共查询到17条相似文献，搜索用时 218 毫秒
1.
考虑SSI效应的立式储罐水平基础隔震研究 总被引：2，自引：0，他引：2
立式储罐在地震作用下破坏严重,损失较大.为了降低立式储罐在水平地震激励下的地震响应,考虑土与结构相互作用对储罐地震响应的影响,将立式储罐基础隔震体系简化为3质点5自由度力学模型.依据Hamilton原理建立立式储罐基础隔震体系的控制方程,给出了立式储罐基底剪力、倾覆弯矩、晃动波高和应力的理论表达.选取150000m3储罐,采用wilson-θ法对其进行了地震动响应分析.结果表明:储罐基础隔震体系能够降低储罐的地震响应;为获得理想的地震响应,场地、隔震周期和阻尼比存在优化取值区间;储罐抗震与减震设计要视设计安全需要来决定是否考虑土与结构的相互作用. 相似文献
2.
浮放储罐三维地震反应有限元分析 总被引：1，自引：0，他引：1
针对立式储罐,考虑液固耦合效应、地基与储罐结构的相互作用,采用有限元分析方法,对储罐在三维地震荷载作用下动反应进行了数值分析。分析结果表明：储罐三维地震加速度反应较一维地震加速度反应增加、提离高度明显放大、储罐轴向应力增加、基底剪力与弯矩增大。 相似文献
3.
本文采用液压阻尼系统（HDS）控制立式圆柱钢制储罐的地震反应，建立了安装HDS储罐的力学分析模型，并进行了数值计算，从频域对安装HDS后储罐的地震响应进行了分析，研究了HDS的减震效果和HDS和HDS参数对储罐地震反应的影响。 相似文献
4.
5.
大型立式浮顶储罐基础隔震数值研究 总被引：2，自引：0，他引：2
强震作用下,立式浮顶储罐破坏严重。为了降低浮顶储罐的地震响应,选取15×104m3大型立式浮顶储罐,引入基础隔震措施,并考虑浮顶的影响,应用势流体理论,采用ADINA建立有限元模型。研究在不同隔震层阻尼比、不同隔震周期、不同烈度及不同场地条件影响下,基础隔震浮顶储罐的地震响应并进行对比分析。结果表明:当隔震层阻尼比为0.2～0.3时减震效果较好,阻尼比存在合理优化区间;随着隔震周期、地震烈度的增加,基础隔震浮顶储罐的减震率增加;基础隔震浮顶储罐的减震效应受场地条件影响较大;基础隔震措施不能有效控制浮顶储罐的晃动波高。浮顶储罐隔震设计时需要综合考虑多种因素,选取最佳隔震设计参数。 相似文献
6.
立式储液罐地震反应数值分析 总被引：3，自引：0，他引：3
本文采用大型有限元程序ANSYS对立式储液罐的地震反应进行了研究,考虑了不同罐体和内部液体的相互作用,采用3个不同容积的储罐,输入不同强度的地震动时程,进行了大量的数值计算,给出了一些结论。 相似文献
7.
液压阻尼系统控制浮放立式储罐提离失稳 总被引：1，自引：0，他引：1
立式圆柱储罐在油田、石油化工等企业用途广泛，多用作存贮易燃、易爆介质，一旦遭遇震害，后果将十分严重。本文针对浮放立式储罐地震响应的提离失稳问题，采用液压阻尼系统（HDS）用以控制储罐的提离反应，建立了安装HDS储罐的力学分析模型并进行了数值计算，对安装HDS后储罐的提离反应进行了分析。仿真计算结果表明：HDS可以有效地减小提离应力，从而地震烈度可以降低1度进行储罐的提离设计。 相似文献
8.
9.
隔震立式储罐地震反应谱分析 总被引：4，自引：2，他引：2
基于反应谱理论,研究了的基底隔震储罐的地震响应问题.将储罐简化为三质点体系力学模型,罐内连续液体质量等效为对流质量、脉冲质量和刚性质量,并引入隔震刚度.与时程分析对比,验证反应谱法的适用性,分析隔震立式储罐的地震响应并研究主要参数对隔震储液罐地震响应的影响,主要考虑的参数有:(1)场地类别;(2)隔震周期;(3)高径比.结果表明:反应谱法计算隔震立式储罐地震响应是偏于安全的;随着场地类别和隔震周期的增大,基底剪力减震率逐渐降低,晃动波高变化不明显,隔震后,液动压力呈线性变化,液动压力随着场地类别和高径比的增大而增大,随着隔震周期的增大而减小;高径比存在一定的优化段,在优化段内,基底剪力减震率较大,隔震效果较好. 相似文献
10.
基于概率估计方法的立式储罐地震易损性研究 总被引：1，自引：1，他引：0
结合储罐的震害资料和震害特点,提出了基于概率估计方法的立式储罐地震易损性研究.考虑了结构的随机性及荷载作用的随机性,给出了各随机变量的概率分布模型及给定烈度下地震发生的概率.从可靠度指标的几何意义入手,提出了储罐的地震易损性计算方法.通过2×103m3和5×104m32种高矮罐的地震易损性研究,结果表明:通过概率方法和绘制地震易损性曲线的方式,更能直观的给出储罐各失效模式的地震易损性.储罐的地震易损性与地震烈度、高径比的关系很大,地震易损性随着地震烈度的增大逐渐增大;与2×103m3储罐相比,5×104m3储罐各失效模式地震易损性明显较小;从多种失效模式进行储罐地震易损性研究更具有科学性. 相似文献
11.
Storage tanks are vulnerable to earthquakes, as numerous major earthquakes have demonstrated. The trend of recent revisions to make seismic design criteria for large‐scale industrial storage tanks increasingly stringent has made development of cost‐effective earthquake‐resistant design and retrofit techniques for industrial tanks imperative. This study assesses the feasibility of seismic base isolation for making liquid‐filled storage tanks earthquake resistant. The sliding‐type friction pendulum seismic (FPS) bearings are considered rather than the elastomeric bearings because the dynamic characteristics of an FPS‐isolated tank remain unchanged regardless of the storage level. This work has devised a hybrid structural‐hydrodynamic model and solution algorithm, which would permit simple, accurate and efficient assessment of the seismic response of rigid cylindrical storage tanks in the context of seismic isolation. Extensive numerical simulations confirm the effectiveness of seismic base isolation of rigid cylindrical tanks using FPS bearings. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
12.
Sandip Kumar Saha Vasant A. Matsagar Arvind K. Jain 《Bulletin of Earthquake Engineering》2016,14(4):1153-1175
Seismic fragility curves for fixed-base and base-isolated liquid storage tanks are developed under non-stationary earthquakes, and their seismic performance are compared. The correlation between different earthquake intensity measure (IM) parameters and peak response quantities of the base-isolated liquid storage tanks are investigated. The failure criteria are chosen based on (1) the elastic buckling strength of the tank wall, which is defined in terms of critical base shear and critical overturning moment, and (2) in terms of the critical isolation displacement. The uncertainty involved is considered in the earthquake characteristics. Non-stationary earthquake ground motions are generated using Monte Carlo (MC) simulation. Influence of the isolator characteristic parameters and modeling approaches on the seismic fragility of the base-isolated liquid storage tanks is also investigated. Peak ground acceleration is found to be the well correlated IM parameter with the peak response quantities of the base-isolated liquid storage tanks. Substantial decrease in the seismic fragility of the base-isolated liquid storage tanks is observed as compared to the fixed-base tanks. Significant influence of the isolator characteristic parameters on the seismic fragility of the base-isolated liquid storage tanks are reported in the present study. 相似文献
13.
14.
A method for analyzing the earthquake response of elastic, cylindrical liquid storage tanks under vertical excitations is presented. The method is based on superposition of the free axisymmetrical vibrational modes obtained numerically by the finite element method. The validity of these modes has been checked analytically and the formulation of the load vector has been confirmed by a static analysis. Two forms of ground excitations have been used: step functions and recorded seismic components. The radial and axial displacements are computed and the corresponding stresses are presented. Both fixed and partly fixed tanks are considered to evaluate the effect of base fixation on tank behaviour. Finally, tank response under the simultaneous action of both vertical and lateral excitations is calculated to evaluate the relative importance of the vertical component of ground acceleration on the overall seismic behaviour of liquid storage tanks. 相似文献
15.
16.
中国核电厂抗震设计规范推荐采用的Housner模型不适用于复杂形状核电储液结构的流固耦合分析。对于AP1000和CAP1400核电站屏蔽厂房顶部非能动安全壳冷却系统重力水箱(简称PCS水箱),基于圆柱形水箱的Housner等效质量-弹簧模型,通过引入水箱体积修正参数,提出PCS水箱的三维等效质量-弹簧模型。采用有限元软件ADINA建立水箱结构流固耦合整体有限元模型以进行模态分析,计算分析PCS水箱和对应环形水箱在不同尺寸和液体深度条件下的液体晃动自振特性。对比整体有限元模型与三维等效质量-弹簧模型计算结果发现,提出的PCS水箱三维等效质量-弹簧模型能给出其内液体晃动各阶振型的液动压力合理估计值,适用于具有复杂形状的PCS水箱液动压力分析。本文的等效模型方法可推广应用于其他复杂形状水箱的液动压力分析。 相似文献
17.
A numerical and experimental study on the sloshing behaviours of cylindrical and rectangular liquid tanks is addressed. A three‐dimensional boundary element method for space with the second‐order Taylor series expansion in time is established to simulate the sloshing phenomenon and its related physical quantities inside a liquid tank subjected to horizontal harmonic oscillations or recorded earthquake excitations. The small‐scale model experiments are carried out to verify some results of numerical methods in this study. The comparisons between numerical and experimental results show that the numerical method is reliable for both kinds of ground excitations. Finally, the water wave and the base shear force of a rectangular tank due to harmonic excitation are also presented at different frequencies. A huge cylindrical water tank subjected to a recorded earthquake excitation is used for application and discussion. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献