共查询到20条相似文献，搜索用时 31 毫秒
1.
为提高斜交网格结构的抗震性能,提出一种双防线可恢复性能斜交网格结构。双防线可恢复性能斜交网格结构采用剪切耗能段和特定梁端塑形铰进行集中耗能,使主体结构构件保持弹性。剪切耗能段不承受和传递重力荷载,易在震后修复或更换,使建筑可迅速恢复功能。为实现目标耗能机制,对等效能量塑形设计法进行改进以适用于可恢复性能斜交网格结构,并进行结构设计举例。采用OpenSees软件对所设计结构建立详细的有限元计算模型,进行非线性动力时程分析,以验证双防线耗能机制并评估抗震性能。分析结果表明:（1）小震、中震和大震下的结构顶部位移角分别为0.28%、0.8%和1.7%,与性能设计目标基本相同;（2）中震时剪切耗能段屈服,特定梁端未出现塑性铰;（3）大震时,特定梁端出现塑性铰以增加结构耗能能力,剪切耗能段屈服且处于延性范围内。因此新型可恢复性能斜交网格结构具有有效的双防线耗能机制,在中震后可迅速修复,在大震中可保持延性,实现"中震可修,大震不倒"的性能目标。 相似文献
2.
Fabio Mazza 《Bulletin of Earthquake Engineering》2016,14(4):1311-1331
A displacement-based design procedure using hysteretic damped braces (HYDBs) is proposed for the seismic retrofitting of unsymmetric-plan structures. An expression of the viscous damping equivalent to the hysteretic energy dissipated by the damped braced frame is proposed under bidirectional seismic loads, where corrective factors are assumed as a function of design parameters of the HYDBs. To this end, the nonlinear dynamic analysis of an equivalent two degree of freedom system is firstly carried out on seven pairs of real ground motions whose displacement response spectra match, on average, the design spectrum proposed by the Italian seismic code for a high-risk seismic zone and a medium subsoil class. Then, the extended N2 method considered by the European seismic code, which combines the nonlinear static analysis along the in-plan principal directions of the structure with elastic modal analysis, is adopted to evaluate the higher mode torsional effects. The town hall of Spilinga (Italy), a reinforced concrete (r.c.) framed building with an L-shaped plan, is supposed to be retrofitted with HYDBs. Six structural solutions are compared considering two alternative in-plan distributions of the HYDBs, to eliminate (elastic) torsional effects, and three design values of the frame ductility combined with a constant design value of the damper ductility. To check the effectiveness and reliability of the DBD procedure, the nonlinear static analysis of the test structures is carried out, by evaluating the vulnerability index of r.c. frame members and the ductility demand of HYDBs for different in-plan directions of the seismic loads. 相似文献
3.
对3种不同厚度的钢材标准试件进行酸性大气环境气雾加速腐蚀试验,并对锈蚀后的试件进行单向拉伸试验,得到钢材力学性能随失重率的衰变规律。同时考虑构件截面削弱与材料力学性能降低,建立不同锈蚀程度下的钢框架有限元分析模型,利用非线性静力推覆分析得到锈蚀钢框架结构的整体初始刚度随锈蚀程度增大的退化规律,以表征结构因锈蚀造成的损伤。提出同时反映最大变形效应和累积耗能效应的双参数结构整体地震损伤模型,并在此损伤模型的基础上集合钢材材性试验结果及有限元分析结果,提出适用于锈蚀钢结构的"时变"损伤模型。对比分析以层间位移角及时变损伤模型为性能指标建立的不同龄期钢框架结构的地震易损性曲线,结果表明:随着锈蚀程度的增加,在相同地震动强度下结构超越某一极限状态的失效概率均增大。 相似文献
4.
Incremental dynamic analysis and nonlinear static pushover analysis are carried out on a performance-based design to determine the seismic demands and capacities of an elliptic braced moment resisting frame (ELBRF). The objective is to assess ductility, overstrength and response modification factors in a modern steel-braced structural system based on incremental dynamic analysis. This integrated system is connected to a beam and column with an appropriate length while providing enough architectural space to allow for an opening without having the common problems associated with architectural spaces in braced systems. Several different classes of buildings are considered on soil type II. Linear dynamic analysis, nonlinear static pushover analysis and incremental nonlinear dynamic analysis related to 12 records from past earthquakes are carried out using OpenSees software. The factors of ductility, overstrength and response modification are calculated for this system. The values of 9.5 and 6.5 are found and suggested only for the response modification factor for ELBRF systems in allowable stress and ultimate limit state methods, respectively. The fragility curves are plotted for the first time for this type of bracing, which contributes to the assessment of building seismic damage. 相似文献
5.
剪切型结构的抗震强度折减系数研究 总被引：1，自引：0，他引：1
为了研究剪切型结构抗震强度需求的变化规律,本文基于单自由度体系的非线性时程分析,研究了不同场地条件下延性折减系数与位移延性系数和结构自振周期的关系;采用修正等效单自由度体系位移延性折减系数的方法,研究了剪切型多自由度体系的延性折减系数;以基于中国建筑抗震规范设计的代表不同抗震能力要求的RC框架结构为分析对象,通过静力弹塑性分析,研究了RC框架结构的体系超强能力。分析结果表明场地类别、位移延性水准和结构振动周期对单自由度体系的延性折减系数有显著的影响;多自由度体系的抗震延性折减系数明显比其相应的等效单自由度体系的抗震延性折减系数小;RC框架结构的超强系数一般随结构楼层数的增加而减小,随抗震设防烈度的增大而减小,内框架的超强系数比边框架的超强系数大。 相似文献
6.
总结采用梁有效翼缘来考虑楼板及配筋对“强柱弱梁”机制形成的影响的实验和数值仿真研究。基于SAP2000采用三种侧向加载模式对RC框架结构不带楼板、不带楼板考虑梁刚度放大、带楼板的三个模型进行pushover分析,对力与位移的关系曲线、塑性铰的出铰顺序以及顶点位移与层间位移等方面进行探讨。结果表明:三个模型的“强柱弱梁”现象不带楼板的纯框架结构最明显,考虑梁刚度放大的模型次之,带楼板结构最不明显,证明负弯矩承载力和刚度等反映“强柱弱梁”的参数及塑性铰的出现顺序与楼板、板内配筋存在明显的对应关系;楼板及配筋影响框架结构的整体变形性能和塑性耗能能力,是抗震延性机制实现的重要影响因素。在后续的结构设计中,建议考虑实际楼板和钢筋建模进行计算分析。 相似文献
7.
强震发生后通常伴随着余震,余震的发生会加重结构损伤甚至引发倒塌。为了量化研究主余震序列型地震动对结构损伤的影响,以一栋3层钢筋混凝土框架结构为研究对象,选取了10条实际的主余震记录作为地震动输入,采用ABAQUS非线性有限元软件对该框架结构进行非线性动力时程分析,并依据结构局部和整体损伤耗能指标来评价主余震序列型地震动对框架结构累积损伤的影响。研究结果表明:序列地震会加剧结构底层柱的局部损伤耗能,特别是对底层中柱的影响更加明显;序列地震作用下的结构整体损伤耗能平均值相对于单主震作用下增加约30%;当余震与主震的第一周期谱加速度指标的比值Sa （T1）余震/Sa （T1）主震较大时,序列地震对结构损伤需求的影响更为显著。 相似文献
8.
提出基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估方法,采用强度与延性法分析混凝土高层建筑构件强度和变形,以对强震作用下混凝土高层建筑结构性能实施准确描述。基于建筑结构性能以及多条地震波情况下高层建筑结构倒塌极限状态的分析规范,采用IDA方法设置建筑结构抗倒塌能力系数,并依据该系数获取基于构件性能的混凝土高层建筑结构地震破坏抗毁能力评估流程,实现建筑结构地震破坏抗毁能力的准确评估。实验结果说明,所提方法实现了混凝土高层建筑结构地震破坏抗毁能力的准确评估。 相似文献
9.
为进一步改善框架结构平面内和平面外抗震性能,本文提出带X形斜撑的新型砌体填充墙构造方案,并进行了4榀蒸压加气混凝土砌块砌体填充墙框架结构试验,以研究墙体构造措施和墙-框连接方式对框架结构抗震性能的影响。首先进行平面内水平低周往复荷载试验,随后进行历经平面内损伤的平面外单调静力加载试验,最后进行承载力、刚度退化和耗能能力等抗震性能指标的分析。结果表明:墙-框柔性连接方案下,填充墙框架结构的平面内及平面外水平承载力和初始刚度均小于刚性连接方案,而变形能力、耗能能力和位移延性等性能指标均比刚性连接表现更好;墙-框柔性连接且填充墙带X形斜撑框架结构的平面内及平面外抗震性能指标均有明显改善,更有利于抗震。 相似文献
10.
本文针对云南洱源县振戎中学食堂钢钢筋混凝土耗能减振体系，首先建立了耗能减振结构构件的恢复力模型，其次，结合文献[10]提出的“三水准”地震损伤性能目标和文献[11]中的简化设计方法以及ＡＴＣ－４０报告中的能力谱法，对此结构在大震下的地震损伤性能进行了分析和设计验算，最后考察了耗能关振装置对结构损伤性能的控制效果。 相似文献
11.
This study describes the seismic performance of an existing five storey reinforced concrete building which represents the typical properties of low-rise non-ductile buildings in Turkey. The effectiveness of shear walls and the steel bracings in retrofitting the building was examined through nonlinear static and dynamic analyses. By using the nonlinear static analysis, retrofitted buildings seismic performances under lateral seismic load were compared with each other. Moreover, the performance points and response levels of the existing and retrofitting cases were determined by way of the capacity-spectrum method described in ATC-40 (1996). For the nonlinear dynamic analysis the records were selected torepresent wide ranges of duration and frequency content. Considering the change in the stiffness and the energy dissipation capacities, the performance of the existing and retrofitted buildings were evaluated in terms of story drifts and damage states. It was found that each earthquake record exhibited its own peculiarities, dictated by frequency content, duration, sequence of peaks and their amplitude. The seismic performance of retrofitted buildings resulted in lower displacements and higher energy dissipation capacity depending mainly on the properties of the ground motions and the retrofitting strategies. Moreover, severe structural damage (irreparable or collapse) was observed for the existing building. However, buildings with retrofit alternatives exhibited lower damage levels changing from no damage to irreparable damage states. 相似文献
12.
目前我国房屋建筑抗震采用的以小震弹性计算为基础的设计方法,使工程师忽视了对建筑结构在强烈地震作用下破坏模式的充分考虑与设计,使得建筑结构的大震安全性有时难以得到保证。＂破坏-安全＂抗震理念,以房屋建筑最重要的抗震安全性能为目标,要求设计人员对结构的预期破坏模式有充分的把握和控制,使结构在强烈地震作用下能够形成明确的预期破坏模式并具备一定的耗能能力,从而以经济的代价保证结构其余部分在强烈地震作用下的安全。本文结合我国汶川地震灾后恢复重建与加固改造的实际情况,介绍了＂破坏-安全＂抗震理念及其设计概念,并介绍了国内外研究人员与工程师在实现＂破坏-安全＂抗震理念方面所提出的创新抗震结构体系及其研究成果。希望＂破坏-安全＂这一抗震理念及其相关技术能够在我国广大的经济欠发达地区的抗震设计实践中得到推广,以全面提高我国经济欠发达地区房屋建筑的抗震安全性。 相似文献
13.
Though rocking shallow foundations could be designed to possess many desirable characteristics such as energy dissipation, isolation, and self-centering, current seismic design codes often avoid nonlinear behavior of soil and energy dissipation beneath foundations. This paper compares the effectiveness of energy dissipation in foundation soil (during rocking) with the effectiveness of structural energy dissipation devices during seismic loading. Numerical simulations were carried out to systematically study the seismic energy dissipation in structural elements and passive controlled energy dissipation devices inserted into the structure. The numerical model was validated using shaking table experimental results on model frame structures with and without energy dissipation devices. The energy dissipation in the structure, drift ratio, and the force and displacement demands on the structure are compared with energy dissipation characteristics of rocking shallow foundations as observed in centrifuge experiments, where shallow foundations were allowed to rock on dry sandy soil stratum during dynamic loading. For the structures with energy dissipating devices, about 70–90% of the seismic input energy is dissipated by energy dissipating devices, while foundation rocking dissipates about 30–90% of the total seismic input energy in foundation soil (depending on the static factor of safety). Results indicate that, if properly designed (with reliable capacity and tolerable settlements), adverse effects of foundation rocking can be minimized, while taking advantage of the favorable features of foundation rocking and hence they can be used as efficient and economical seismic energy dissipation mechanisms in buildings and bridges. 相似文献
14.
提出了一种安全性高、成本低的新型摩擦"塑性铰"构造的概念和几何设计,以实现精准耗能和大震可修的延性设计抗震目标。以钢结构梁柱延性节点的设计理论为基础,推导了该构造的力学性能理论和工作机制,并应用于钢框架结构进行了静力弹塑性分析。通过ABAQUS有限元软件建立了5个工况的数值分析模型,进行了有限元模型的循环往复位移荷载分析,探究了新型摩擦"塑性铰"构造的抗震性能。结果表明:该构造模型仅发生了抗剪螺栓的剪切破坏,可实现其精准耗能和结构的快速修复;具有较好的转动性能,满足层间位移角要求;摩擦耗能随着旋转加载螺栓预应力和摩擦系数的增大而增大,其滞回曲线较饱满,延性系数较大,具有较好的抗震性能;理论分析和有限元分析的承载力基本吻合,分别为15.92 kN、15.84 kN;抗剪螺栓的剪切和纯摩擦耗能两阶段的等效粘滞阻尼系数分别为0.318、0.671,纯摩擦耗能阶段的耗能能力较好。在钢框架中摩擦"塑性铰"的形成与发展符合抗震性能要求,Pushover分析可作为结构抗震性能评估的有效方式。 相似文献
15.
针对平面不规则RC框架结构,从构件安全层次出发提出基于传力路径的减震设计方法。首先根据广义结构刚度法的基本原理计算结构中所有构件的重要性系数,再假定消能支撑的截面参数,取每层最重要的构件位置布置支撑,经支撑在最不利地震组合下的轴力验算后确定支撑的最终设计参数和数量,然后考虑远场、近场有脉冲以及近场无脉冲地震动从双向输入对结构响应的影响,对减震前、后结构分别进行动力时程分析。分析结果表明,利用此方法优化布置支撑能为结构中重要构件提供有效保护,且在小、中、大震下消能支撑均能运作良好,使整体结构响应得到很好地控制。 相似文献
16.
17.
By advancing the technologies regarding seismic control of structures and development of earthquake resistance systems in the past decades application of different types of earthquake energy dissipation system has incredibly increased. Viscous damper device as a famous and the simplest earthquake energy dissipation system is implemented in many new structures and numerous number of researches have been done on the performance of viscous dampers in structures subjected to earthquake. The experience of recent severe earthquakes indicates that sometimes the earthquake energy dissipation devices are damaged during earthquakes and there is no function for structural control system. So, damage of earthquake energy dissipation systems such as viscous damper device must be considered during design of earthquake resistance structures.This paper demonstrates the development of three-dimensional elasto-plastic viscous damper element consisting of elastic damper in the middle part and two plastic hinges at both ends of the element which are compatible with the constitutive model to reinforce concrete structures and are capable to detect failure and damage in viscous damper device connections during earthquake excitation. The finite element model consists of reinforced concrete frame element and viscous damper element is developed and special finite element algorithm using Newmark׳s direct step-by-step integration is developed for inelastic dynamic analysis of structure with supplementary elasto-plastic viscous damper element. So based on all the developed components an especial finite computer program has been codified for “Nonlinear Analysis of Reinforced Concrete Buildings with Earthquake Energy Dissipation System”. The evaluation of seismic response of structure and damage detection in structural members and damper device was carried out by 3D modeling, of 3 story reinforced concrete frame building under earthquake multi-support excitation. 相似文献
18.
The study of the torsional response of buildings in the inelastic range of behaviour is of great interest since the ability of structures to resist strong earthquakes mainly relies on their ductility and capacity for energy dissipation. Furthermore, an examination of the performance of structures during past earthquakes demonstrates that plan-asymmetric buildings suffered greater damage due to torsional response. The paper deals with this subject by analysing a model which idealizes a one-storey building with resisting elements oriented along two perpendicular directions. In addition to the parameters of the elastic behaviour, the inelastic system response depends on full yield capacity and plan-wise strength distribution. The influence of the criterion adopted for the design of resisting elements on local ductility demand and damage has been evaluated by parametric analysis. In particular, a comparison has been carried out between systems with equal design levels for all elements and systems with design levels dependent on the element location. For a given elastic behaviour and total capacity, the strength distributions in plan have been defined which minimize ductility demand and structural damage. Finally, based on these findings, responses from models designed according to several seismic codes have been compared. 相似文献
19.
Shaking table test and numerical simulation of a 1/2‐scale self‐centering reinforced concrete frame 
下载免费PDF全文
下载免费PDF全文 Self‐centering reinforced concrete frames are developed as an alternative of traditional seismic force‐resisting systems with better seismic performance and re‐centering capability. This paper presents an experimental and computational study on the seismic performance of self‐centering reinforced concrete frames. A 1/2‐scale model of a two‐story self‐centering reinforced concrete frame model was designed and tested on the shaking table in State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University to evaluate the seismic behavior of the structure. A structural analysis model, including detailed modeling of beam–column joints, column–base joints, and prestressed tendons, was constructed in the nonlinear dynamic modeling software OpenSEES. Agreements between test results and numerical solutions indicate that the designed reinforced concrete frame has satisfactory seismic performance and self‐centering capacity subjected to earthquakes; the self‐centering structures can undergo large rocking with minor residual displacement after the earthquake excitations; the proposed analysis procedure can be applied in simulating the seismic performance of self‐centering reinforced concrete frames. To achieve a more comprehensive evaluation on the performance of self‐centering structures, research on energy dissipation devices in the system is expected. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
Resat Oyguc 《Bulletin of Earthquake Engineering》2016,14(3):821-847
School buildings have been classified by many of the design codes as important buildings, which have to withstand the earthquake excitations without any or with minor structural damages, and special care has to be given in their design and construction phases. This paper mainly aims to investigate the seismic performance of reinforced-concrete (RC) school buildings after 2011 Van earthquakes. The seismic performances of two damaged RC school buildings located in the earthquake-affected region are studied. First, the capacities of the selected buildings are assessed using nonlinear static procedures, and then, nonlinear dynamic time history analyses are performed to evaluate the seismic performances of the selected RC school buildings. Reasons for the observed damages are discussed. Further, recommendations are provided from the viewpoint of enhancing the structural capacity of the heavily damaged school building. As a result, to get an idea about the ductility demands imposed on the buildings, spectral acceleration values are compared with the seismic coefficients of the code that the buildings were adapted to. It can be concluded that the construction quality and detailing of the reinforcement are the key issues affecting the seismic performance of RC school buildings. 相似文献