共查询到20条相似文献，搜索用时 123 毫秒
1.
高层建筑时程分析中地震动时程选择和修改方法研究 总被引：2，自引：1，他引：1
合理的地震动时程选择与修改方法对于高层结构的抗震设计具有重要意义,有着广泛的工程应用.本文回顾了建筑抗震设计规范对于输入地震动时程的规定,通过对现有的地震动时程选择与修改方法进行分类和定性分析,挑选了两种与规范要求衔接较好的方法.结合具体算例对两种方法进行了定量分析,结果表明以安评设计谱作为选择指标,利用最小二乘法对选择的地震动时程进行修改,可以得到离散较小且符合规范要求的地震动时程,该成果能够在现行规范要求下为结构的抗震设计提供合理可靠的依据.同时,本文也对未来地震动时程选择与修改方法的研究和发展方向进行了展望,指出条件均值谱和非弹性反应谱将是该领域未来主要的研究方向. 相似文献
2.
基于欧美规范确定了坐落在深厚覆盖层上KH抽水蓄能电站上、下库场地基本运行和最大设计地震动峰值加速度、反应谱和时程等动参数。首先依据场地区域地震烈度区划图、特征周期区划图和依据场地地质地震条件选取的5条种子实测地震动确定场地基岩输入加速度时程、峰值加速度和设计反应谱,进而基于各土层地质参数和一维弹性波传播模拟程序确定覆盖层表面的平均峰值加速度、平均反应谱和5条地震动时程,对所得到的平均反应谱和峰值加速度进行光滑处理后确定可用于各建筑物结构抗震设计的地震动参数,包括覆盖层表面水平向动力响应加速度时程、峰值加速度和设计反应谱。该方法可较好地保留输入地震动的真实动力特性,如持时、相位和频率等,为我国规范中建议的确定场地地震动参数的方法提供有益的补充。 相似文献
3.
基于能力谱法的SSI体系抗震pushover分析方法 总被引：1，自引：0，他引：1
本文首先经过2次等效将土与结构相互作用的多自由度体系等效为单自由度体系,并给出了修正反应谱和等价能力谱的确定方法,进而提出了基于能力谱法考虑土与结构动力相互作用(SSI)效应的结构体系pushover分析方法(SSIPA);然后对3种不同高度考虑SSI效应的结构体系在5条地震动作用下采用本文提出的方法进行了算例分析,将结果与非线性时程分析的结果进行了比较,研究了本方法的适用性和准确性;最后,与建筑抗震设计规范的设计反应谱相结合,对9层考虑SSI效应的钢结构用本文提出的方法进行了弹塑性地震反应分析,根据我国抗震设计规范的规定进行抗震性能的评估验证了本方法的可行性。 相似文献
4.
汶川地震反应谱特征周期统计分析 总被引：1，自引：0，他引：1
反应谱特征周期反映了地震动频谱特性,也是抗震设计中重要的特征参数.为了研究汶川特大地震反应谱特征周期的特性,本文以汶川地震中173个有详细地勘场地上的强震动记录为基础,统计分析了不同场地类别和断层距的反应谱特征周期,并与我国现行抗震设计规范中特征周期的规定值进行比较.本文研究结果显示随着场地变软,特征周期平均值有增大趋势;与汶川特大地震中反应谱特征周期的统计结果相比,我国抗震设计规范规定的远场反应谱特征周期值偏小. 相似文献
5.
本文将确定性数值模拟方法与地震动预测方程相结合,提出了一种重大水电工程场址设定地震的地震动时程生成方法。该方法基于场址设定地震,首先采用地震动预测方程确定场址的场地相关反应谱;其次建立包含震源和场址的场地模型,通过确定性数值模拟方法生成场址地震动时程;最后对生成的场址地震动时程进行调整,使其反应谱与设计谱相一致,用于工程抗震分析。这一方法生成的地震动时程既考虑了震源机制、传播路径以及局部场地效应等物理背景,又与场地相关的设计地震反应谱保持一致,为重大工程抗震分析与评价提供了一种新的思路。 相似文献
6.
7.
场地条件对地震动参数影响的关键问题 总被引：16，自引：8，他引：8
场地条件对地震动的影响很大,在地震动幅值（如峰值加速度）和频谱特性（如反应谱特征周期）的变化上均有体现,而我国现行抗震设计规范没有考虑不同场地条件下地震动峰值加速度和加速度反应谱平台值的变化。本文介绍了我国现行抗震设计规范中场地类别的划分方法、场地对地震动参数值的规定和存在的问题。详细分析了土层结构、覆盖层厚度等场地条件对地震动峰值加速度和反应谱的影响,以及已经取得的研究成果。最后,就场地分类、影响地震动参数的场地条件、地震动参数随场地条件调整的方法等,提出了有待进一步研究的问题。 相似文献
8.
9.
10.
抗震设计规范中的场地设计反应谱是一般工程抗震设计的依据,各国的抗震设计规范对场地设计反应谱的规定不尽相同。主要表现在反应谱的形状和谱参数的差异。本文收集了若干国家的抗震设计规范;在总结各国抗震设计规范中关于场地设计反应谱规定的基础上,对中国、美国、日本、欧洲、土耳其和智利等有代表性的国家和地区的抗震设计规范进行分析和对比研究;总结了我国抗震设计规范场地设计反应谱的演化历史和发展过程;提出了进一步开展这一领域研究工作的若干建议,本文的工作对从事场地设计反应谱研究的科技人员有重要的参考价值。 相似文献
11.
12.
消能减振房屋抗震设计方法研究述评 总被引：3，自引：0，他引：3
阐述了安装有粘滞流体阻尼器的消能减振房屋抗震设计的原理和方法，包括阻尼器的工作原理和计算模型，性能试验和检验的标准，附加阻尼比公式的推导和抗震设计方法等。 相似文献
13.
将钢框架结构按其性能划分为使用良好、人身安全、防止倒塌三个水平,并用层间侧移角予以量化采用钢框架的最大层侧移模式来确定其目标侧移曲线在等效线性化的前提下,由等效位移用弹性位移反应谱求出等效周期,然后对构件进行刚度设计和承载力设计用静力弹塑性分析方法对结构进行分析,校核其实际侧移曲线与满足性能目标的侧移曲线是否一致.采用... 相似文献
14.
Establishment of performance‐based seismic design factors for precast concrete floor diaphragms 
下载免费PDF全文
下载免费PDF全文 This paper presents an analytical study used to establish design factors for a new seismic design methodology for precast concrete floor diaphragms. The design factors include diaphragm force amplification factors Ψ and diaphragm shear overstrength factors Ωv. The Ψ factors are applied to the ASCE7‐05 diaphragm design forces to produce diaphragm design strengths aligned to different performance targets. These performance targets are based on diaphragm detailing choices, and include: (i) elastic diaphragm behavior or (ii) limiting inelastic deformation demand on the diaphragm reinforcement (connectors between precast units or reinforcing bars in a topping slab) to within their reliable deformation capacities. The Ωv factors provide overstrength relative to the diaphragm bending strength for capacity protection against shear failure. The analytical study was performed by conducting nonlinear time history analyses of a simple evaluation structure, of which the dimensions and structural properties were varied. The analytical model used in the study is constructed and calibrated on the basis of extensive physical testing. The analytically obtained values of the diaphragm design factors are presented as functions of the geometric and structural properties of the building. The design factors presented here have been verified through evaluation of a set of realistic precast prototype structures. The diaphragm design methodology is currently in the codification process. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
15.
高烈度区连续梁桥的减震设计方法研究 总被引：2，自引：1，他引：2
本文以高烈度区的某三跨连续梁桥为例，分别采用基础隔震和消能减震两种措施进行结构的减震分析；针对隔震结构减震效果好但主梁位移过大的特点，提出了在采用铅芯橡胶隔震支座的同时设置粘滞阻尼器的减震方案，其非线性时程分析结果表明，该方案能有效地降低结构的地震反应，可供工程实践参考。 相似文献
16.
A fully automated design methodology based on nonlinear response history analysis is proposed for the optimum seismic design of reinforced concrete (RC) structures. The conventional trial‐and‐error process is replaced by a structural optimization algorithm that serves as a search engine capable of locating the most efficient design in terms of cost and performance. Two variations of the proposed design methodology are introduced. The first approach treats the optimum design problem in a deterministic manner, while in the second variation the optimum design is sought in the framework of a reliability‐based optimization problem. The reliability‐based approach seems to be a more rational procedure since more meaningful design criteria that correlate better with the performance‐based design concept can be adopted. Thus, the practice of using the mean annual frequency of a limit‐state being exceeded to assess the candidate designs is compared with the use of deterministic criteria. Both formulations take into consideration the structural response for a number of limit‐states, from serviceability to collapse prevention. The proposed design procedure is specifically tailored to the design of RC structures, where a preliminary design step of generating tables of concrete sections is introduced. In order to handle the large size of the tables, the concept of multi‐database cascade optimization is implemented. The final design has to comply with the provisions of European design codes. The proposed methodology allows for a significant reduction of the direct construction cost combined with improved control of the seismic performance under earthquake loading. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
A simplified seismic design procedure for steel portal frame piers installed with hysteretic dampers is proposed, which falls into the scope of performance‐based design philosophy. The fundamental goal of this approach is to design a suite of hysteretic damping devices for existing and new bridge piers, which will assure a pre‐defined target performance against future severe earthquakes. The proposed procedure is applicable to multi‐degree‐of‐freedom systems, utilizing an equivalent single‐degree‐of‐freedom methodology with nonlinear response spectra (referred to as strength‐demanded spectra) and a set of formulae of close‐form expressions for the distribution of strength and stiffness produced in the structure by the designed hysteretic damping devices. As an illustrative example, the proposed procedure is applied to a design of a simple steel bridge pier of portal frame type with buckling‐restrained braces (one of several types of hysteretic dampers). For the steel portal frame piers, an attempt is made to utilize not only the displacement‐based index but also the strain‐based index as pre‐determined target performance at the beginning of design. To validate this procedure, dynamic inelastic time‐history analyses are performed using the general‐purpose finite element program ABAQUS. The results confirm that the proposed simplified design procedure attains the expected performance level as specified by both displacement‐based and strain‐based indices with sufficient accuracy. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
18.
This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
19.
20.
利用数字化速度记录仿真加速度时程与合成场地设计地震波 总被引：2，自引：1，他引：2
研究利用测震台网数字化宽频带速度型记录仿真加速度时程,并通过提取其相位信息和拟合场地设计反应谱(目标谱)的方法来获得场地设计地震波的有关技术途径与应用实例,所提供的具体算式采用便于编程和利用快速傅氏变换(FFT)技术进行计算的离散化傅氏正逆变换的复数表达式。有关研究结果可拓宽现有地震观测资料的使用价值,减少地面运动模拟中人造地震波与原始地震记录存在的差异,并可使所合成的设计地震波满足给定的目标谱,且能较好地反映其非平稳性特征,因此在地震工程中具有实际的应用价值。 相似文献