共查询到20条相似文献，搜索用时 151 毫秒
1.
Far-field signatures from an airgun array are usually obtained by carrying out extensive field measurements. In order to decrease the need for such measurements, we have developed a method for computing signatures from linear airgun arrays where the distances between the airguns are such that the non-linear interaction among the airguns is negligible. The signature from a single airgun of a given type is computed from the following airgun parameters: airgun chamber volume, chamber pressure, airgun depth and position of the waveshape plate within the chamber. For calibration purposes, a recorded signature for one set of airgun parameters has to be provided for each type of airgun. The signatures are computed by using empirical relations between signature properties and the airgun parameters, and by treating the primary and bubble pulses separately. The far-field signature from a linear airgun array can now be computed by summation of the delayed signatures from the airguns in the array. Practical results are shown for an array with different PAR (Bolt) 1500 C airguns. 相似文献
2.
The far-field signatures from a comprehensive and systematic airgun pulse test have been analyzed. Empirical relations between the characteristic signature parameters and depth (5–12 m), pressure (100–137 bar = 10–13.7 MPa) and total chamber volume (0.65–9.5 l) have been derived. Also, the influence of using waveshape kits in different positions within the chamber has been tested. The results indicate that:
- 1 The amplitude is proportional to chamber pressure to the power 3/4.
- 2 The bubble period is nearly independent of the position of the waveshape plate.
- 3 The increase in primary/bubble amplitude ratio is inversely proportional to the chamber volume above the waveshape plate.
- 4 The amplitude is independent of airgun depth.
3.
J. J. NOOTEBOOM 《Geophysical Prospecting》1978,26(1):194-201
During the last few years many airgun arrays have been designed with the objective of generating a short signature of high amplitude. For linear arrays of non-interacting airguns two rules have been derived that may help in the design or evaluation of airgun arrays. To achieve a short pressure pulse, the total available air volume has to be distributed over the individual guns in such a way that the tail of the signal, owing to the added bubble signals, becomes as flat as possible. When we think of ordering airguns according to volume, this flat signal tail can be achieved by designing the volumes such that the difference in bubble times of two adjacent guns is proportional to their volume to the power 2/3. The amplitude expected from a linear array of non-interacting airguns is limited by the physical length of the array. A graph of measured values tends to confirm this relation. No relation has been found between the total volume of an array and its amplitude. The graph also detects inefficient use of available array length of existing arrays. 相似文献
4.
Experiments in an 850 litre water tank were performed in order to study temperature effects on airgun signatures, and to achieve a better understanding of the physical processes that influence an airgun signature. The source was a bolt airgun with a chamber volume of 1.6 cu.in. The pressure used was 100 bar and the gun depth was 0.5 m. The water temperature in the tank was varied between 5°C and 45°C. Near-field signatures were recorded at different water temperatures. Typical signature characteristics such as the primary-to-bubble ratio and the bubble time period increased with increasing water temperature. For comparison and in order to check whether this is valid for larger guns, computer modelling of airguns with chamber volumes of 1.6 and 40 cu.in. was performed. In the modelling the same behaviour of the signatures with increasing water temperature can be observed. The increase in the primary-to-bubble ratio and the bubble time period with increasing water temperature can be explained by an increased mass transfer across the bubble wall. 相似文献
5.
M. H. SAFAR 《Geophysical Prospecting》1983,31(2):343-350
Recently the author developed and demonstrated (Safar 1980) an efficient method for operating the airgun. The method involves the generation of a short seismic pulse from the pressure bubble pulses radiated by an airgun when fired several times at the same optimum depth but with different chamber pressures. The purpose of this paper is to present and discuss the test results obtained when implementing the same method using a two-dimensional airgun array. The array consists of seven 0.65 liter airguns fired simultaneously at the same depth but with different chamber pressures. It is shown that the far-field pressure pulse radiated by the seven 0.65 liter airgun array is similar to that radiated by the Flexichoc seismic source. It is concluded that the proposed airgun array can be used as a subarray to form an extremely powerful super-long array suitable for deep seismic exploration. The author would like to thank the Chairman and Board of Directors of the British Petroleum Co. Ltd for permission to publish this paper. Thanks are also due to Mike Symes and Lovell Cox for carrying out the field tests and Seismograph Service (England) Ltd for providing the airguns. 相似文献
6.
Models that simulate the signature of single airguns form the basis for modelingthe signals of airgun arrays. Most of the existing models assume that the air inside theproduced bubble is ideal gas, which may lead to errors because of the high operating pressureof the airguns. In this study, we propose a model that precisely simulates the signals of singleairguns by applying the Van der Waals equation based on the Ziolkowski algorithm. We alsoconsider a thermodynamically open quasistatic system, the heat transition between waterand gas, the throttling effect of the port and the bubble rise, and the effect of the sea surface.Modeling experiments show that （1） the energy of the source increases and the signal-to-noise ratio of the signature wavelet decreases with increasing seawater temperature, （2） thereflection coefficient of the sea surface under the actual state and depth of the source affectsthe notch caused by the surface reflection, （3） the computed signature with the proposedmodel is very close to the actual data, and （4） the proposed model accurately simulates thesignature of sinale air~uns. 相似文献
7.
High-speed photography has been used visually to study the shape, surface, turbulence and behaviour of an underwater oscillating bubble generated by an airgun. The source was a BOLT airgun with a chamber volume of 1.6cu.in., placed in a 0.85m3 tank at 0.5m depth. Near-field signatures were also recorded in order to compare the instant photographs of the oscillating bubble with the pressure field recorded about 25 cm from the gun. Estimations of the bubble-wall velocity and bubble radius estimated from high-speed film sequences are also presented, and are compared with modelled results. The deviation between the modelled and measured bubble radii was at most 9%. In order to check the capacity for transmission of light through the bubble, a concentrated laser beam was used as illumination. We found that the air bubble is a strong scattering medium of laser light, hence the bubble is opaque. 相似文献
8.
9.
大容量气枪震源子波时频特性及其影响因素 总被引：3，自引：3，他引：0
通过分析福建街面水库气枪实验的近场水听器记录,研究气枪子波时频特性及其受沉放深度和工作压力的影响,并结合气泡模型解释气泡振荡过程。数据分析表明：①气枪子波由主脉冲和气泡脉冲组成。主脉冲振幅大,持时短,频带宽,通常应用于浅部探测;气泡脉冲能量集中在低频段,垂直穿透深,水平传播远,通常应用于深部探测。②随沉放深度的增加,主脉冲振幅变化很小,气泡脉冲振幅增加,初泡比减小,气泡周期减小,低频段主频增加。沉放深度为10m时,主脉冲振幅和初泡比最大,可应用于浅部探测;沉放深度为25m时,气泡脉冲振幅很大,初泡比最小,可应用于深部探测。③工作压力增加时,主脉冲振幅、气泡脉冲振幅、初泡比、气泡周期等随之增大,低频段主频则减小。 相似文献
10.
利用固定台站分析长江激发气枪信号特征 总被引：1，自引：1，他引：0
“地学长江计划”安徽实验是以气枪震源为核心的大型主动源探测实验。通过在长江安徽段20个固定点定点激发气枪震源,结合109个固定台站、11条流动测线组成的观测网络,首次利用主动源实现了对长江流域安徽段约6万km2面积的三维地下结构探测。本文利用固定台站对长江激发气枪信号进行了分析,结果表明,长江中气枪信号激发效果良好,固定台记录中气枪信号可识别的最远距离达300km。对气枪信号绝对振幅的研究结果表明：① 50km处的气枪信号约为10nm量级,200km处的气枪信号小于1 nm;② 气枪信号强度的空间分布存在一定的方位各向异性,可能与长江的几何形状有关;③ 台站背景噪声对于提取气枪信号至关重要,高质量的固定台网为识别nm量级气枪信号提供了可能。 相似文献
11.
Three models for the dynamics of seismic airgun‐generated bubbles and their associated far‐field signals are developed and compared with geophysical data. The first model of an airgun‐generated bubble uses a spherical approximation, the second is an approximate Lagrangian model which allows for small deformations from a spherical shape, whilst the final model is an axisymmetric boundary‐integral method which permits the bubble to evolve into highly non‐spherical geometries. The boundary‐integral method also allows both geometric interference and strong dynamic interactions in multi‐bubble studies. When comparing the spherical model to experimental data there are three apparent, significant differences: the magnitude of the primary pressure peak, which is greater in the model; the subsequent decay of the pressure peaks and motion – the experimental data demonstrating greater decay and a slower rise rate; and the frequency of oscillation, which is slower in the experimental data. It is believed that the first discrepancy is due to the initial stages of expansion where the compressed air is forced to sparge through the airgun ports. The other differences indicate that there is some other energy‐loss mechanism which is not accounted for in the spherical bubble model. Non‐spherical bubble behaviour is investigated through the use of two different deformable many‐bubble codes and their predictions are compared with the spherical model and experimental data. The Lagrangian model predicts the formation of a buoyancy‐driven liquid jet on the first collapse of a typical airgun bubble; however, the model breaks down when the bubble becomes significantly deformed, due to a low‐order spherical‐harmonic approximation for the potential. The axisymmetric boundary‐integral code models the jet shape accurately and it is found that these bubbles evolve to toroidal geometries when the jet impacts on the opposite surface of the bubble. This highly non‐spherical behaviour is readily observed on high‐speed films of airgun bubbles, and is one key source of energy loss; it damps the pulsations of the bubble and slows its rise speed. Inter‐bubble interactions are investigated using the two deformable bubble models, and the predictions are compared to field data. It was found that as the bubbles approach each other, their periods of oscillation increase in accordance with observations, and jets are formed in the direction of motion upon collapse. 相似文献
12.
B. URSIN 《Geophysical Prospecting》1978,26(4):722-749
The use of arrays to separate primary reflections from unwanted coherent seismic events is common practice in land seismic surveys. Very long source and receiver arrays have been used recently to reduce the effects of waterbottom multiples on marine seismic data. The source array consists of five uniformly spaced identical subarrays, each with five different airguns, where the distance between the subarrays may vary from 20 m56 m. The volume of each subarray is 10.3 1 (630 cu.in.) which gives a total volume of the array of 51.5 1 (3150 cu.in.) operated at a pressure of 14 MPa (2000 psi). In order to have a flexible receiver system it was decided to implement the extended receiver array in data processing by computing a weighted sum of two to five traces. The hydrophone cable consists of fifty-four channels with a group length of 50 m. Data shot with the superlong airgun array are processed by a combination of standard techniques and special procedures. In particular, the quality of the stack section is improved by using a weighted stack. The stack weights are computed by a program which takes into account the primary-to-multiple ratio. Comparisons with conventional data show significant improvements in data quality obtained by using the superlong airgun array. Examples show that the waterbottom multiples have been strongly attenuated and the deep seismic events have been enhanced. The combined array response function for dipping events is given in an appendix. 相似文献
13.
Large volume airgun arrays have been widely used in exploring and monitoring underground structures for nearly a decade. Nowadays, large volume airgun arrays adopt the synchronous excitation mode, and source characteristics are controlled by the source signal of a single airgun, which to some extent limits its application. In order to realize the asynchronous excitation of the airgun array, we developed a new firing system for the airgun array, and carried out a field experiment in the Binchuan Fixed Airgun Signal Transmission station to study the influences of the asynchronous excitation on the source signal. The experimental results show that:the newly developed airgun array firing system can ignite the airguns according to the setting time series with high precision. By designing the excitation time series, the asynchronous excitation can enhance the energy of airgun source signal at 3-5Hz, and reduce the energy of pressure pulse wave at 6-18Hz. The signal detection capability of the asynchronous excitation with time series mode is equivalent to the synchronous excitation. 相似文献
14.
15.
The signal excited by the airgun source is weak, and is easily affected by human motion noise, instrument failure, and earthquake and blasting events, resulting in insufficient utilization of the amplitude information of the airgun signal. The effective removal of interference and the preservation of true amplitude information of the signal is difficult in airgun signal processing. Based on the randomness of noise and the highly repetitive characteristics of airgun signals, we propose probability data screening method. The airgun data from experiments conducted in the Ansha Reservoir and Shanmei Reservoir in Fujian Province in June, 2017 are taken as the research object to assess the effect in practical applications. The results show that the probability data screening method can automatically reject multiple interferences and effectively preserve the amplitude information of the signal by screening out large amplitude records in appropriate proportions. Compared with direct linear superposition, the probability-related linear superposition method can effectively reduce the impact of abnormal interference, and significantly improve the quality of the observed data. 相似文献
16.
由于气枪震源信号较弱, 容易受外界噪声或者地震等因素干扰, 而使得其真实的振幅被掩盖。 这些干扰记录若直接参与叠加容易导致振幅信息不可靠, 也会影响叠加效果。 为消除干扰影响, 提出概率筛选和噪声模型筛选振幅叠加方法, 以2018年6月在福建龙门滩水库和沙溪口水库的气枪实验数据为例, 从剔除干扰的能力、 波形形态、 振幅值等方面说明两种方法的实际效果, 并对比两者的优缺点。 研究结果表明: ① 两种筛选方法均能有效去除异常干扰, 经处理后的气枪信号的波形形态和最大振幅值与直接线性叠加基本一致; ② 对于固定台网台站, 噪声频谱方法可方便确认台站的运行状态, 及时筛除异常台站; ③ 对于灵敏度等信息不详的流动台站, 噪声模型筛选方法使用受限, 而概率筛选方法简洁, 适用性强。 相似文献
17.
A.M. ZIOLKOWSKI 《Geophysical Prospecting》1986,34(3):383-408
The article provides a theoretical basis for the extension of the method of scaling law deconvolution to three dimensions using airgun arrays as a sound source. Earlier papers by the author required the dimensions of the scaled sources to be different while the depths and firing pressures were maintained the same in order to preserve the same dynamics of the scaled sources at scaled time. However, this forces the source ghost to be considered as part of the impulse response of the earth rather than as part of the downgoing source wave. And, in fact, the dynamics of the scaled sources are not the same at the same depth because the ghost reflection modulates the behaviour of the oscillating bubbles generated by the airguns, and this modulation does not scale. To force the sources to scale properly, including the ghost interaction, the larger source must be put at greater depth, where hydrostatic pressure is greater, and the initial firing pressure must be adjusted accordingly. Thus, the depth, initial firing pressure and gun volume are all variables. The interaction among guns in scaled airgun arrays also scales exactly if the geometry of an array and the depth of its deployment are scaled by the same factor. 相似文献
18.
BEN F. GILES 《Geophysical Prospecting》1968,16(1):21-53
In recent years considerable work has been done to devise a satisfactory non-dynamite seismic system that would replace dynamite in offshore areas. Prior to the advent of digital recording and processing, the non-dynamite sources have generally not provided the depth of penetration or the resolution required for satisfactory seismic interpretation. More recent developments in non-dynamite offshore marine sources include adaptation of the Vibroseis from a land unit to a marine unit, and adaptation of the Dinoseis unit from a land to a marine unit. The SUE (Seismic Underwater Explorer) system is a thermodynamic non-dynamite source utilizing a mixture of propane and oxygen detonated in a special chamber approximately 15 feet below the water surface. This source gives penetration to more than 4 sec in areas typified by Gulf of Mexico type geology and shows deeper penetration than had previously been obtained by dynamite along the western United States in areas with 20 lb charge limitations. A pneumatic source, the airgun, has been in production use in the United States since June 1966. This non-dynamite source provides an intriguing amount of versatility and can be expanded to provide additional energy as necessary to obtain the penetration desired. Tests using systems comprised of from eight to twenty-three airguns show penetration in excess of 5 seconds in many areas. Power spectra comparisons both in amplitude and frequency content demonstrate that this is a controlled source generating a controlled seismic wavelet and a controlled frequency spectrum that can be tailored to fit requirements of particular areas. Sample sections obtained in the Gulf of Mexico and the Pacific Ocean offshore California show adequate penetration to 5.0 seconds reflection time. Quantitative measurements with the airguns demonstrate the effect of:
- 1 Variation of the number of guns in the system;
- 2 Shaping the frequency spectrum by using different sizes of airguns in the system;
- 3 Effects on signal-to-noise ratios as a result of stacking several small energy sources together;
- 4 Reproducibility of the initial pulse wavelet from shot to shot.
19.
In order to study the excitation of large-volume airgun source with different combinations in Hutubi, Xinjiang,China,we conducted a targeted experiment. The method of time-frequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool, and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals. Besides, linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source. In order to improve the signal-to-noise ratios, it is more effective to increase the activation energy (the number of excited guns at the same time) than to stack the excited signals with smaller energy repeatedly. 相似文献
20.
The ray formulae for the radiation from point sources in unbounded inhomogeneous isotropic as well as anisotropic media consist of two factors. The first one depends fully on the type and orientation of the source and on the parameters of the medium at the source. We call this factor the directivity function. The second factor depends on the parameters of the medium surrounding the source and this factor is the well-known geometrical spreading. The displacement vector and the radiation pattern defined as a modulus of the amplitude of the displacement vector measured on a unit sphere around the source are both proportional to the ratio of the directivity function and the geometrical spreading.For several reasons it is desirable to separate the two mentioned factors. For example, there are methods in exploration seismics, which separate the effects of the geometrical spreading from the observed wave field (so-called true amplitude concept) and thus require the proposed separation. The separation also has an important impact on computer time savings in modeling seismic wave fields generated by point sources by the ray method. For a given position in a given model, it is sufficient to calculate the geometrical spreading only once. A multitude of various types of point sources with a different orientation can then be calculated at negligible additional cost.In numerical examples we show the effects of anisotropy on the geometrical spreading, the directivity and the radiation pattern. Ray synthetic seismograms due to a point source positioned in an anisotropic medium are also presented and compared with seismograms for an isotropic medium. 相似文献