most active intracontinental orogenic belts in the world. Due to the collision between Indian and Eurasian plates since Cenozoic, the Tianshan has been suffering from intense compression, shortening and uplifting. With the continuous extension of deformation to the foreland direction, a series of active reverse fault fold belts have been formed. The Xihu anticline is the fourth row of active fold reverse fault zone on the leading edge of the north Tianshan foreland basin. For the north Tianshan Mountains, predecessors have carried out a lot of research on the activity of the second and third rows of the active fold-reverse faults, and achieved fruitful results. But there is no systematic study on the Quaternary activities of the Xihu anticline zone. How is the structural belt distributed in space?What are the geometric and kinematic characteristics?What are the fold types and growth mechanism?How does the deformation amount and characteristics of anticline change?In view of these problems, we chose Xihu anticline as the research object. Through the analysis of surface geology, topography and geomorphology and the interpretation of seismic reflection profile across the anticline, we studied the geometry, kinematic characteristics, fold type and growth mechanism of the structural belt, and calculated the shortening, uplift and interlayer strain of the anticline by area depth strain analysis.
In this paper, by interpreting the five seismic reflection profiles across the anticline belt, and combining the characteristics of surface geology and geomorphology, we studied the types, growth mechanism, geometry and kinematics characteristics, and deformation amount of the fold. The deformation length of Xihu anticline is more than 47km from west to east, in which the hidden length is more than 14km. The maximum deformation width of the exposed area is 8.5km. The Xihu anticline is characterized by small surface deformation, simple structural style and symmetrical occurrence. The interpretation of seismic reflection profile shows that the deep structural style of the anticline is relatively complex. In addition to the continuous development of a series of secondary faults in the interior of Xihu anticline, an anticline with small deformation amplitude(Xihubei anticline)is continuously developed in the north of Xihu anticline. The terrain high point of Xihu anticline is located about 12km west of Kuitun River. The deformation amplitude decreases rapidly to the east and decreases slowly to the west, which is consistent with the interpretation results of seismic reflection profile and the calculation results of shortening. The Xihu anticline is a detachment fold with the growth type of limb rotation. The deformation of Xihu anticline is calculated by area depth strain analysis method. The shortening of five seismic reflection sections A, B, C, D and E is(650±70) m, (1 070±70) m, (780±50) m, (200±40) m and(130±30) m, respectively. The shortening amount is the largest near the seismic reflection profile B of the anticline, and decreases gradually along the strike to the east and west ends of the anticline, with a more rapidly decrease to the east, which indicates that the topographic high point is also a structural high point. The excess area caused by the inflow of external material or outflow of internal matter is between -0.34km2 to 0.56km2. The average shortening of the Xihubei anticline is between(60±10) m and(130±40) m, and the excess area caused by the inflow of external material is between 0.50km2 and 0.74km2. The initial locations of the growth strata at the east part is about 1.9~2.0km underground, and the initial location of the growth strata at the west part is about 3.7km underground. We can see the strata overlying the Xihu anticline at 3.3km under ground, the strata above are basically not deformed, indicating that this section of the anticline is no longer active. 相似文献
In this paper, by interpreting the five seismic reflection profiles across the anticline belt, and combining the characteristics of surface geology and geomorphology, we studied the types, growth mechanism, geometry and kinematics characteristics, and deformation amount of the fold. The deformation length of Xihu anticline is more than 47km from west to east, in which the hidden length is more than 14km. The maximum deformation width of the exposed area is 8.5km. The Xihu anticline is characterized by small surface deformation, simple structural style and symmetrical occurrence. The interpretation of seismic reflection profile shows that the deep structural style of the anticline is relatively complex. In addition to the continuous development of a series of secondary faults in the interior of Xihu anticline, an anticline with small deformation amplitude(Xihubei anticline)is continuously developed in the north of Xihu anticline. The terrain high point of Xihu anticline is located about 12km west of Kuitun River. The deformation amplitude decreases rapidly to the east and decreases slowly to the west, which is consistent with the interpretation results of seismic reflection profile and the calculation results of shortening. The Xihu anticline is a detachment fold with the growth type of limb rotation. The deformation of Xihu anticline is calculated by area depth strain analysis method. The shortening of five seismic reflection sections A, B, C, D and E is(650±70) m, (1 070±70) m, (780±50) m, (200±40) m and(130±30) m, respectively. The shortening amount is the largest near the seismic reflection profile B of the anticline, and decreases gradually along the strike to the east and west ends of the anticline, with a more rapidly decrease to the east, which indicates that the topographic high point is also a structural high point. The excess area caused by the inflow of external material or outflow of internal matter is between -0.34km2 to 0.56km2. The average shortening of the Xihubei anticline is between(60±10) m and(130±40) m, and the excess area caused by the inflow of external material is between 0.50km2 and 0.74km2. The initial locations of the growth strata at the east part is about 1.9~2.0km underground, and the initial location of the growth strata at the west part is about 3.7km underground. We can see the strata overlying the Xihu anticline at 3.3km under ground, the strata above are basically not deformed, indicating that this section of the anticline is no longer active. 相似文献
6.
新生代期间强烈而持久的再生造山作用,在天山地区形成了大量近EW向逆断裂-褶皱带,引起地壳强烈缩短,穿插有NW向“类转换断层”,显示出天山地区近NS向不均匀的构造挤压作用;区域上地震构造主要为近EW向逆断裂-褶皱带或盲逆断层,其次为NW向“类转换断层”。巴楚-伽师地震区位于南天山柯坪塔格推覆构造系以南,NE向跨越极震区、长约50km的深地震反射探测表明,1997年伽师强震群的发震构造推测为NW向隐伏“类转换断层”,2003年巴楚-伽师地震(MS6·8)的发震构造为柯坪塔格推覆构造系南缘尚未出露地表的近EW向盲逆断层系 相似文献
7.
塔里木西缘明尧勒活动背斜两翼河流阶地面上多处发育活动弯滑断层陡坎。这些断坎主要分布在活动轴面附近较陡的等斜岩层(地层倾角分别为74°~89°、18°~20°和45°~60°)一翼,往往成排发育在距活动轴面50~1 200m范围内,宽90~1 000m,长40~950m,随着离活动轴面的距离加大弯滑断层陡坎规模渐小。同一阶地面上发育的弯滑断层陡坎几乎以等间距或间距倍数关系产出。这些断坎走向与下伏基岩地层走向一致,基岩地层大多为中-厚层块状砂岩或粉砂岩互层,岩层间力学性质差异较小。明尧勒背斜南翼克孜勒苏河北岸T3阶地面废弃以来,单条弯滑断层的地表最大缩短速率为0.31mm/a,地表最大抬升速率为0.34mm/a。这些弯滑断层的活动具有重复性和新生性。 相似文献
8.
焉耆盆地是塔里木盆地东北缘天山山间的重要坳陷区,盆地北缘发育的和静逆断裂-褶皱带是一条现今活动强烈的逆断裂-褶皱带,对其第四纪以来缩短量和隆升量的计算有利于分析该区域的构造活动情况,对缩短速率和隆升速率的估计可以与天山造山带其他区域的活动速率进行横向对比,从而反映出焉耆盆地在天山晚新生代构造变形的作用。在深部资料不足的情况下,对背斜形态完整、构造样式简单的和静逆断裂-褶皱带,利用地表可获得的地层和断层产状,通过恢复褶皱几何形态,计算褶皱的缩短量、隆升量和断层滑动量,得到逆断裂-褶皱带早更新世晚期(1.8Ma)、中更新世(780ka)和晚更新世中期(80ka)以来的缩短量分别为1.79km、0.88km和26m,初步估计的缩短速率分别为0.99mm/a、1.13mm/a和0.33mm/a。显示和静逆断裂-褶皱带自开始形成以来构造活动强度并不一致。与地壳形变观测结果对比,作为南天山东段最主要的坳陷区,焉耆盆地吸收了这一区域(86°～88°E)的大部分地壳缩短,且主要表现为盆地北缘新生逆断裂-褶皱带的强烈变形。 相似文献
9.
发育在帕米尔弧形推覆构造带最前缘的木什活动背斜是一南缓北陡的第四纪滑脱褶皱,背斜的最小地壳缩短量为0.7km,构造隆升幅度可达1.5km.木什背斜北翼逆断层由一系列坡向北的反向断层陡坎组成,不同断坎间垂直位移分布呈现此消彼长的特征,不论是整个北翼逆断层西段还是单条断坎,其垂直位移均呈东高西低的不对称分布,位移梯度东高西... 相似文献
10.
FOCAL MECHANISM SOLUTION AND TECTONIC STRESS FIELD CHARACTERISTICS OF THE MIDDLE TIANSHAN MOUNTAINS,XINJIANG 下载免费PDF全文
下载免费PDF全文 ZHANG Zhi-bin ZHAO Xiao-cheng REN Lin 《地震地质》1979,42(3):595-611
The middle part of the Tianshan Mountains in Xinjiang is located in the north-central part of the Tianshan orogenic belt, between the rigid Tarim Basin and Junggar Basin. It is one of the regions with frequent deformation and strong earthquake activities. In this paper, 492 MS>2.5 earthquake events recorded by Xinjiang seismograph network from 2009 to 2018 were collected. The MS3.5 earthquake was taken as the boundary, the focal mechanism solutions of the earthquake events in this region were calculated by CAP method and FOCEMEC method respectively. At the same time the focal mechanism solutions of GCMT recorded historical earthquake events in this region were also collected. According to the global stress map classification standard, the moderate-strong earthquakes in the region are mainly dominated by thrust with a certain slip component, which are distributed near the combined belts of the Tarim Basin, Junggar Basin, Turpan Basin and Yili Basin with Tianshan Mountains. The thrust component decreases from south to north, while the strike-slip component increases. The spatial distribution characteristics of the tectonic stress field in the middle section of the Tianshan Mountains in Xinjiang are obtained by using the damped regional-scale stress field inversion method. The maximum principal compressive stress in axis the study area rotated in a fan shape from west to east, the NW direction in the western section gradually shifted to NE direction, its elevation angle is nearly horizontal, in the state of near horizontal compression. The minimum principal compressive stress axis is nearly EW, and the elevation angle is nearly vertical. Influenced by large fault zones such as Kashi River, Bolhinur, Nalati, Fukang, the southern margin of the Junggar and the north Beiluntai, the local regional stress field presents complex diversity. Under the influence of the northward extrusion of Pamir and Tarim blocks, the whole Tianshan is shortened by compression, but its shortening rate decreases from south to north and from west to east, the stress shape factor increases gradually from west to east, the intermediate principal compressive stress axis exhibits a change in compression to extension. There are some differences in the characteristics of tectonic stress field between the north and south of Tianshan Mountains. The regional maximum principal compressive stress axis is 15° north by east on the south side, while it is nearly NS on the north side. The deformation of the Tianshan Mountains and the two basins on both sides is obviously larger than that in the inside of the mountain. Changes in the crustal shortening rate caused by the rotation of the rigid Tarim block and Junggar block to the relatively soft Tianshan block, as well as the uplifts of Borokonu and Bogda Mountains, the comprehensive influence of the material westward expansion constitute the stress field distribution characteristics of the north and south sides of the middle section of Tianshan Mountains. The recent two MS6.6 earthquakes in the region caused the regional stress field to rotate counterclockwise. The post-earthquake stress field and the main source focal mechanism solution tend to be consistent. The seismic activity in the study area is week in the south and strong in the north. The focal depth is about 20km. Most strike-slip earthquakes occur near the junction belt of the Tianshan and Junggar Basin. 相似文献
11.
卡兹克阿尔特断裂带活动特征 总被引：7，自引：0，他引：7
卡兹克阿尔特断裂带是帕米尔和天山新生代造山带间一个重要的活动构造边界,通过对其活动构造特征的详细地质调查和大比例尺填图,可将卡兹克阿尔特断裂带进一步划分为吉勒格由特断裂带、乌恰地震断裂带和木什断裂带3段.吉勒格由特断裂带的地表破裂为一系列的断层陡坎和偏转的冲积扇,经过别尔托阔依河出山口处时,切割了T1至T3堆积阶地.断裂带在T1、T2和T3阶地的断层陡坎高度分别为0.67m、3.90m和36.50m.对采自T2阶地顶部和底部的粉砂样品进行光释光测年,测定的初步结果分别为8900aBP和10500aBP,因此对T3、T2阶地以来的滑动速率估计分别约为3.5mm/a、0.8mm/a.断裂的前缘开挖的探槽揭示出全新世以来有4次古地震活动.乌恰地震带主要切割克兹勒苏河的T3阶地后缘,沿断裂带分布有大小不等的断塞塘和断层陡坎.1985年8月23日在乌恰地震带上发生Ms7.4地震,地震最大位错为1.5m.根据断层陡坎计算出断裂的滑动速率约为0.54mm/a.卡帕河的东岸探槽同样揭示出有4次古地震活动.在乌恰地震带的东端,木什断裂带地表长度约6km,由数十条左阶排列的反向断层陡坎(坡向北)组成,沿这些断坎多处可见冲沟被断错,横跨断层陡坎的探槽揭示出3次古地震活动. 相似文献
12.
乌鲁木齐西山断裂组与地表破裂型逆断层古地震识别标志 总被引：3，自引：5，他引：3
乌鲁木齐西山断裂层组展布于北天山山前断展褶皱系与博格达推覆构造系的转换部位,为盆地向S推覆的构造,由4～5条长度十几公里至近30km的断层组成,其滑脱面埋深约11km。通过地质地貌调查、探槽开挖,结合深部构造特征分析,西山断裂组晚更新世中晚期有明显的活动。断层F1—F3最年轻的2次事件基本都被限制在距今(22.7±5.2)ka和40ka左右。而F4和西山断裂最年轻的事件被距今31.0ka和38.0ka的地层覆盖。这显示西山断裂组晚第四纪活动有分组和组合破裂的特征。断层F4和西山南缘断裂为一组,F1—F3为另一组。坎前堆积地层、断层与堆积地层的切错关系和不同间断面或标志地层在断层两侧的累积位差的突变,是识别地表破裂型逆断层古地震事件的重要标志。降低逆断层古地震识别的不确定性,关键在于识别事件的标志需要综合分析各种影响因素,有多证据的支持 相似文献
13.
Chuanyong Wu Jun Shen Jun Li Zhiyong Xiang Jun Hu Yili Ya'er Earthquake Administration of Xinjiang Uygur Autonomous Region Urumqi China 《地震学报(英文版)》2009,(1):69-74
We have made careful field investigation and trench exploration to the Xishan fault system in west of Urumqi,and an integrated analysis in conjunction with data of deep seismic sounding.Our result suggests that under the SN-oriented compressive stress,the Xishan block moves steadily toward the Tianshan Mountains in south,resulting in southward thrust-slip and crustal shortening,particularly the southward thrust of the Xishan fault which serves as the main boundary in south.North of the Xishan fault are the ... 相似文献
14.
15.
褶皱陡坎中相关断层在缩短量计算中的作用——以东秋里塔格背斜为例 总被引：1，自引：1，他引：0
通过对东秋里塔格背斜地区内与褶皱陡坎伴生的次级断层进行的地质调查,确定了该次级断层属于伸出向斜的逆冲断层,也给出了次级断层的发生时间晚于褶皱作用起始时间的1个变形实例。褶皱陡坎中发育的次级断层使得陡坎上盘地层沿断层面整体向上迁移,不仅次级断层使得阶地面发生掀斜并增大褶皱陡坎的坡度,而且直接影响了区域缩短增量计算的真实性。计算结果显示,当不考虑次级断层对褶皱陡坎高度的影响时,计算所得缩短增量为51.42m,考虑次级断层对褶皱陡坎高度的影响时,计算得到的地壳缩短量为45.23m。二者相差6.19m,偏差占总缩短增量的13.7%,是一个不可忽视的量值。东秋里塔格背斜北翼和南翼的褶皱陡坎发育于相同岩性的基岩中而且具有相同的形成机制。但是背斜北翼在水平距离不足300m的范围内发育了3级褶皱陡坎,这表明北翼相对于南翼,其活动枢纽带更为紧闭。这是由于北翼存在更加强烈的挤压应力及更加快速的隆升作用。因此,次级断层的研究对于正确认识区域构造演化、了解褶皱与断层相互作用关系具有重要意义。但是仍存在很多问题:1)受观察剖面范围有限、次级断层分布不连续和断距沿延伸方向不断增大等因素的制约,次级断层对缩短增量造成的影响可能被低估,计算结果应为缩短量的最小值。2)次级断层增加的陡坎高度与断层的断距、倾角具有怎样的定量关系?3)若次级断层只发育于活动枢纽带内,又会产生怎样的影响?这些问题还需更多的研究实例来进行更加深入的研究。 相似文献
16.
Tian Qinjian 《中国地震研究》2007,21(1):74-84
The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles. 相似文献
17.
FAULTED LANDFORM AND SLIP RATE OF THE JINGHE SECTION OF THE BOLOKENU-AQIKEKUDUKE FAULT SINCE THE LATE PLEISTOCENE 下载免费PDF全文
下载免费PDF全文 The Bolokonu-Aqikekuduke fault zone(Bo-A Fault)is the plate convergence boundary between the middle and the northern Tianshan. Bo-A Fault is an inherited right-lateral strike-slip active fault and obliquely cuts the Tianshan Mountains to the northwest. Accurately constrained fault activity and slip rate is crucial for understanding the tectonic deformation mechanism, strain rate distribution and regional seismic hazard. Based on the interpretation of satellite remote sensing images and topographic surveys, this paper divides the alluvial fans in the southeast of Jinghe River into four phases, Fan1, Fan2, Fan3 and Fan4 by geomorphological elevation, water density, depth of cut, etc. This paper interprets gullies and terrace scarps by high-resolution LiDAR topographic data. Right-laterally offset gullies, fault scarps and terrace scarps are distributed in Fan1, Fan2b and Fan3. We have identified a total of 30 right-laterally offset gullies and terrace scarps. Minimum right-lateral displacement is about 6m and the maximum right-lateral displacements are(414±10)m, (91±5)m and(39±1)m on Fan2b, Fan3a and Fan3b. The landform scarp dividing Fan2b and Fan3a is offset right-laterally by (212±11)m. Combining the work done by the predecessors in the northern foothills of the Tianshan Mountains with Guliya ice core climate curve, this paper concludes that the undercut age of alluvial fan are 56~64ka, 35~41ka, 10~14ka in the Tianshan Mountains. The slip rate of Bo-A Fault since the formation of the Fan2b, Fan3a and Fan3b of the alluvial-proluvial fan is 3.3~3.7mm/a, 2.2~2.6mm/a and 2.7~3.9mm/a. The right-lateral strike-slip rate since the late Pleistocene is obtained to be 3.1±0.3mm/a based on high-resolution LiDAR topographic data and Monte Carlo analysis. 相似文献
18.
19.
20.
祁漫塔格北缘断裂处于青藏高原内部造山带地区,其构造活动反映了青藏高原的构造演化特征。本文采用活动构造和构造地貌相结合的研究方法,对该断裂的活动性进行初步分析研究。首先采用航卫片解译和野外调查,发现该断裂断错了山前全新世冲洪积扇,形成的断层陡坎高度在1.5~2.5m。通过扩散方程,并参考前人研究结果,认为祁漫塔格北缘断裂晚第四纪的抬升速率初步限定在1~2mm/a。我们基于数字高程模型提取的地形高程纵剖面和面积-高程积分,其结果也支持祁漫塔格北缘存在构造活动。 相似文献