共查询到18条相似文献，搜索用时 203 毫秒
1.
将柯坪块体作为研究对象,利用最大似然法进行b值计算,并结合利用双差定位法对柯坪块体上发生的ML≥1.6地震重定位后的结果,寻找沿柯坪块体主要断裂带的凹凸体.研究发现,柯坪块体上发生地震的震中主要沿断裂带分布,沿柯坪塔格逆断裂带存在凹凸体,该区域虽已发生大地震,但依然处于高应力水平,因此初步判定沿柯坪塔格逆断裂带仍存在发... 相似文献
2.
大凉山次级块体内强震发生的构造特征与2014年鲁甸6.5级地震对周边断层的影响 总被引：4，自引：3，他引：1
2014年8月3日,在云南鲁甸发生MS6.5地震.该地震位于巴颜喀拉块体、川滇块体与华南块体三者之间的以挤压和左旋走滑为主要活动特征的大凉山次级块体内部.该次级块体吸收了来自川滇块体和巴颜喀拉块体的挤压作用,主要以各边界断裂带的挤压作用和内部大凉山断裂带、峨边断裂带等NNW向的左旋走滑次级断裂为主要特征;在历史上大凉山次级块体边界上以7级以上强震活动为主要特征,而在次级块体内部则以5级地震频繁活动为主.2014年鲁甸MS6.5地震发生在逆冲走滑断裂带内部的NNW向左旋走滑断裂上,该地震主要受到了发生在小江断裂带上的1733年M73/4和则木河断裂带上的1850年M71/2强震的影响,这两次地震对2014年鲁甸MS6.5地震有促进作用,而2014年鲁甸6.5级地震促进了2014年10月1日越西5.0级地震的发生,此外鲁甸地震对大凉山断裂带北段、峨边断裂带、昭通-鲁甸断裂带东段以及则木河断裂带南段有一定的库仑应力增强作用. 相似文献
3.
文中收集了1999—2015年天山地震带及其周边地区的GNSS数据,计算得到了速度场结果,并利用弹性块体模型计算了研究区域内各块体的闭锁深度和主要断层的滑动速率。研究结果表明:南天山断裂带西段的迈丹断裂的缩短速率处于高值状态,达(-6.3±1.9) mm/a,高于南天山东段;北天山断裂带西段的缩短速率同样高于东段。利用主要断裂带的滑动速率计算出各地震带的地震矩积累变化及1900年以来的地震矩释放变化量,以分析地震矩亏损分布,结果显示北天山山前断裂、迈丹断裂、额尔齐斯断裂带北段和喀什河断裂西段存在较大的地震矩亏损,具有孕育7级以上地震的潜能,而北轮台断裂、柯坪断裂带中段则呈现地震矩盈余状态,在未来的一段时间内不具备发生强震的可能。 相似文献
4.
5.
川滇交界东段NE向昭通、莲峰断裂带的研究程度较低.为了了解该断裂带是否存在发生强震/大地震的危险背景,我们基于区域活动构造与动力学、重新定位的小震分布和震源机制解、历史地震破裂区、GPS形变场、现代地震活动及其参数图像等多学科的信息进行综合研究.结果表明:昭通、莲峰断裂带是川滇-华南活动块体/地块边界带的一部分,也是活动及变形的大凉山次级块体与相对稳定的华南地块之间的边界带;结构上表现为2个平行展布、朝南东推覆的断裂带,现今运动为带有显著逆冲分量的右旋走滑性质.沿昭通断裂带无大地震的时间至少为1700 余年,目前存在地震空区.GPS变形图像反映昭通、莲峰断裂带已不同程度闭锁.另外,昭通断裂带的鲁甸附近以及莲峰断裂带的南段分别存在异常低b值区或高应力区.已由低b值区和小震空白区识别出昭通断裂带上的鲁甸-彝良之间存在高应力闭锁段,并估计出其潜在地震的最大矩震级为MW7.4.本研究因此认为昭通断裂带存在发生强震/大地震的中-长期危险背景, 而莲峰断裂带的危险性还需进一步研究. 相似文献
6.
1988年至2001年,青藏块体中部的巴颜喀拉块体沿其北部边界的东昆仑断裂带连续发生了3次7级以上和1次8．1级地震。之后,在其西部边界于2008年发生了于田7．3级地震,东部边界的龙门山断裂带发生了2008年汶川8．0级地震,在南部边界的甘孜-玉树-风火山断裂带上发生了2010年玉树7．1级地震。对这一系列地震的震源机制解分析,结果表明,除西边界的于田7．3级地震为正断层性质、东边界的汶川8．0级地震为逆断层性质以外,其他断裂带上的地震性质均以走滑为主,总体表明巴颜喀拉块体具有向东走滑的特性。本文尝试根据构造相互作用和块体运移特征等对这几次地震进行相关分析。 相似文献
7.
利用断裂带上的低b值识别凹凸体方法的探讨——以龙门山断裂带和鲜水河断裂带为例 总被引：2，自引：1，他引：1
本文对龙门山断裂带和鲜水河断裂带上1970年以来记录的小震数据进行了收集、整理和分析,采用基于Matlab平台的Zmap软件,去除了断裂带上的丛集数据和余震,划定了有效地震数据的时间和震级范围,通过最大似然法求取了断裂带所在区域的b值分布图。基于b值大小与应力高低成反比的原理,通过断裂带上低b值区识别凹凸体的位置。就龙门山断裂带,通过低b值区识别出的凹凸体的位置与汶川地震发生的起始破裂位置和极震区的位置基本保持一致;而鲜水河断裂带由于受到小震数据的限制,部分段缺失b值分布,但整条断裂带仍可清晰识别出凹凸体位置,且1725年以来的历史强震和1970年以来5级以上的历史地震基本上都位于此区域。断裂带的实例分析结果证明,利用小震数据通过最大似然法计算b值分布图,其相对低b值区与历年强震发生的位置存在较大的相关性,为验证利用低b值区识别凹凸体方法的可行性和实用性提供了有力的证据。 相似文献
8.
根据最近34a的区域台网地震资料,利用地震活动性参数b值的空间分布,结合历史强震与现今地震活动背景,分析了川南马边地区主要断裂带的现今活动习性,并初步判别出了潜在的强震危险区域。研究结果表明:1)马边地区的b值空间分布存在明显的空间差异,反映了该区域不同断裂带与断裂段应力积累水平的差异;2)马边-盐津断裂带上存在3个尺度不等的异常低b值区,它们可能是该断裂带上的相对高应力区(或凹凸体),其中位于马边北、沐川西部利店镇附近的凹凸体与位于该断裂带南端盐津附近的凹凸体可能是马边地区未来发生大地震的危险场所,而位于绥江南的小尺度凹凸体有可能是潜在强震的发生地点;3)存在于龙泉山断裂带西南段的凹凸体将是未来发生中强地震的场所;4)金口河-美姑断裂上位于汉源县皇木镇与峨眉山市龙池镇之间的凹凸体存在发生中强地震的可能性 相似文献
9.
基于Sentinel-1 SAR升、降影像,利用D-InSAR技术获取新疆伽师M S6.4地震的同震形变场,结果表明,本次地震引起的同震形变场整体呈近椭圆状分布,形变区东西长约66 km,南北宽约40 km,整个形变场由南部隆升区和北部沉降区组成,南部最大隆升量约7 cm,北部最大沉降量约3 cm。本次地震发生在块体俯冲界面处的低倾角逆冲推覆构造带上,隆升和沉降两个中心均位于逆冲推覆体的上盘,形变主要以隆升形变为主,符合低倾角逆断层中强震的变形特征。在沉降区与隆升区之间干涉条纹连续分布,未出现表征地表破裂位置的空间失相关带,表明地震未引起明显的地表破裂。结合震源机制、余震精定位及区域构造特征,初步推断认为伽师地震的发震构造可能为柯坪塔格推覆构造前缘的N倾的柯坪断裂。 相似文献
10.
基于活动块体的基本概念,综合对研究区内活动断裂带空间展布、地震活动性等资料的分析将巴颜喀拉块体东部及邻区划分为巴颜喀拉块体（I）、华南块体（Ⅱ）、川滇块体（Ⅲ）和西秦岭块体（IV）等4个一级块体.利用GPS形变场、地球物理场等资料结合F检验法,将巴颜喀拉块体划分为阿坝（I1）、马尔康（I2）和龙门山（I3）3个次级块体,将西秦岭块体划分为岷县（IV1）和礼县（IV2） 2个次级块体.利用分布在各个块体内部的GPS测站,计算各活动块体及块体边界断裂带的运动变形特征.结果表明：各活动块体的整体运动包括平移和旋转运动;东昆仑断裂带、甘孜—玉树断裂带和鲜水河断裂带的滑动速率明显高于龙门山断裂带的滑动速率;巴颜喀拉块体东部走向北西或北西西的边界断裂表现出左旋拉张的特性;走向北东的边界断裂带,除成县—太白断裂带外,均表现出右旋走滑兼挤压的活动特征.巴颜喀拉块体的东向运动存在自西向东的速度衰减,衰减主要被龙日坝断裂带和岷江断裂带分解吸收,其中龙日坝断裂带的水平右旋分解非常明显,约为~4.8±1.6 mm/a,岷江断裂带的水平分解较弱.龙门山断裂带被马尔康、龙门山和岷县等次级块体分成南、中、北三段,龙门山断裂带中段上的主压应变率要明显小于龙门山断裂带南段上的应变率,其北西侧变形幅度从远离断裂带较大到靠近断裂带逐渐减小,表明其在震前已经积累了较高的应变能,有利于发生破裂滑动.汶川地震后,地表破裂带和余震分布揭示的断裂带运动性质自南西向北东由以逆冲运动为主,逐渐转为逆冲兼走滑的特征可能与龙门山断裂带中段所受主压应力方向自南西向北东的变化有关.马尔康、龙门山和岷县3个次级块体与华南块体之间较低的相对运动速度以及龙门山断裂带低应变率、强闭锁的特征都决定了汶川地震前龙门山断裂带低滑动速率的运动特征. 相似文献
11.
1996年3月19日新疆阿图什6.9级地震震源破裂特征的研究 总被引：4，自引：0，他引：4
通过对1996年3月19日新疆阿图什6．9级地震余震分布特征的研究，分析了这次地震震源破裂过程．并结合柯坪断裂带的构造运动、区域应力场的分布特征以及1972年以来该带的另外3次6级地震的余震分布方向，探讨了柯坪断裂带附近地区不同构造部位震源破裂扩展方向与强震活动的迁移方向．结果表明，本次地震震源破裂为明显的单侧破裂．柯坪断裂带的阿图什震区和柯坪震区，余震分布具有一定规律性，震源破裂基本都为单侧破裂；震源断错以逆断层为主．区内主要受NW向压应力。不同地段强震震源破裂扩展具有明显的区域特征，强余震分布方向是应力集中的体现，它标志着同一构造断裂带附近近期强震活动的迁移方向．在柯坪断裂带上这种规律更为明显。 相似文献
12.
新疆主要逆断层-褶皱构造区基本地震构造特征与潜在震源划分问题 总被引：3，自引：1，他引：2
本文介绍了新疆主要逆断层-褶皱构造区的基本特征,并对其潜在震源划分问题进行了初步的讨论。北天山山前推覆构造及乌鲁木齐以南的逆断裂-褶皱构造相对比较简单,由根部断裂、推覆体和前缘逆断裂-褶皱构造所组成;强地震的极震区或地震动的高值区可能位于推覆构造的根部断裂附近,而地震地表破裂和同震地表变形则位于山前逆断层-褶皱带内。南天山的柯坪推覆构造、库车推覆构造、帕米尔东北缘的弧形推覆构造,虽然也由多排逆断裂-褶皱构造带组成,但是其中的规模巨大、发育时间较长的逆断裂-背斜带,往往具备发生强震的条件。强震的极震区分布与地震地表断层位置比较一致,可作为强震的潜在震源。盆地内的新的盲逆断层-褶皱构造也具备发生6.5—7.0 级地震的能力,应作为震级上限为 7.0 级的潜在震源。由于对逆断层-褶皱构造的深浅构造关系及发震模型认识的不足,在潜在震源划分中应考虑这种不确定性。同时在潜在震源区划分中,还应考虑地震构造区的地震活动历史及构造活动性参数。 相似文献
13.
地貌参数指示的临潭-宕昌断裂带最新构造隆升差异与地震活动 总被引：5，自引：3，他引：2
2013年7月22日,甘肃岷县漳县MS6.6地震发生在青藏高原东北缘的临潭-宕昌断裂带上。为了研究该断裂的最新构造隆升的差异性,基于ASTER GDEM数字高程模型数据提取了流域盆地及水系,并以此为基础,计算了面积高程积分及河道坡度指数。2个地貌参数的分析结果表明,临潭-宕昌断裂不同部位的最新隆升呈现不均匀性。其中,断裂的最新逆冲活动在临潭以西及以岷县附近明显强于其他各段。上述地貌参数所指示的断裂抬升强度还与历史及现今地震发震位置较好地匹配,体现了定量化地貌分析对断裂活动强弱的指示作用。临潭-宕昌断裂受区域NE-SW向挤压构造应力作用影响,其活动的差异可能与晚第四纪以来巴颜喀拉块体NE向扩展背景下的局部应力集中有关。 相似文献
14.
Tian Qinjian 《中国地震研究》2007,21(1):74-84
The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles. 相似文献
15.
MIGRATION OF LARGE EARTHQUAKES IN TIBETAN BLOCK AREA AND DISSCUSSION ON MAJOR ACTIVE REGION IN THE FUTURE 
下载免费PDF全文
下载免费PDF全文 YUAN Dao-yang FENG Jian-gang ZHENG Wen-jun LIU Xing-wang GE Wei-peng WANG Wei-tong 《地震地质》1979,42(2):297-315
On the basis of summarizing the circulation characteristics and mechanism of earthquakes with magnitude 7 or above in continental China, the spatial-temporal migration characteristics, mechanism and future development trend of earthquakes with magnitude above 7 in Tibetan block area are analyzed comprehensively. The results show that there are temporal clustering and spatial zoning of regional strong earthquakes and large earthquakes in continental China, and they show the characteristics of migration and circulation in time and space. In the past 100a, there are four major earthquake cluster areas that have migrated from west to east and from south to north, i.e. 1)Himalayan seismic belt and Tianshan-Baikal seismic belt; 2)Mid-north to north-south seismic belt in Tibetan block area; 3)North-south seismic belt-periphery of Assam cape; and 4)North China and Sichuan-Yunnan area. The cluster time of each area is about 20a, and a complete cycle time is about 80a. The temporal and spatial images of the migration and circulation of strong earthquakes are consistent with the motion velocity field images obtained through GPS observations in continental China. The mechanism is related to the latest tectonic activity in continental China, which is mainly affected by the continuous compression of the Indian plate to the north on the Eurasian plate, the rotation of the Tibetan plateau around the eastern Himalayan syntaxis, and the additional stress field caused by the change of the earth's rotation speed.
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
16.
介绍了2011年8月11日新疆阿图什、伽师交界5．8级地震基本参数、地震序列特征,分析了震前震区周围及相邻构造区地震活动特征。研究结果表明：（1）5．8级地震发生在柯坪断裂,震源断错类型为逆冲型;（2）该地震序列为主．余型,余震衰减较快;（3）地震活动表明震前存在4级地震围空、地震平静、中等地震增强、地震学参数时间扫描异常等中期异常和小震群活动短期异常。 相似文献
17.
昆仑山口西8.1级地震前青藏块体边界断层异常活动 总被引：5，自引：0，他引：5
系统分析了青藏块体边界断层的形变资料，研究了断层活动的动态过程及空间分布。结果表明，昆仑山口西8．1级地震前孕震影响范围达到青藏块体的周边地区；发震断层所在的构造带震前断层活动最为剧烈；加强对构造块体断层整体活动的宏观动态比较和分析，有助于判定未来强震发生的危险地段；震后应力将转移并集中到西秦岭构造带及其邻近地区。 相似文献
18.
本文采用地貌分析法确定了云南省通海—石屏地区第四纪中的地表垂直构造形变。应用这个形变资料,根据弹性位错理论求得区内几条活动断层的错距,其中曲江断裂的右旋水平错距为5公里。指出本区在第四纪中主要受北北西—南东东方向的压应力作用。根据地震裂缝、三边测量、定点基线测量和震源机制资料,求得本区现代构造应力场。作者发现它与第四纪构造应力场是相似的。由曲江断裂的平均5—7毫米/年的水平运动速度去估计,通海7.7级地震平均复发周期为300—400年。作者还指出通海地震前400年内,地震活动形成空区。并利用围空地震资料,求得空区内地震震级M与围空地震的断层总面积S之间存在经验关系, M=1gs-3.8 相似文献