共查询到20条相似文献，搜索用时 31 毫秒
1.
Jiliang Wang Shiguo Wu Jianhua Geng Priyank Jaiswal 《Marine Geophysical Researches》2018,39(4):509-522
A better understanding of wave attenuation in hydrate-bearing sediments is necessary for the improved geophysical quantification of marine gas hydrates. Here we compare the attenuation behavior of hydrate-saturated vs water-saturated sediments at site GC955H, in the Gulf of Mexico, which was surveyed during the JIP Leg II expedition. We compute the P-wave attenuation of the gas hydrate bearing sediments using the median frequency shift method on the monopole waveforms. The results show that P-wave attenuation due to low saturation (<?0.4) in hydrate-filled fractures of fine-grained sediment is comparable to that of the water-filled fracture case. On the contrary, P-wave attenuation due to high saturation (>?0.4) in the hydrate-filled pores of coarse-grained sediments can be up to as much as three times more than that of the water-saturated case. The correlation analysis shows that the P-wave attenuation increases with the increasing gas hydrate saturation for the highly saturated gas hydrate-bearing sand interval while the correlation of the P-wave attenuation and hydrate saturation is weak for low saturated gas hydrate-bearing shale interval. The results show that P-wave attenuation is more likely to be used as a geophysical proxy for gas hydrate quantification of highly concentrated coarse-grained sediment rather than for that of fine-grained sediment. To examine the P-wave behavior in sand, we use the improved LCAM model, which accounts for physical factors such as grain boundary roughness and squirt flow to explain the observed differences in P-wave attenuation between hydrate and water-saturated coarse-grained sediment. Our results provide further geophysical evidences for P-wave behavior in the gas hydrate-bearing sediments in the field. 相似文献
2.
印度国家天然气水合物计划(NGHP01)于2016年实施第1次钻探,证实了天然气水合物在印度大陆边缘的广泛分布。选择位于克里希纳-戈达瓦里盆地(KG盆地)的NGHP01-07D和NGHP01-15A钻孔,基于测井数据和岩心样品估算天然气水合物饱和度,分析天然气水合物赋存状态并探讨其形成机制。基于各向同性介质模型利用电阻率和声波测井计算NGHP01-15A钻孔的天然气水合物饱和度为0. 2%～33. 0%,平均值为9. 6%,在NGHP01-07D钻孔利用电阻率计算获得的天然气水合物饱和度高于岩心氯离子异常和气体释放获得的结果,但是基于各向同性岩石物理模型利用声波测井计算的天然气水合物饱和度与岩心结果一致,平均值为5. 0%。前人研究认为NGHP01-10D钻孔中天然气水合物以相对较高饱和度富集在高角度裂隙中。结合前人研究结果推断在克里希纳-戈达瓦里盆地存在3种不同的天然气水合物储层,即泥岩中砂质夹层各向同性储层、泥质/粉砂质高角度低连通性的低饱和度裂隙储层和泥岩中高角度高连通性的高饱和度裂隙储层,并提出对应的3种天然气水合物储层模型。 相似文献
3.
南海陆坡天然气水合物饱和度估计 总被引：5，自引：0，他引：5
基于双相介质理论和热弹性理论,建立了沉积层纵波速度与天然气水合物饱和度、弹性性质及地层孔隙度之间的关系。通过对比饱和水的理论P波速度与实际P波速度,可以得到天然气水合物饱和度。根据ODP184航次的电阻率、声波速度、密度等测井资料以及地质资料,初步推断南海陆坡存在天然气水合物。根据声波测井的纵波速度估算出南海1146和1148井天然气水合物饱和度分别为孔隙空间的25％～30％和10％～20％,1148井个别沉积层天然气水合物饱和度可达40％～50％。沉积层的纵波速度与饱和水速度差值越大,天然气水合物饱和度越高。 相似文献
4.
Drilling on Hydrate Ridge, offshore Oregon, during ODP Leg 204 enabled us to investigate fabrics of gas hydrate samples in
a wide depth range of the gas hydrate stability zone (GHSZ). X-ray computerized tomographic imaging on whole-round samples,
frozen in liquid nitrogen, revealed that layered gas hydrate structures are related to variable processes occurring at different
sediment depths. Shallow gas hydrates often form layers parallel or sub-parallel to bedding and also crosscut sedimentary
strata and other gas hydrate layers, destroying the original depositional fabric. The dynamic processes interacting with this
complicated plumbing system in this shallow environment are responsible for such highly variable gas hydrate fabrics. Gas
hydrate layers deeper in the sediments are most often dipping with various angles, and are interpreted as gas hydrate precipitates
filling tectonic fractures. These originally open fractures are potential candidates for free gas transportation, and might
explain why free gas can rapidly emanate from below the bottom-simulating reflector through the GHSZ to the seafloor.
Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. 相似文献
5.
Hailong Lu Tatsuji Kawasaki Toshiyasu Ukita Igor Moudrakovski Tetsuya Fujii Satoshi Noguchi Tadaaki Shimada Masaru Nakamizu John Ripmeester Chris Ratcliffe 《Marine and Petroleum Geology》2011,28(10):1801-1805
Except for those occurring at seafloor, most of natural gas hydrate form in sediments and are subject to the influence of sediment. Among these factors, the particle size effect on hydrate saturation level in sediment have been studied with a series of silica sands with various sizes, and the results obtained clearly indicate that particle size does play an important role in affecting the saturation level of hydrate in sediments. The proton relaxation times of water confined in the same series of silica sands, which were determined with NMR measurement, show logarithmic relationship with particle size. By comprehensive consideration of the results of hydrate saturation and water proton relaxation times, the particle size effect observed is tentatively explained by the water availability for hydrate formation in sediments. 相似文献
6.
《Marine and Petroleum Geology》2012,29(10):1801-1805
Except for those occurring at seafloor, most of natural gas hydrate form in sediments and are subject to the influence of sediment. Among these factors, the particle size effect on hydrate saturation level in sediment have been studied with a series of silica sands with various sizes, and the results obtained clearly indicate that particle size does play an important role in affecting the saturation level of hydrate in sediments. The proton relaxation times of water confined in the same series of silica sands, which were determined with NMR measurement, show logarithmic relationship with particle size. By comprehensive consideration of the results of hydrate saturation and water proton relaxation times, the particle size effect observed is tentatively explained by the water availability for hydrate formation in sediments. 相似文献
7.
Pockmarks are observed worldwide along the continental margins and are inferred to be indicators of fluid expulsion. In the present study, we have analysed multibeam bathymetry and 2D/3D seismic data from the south-western Barents Sea, in relation to gas hydrate stability field and sediment type, to examine pockmark genesis. Seismic attributes of the sediments at and beneath the seafloor have been analysed to study the factors related to pockmark formation. The seabed depths in the study area are just outside the methane hydrate stability field, but the presence of higher order hydrocarbon gases such as ethane and/or propane in the expelled fluids may cause localised gas hydrate formation. The selective occurrence of pockmarks in regions of specific seabed sediment types indicates that their formation is more closely related to the type of seabed sediment than the source path of fluid venting such as faults. The presence of high acoustic backscatter amplitudes at the centre of the pockmarks indicates harder/coarser sediments, likely linked to removal of soft material. The pockmarks show high seismic reflection amplitudes along their fringes indicating deposition of carbonates precipitated from upwelling fluids. High seismic amplitude gas anomalies underlying the region away from the pockmarks indicate active fluid flow from hydrocarbon source rocks beneath, which is blocked by overlying less permeable formations. In areas of consolidated sediments, the upward flow is limited to open fault locations, while soft sediment areas allow diffused flow of fluids and hence formation of pockmarks over a wider region, through removal of fine-grained material. 相似文献
8.
Hydro-thermo-chemo and mechanically coupled processes determine hydrate morphology and control gas production from hydrate-bearing sediments. Force balance, together with mass and energy conservation analyses anchored in published data provide robust asymptotic solutions that reflect governing processes in hydrate systems. Results demonstrate that hydrate segregation in clayey sediments results in a two-material system whereby hydrate lenses are surrounded by hydrate-free water-saturated clay. Hydrate saturation can reach ≈2% by concentrating the excess dissolved gas in the pore water and ≈20% from metabolizable carbon. Higher hydrate saturations are often found in natural sediments and imply methane transport by advection or diffusion processes. Hydrate dissociation is a strongly endothermic event; the available latent heat in a reservoir can sustain significant hydrate dissociation without triggering ice formation during depressurization. The volume of hydrate expands 2-to-4 times upon dissociation or CO2CH4 replacement. Volume expansion can be controlled to maintain lenses open and to create new open mode discontinuities that favor gas recovery. Pore size is the most critical sediment parameter for hydrate formation and gas recovery and is controlled by the smallest grains in a sediment. Therefore any characterization must carefully consider the amount of fines and their associated mineralogy. 相似文献
9.
There are two types of gas hydrate-bearing reservoirs in the permafrost area of Qilian Mountain. Most of the gas hydrates occur mainly in the fractured mudstone reservoirs and rarely in the pores of the sandstone reservoirs. In this study, for the acoustic velocity characterization of the fractured gas hydrate reservoirs of the Qilian Mountain permafrost area, some mudstone core samples were collected for physical rock experiments, such as the acoustic experiment and the porosity and permeability experiment. An acoustic velocity numerical simulation of gas hydrate reservoirs was performed according to the Biot theory and the differential effective medium theory, with the conditions of multiple gas hydrate occurrence models, including the suspension model, the semi-cementation model and the cementation model, and considering both infinite and penny-shaped cracks. Fracture porosity was added to the core samples that only contain matrix porosity. With fracture porosity ranging from 0.01% to 5%, the variation laws between acoustic velocity with fractured porosity and hydrate saturation are obtained: (1) In the case of an infinite crack, if the fractured porosity is 0.01%–1%, the P-wave velocity decreases rapidly in the case of the three occurrence models. If the fractured porosity is higher than 1%, the acoustic velocity decreases gradually. If the crack shape is a penny-shaped crack, the P-wave velocity decreases almost linearly with increasing fracture porosity. (2) If the hydrate occurrence model is the suspension model, the P-wave velocity increases slightly with increasing hydrate saturation. If the occurrence model is the semi-cementation model or the cementation model, when the gas hydrate saturation of the infinite crack ranges from 0 to 80%, the acoustic velocity increases approximately linearly, whereas when the gas hydrate saturation ranges from 80% to 100%, the velocity increases rapidly. If the crack is a penny-shaped crack, the velocity increases almost linearly with increasing gas hydrate saturation from 0 to 100%. (3) It is found that the fractured gas hydrate reservoirs of the Qilian Mountain permafrost area contain both penny-shaped and infinite cracks, of which the infinite crack is the main crack shape. The gas hydrate occurrence in the Qilian Mountain permafrost area mainly follows the suspension model. This has significance for the seismic exploration and log evaluation of gas hydrate-bearing fractured reservoirs in the permafrost area of the Qilian Mountain in studying the acoustic velocity characterization, the crack shapes and occurrence models of gas hydrate reservoirs in the study area. 相似文献
10.
M.E. Torres T.S. CollettK.K. Rose J.C. SampleW.F. Agena E.J. Rosenbaum 《Marine and Petroleum Geology》2011,28(2):332-342
The BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled and cored from 606.5 to 760.1 m on the North Slope of Alaska, to evaluate the occurrence, distribution and formation of gas hydrate in sediments below the base of the ice-bearing permafrost. Both the dissolved chloride and the isotopic composition of the water co-vary in the gas hydrate-bearing zones, consistent with gas hydrate dissociation during core recovery, and they provide independent indicators to constrain the zone of gas hydrate occurrence. Analyses of chloride and water isotope data indicate that an observed increase in salinity towards the top of the cored section reflects the presence of residual fluids from ion exclusion during ice formation at the base of the permafrost layer. These salinity changes are the main factor controlling major and minor ion distributions in the Mount Elbert Well. The resulting background chloride can be simulated with a one-dimensional diffusion model, and the results suggest that the ion exclusion at the top of the cored section reflects deepening of the permafrost layer following the last glaciation (∼100 kyr), consistent with published thermal models. Gas hydrate saturation values estimated from dissolved chloride agree with estimates based on logging data when the gas hydrate occupies more than 20% of the pore space; the correlation is less robust at lower saturation values. The highest gas hydrate concentrations at the Mount Elbert Well are clearly associated with coarse-grained sedimentary sections, as expected from theoretical calculations and field observations in marine and other arctic sediment cores. 相似文献
11.
A method is proposed to estimate gas hydrate saturation from three dimensional (3-D) heterogeneous model of resistivity simulated using resistivity log. Pure gas hydrates are highly resistive compared to the host sediments, and their presence in the pore space of sediments increase the resistivity of the formation. The anomalous increase of resistivity is used as a proxy for the delineation of gas hydrates using the resistivity log. A 3-D heterogeneous resistivity model has been constructed from one dimensional resistivity log in Krishna Godavari (KG) basin, eastern Indian offshore. The simulated model contains all small scale variation in resistivity of the reservoir and maintains all properties associated with covariance, like root mean square fluctuation, characteristic scales and fractal dimension of the observed log. We have estimated volumetric hydrate saturation using the three dimensional simulated model. The porosity used for estimating hydrate saturation is calculated from the simulated density field generated using the observed density log. Estimated average gas hydrate saturation is about 9.84% of the pore volume over a 1000 m × 1000 m x 131 m cubic meters area. 相似文献
12.
Presence of gas hydrate and free gas in Iranian part of Makran accretionary prism changes the elastic properties of unconsolidated sediments and produces sharp bottom simulating reflectors (BSRs) which are observed on the 2-D seismic data. Different methods have been applied to estimate the gas hydrate and free gas saturations in marine sediments based on seismic measurements. Most of these methods are based on relating the elastic properties to the hydrate and free gas saturations and remotely estimating their concentration. In this regard, using the effective medium theory (EMT) which was developed for different modes of hydrate distribution is more considered among other rock physics theories. The main concern about saturation estimations based on EMT is that the velocities of the hydrate-bearing sediments primarily depend on how they are distributed within the pore space. Therefore, understanding the modes of hydrate distribution (at least cementing or non-cementing modes) is necessary to decrease the estimation uncertainties.The first intention of paper is to investigate amplitude variation versus offset (AVO) analysis of BSR to determine the hydrate distribution modes. The results from the probable saturation revealed that if the hydrate cements the sediment grains, BSR would show the AVO class IV and if hydrate does not cement the sediment grains, then BSR would show either the AVO class II or class III depending on the free gas saturation just beneath the BSR. The second intention of paper is to introduce some templates called reflectivity templates (RTs) for quantitative study of hydrate resources. These templates are provided based on the EMT to quantify the hydrate and free gas near the BSR. Validation of this approach by synthetic data showed that a reliable quantification could be achieved by intercept-gradient RTs, only if these attributes are determined with a high accuracy and good assumptions are made about the mineralogical composition and porosity of the unconsolidated host sediments. The results of this approach applied to a 2-D marine pre-stack time migrated seismic line showed that less than 10% of the gas hydrate accumulated near to the BSR in anticlinal-ridge type structure of Iranian deep sea sediments. The free gas saturation near to the BSR by assuming a homogeneous distribution was less than 3% and by assuming patchy distribution was about 3–10%. 相似文献
13.
The physics of gas chimney and pockmark formation,with implications for assessment of seafloor hazards and gas sequestration 总被引：2，自引：0，他引：2
Pockmarks form where fluids discharge through seafloor sediments rapidly enough to make them quick, and are common where gas is present in near-seafloor sediments. This paper investigates how gas might lead to pockmark formation. The process is envisioned as follows: a capillary seal traps gas beneath a fine-grained sediment layer or layers, perhaps layers whose pores have been reduced in size by hydrate crystallization. Gas accumulates until its pressure is sufficient for gas to invade the seal. The seal then fails completely (a unique aspect of capillary seals), releasing a large fraction of the accumulated gas into an upward-propagating gas chimney, which displaces water like a piston as it rises. Near the seafloor the water flow causes the sediments to become “quick” (i.e., liquefied) in the sense that grain-to-grain contact is lost and the grains are suspended dynamically by the upward flow. The quickened sediment is removed by ocean-bottom currents, and a pockmark is formed. Equations that approximately describe this gas–piston–water-drive show that deformation of the sediments above the chimney and water flow fast enough to quicken the sediments begins when the gas chimney reaches half way from the base of its source gas pocket to the seafloor. For uniform near-surface sediment permeability, this is a buoyancy control, not a permeability control. The rate the gas chimney grows depends on sediment permeability and the ratio of the depth below seafloor of the top of the gas pocket to the thickness of the gas pocket at the time of seal failure. Plausible estimates of these parameters suggest gas chimneys at Blake Ridge could reach the seafloor in less than a decade or more than a century, depending mainly on the permeability of the deforming near-surface sediments. Since these become quick before gas is expelled, gas venting will not provide a useful warning of the seafloor instabilities that are related to pockmark formation. However, detecting gas chimney growth might be a useful risk predictor. Any area underlain by a gas chimney that extends half way or more to the surface should be avoided. 相似文献
14.
南海东沙海域天然气水合物与地质构造的关系 总被引：4，自引：0，他引：4
构造作用和构造过程是控制天然气水合物发育和赋存的重要地质因素之一。陆坡区复杂的构造运动能够形成良好的气体运移通道以及欠压实、高孔隙的水合物储集空间。东沙群岛邻近海域具有水深变化大、沉积厚度大、沉积速率高和有机质丰富等天然气水合物有利赋存条件,最新的研究已经在该海域发现了天然气水合物赋存的地球物理证据BSR,针对东沙群岛海域广泛发育的断裂、底辟、海底滑坡等构造,开展了其与天然气水合物成藏的关系研究,可以进一步深入了解天然气水合物在东沙群岛不同地质构造中的分布特征与演化,为该区天然气远景评估提供参考。 相似文献
15.
T. Feseker T. Pape K. Wallmann S.A. Klapp F. Schmidt-Schierhorn G. Bohrmann 《Marine and Petroleum Geology》2009
The sediment temperature distribution at mud volcanoes provides insights into their activity and into the occurrence of gas hydrates. If ambient pressure and temperature conditions are close to the limits of the gas hydrate stability field, the sediment temperature distribution not only limits the occurrence of gas hydrates, but is itself influenced by heat production and consumption related to the formation and dissociation of gas hydrates. Located in the Sorokin Trough in the northern Black Sea, the Dvurechenskii mud volcano (DMV) was in the focus of detailed investigations during the M72/2 and M73/3a cruises of the German R/V Meteor and the ROV Quest 4000 m in February and March 2007. A large number of in-situ sediment temperature measurements were conducted from the ROV and with a sensor-equipped gravity corer. Gas hydrates were sampled in pressurized cores using a dynamic autoclave piston corer (DAPC). The thermal structure of the DMV suggests a regime of fluid flow at rates decreasing from the summit towards the edges of the mud volcano, accompanied by intermittent mud expulsion at the summit. Modeled gas hydrate dissociation temperatures reveal that the gas hydrates at the DMV are very close to the stability limits. Changes in heat flow due to variable seepage rates probably do not result in changes in sediment temperature but are compensated by gas hydrate dissociation and formation. 相似文献
16.
According to the preliminary geological data of gas hydrate bearing-sediments (GHBS) at site GMGS3-W19 in the third Chinese expedition to drill gas hydrates in 2015, a production model using three different recovery pressures was established to assess the production feasibility from both production potential and geomechanical response. The simulation results show that for this special Class 1 deposit, it is a little hard for gas production rate to reach the commercial extraction rate because the degree of hydrate dissociation is limited due to the low reservoir permeability and the permeable burdens. However, the free gas accumulating in the lower part of the GHBS can significantly increase gas-to-water ratio. It also generates many secondary hydrates in the GHBS at the same time. Decreasing the well pressure can be beneficial to gas recovery, but the recovery increase is not obvious. In term of geomechanical response of the reservoir during the gas recovery, the permeable burdens are conducive to reduction of the sediment deformation, though they don't facilitate the gas recovery rate. In addition, significant stress concentration is observed in the upper and lower edges of GHBS around the borehole during depressurization because of high pressure gradient, and the greater the well pressure drop, the more obvious the phenomenon. Yield failures and sand production easily take place in the edges. Therefore, in order to achieve the purpose of safe, efficient and long-term gas production, a balance between the production pressure and reservoir stability should be reached at the hydrate site. The production pressure difference and sand production must be carefully controlled and the high stress concentration zones need strengthening or sand control treatment during gas production. Besides, the sensitivity analyses show that the hydrate saturation heterogeneity can affect the production potential and geomechanical response to some extent, especially the water extraction rate and the effective stress distribution and evolution. Increasing GHBS and its underlying free gas formation permeabilities can enhance the gas production potential, but it probably introduces geomechanical risks to gas recovery operations. 相似文献
17.
Muri Basin in the Qilian Mountain is the only permafrost area in China where gas hydrate samples have been obtained through scientific drilling. Fracture-filling hydrate is the main type of gas hydrate found in the Qilian Mountain permafrost. Most of gas hydrate samples had been found in a thin-layer-like, flake and block group in a fracture of Jurassic mudstone and oil shale, although some pore-filling hydrate was found in porous sandstone. The mechanism for gas hydrate formation in the Qilian Mountain permafrost is as follows: gas generation from source rock was controlled by tectonic subsidence and uplift--gas migration and accumulation was controlled by fault and tight formation--gas hydrate formation and accumulation was controlled by permafrost. Some control factors for gas hydrate formation in the Qilian Mountain permafrost were analyzed and validated through numerical analysis and laboratory experiments. CSMGem was used to estimate the gas hydrate stability zone in the Qilian permafrost at a depth of 100–400 m. This method was used to analyze the gas composition of gas hydrate to determine the gas composition before gas hydrate formation. When the overlying formation of gas accumulation zone had a permeability of 0.05 × 10−15 m2 and water saturation of more than 0.8, gas from deep source rocks was sealed up to form the gas accumulation zone. Fracture-filling hydrate was formed in the overlap area of gas hydrate stability zone and gas accumulation zone. The experimental results showed that the lithology of reservoir played a key role in controlling the occurrence and distribution of gas hydrate in the Qilian Mountain permafrost. 相似文献
18.
Emily V.L. Rees Jeffery A. Priest Chris R.I. Clayton 《Marine and Petroleum Geology》2011,28(7):1283-1293
The Indian National Gas Hydrate Program (NGHP) Expedition 1, of 2006, cored through several methane gas hydrate deposits on the continental shelf around the coast of India. The pressure coring techniques utilized during the expedition (HYACINTH and PCS) enabled recovery of gas hydrate bearing, fine-grained, sediment cores to the surface. After initial characterization core sections were rapidly depressurized and submerged in liquid nitrogen, preserving the structure and form of the hydrate within the host sediment. Once on shore, high resolution X-ray CT scanning was employed to obtain detailed three-dimensional images of the internal structure of the gas hydrate. Using a resolution of 80 μm the detailed structure of the hydrate veins present in each core could be observed, and allowed for an in depth analysis of orientation, width and persistence of each vein. Hydrate saturation estimates could also be made and saturations of 20-30% were found to be the average across the core section with some portions showing highs of almost 60% saturation. The majority of hydrate veins in each core section were found to be orientated between 50 and 80° to the horizontal. Analysis of the strikes of the veins suggested a slight preferential orientation in individual sample sections, although correlation between individual sections was not possible due to the initial orientation of the sections being lost during the sampling stage. The preferred vein orientation within sample sections coupled with several geometric features identified in individual veins, suggest that hydraulic fracturing by upward advecting pore fluids is the main formation mechanism for the veined hydrate deposits in the K-G Basin. 相似文献
19.
珠江口盆地神狐海域是天然气水合物钻探和试验开采的重点区域,大量钻探取心、测井与地震等综合分析表明不同站位水合物的饱和度、厚度与气源条件存在差异。本文利用天然气水合物调查及深水油气勘探所采集的测井和地震资料建立地质模型,利用PetroMod软件模拟地层的温度场、有机质成熟度、烃源岩生烃量、流体运移路径以及不同烃源岩影响下的水合物饱和度,结果表明:生物成因气分布在海底以下1500 m范围内的有机质未成熟地层,而热成因气分布在深度超过2300 m的成熟、过成熟地层。水合物稳定带内生烃量难以形成水合物,形成水合物气源主要来自于稳定带下方向上运移的生物与热成因气。模拟结果与测井结果对比分析表明,稳定带下部生物成因气能形成的水合物饱和度约为10%,在峡谷脊部的局部区域饱和度较高;相对高饱和度(>40%)水合物形成与文昌组、恩平组的热成因气沿断裂、气烟囱等流体运移通道幕式释放密切相关,W19井形成较高饱和度水合物的甲烷气体中热成因气占比达80%,W17井热成因气占比为73%,而SH2井主要以生物成因为主,因此,不同站位甲烷气体来源占比不同。 相似文献
20.
冲绳海槽天然气水合物与地质构造的关系 总被引：7，自引：0，他引：7
海底天然气水合物大多与通过切穿沉积盖层的断裂的上升烃类流体相关,这些高渗透带包括底辟和泥火山等侵入构造,所以海底断裂、底辟和泥火山等构造周围可能赋存天然气水合物;其次,高沉积速率和巨厚沉积层可使有机质迅速掩埋而保存起来,为天然气水合物的生成提供充足物源,因此,邻近陆坡河谷口的海底沉积扇也是天然气水合物赋存的有利地区;另外,由于陆坡区的水合物沉积层比海盆更容易受外界温压变化的影响发生失稳分解,诱发海底滑坡,所以滑坡与天然气水合物赋存之间的关系也非常密切。冲绳海槽邻近海域具有覆水深、沉积厚度大、沉积速率高和有机质丰富等有利赋存条件,目前的研究已经在该海域发现了天然气水合物赋存的地球物理证据BSR,因此,在现有研究基础上开展断裂、泥火山、海底扇、海底滑坡等与天然气水合物相关的构造研究,可以深入了解天然气水合物在不同地质构造中的分布特征与演化,为更精确地评估其资源潜力提供参考。 相似文献