共查询到20条相似文献，搜索用时 15 毫秒
1.
Sediment movement in the wave boundary layer above a mobile sediment bed is complex.A velocity formula for the boundary layer is proposed for sheet flow induced by asymmetric waves above a mobile sediment bed.The formula consists of a free stream velocity and a defect function which contains a phase-lead,boundary layer thickness and mobile sediment bed.Phase-lag of sediment movement is considered in the formula for the mobile sediment bed.The formula needs six dependent variables about asymmetric wave and sediment characteristics.Asymmetry effects on parameters(orbital amplitude,roughness height,bed shear stress,and boundary layer thickness)are properly considered such that the formula can yield velocity differences among onshore,offshore,acceleration,and deceleration stages.The formula estimates the net boundary layer velocity resulting from the mobile sediment bed and asymmetric boundary layer thickness.In addition,a non-constant phase-lead also contributes to the net boundary layer velocity in asymmetric oscillatory sheet flow.Results of the formula are as good as that of a two-phase numerical model.Sheet flow transport induced by asymmetric waves,and the offshore net sediment transport rate with a large phase-lag under velocity-skewed waves,can be adequately estimated by the formula with a power sediment concentration function. 相似文献
2.
A velocity formula is proposed for flow over a mobile sediment bed induced by velocity-skewed waves and current. The formula is obtained by a separation of waves and current velocities and requires seven free variables related to free stream velocity and sediment characteristics. The formula includes two parts:(1) a wave part consisting of the free stream velocity and defect function, which considers phase lead, wave boundary layer thickness, and mobile bed level, and(2) a current part, which ch... 相似文献
3.
Wave-induced, steep vortex ripples are ubiquitous features in shallow coastal seas and it is therefore important to fully understand and model the sediment transport processes that occur over them. To this end, two two-dimensional vertical (2DV) models have been critically tested against detailed velocity and sediment concentration measurements above mobile ripples in regular asymmetric oscillatory flow. The two models are a k–ω turbulence-closure model and a discrete-vortex, particle-tracking (DVPT) model, while the data are obtained in the Aberdeen oscillatory flow tunnel (AOFT). The models and the data demonstrate that the time-dependent velocity and suspended sediment concentration above the ripple are dominated by the generation of lee-side vortices and their subsequent ejection at flow reversal. The DVPT model predicts the positions and strengths of the vortices reasonably well, but tends to overpredict the velocity close to the ripple surface. The k–ω model, on the other hand, underpredicts the height to which the vortices are lifted, but is better able to predict the velocity close to the bed. In terms of the cycle- and ripple-averaged horizontal velocity, both models are able to reproduce the observed offshore flow close to and below the ripple crest and the DVPT model is able to produce the onshore flow higher up. In the vicinity of the vortices, the DVPT model better represents the concentration (because of its better prediction of vorticity). The k–ω model, on the other hand, better represents the concentration close to the ripple surface and higher up in the flow (because of the better representation of the near-bed flow and background turbulence). The measured and predicted cycle- and ripple-averaged suspended sediment concentrations are in reasonable agreement and demonstrate the expected region of exponential decay. The models are able to reproduce the observed offshore cycle- and ripple-averaged suspended sediment flux from the ripple troughs upwards, and as a result, produce net offshore suspended sediment transport rates that are in reasonable agreement. The net measured offshore suspended transport rate, based on the integration of fluxes, was found to be consistent with the total net offshore transport measured in the tunnel as a whole once the onshore transport resulting from ripple migration was taken into account, as would be expected. This demonstrates the importance of models being able to predict ripple-migration rates. However, at present neither of the models is able to do so. 相似文献
4.
5.
DEPTH-AVERAGE ANALYSIS OF HYSTERESIS BETWEEN FLOW AND SEDIMENT TRANSPORT UNDER UNSTEADY CONDITIONS 总被引：1，自引：0，他引：1
Weiming WU Mustafa ALTINAKAR Sam S. Y. WANG 《国际泥沙研究》2006,21(2):101-112
1 INTRODUCTION Flow and sediment transport in natural rivers are generally unsteady, and exhibit temporal and spatial lags. Traditionally, in most hydraulic engineering problems the unsteady flow and sediment transport are approximately treated as steady … 相似文献
6.
Shu Gao 《Continental Shelf Research》2009,29(16):1927-1936
A forward modeling approach is proposed to simulate the preservation potential of tidal flat deposits. The preservation potential is expressed as a function of net deposition rate and a factor that represents the vertical flux of suspended load, or seabed lowering during erosion periods associated with bedload transport. The model takes into account a number of geometric parameters of a tidal flat sediment system and sediment dynamic processes. The former includes high water level, total sediment supply, the annual rate of the supply, the ratio of mud to bilk sediment in the supply, the bed slope of the tidal flat profile, as well as the slope of the stratigraphic boundary; the latter includes spring-neap cycles of tidal water level changes, boundary layer processes, resuspension of fine-grained sediments, bedload transport due to tidal currents, and bed elevation changes in response to sediment movement. Using this model, numerical experiments are carried out for a tidal flat system on the Jiangsu coast, eastern China, with the input data being derived from literature and from a series of sediment cores collected along an onshore–offshore transect. The results show that the preservation potential is highest over the upper part of the inter-tidal zone and in the lower part of the sub-tidal zone, and lowest near mean sea level and at low water on springs. The preservation potential tends to decrease with the advancement of the shoreline. The bed slope, tidal current direction and resuspension intensity influence the spatial distributions of the preservation potential. An implication of these results is that the temporal resolution of the tidal flat record depends upon the location and depth within the deposit; this should be taken into account in the interpretation of sedimentary records. Further studies are required to improve the model, on the hydrodynamic processes associated with extremely shallow water depths, sediment dynamic modeling of bed slope and profile shape, and the combined action of tides and waves for sediment transport on tidal flats. 相似文献
7.
Sediment transport models require appropriate representation of near-bed processes. We aim here to explore the parameterizations of bed shear stress, bed load transport rate and near-bed sediment erosion rate under the sheet flow regime. To that end, we employ a one-dimensional two-phase sheet flow model which is able to resolve the intrawave boundary layer and sediment dynamics at a length scale on the order of the sediment grain. We have conducted 79 numerical simulations to cover a range of collinear wave and current conditions and sediment diameters in the range 210–460 μm. The numerical results confirm that the intrawave bed shear stress leads the free stream velocity, and we assess an explicit expression relating the phase lead to the maximum velocity, wave period and bed roughness. The numerical sheet flow model is also used to provide estimates for the bed load transport rate and to inspect the near-bed sediment erosion. A common bed load transport rate formulation and two typical reference concentration approaches are assessed. A dependence of the bed load transport rate on the sediment grain diameter is observed and parameterized. Finally, the intrawave near-bed vertical sediment flux is further investigated and related to the time derivative of the bed shear stress. 相似文献
8.
The Eulerian residual transport velocity and the first-order Lagrangian residual velocity for weakly nonlinear systems have been used extensively in the past to depict inter-tidal mass transport. However, these could not explain the observed net surface sediment transport pattern in Jiaozhou Bay (JZB), located on the western Yellow Sea. JZB is characterized by strong tidal motion, complex topography and an irregular coastline, which are features of typical nonlinear systems. The Lagrangian residual velocity, which is applicable to general nonlinear systems, was simulated with the water parcel tracking method. The results indicate that the composition of the Lagrangian residual velocity at different tidal phases coincides well with the observed net surface sediment transport pattern. The strong dependence of water flushing time on the initial tidal phase can also be explained by the significant intra-tidal variation of the Lagrangian residual velocity. To investigate the hydrodynamic mechanism governing the nonlinearity of the M 2 tidal system, a set of nonlinearity indexes were defined and analysed. In the surface layer, horizontal advection is the main contributor to the strong nonlinearity near the bay mouth, while in the bottom layer, the strong nonlinearity near the bay mouth may result from the vertical viscosity and horizontal advection.
相似文献9.
This numerical investigation was carried out to advance mechanistic understanding of sediment transport under sheet flow conditions. An Euler–Euler coupled two-phase flow model was developed to simulate fluid–sediment oscillatory sheet flow. Since the concentration of sediment particles is high in such flows, the kinematics of the fluid and sediment phases are strongly coupled. This model includes interaction forces, intergranular stresses and turbulent stress closure. Each phase was modeled via the Reynolds-Averaged Navier–Stokes equations, with interphase momentum conservation accounting for the interaction between the phases. The generation and transformation of turbulence was modeled using the two-equation k–ε turbulence model. Concentration and sediment flux profiles were compared with experimental data for sheet flow conditions considering both symmetric and asymmetric oscillatory flows. Sediment and fluid velocity variations, concentration profiles, sediment flux and turbulence parameters of wave-generated sheet flow were studied numerically with a focus on sediment transport characteristics. In all applications, the model predictions compared well with the experimental data. Unlike previous investigations in which the flow is driven by a horizontal pressure gradient, the present model solves the Navier–Stokes equations under propagating waves. The model’s ability to predict sediment transport under oscillatory sheet flow conditions underscores its potential for understanding the evolution of beach morphology. 相似文献
10.
David Pritchard 《Ocean Dynamics》2005,55(2):124-136
We present semi-analytical solutions for suspended sediment concentration (SSC) and residual sediment transport in a simple
mathematical model of a short tidal embayment. These solutions allow us to investigate in some detail the characteristic tidal
and semi-tidal variation of SSC and the processes leading to residual sediment transport, including settling and scour lags,
the roles of ‘local’ and ‘advective’ contributions, and the presence of internally or externally generated overtides. By interpreting
the transport mechanisms in terms of the classic conceptual models of settling lag we clarify how these models may be expressed
in mathematical terms. Our results suggest that settling lag is usually a more important process than scour lag, and that
a local model which neglects advection may predict the direction of net sediment transport incorrectly. Finally, we discuss
our results in the context of other transport processes and morphodynamic feedback. 相似文献
11.
Hydraulic engineering is usually based on theoretical analysis and/or numerical modelling simulation. As the dynamic behaviour of sediment movement under unsteady flow is still unclear, and field measurement is comparatively difficult during a large flood, prior investigations through flume experiments are required. A series of flume experiments, conducted using different inflow hydrographs without sediment supply from upstream, was carried out to investigate the sediment transport process under unsteady flow conditions. A series of triangular hydrographs were performed in the experiments. The results indicate that a temporal lag was found between the flow hydrograph peak and the sediment hydrograph peak because large size sand dunes lasted for a short period in the falling limb of the flow hydrograph. The temporal lag was found to be about equal to 6–15% of the flow hydrograph duration. Owing to the temporal lag, the total bedload yield in the rising period was less than that in the falling period. Furthermore, the measured total bedload yield in the unsteady flow experiments was larger than the predicted value, which was estimated by using the results obtained from the equivalent steady flow experiment. The peak bedload transport rate for unsteady flow conditions was also larger than the predicted value. The ratios of the measured to the predicted quantities mentioned above were found to be constant values for different shapes of hydrographs. It is, therefore, expected that the analytical results of sediment transport from equivalent steady flow can be a good reference for sediment transport under unsteady flow conditions. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
12.
Tide-induced vertical suspended sediment concentration profiles: phase lag and amplitude attenuation
In tidal environments, the response of suspended sediment concentration (SSC) to the current velocity is not instantaneous,
the SSC lagging behind the velocity (phase lag), and the amplitude of SSC variation decreasing with height above the bed (amplitude
attenuation). In order to quantitatively describe this phenomenon, a one-dimensional vertical advection–diffusion equation
of SSC is derived analytically for uniform unsteady tidal flow by defining a concentration boundary condition using a constant
vertical eddy diffusivity and sediment settling velocity. The solution, in simple and straightforward terms, shows that the
vertical phase lag increases linearly with the height above the bed, while the amplitude of the SSC variation decreases exponentially
with the height. The relationship between the SSC and the normalized current velocity can be represented by an ellipse or
a line, depending on the phase lag. The lag of sediment movement or “diffusion/settling lag” is the mechanism generating the
phase lag effect. Field observations used for validation show that the theoretically predicted and the observed curves of
the vertical SSC phase lag and amplitude attenuation show reasonable agreement. The procedure proposed in this paper substantially
simplifies the modeling of suspended matter transport in tidal flows. 相似文献
13.
Grass buffer strips impact the hydrology of flow and consequently the fate of sediment. A complex process‐based model is developed to predict flow characteristics as well as sediment deposition and transport upstream, and within grass strips. The model is capable of estimating the proportion and amount of different sediment particle size classes in the outflow. The modified Green–Ampt equation was used to simulate infiltration. Gradually varied flow and kinematic wave approximation were used to model flow characteristics upstream and within grass strips. The GUEST model approach has been modified in order to use its basic approaches in sediment transport module in grass strips. Model predictions agree well with the results of two sets of controlled experiments. The bias, coefficient of model efficiency and the root mean squared error of the modelled efficiency of grass strips in reducing sediment concentration were 0.93–0.99, 0.58–0.99 and 8.9–12.7, respectively. The sensitivity analysis showed that the initial soil moisture and flow rate are the most sensitive parameters in predicting runoff loss. Increasing the slope steepness and flow rate dramatically decreases the efficiency of grass strips in reducing sediment concentration and mass. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
R. P. C. Morgan 《地球表面变化过程与地形》1980,5(4):307-316
Field studies on sandy soils of the Cottenham Series in mid-Bedfordshire show that the mean annual rate of sediment transport by overland flow on an 11° mid-slope is 98 g cm1. The feasibility of using sediment transport equations to predict erosion by overland flow on a storm basis is examined by comparing the observed values of sediment yield with values predicted by four sediment transport equations and a regression equation which relates soil loss to runoff energy and rainfall energy. An expression combining Engelund's sediment transport capacity equation and the Manning equation for flow velocity, as modified by Savat for disturbed flow, best reflects field conditions. Although there is a significant correlation (r = 0.69; n 30) between the observed and predicted values using this expression, the coefficient of determination is too low for predictive purposes. Reasons for this are presented. 相似文献
15.
J. Hardisty 《地球表面变化过程与地形》1989,14(2):107-118
Although the near-bed, wave induced currents predicted by the various wave theories are responsible for seabed sediment transport, it is presently unclear which theory should be included in coastal geomorphic models. The theoretical expressions for near-bed, shorenormal flows are re-examined and the predictions are tested with morphodynamic and laboratory data. Five wave theories (Airy, Stokes, Cnoidal, Solitary, and Gerstner) are summarized here and arranged to predict the maximum onshore and offshore near-bed flows and the flow asymmetry as functions of the wave period, the wave height, and the water depth. Morphodynamic argument suggests that only Stokes and Cnoidal wave theories predict the asymmetry required to generate prototype seabed profiles in intermediate water depths. Laboratory measurements of wave induced near-bed flows are then reported and analysed. The results suggest that Stokes wave theory over-predicts the observed peak flows. A correction is derived which is shown to be analogous to the pressure attenuation corrections which are routinely applied to wave recording, seabed mounted transducer measurements. 相似文献
16.
Numerical simulations of tidal flow and sand transport around a coastal headland (Portland Bill, southern UK) were undertaken to investigate patterns of sand transport during the development of tidally induced transient eddies. Results obtained from a 2-D finite-element hydrodynamic model (TELEMAC-2D) were combined with a sediment transport model (SEDTRANS), to simulate the sand transport processes around the headland. Simulation of the tidal flow around Portland Bill has shown the formation and evolution of tidally induced transient eddies, around the headland. During the evolution of these transient eddies, no current-induced bedload (transport) eddy is formed for either side of the headland. Net bedload sand transport direction, around a coastal headland, is the result of instantaneous gradients in bedload transport rates, during flood and ebb flows, rather than the average (residual) flow. Thus, the use of residual (water) circulation to describe patterns of sediment movement as bedload is not an appropriatedapproach. In the case study presented here, the distinct characteristics of the coastal and seabed morphology around the Isle of Portland (i.e. headland shape and the bathymetry) indicate that these parameters can be influencing tidal (flow) and sediment dispersion around the headland. Such an interpretation has broader implications and applications to headland-associated sandbanks elsewhere.Responsible Editor: Hans Burchard 相似文献
17.
Costanza Di Stefano Alessio Nicosia Vincenzo Palmeri Vincenzo Pampalone Vito Ferro 《水文研究》2019,33(26):3330-3348
Rills caused by run‐off concentration on erodible hillslopes have very irregular profiles and cross‐section shapes. Rill erosion directly depends on the hydraulics of flow in the rills, which may differ greatly from hydraulics of flow in larger and regular channels. In this paper, a recently theoretically deduced rill flow resistance equation, based on a power–velocity profile, was tested experimentally on plots of varying slopes (ranging from 9% to 26%) in which mobile and fixed bed rills were incised. Initially, measurements of flow velocity, water depth, cross‐section area, wetted perimeter, and bed slope, carried out in 320 reaches of mobile bed rills and in 165 reaches of fixed rills, were used for calibrating the theoretical flow resistance equation. Then the relationship between the velocity profile parameter Γ, the channel slope, and the flow Froude number was separately calibrated for the mobile bed rills and for the fixed ones. The measurements carried out in both conditions (fixed and mobile bed rills) confirmed that the Darcy–Weisbach friction factor can be accurately estimated using the proposed theoretical approach. For mobile bed rills, the data were supportive of the slope independence hypothesis of velocity, due to the feedback mechanism, stated by Govers. The feedback mechanism was able to produce quasicritical flow conditions. For fixed bed rills, obtained by fixing the rill channel, by a glue, at the end of the experimental run with a mobile bed rill, the slope independence of the flow velocity measurements was also detected. Therefore, an experimental run carried out by a rill bed fixed after modelling flow action is useful to detect the feedback mechanism. Finally, the analysis showed that, for the investigated conditions, the effect of sediment transport on the flow resistance law can be considered negligible respect to the grain roughness effect. 相似文献
18.
Shallow sediment transport flow computation using time-varying sediment adaptation length 总被引：1，自引：0，他引：1
Based on the common approach,the adaptation length in sediment transport is normally estimated astemporally independent.However,this approach might not be theoretically justified as the process of reaching the sediment transport equilibrium stage is affected by the flow conditions in time,especially for fast moving flows,such as scour-hole developing flows.In this study,the two-dimensional（2D） shallow water formulation together with a sediment continuity-concentration（SCC） model were applied to flow with mobile sediment boundary.A timevarying approach was proposed to determine the sediment transport adaptation length to simulate the sediment erosion-deposition rate.The proposed computational model was based on the Finite Volume（FV） method.The Monotone Upwind Scheme of Conservative Laws（MUSCL）-Hancock scheme was used with the Harten Lax van Leer-contact（HLLC） approximate Riemann solver to discretize the FV model.In the flow applications of this paper,a highly discontinuous dam-break,fast sediment transport flow was used to calibrate the proposed timevarying sediment adaptation length model.Then the calibrated model was further applied to two separate experimental sediment transport flow applications documented in the literature,i.e.a highly concentrated sediment transport flow in a wide alluvial channel and a sediment aggradation flow.Good agreement with the experimental data were obtained with the proposed model simulations.The tests prove that the proposed model,which was calibrated by the discontinuous dam-break bed scouring flow,also performed well to represent rapid bed change and steady sediment mobility conditions. 相似文献
19.
Retrogressive erosion is a high-speed erosion process that usually occurs during the rapid release of stored water in reservoirs built on sandy rivers.Retrogressive erosion has been utilized in the practice of reservoir sedimentation control,but accurate prediction of the bed deformation process by numerical models has rarely been reported.The current study presents a one-dimensional morphodynamic model for simulating the evolution process of retrogressive erosion induced by high-velocity flows on steep slopes.The governing equations apply a Cartesian coordinate system with a vertically oriented z axis.The bed surface gradient and friction terms in the flow equations include correction factors to take account of the effects of high slope on flow movement.The net vertical sediment flux term in the sediment transport and bed deformation equations is calculated using an equation of erosion velocity.Particularly,this equation is based on an empirical relation between the sediment entrainment rate and the Shields parameter in contrast to the traditional sediment transport capacity,and the critical Shields parameter is modified by taking into account the permeability of the sediment layer and the stability of particles on a slope.The feedback of scoured sediment on the flow movement is considered by additional terms in the governing equations.Flume experiments of retrogressive erosion in literature were simulated to validate the model.The temporal variations of the longitudinal profiles of the free surface and channel bed and the sediment transport rate were well predicted.The algorithm calculating sediment entrainment in the proposed model also was validated for an experiment measuring entrainment rate from the literature.More importantly,it was found that the morphodynamic model using the sediment transport capacity equation predicts the trend of cumulative erosion contrary to the measurements,while results of the proposed model can follow a similar trend with the observed data in the retrogressive erosion process. 相似文献
20.
《国际泥沙研究》2020,35(2):193-202
The current work focuses on locally resolving velocities,turbulence,and shear stresses over a rough bed with locally non-uniform character.A nonporous subsurface layer and fixed interfacial sublayer of gravel and sand were water-worked to a nature-like bed form and additionally sealed in a hydraulic flume.Two-dimensional Particle Image Velocimetry(2 D-PIV) was applied in the vertical plane of the experimental flume axis.Runs with clear water and weak sediment transport were done under slightly supercritical flow to ensure sediment transport conditions without formation of considerable sediment deposits or dunes.The study design included analyzing the double-averaged flow parameters of the entire measurement domain and investigating the flow development at 14 consecutive vertical subsections.Local geometrical variabilities as well the presence of sediment were mainly reflected in the vertical velocity component.Whereas the vertical velocity decreased over the entire depth in presence of sediment transport,the streamwise velocity profile was reduced only within the interfacial sublayer.In the region with decelerating flow conditions,however,the streamwise velocity profile systematically increased along the entire depth extent.The increase in the main velocity(reduction of flow resistance)correlated with a decrease of the turbulent shear and main normal stresses.Therefore,effects of rough bed smoothening and drag force reduction were experimentally documented within the interfacial sublayer due to mobile sediment.Moreover,the current study leads to the conclusion that in nonuniform flows the maximum Reynolds stress values are a better predictor for the bed shear stress than the linearly extrapolated Reynolds stress profile.This is an important finding because,in natural flows,uniform conditions are rare. 相似文献