共查询到20条相似文献，搜索用时 296 毫秒
1.
A one-dimensional constitutive model, developed for the nonlinear ground response analysis of layered soil deposits, is calibrated and validated experimentally in this paper. The small number of parameters renders the model easily implementable, yet quite flexible in effectively reproducing almost any type of experimentally observed hysteretic soil behavior. In particular, the model generates realistic shear modulus and damping curves as functions of shear strain, as well as stress–strain hysteresis loops. The model is calibrated against three sets of widely-used published shear modulus and damping (G : γ and ξ : γ) curves and a library of parameter values is assembled to facilitate its use. The model, along with a developed explicit finite-difference code, NL-DYAS, for analyzing the wave propagation in layered hysteretic soil deposits, is tested against established constitutive models and numerical tools such as Cyclic1D [12] and SHAKE [42], and validated against experimental data from two centrifuge tests. Emphasis is given on the proper assessment of the Vs profile in the centrifuge tests, on the role of soil nonlinearity, and on comparisons of two inelastic codes (NL-DYAS and Cyclic1D) with equivalent linear (SHAKE) analysis. 相似文献
2.
The present study aims to obtain p-y curves(Winkler spring properties for lateral pile-soil interaction) for liquefied soil from 12 comprehensive centrifuge test cases where pile groups were embedded in liquefiable soil. The p-y curve for fully liquefied soil is back-calculated from the dynamic centrifuge test data using a numerical procedure from the recorded soil response and strain records from the instrumented pile. The p-y curves were obtained for two ground conditions:(a) lateral spreading of liquefied soil, and(b) liquefied soil in level ground. These ground conditions are simulated in the model by having collapsing and non-collapsing intermittent boundaries, which are modelled as quay walls. The p-y curves back-calculated from the centrifuge tests are compared with representative reduced API p-y curves for liquefied soils(known as p-multiplier). The response of p-y curves at full liquefaction is presented and critical observations of lateral pile-soil interaction are discussed. Based on the results of these model tests, guidance for the construction of p-y curves for use in engineering practice is also provided. 相似文献
3.
Lateral spreads are complex dynamic phenomena that are challenging to represent numerically. In this paper numerical models are developed and calibrated using the displacement, acceleration, and pore water pressure time histories recorded in a free-field lateral spreading centrifuge test. The calibrated numerical model then is used to predict another free-field lateral spreading centrifuge test using the same soil profile but different input acceleration time history. The computed response shows good agreement with the centrifuge test measurements. This paper demonstrates that even in a large strain problem, such as lateral spreading, small strain damping plays an important role in numerical simulation results; it also shows the need to have pressure dependent dilation parameters in the employed soil constitutive model implemented in order to simultaneously reproduce measurements of pore water pressure, acceleration and lateral displacement. 相似文献
4.
Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations. 相似文献
5.
Understanding the soil–structure interaction (SSI) mechanism is crucial in the seismic design of nuclear power plant (NPP) containment systems. Although the numerical analysis method is generally used in seismic design, there is a need for experimental verification for the reliable estimation of SSI behavior. In this study a dynamic centrifuge test was performed to simulate the SSI behavior of a Hualien large-scale seismic test (LSST) during the Chi-Chi earthquake. To simulate the soil profile and dynamic soil properties of the Hualien site, a series of resonant column (RC) tests was performed to determine the model soil preparation conditions, such as the compaction density and the ratio of soil–gravel contents. The variations in the shear wave velocity (VS) profiles of the sand, gravel, and backfill layers in the model were estimated using the RC test results. During the centrifuge test, the VS profiles of the model were evaluated using in-flight bender element tests and compared with the in-situ VS profile at Hualien. The containment building model was modeled using aluminum and the proper scaling laws. A series of dynamic centrifuge tests was performed with a 1/50 scale model using the base motion recorded during the Chi-Chi-earthquake. In the soil layer and foundation level, the centrifuge test results were similar to the LSST data in both the time and frequency domains, but there were differences in the structure owing to the complex structural response as well as the material damping difference between the concrete in the prototype and aluminum in the model. In addition, as the input base motion amplitude was increased to a maximum value of 0.4g (prototype scale), the responses of the soil and containment model were measured. This study shows the potential of utilizing dynamic centrifuge tests as an experimental modeling tool for site specific SSI analyses of soil–foundation–NPP containment system. 相似文献
6.
A two-dimensional (2D) finite element analytical model is developed to analyze the seismic response of rigid highway bridge abutments, retaining and founded on dry sand. A well verified finite element code named FLEX is used for this purpose. The proposed model has the following characteristics: (1) The soil (dry sand in this study) is modeled by a 2D finite element grid; (2) The bridge abutment is molded as a rigid substructure; (3) The strength and deformation of the soil are modeled using the viscous cap constitutive model. This model consists of a failure surface and hardening cap together with an associated flow rule. The cap surface is activated for the soil under the wall to represent compaction during wall rocking. In addition, viscoelastic behavior is provided for representing the hysteretic-like damping of soil during dynamic loading; (4) Interface elements are used between the wall and the soil (at the backface of the wall and under its base) to allow for sliding and for debonding/recontact behavior; (5) The finite element grid is truncated by using an absorbing boundary approximation. Using this boundary at both sides of the grid simulates the horizontal radiation of energy scattered from the wall and the excavation. Shear beams are placed adjacent to the lateral boundaries from each side which give the far-field ground motion, for comparison with those computed adjacent to the boundaries. The analytical model is verified comparing predictions to results from dynamic centrifuge tests, with satisfactory agreement. The proposed model is used to study the dynamic response of an 8.0 m high and 3.0 m wide rigid bridge abutment (proportioned using the traditional approach to design) for different sinusoidal and earthquake acceleration input motions. The results from the analysis show that outward tilting of rigid bridge abutments is the dominant mode of response during dynamic shaking and that these abutments end up with a permanent outward tilt at the end of shaking. The results from all the analyzed cases of the 8.0 m high gravity retaining wall together with those from the analysis of the tilting wall centrifuge tests are discussed and used for proposing a practical method for evaluating the seismic response of rigid abutments during earthquakes. 相似文献
7.
This paper outlines the results of an experimental program carried out on centrifuge models of cantilevered and propped retaining walls embedded in saturated sand. The main aim of the paper is to investigate the dynamic response of these structures when the foundation soil is saturated by measuring the accelerations and pore pressures in the soil, displacements and bending moment of the walls. A comparison among tests with different geometrical configurations and relative density of the soil is presented. The centrifuge models were subjected to dynamic loading in the form of sinusoidal accelerations applied at the base of the models. This paper also presents data from pressure sensors used to measure total earth pressure on the walls. Furthermore, these results are compared with previous dynamic centrifuge tests on flexible retaining walls in dry sand. 相似文献
8.
This paper presents a centrifuge model that is capable of realistically representing soil-structure systems subjected to earthquake-like excitation. The model is validated by performing (i) free field soil tests, (ii) dynamic soil-structure interaction tests and (iii) a numerical analysis of the experimental results. The free field experiments show that the simulated earthquake, which is generated by the hammer-exciter plate method, is similar in amplitude and frequency content to a real earthquake. The experiments also demonstrate that a confined soil sample can satisfactorily model a horizontal soil stratum of infinite lateral extent when the containment walls are lined with an absorptive material to attenuate wave reflections that would otherwise occur. Measurements of the acceleration at different locations on the free soil surface indicate that the surface motion is fairly uniform over a relatively large area. This is further confirmed by a comparison made between the measured free and scattered field motions for a surface foundation. Next, a series of soil-structure interaction tests are performed which examine the dependence of radiation damping on the natural frequencies of the structure relative to the fundamental frequency of the soil stratum. The experimental results are shown to be consistent with established theories. Finally, the experimental results are used to compute the stiffness and damping parameters of a two degree of freedom numerical model of the soil-structure system. The experimental parameters are shown to be in good agreement with calssical text book formulae. This study demonstrates that the centrifuge model consistently behaves as expected for simple, but realistic, dynamic soil and soil-structure systems, and can, therefore, be used with confidence to examine more complicated systems that are not yet fully understood. 相似文献
9.
Konstantinos I. Andrianopoulos Achilleas G. Papadimitriou George D. Bouckovalas 《Soil Dynamics and Earthquake Engineering》2010
This paper presents the constitutive relations and the simulative potential of a new plasticity model developed mainly for the seismic liquefaction analysis of geostructures. The model incorporates the framework of critical state soil mechanics, while it relies on bounding surface plasticity with a vanished elastic region to simulate the non-linear soil response. Key constitutive ingredients of the new model are: (a) the inter-dependence of the critical state, the bounding and the dilatancy (open cone) surfaces on the basis of the state parameter ψ, (b) a (Ramberg–Osgood type) non-linear hysteretic formulation for the “elastic” strain rate, (c) a discontinuously relocatable stress projection center related to the “last” load reversal point, which is used for mapping the current stress point on model surfaces and as a reference point for introducing non-linearity in the “elastic” strain rate and finally (d) an empirical index of the directional effect of sand fabric evolution during shearing, which scales the plastic modulus. In addition, the paper outlines the calibration procedure for the model constants, and exhibits its accuracy on the basis of a large number of laboratory element tests on Nevada sand. More importantly, the paper explores the potential of the new model by presenting simulations of the VELACS centrifuge tests of Models No 1 and 12, which refer to the free-field liquefaction response of Nevada sand and the seismic response of a rigid foundation on the same sand, respectively. These simulations show that the new model can be used successfully for the analysis of widely different boundary value problems involving earthquake soil liquefaction, with the same set of model constants calibrated on the basis of laboratory element tests. 相似文献
10.
When designing buried structures using a performance-based framework, it is important to estimate their uplift displacement. A simplified method is proposed for predicting the uplift displacement of a hollow cylinder structure buried in shallow backfill based on the equilibrium of vertical forces acting on the structure during earthquakes. However, this method only provides the maximum value, which frequently is overestimated in practical applications. To offset this limitation, first, the uplift behavior of buried hollow cylinder structures subjected to strong earthquake motions was simulated. Then, two-dimensional effective stress analyses based on the multiple shear mechanism for soil were conducted, and the results were compared with the centrifuge test data. The soil parameters were evaluated based on laboratory test results. The seismic response data from 20 g centrifuge tests were analyzed, and the results were generally consistent with the results of centrifuge model tests. In particular, the effective stress model showed a reasonable ability to reproduce the varying degrees of uplift displacement depending on the geotechnical conditions of trench soils adjacent to the hollow cylinder structures buried in shallow ground. 相似文献
11.
Study of pore pressure variation during liquefaction using two constitutive models for sand 总被引：1，自引：0，他引：1
Numerical analyses of liquefiable sand are presented in this paper. Liquefaction phenomenon is an undrained response of saturated sandy soils when they are subjected to static or dynamic loads. A fully coupled dynamic computer code is developed to predict the liquefaction potential of a saturated sandy layer. Coupled dynamic field equations of extended Biot's theory with u–P formulation are used to determine the responses of pore fluid and soil skeleton. Generalized Newmark method is employed for integration in time. The soil behavior is modelled by two constitutive models; a critical state two-surface plasticity model, and a densification model. A class ‘B’ analysis of a centrifuge experiment is performed to simulate the dynamic response of level ground sites. The results of the numerical analyses demonstrate the capability of the critical sate two-surface plasticity model in producing pore pressures that are consistent with observations of the behavior of liquefiable sand in the centrifuge test. 相似文献
12.
In dynamic centrifuge tests, appropriate boundary conditions are required in order to simulate the seismic semi-infinite soil layer responses within the confines of a finite size model container. An ESB (equivalent shear beam) model container first designed at the University of Cambridge was built with a stack of light-weight aluminum frames separated by rubber to experimentally achieve this goal. In this paper, a significant number of dynamic centrifuge tests and the corresponding seismic response analyses were performed to evaluate the dynamic performance of a newly constructed ESB model container and to shed light on the range of testable soil conditions. In the set of conducted tests, it appears that the end walls of the ESB model container behave in accordance with the dynamic response of the soil deposit, despite a difference in the natural period depending on the relative density of the sand deposit. This is attributed to the differences in mass and stiffness of the end walls compared to those of the contained soil model. For partially filled model container, significant differences in seismic responses are observed in the end walls and in the soil deposit due to seismic interaction caused by the upper unfilled frames of the container. These findings suggest that dynamic model tests using this ESB model container should be conducted with the container completely filled. In addition, on the basis of a comparison with the seismic soil behavior inside a rigid-walled model container, it is clear that the ESB model container can provide a more representative lateral boundary configuration for dynamic site response studies. 相似文献
13.
Compaction or densification of loose saturated soils has been the most popular method of reducing earthquake related liquefaction potential. Such compaction of a foundation soil is only economical when limited in extent, leading to a case of an ‘island’ of improved ground (surrounded by unimproved ground). The behavior of the densified sand surrounded by liquefied loose sand during and following earthquakes is of great importance in order to design the compacted area rationally and optimize both safety and economy. This problem is studied herein by means of dynamic centrifuge model tests. The results of three heavily-instrumented dynamic centrifuge tests on saturated models of side-by-side loose and dense sand profiles are discussed. The test results suggest the following concerns as relates to ‘islands’ of densified soil: (1) there is a potential strength degradation in the densified zone as a result of pore pressure increase due to migration of pore fluid into the island from the adjacent loose liquefied ground; (2) there is a potential for lateral deformation (sliding) within the densified island as the surrounding loose soil liquefies. 相似文献
14.
Dynamic response of dams is significantly influenced by foundation stiffness and dam-foundation interaction. This in turn,
significantly effects the generation of hydrodynamic pressures on upstream face of a concrete dam due to inertia of reservoir
water. This paper aims at investigating the dynamic response of dams on soil foundation using dynamic centrifuge modelling
technique. From a series of centrifuge tests performed on model dams with varying stiffness and foundation conditions, significant
co-relation was observed between the dynamic response of dams and the hydrodynamic pressures developed on their upstream faces.
The vertical bearing pressures exerted by the concrete dam during shaking were measured using miniature earth pressure cells.
These reveal the dynamic changes of earth pressures and changes in rocking behaviour of the concrete dam as the earthquake
loading progresses. Pore water pressures were measured below the dam and in the free-field below the reservoir. Analysis of
this data provides insights into the cyclic shear stresses and strains generated below concrete dams during earthquakes. In
addition, the sliding and rocking movement of the dam and its settlement into the soil below are discussed. 相似文献
15.
This paper presents the results of dynamic centrifuge model tests conducted to investigate the liquefaction mechanism in non-homogeneous soil deposits. Four types of model tests were conducted: one model test involved a uniform soil deposit; one involved continuous layered soil deposit; and two involved discontinuous layered soil deposits. Non-homogeneity in the tests was incorporated by including periodically distributed discontinuous silty sand patches. It was found that more excess pore water pressure (EPWP) remains for a longer period of time in the discontinuous region in non-homogeneous soil deposits compared with the continuous layered and uniform soil deposits. The generation of pore water pressure ceases the supply of a new mass of water after seismic excitation; therefore the dissipation of EPWP becomes the dominant factor for settlement after seismic excitation. The rapid dissipation of EPWP through the discontinuous part in the non-homogeneous soil deposits manifests as a larger settlement in the discontinuous part, causing non-uniform settlements. 相似文献
16.
数值分析被广泛用于研究复杂环境下深基坑开挖变形,但本构模型及模型参数选择对计算结果合理性影响较大。比较分析多种本构模型的特点,硬化土小应变(HSS)本构模型能很好对软土场地基坑开挖引起的变形进行预测,但HSS模型参数多且取值困难。湖相沉积软土在昆明分布范围广,但针对此类土,特别是有机质含量及含水率较高的泥炭质土的HSS模型参数如何取值无相关研究。针对这些问题,对大量土工试验及取原状样进行室内试验资料进行分析,研究得到几个刚度参数间的经验取值关系,获得湖相沉积典型软土层的HSS模型参数。为检验HSS模型及相关参数取值的合理性,运用PLAXIS 2D数值分析软件,对软土场地的两个地铁基坑建立数值模型,计算在不同开挖工况下引起的基坑变形,并与实际变形监测值进行对比分析,两变形吻合较好,从而验证研究结果是合理可靠的,且研究结果对于深基坑支护设计、岩土工程研究及勘察等具有重要的参考价值。 相似文献
17.
To gain insight into the inelastic behavior of piles, the response of a vertical pile embedded in dry sand and subjected to cyclic lateral loading was studied experimentally in centrifuge tests conducted in Laboratoire Central des Ponts et Chaussées. Three types of cyclic loading were applied, two asymmetric and one symmetric with respect to the unloaded pile. An approximately square-root variation of soil stiffness with depth was obtained from indirect in-flight density measurements, laboratory tests on re... 相似文献
18.
The seismic behavior of massive geotechnical systems exhibits complex response patterns and mechanisms under severe loading conditions. Some of these mechanisms are localized in space, but nevertheless impact significantly the entire system response and ultimately its stability. A thorough monitoring and identification of the whole response of a distributed soil system commonly constitutes a significant challenge, and would generally be prohibitively expensive. This study presents a point-wise identification technique of soil-systems using the acceleration records provided by local instrument arrays. The newly developed identification algorithm consists of: (1) evaluation of strain tensor time histories using the motions recorded by a cluster of instruments (arranged in an appropriate multi-dimensional configuration), (2) estimation of the stress tensors corresponding to the evaluated strains utilizing a pre-selected class of constitutive models of soil response, (3) computation of accelerations associated with estimated stresses using the equations of motion, and (4) calibration and evaluation of an optimal model of soil response by minimizing discrepancies between recorded and computed accelerations. Computer simulations and analysis of centrifuge tests of a soil–quay wall system showed that the proposed technique provides an effective tool to identify local soil characteristics and properties. 相似文献
19.
Centrifuge modeling of seismic response of layered soft clay 总被引：1，自引：0，他引：1
Centrifuge modeling is a valuable tool used to study the response of geotechnical structures to infrequent or extreme events
such as earthquakes. A series of centrifuge model tests was conducted at 80g using an electro-hydraulic earthquake simulator mounted on the C-CORE geotechnical centrifuge to study the dynamic response
of soft soils and seismic soil–structure interaction (SSI). The acceleration records at different locations within the soil
bed and at its surface along with the settlement records at the surface were used to analyze the soft soil seismic response.
In addition, the records of acceleration at the surface of a foundation model partially embedded in the soil were used to
investigate the seismic SSI. Centrifuge data was used to evaluate the variation of shear modulus and damping ratio with shear
strain amplitude and confining pressure, and to assess their effects on site response. Site response analysis using the measured
shear wave velocity, estimated modulus reduction and damping ratio as input parameters produced good agreement with the measured
site response. A spectral analysis of the results showed that the stiffness of the soil deposits had a significant effect
on the characteristics of the input motions and the overall behavior of the structure. The peak surface acceleration measured
in the centrifuge was significantly amplified, especially for low amplitude base acceleration. The amplification of the earthquake
shaking as well as the frequency of the response spectra decreased with increasing earthquake intensity. The results clearly
demonstrate that the layering system has to be considered, and not just the average shear wave velocity, when evaluating the
local site effects. 相似文献
20.
离心模型试验常用微型土压力传感器测量地基或土与结构接触边界上的土压力。传感器使用之前应进行标定。传统的液标或气标方法不能准确反映传感器埋置过程对土体的扰动或传感器周围人为土拱边界条件形成,导致测试结果不甚理想。故针对试验条件,设计制作一套标定微型土压力传感器的方法和装置,以水、粉质黏土和福建标准砂为标定介质,考虑有无刚性靠背两种工作状态对多个传感器进行室内标定,得到标定系数。结果表明:水标未出现卸载滞后,砂标和土标均出现卸载滞后,且表现为非线性;引入滞后比R评价微型土压力传感器的滞后性,认为标定介质和传感器类型是影响滞后比的两个主要因素;传感器自身材料特性和几何特性、地基土的制备和传感器放置、加载预压和加卸载循环等对土体密实度、土体强度等的改变、工作介质和状态等对标定结果有影响。建议尽量模拟试验工作介质和工作状态,逐个标定传感器,以得到更准确的土压力测量值。 相似文献