共查询到20条相似文献，搜索用时 175 毫秒
1.
The computational fluid dynamics study is performed to analyze the impact of the cultured fish on the flow field through net cage and the deformation of net cage. The shear stress turbulent k-omega model is applied to simulate the flow field through the net cage, and the large deformation nonlinear structure model is adopted to conduct the structural analysis of the flexible net cage. To validate the net-fluid interaction model of the net cage in current, a series of physical model tests are conducted, which indicate that the numerical model can accurately simulate the flow field around the net cage and the deformation of the net cage. A fish model is used to simulate the effect of fish behavior on the flow pattern around the net cage and the deformation of the net cage. In addition, the flow fields around the net cage in current are investigated considering different fish group structures, fish swimming speeds, fish distributions and fish stocking densities. The results indicate that the circular movement of fish in the still water leads to a low pressure zone at the center of net cage, which causes a strong vertical flow along the center line of the net cage. The drag force on the net cage is significantly decreased with the increasing fish stocking density, but the most severe deformation of net cage occurred in the case of medium fish stocking density. 相似文献
2.
由于沿海区域的限制以及愈加严重的环境污染,渔业养殖正从近海走向深远海。深远海海域的海况更加恶劣,给养殖装备的设计与性能评估带来新的挑战。为解决该问题,对极端波浪与养殖装备网衣结构的相互作用开展研究。基于waves2Foam建立数值波浪水池,极端波浪模拟采用基于NewWave理论的聚焦波模型,网衣结构模拟采用多孔介质模型,并通过与Morison模型计算的网衣受力等效分析,获得多孔介质模拟网衣结构阻力系数的直接估计方法。然后将多孔介质模型嵌入waves2Foam中,开展聚焦波与网衣结构相互作用的数值模拟,同时开展水槽试验,验证数值模拟的准确性。基于数值模拟结果,系统地分析了不同网衣密实度及不同波浪参数下网衣结构的升阻力特性以及网衣结构对波浪场的扰动规律。研究表明：聚焦波波峰幅值和网衣密实度对网衣结构的升阻力影响较大,且升力峰值出现在阻力为0的时刻;网衣结构对聚焦波的时空演化特性有影响,改变了聚焦波波形。 相似文献
3.
《中国海洋工程》2015,(3)
The effect of biofouling on the hydrodynamic characteristics of the net cage is of particular interest as biofouled nettings can significantly reduce flow of well-oxygenated water reaching the stocked fish. For computational efficiency, the porous-media fluid model is proposed to simulate flow through the biofouled plane net and full-scale net cage. The porous coefficients of the porous-media fluid model can be determined from the quadratic-function relationship between the hydrodynamic forces on a plane net and the flow velocity using the least squares method. In this study, drag forces on and flow fields around five plane nets with different levels of biofouling are calculated by use of the proposed model. The numerical results are compared with the experimental data of Swift et al.(2006) and the effectiveness of the numerical model is presented. On that basis, flow through full-scale net cages with the same level of biofouling as the tested plane nets are modeled. The flow fields inside and around biofouled net cages are analyzed and the drag force acting on a net cage is estimated by a control volume analysis method. According to the numerical results, empirical formulas of reduction in flow velocity and load on a net cage are derived as function of drag coefficient of the corresponding biofouled netting. 相似文献
4.
The effect of biofouling on the hydrodynamic characteristics of the net cage is of particular interest as biofouled nettings can significantly reduce flow of well-oxygenated water reaching the stocked fish. For computational efficiency, the porous-media fluid model is proposed to simulate flow through the biofouled plane net and full-scale net cage. The porous coefficients of the porous-media fluid model can be determined from the quadratic-function relationship between the hydrodynamic forces on a plane net and the flow velocity using the least squares method. In this study, drag forces on and flow fields around five plane nets with different levels of biofouling are calculated by use of the proposed model. The numerical results are compared with the experimental data of Swift et al. (2006) and the effectiveness of the numerical model is presented. On that basis, flow through full-scale net cages with the same level of biofouling as the tested plane nets are modeled. The flow fields inside and around biofouled net cages are analyzed and the drag force acting on a net cage is estimated by a control volume analysis method. According to the numerical results, empirical formulas of reduction in flow velocity and load on a net cage are derived as function of drag coefficient of the corresponding biofouled netting. 相似文献
5.
水流作用下渔网养殖空间变化的计算方法 总被引：1，自引：0，他引：1
渔网的动力分析是养殖网箱设计和优化的基础。通过把一系列杆相互铰接在一起,建立网的模型,模拟网在来流作用下的变形。作用在杆上的水动力可以通过Morison公式来计算,采用有限单元的离散方法,并利用网目合并的方法来减少总的自由度数目。模型的计算结果同试验成果做了对比,计算与试验在柔性网的变形方面,结果吻合良好。 相似文献
6.
Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow 总被引：11，自引：0，他引：11
1IntroductionThe fish farming and aquaculture industry areexpanding and the demand for suitable locations forfish farms is increasing.In the future,more of thefish farms will be located offshore,as the number ofsuitable nearshore locations is limited.Futu… 相似文献
7.
通过三维物理模型系列试验,对港珠澳大桥工程西人工岛、岛桥结合跨进行模拟。试验测量了不同波浪入射角度、波高、波周期以及梁底净高等影响因子下的岛桥结合跨箱梁所受的浮托力和水平力,分析了受力随波陡、相对梁底作用高度以及波浪入射角度的变化规律。研究表明,在一定条件下箱梁浮托力和水平力,随波陡的增大而减小,随梁底相对作用高度的增加而增大,波浪入射方向的影响主要表现为与箱梁沿波浪传播方向的有效长度相关。由于岛桥结合跨的特殊性,改进的Douglass公式并不适用于岛桥结合跨箱梁受力的计算。通过主要影响因子的量纲分析,建立针对岛桥结合跨箱梁浮托力和水平力的计算公式。研究成果可为今后同类工程以及数值模拟提供借鉴与参考。 相似文献
8.
平面无结节网衣水阻力系数的试验研究 总被引：2，自引：0，他引：2
通过物理模型试验,统计分析得到了无结节网衣的水阻力系数在不同状态下随雷诺数、倾角和布置状态的变化规律,并通过网衣沉子的组合试验验证了所得经验公式的正确性和适用性,为深水网箱等渔具的水动力计算提供了依据. 相似文献
9.
渔网水动力试验研究及分析 总被引：16，自引：1，他引：16
根据流体力学实验结果 ,研究了雷诺数 ,网的密实度 ,网型以及流向等对网的阻力影响 ,同时讨论了侧向力问题 ,对同样网面积的平面网及圆型网的阻力进行了比较 ,结果圆型网阻力较小。 相似文献
10.
The impact of parameterized topographic internal lee wave drag on the input and output terms in the total mechanical energy budget of a hybrid coordinate high-resolution global ocean general circulation model forced by winds and air-sea buoyancy fluxes is examined here. Wave drag, which parameterizes the generation of internal lee waves arising from geostrophic flow impinging upon rough topography, is included in the prognostic model, ensuring that abyssal currents and stratification in the model are affected by the wave drag.An inline mechanical (kinetic plus gravitational potential) energy budget including four dissipative terms (parameterized topographic internal lee wave drag, quadratic bottom boundary layer drag, vertical eddy viscosity, and horizontal eddy viscosity) demonstrates that wave drag dissipates less energy in the model than a diagnostic (offline) estimate would suggest, due to reductions in both the abyssal currents and stratification. The equator experiences the largest reduction in energy dissipation associated with wave drag in inline versus offline estimates. Quadratic bottom drag is the energy sink most affected globally by the presence of wave drag in the model; other energy sinks are substantially affected locally, but not in their global integrals. It is suggested that wave drag cannot be mimicked by artificially increasing the quadratic bottom drag because the energy dissipation rates associated with bottom drag are not spatially correlated with those associated with wave drag where the latter are small. Additionally, in contrast to bottom drag, wave drag is a non-local energy sink.All four aforementioned dissipative terms contribute substantially to the total energy dissipation rate of about one terawatt. The partial time derivative of potential energy (non-zero since the isopycnal depths have a long adjustment time), the surface advective fluxes of potential energy, the rate of change of potential energy due to diffusive mass fluxes, and the conversion between internal energy and potential energy also play a non-negligible role in the total mechanical energy budget. Reasons for the <10% total mechanical energy budget imbalance are discussed. 相似文献
11.
Model experiments of a floating fish cage subjected to waves and current have been performed. The objective was to study the dynamic behaviour of the fish cage model in waves and current. The fish cage model was composed of a model net, a flexible floating collar of the circular plastic type and a weight system. It was found that there are many wave periods in which cancellation of the wave-induced forces on the model occur. These cancellation wave periods are within the range of dimensioning wave periods commonly used for testing of fish farm structures and hence are important to be aware of. Large deformations of the net under realistic wave and current conditions were observed, where contact between the net and other parts of the structure were identified. This may cause damages to the net due to abrasion. 相似文献
12.
The spectral properties of nonlinear drag forces of random waves on vertical circular cylinders are analyzed in this paper by means of nonlinear spectral analysis. The analysis provides basic parameters for estimation of the characteristic drag forces. Numerical computation is also performed for the investigation of the effects of nonlinearity of the drag forces.The results indicate that the wave drag forces calculated by linear wave theory are larger than those calculated by the third order Stokes wave theory for given waves. The difference between them increases with wave height. The wave drag forces calculated by use of hnear approximation are about 5% smaller than their actual values when measured in the peak values of spectral densities. This will result in a safety problem for the design of offshore structures. Therefore, the nonlinear effect of wave drag forces should be taken into comidemtion in design and application of important offshore structures. 相似文献
13.
A series of model tests were performed to investigate the behavior of vertical pressure imposed on the bottom of a trench. The tests were conducted in two phases to generate soil arching due to soil deformation: (1) the backfilling phase and (2) the lowering-bottom phase. First, the backfilling phase was performed by filling sand into the trench, in which soil deformation was developed due to selfcompaction by the weight of the sand. The lowering-bottom phase was then conducted by lowering the bottom plate of the trench to induce additional soil deformation. The behavior of the vertical pressure acting on the bottom of the trench during the backfilling phase can simulate that of the vertical pressure imposed on the bottom of buried rigid pipes. The behaviors of buried flexible pipes could be observed during the lowering-bottom phase, in which both the minimum and the maximum vertical pressures could be obtained according to the induced soil deformation. A novel method for predicting the vertical pressures in each phase was proposed. The agreements between the predictions by the proposed method and the experimental results were demonstrated. 相似文献
14.
The Wake II model for the determination of the hydrodynamic forces on marine pipelines is extended to include currents and waves. There are two main differences between the Wake II and the traditional model. First, in the Wake II model the velocity is modified to include the pipe's encounter with the wake flow when the velocity reverses. Second, the model uses time dependent drag and lift coefficients. The flow field is assumed to be the linear superposition of regular waves and uniform current and is treated as wave only but in two different phases. The model requires eight empirical parameters that are obtained from comparisons with field data for various Keulegan–Carpenter numbers and current to wave ratios. The effective velocity and the force predictions are compared with field data from Exxon Production Research Company and with the conventional model. The model gives satisfactory results and predicts lift forces that in shape, magnitude and phase relative to the velocity are in very close agreement with measured forces. For the horizontal forces the results are very accurate. A substantial improvement is obtained over the predictions with the conventional model. This work is applicable to the design of submarine pipelines laying on the sea bottom in water depths where waves or waves and currents contribute to the hydrodynamic forces. 相似文献
15.
The research into hydrodynamic loading on ocean structures has concentrated mostly on circular cross-section members and relatively limited work has been carried out on wave loading on other cross-sections such as rectangular sections. These find applications in many offshore structures as columns and pontoons in semi-submersibles and tension-leg platforms. The present investigation demonstrates the behaviour of rectangular cylinders subject to wave loading and also supplies the hydrodynamic coefficients for the design of these sections.This paper presents the results of wave forces acting on a surface piercing truncated rectangular cylinder set vertically in a towing tank. The experiments are carried out in a water depth of 2.2 m with regular and random waves for low Keulegan–Carpenter number up to 6. The rectangular cylinder is of 2 m length, 0.2 m breadth and 0.4 m width with a submergence depth of 1.45 m from still water level. Based on Morison equation, the relationship between inertia and drag coefficients are evaluated and are presented as a function of KC number for various values of frequency parameter β, for two aspect ratios of cylinders, equals to 1/2 and 2/1. Drag and inertia coefficients obtained through regular wave tests are used for the random wave analysis to compute the in-line force spectrum.The results of the experiments show the drag and inertia coefficients are strongly affected by the variation in the aspect ratios of the cylinder. The drag coefficients decreases and inertia coefficients increases with increase in Keulegan–Carpenter number up to the range of KC number tested. The random wave results show a good correlation between measured and computed force spectrums. The transverse forces in both regular and random waves are found to be small compared to in-line forces. 相似文献
16.
A tower hinged at the bottom was oscillated mechanically in a sinusoidal fashion in a plane in still water. An instrumented section in the tower measured the inline and transverse forces locally on the tower due to the hydrodynamic effects. These forces are analyzed for the added mass, drag and lift coefficients which are presented as functions of Keulegan-Carpenter and Reynolds number. The lift force frequencies are also investigated. The measured overall reactions on the tower are used to verify the values of the local coefficients. The results presented here are not only applicable to articulated towers but to other moving elements of an offshore structure, e.g. risers, tension-legs, etc. 相似文献
17.
On the role of bottom roughness in overflows 总被引：4，自引：3，他引：1
Overflows play an important role in the downwelling limb of the oceanic thermohaline circulation. In light of the recognition that some overflows are not homogenous but exhibit a vertical density structure, and details of topography influence the pathways of some overflows, the impact of topographic roughness on the product property distribution is explored using the 3D non-hydrostatic spectral element model Nek5000. Numerical experiments are carried out by varying bottom roughness amplitude and ambient stratification parameters, in a regime where equilibrated product water masses are formed in a non-rotating environment.Our main finding is that bottom roughness can influence the overflow product distribution such that the highest salinity classes are removed and neutral buoyancy level is attained higher up in the stratified ambient water column. It is also shown that the form drag coefficients in overflows over rough bottom can be much larger than the skin drag coefficient over smooth bottom. To our knowledge, form drag has never been measured in oceanic overflows. As such, these numerical experiments imply that such measurements would be useful for a better understanding of overflow dynamics. It is also found that the ratio of source and product overflow mass transports is robust to changes in bottom roughness. This appears to happen because the distribution of entrainment is totally different in the case of rough bottom. Entrainment tends to initiate earlier (due to vertical motion induced by topography) and terminate earlier (due to development of form drag) than that over smooth topography. 相似文献
18.
G. D. Hahn 《Ocean Engineering》1995,22(1)
Concepts are developed which lead to an improved understanding of the characteristics of the wave forces that act on deep-water, jacket-type offshore structures. These concepts are the result of comprehensive examinations of both the inertia and the drag force components of the wave excitation. It is shown that, under conditions which are of practical importance, the resultants of the inertia and drag force components can both be expressed in terms of the motion of the sea surface. Fundamental modal forces which govern fundamental modal responses for offshore structures are also examined, and the relationships between these modal forces and the resultants of the inertia and drag force components are established. The structural response itself is further examined, and valuable information is developed which is believed to be of practical importance. 相似文献
19.
In this paper, a time-domain numerical model is established for computing the action of internal solitary wave on marine structures and structure motion responses. For a cylindrical structure, its side and bottom are discretized by pole and surface elements, respectively. The drag and inertial forces in the perpendicular direction of the structure are computed by the Morison equation from the pole elements, and the Froude–Krylov force in the axial direction of the structure due to internal wave motion is computed by integration of the dynamic pressure over the surface elements. The catenary theory is used to analyze the reaction force due to mooring lines, and the motion equation of the marine structure is solved by the fourth-order Runge–Kutta method in the time domain. The model is used to calculate the interaction of the internal solitary wave with a Spar platform with mooring system, and the surface wave action with the platform has also been computed by a frequency-domain boundary element method for comparison. Through the comparison based on a practical internal wave and surface wave states, it can be concluded that the internal wave force on the structure is only 9% of the one due to surface waves. However, the motion response due to the internal wave is much greater than the one due to the surface waves. It shows that the low-frequency effect of internal solitary waves is a great threat to the safety of marine structures. 相似文献
20.
A numerical study on dynamic properties of the gravity cage in combined wave-current flow 总被引：2，自引：0，他引：2
Yun-Peng Zhao Yu-Cheng Li Guo-Hai Dong Fu-Kun Gui Bin Teng 《Ocean Engineering》2007,34(17-18):2350-2363
Recent work in the area of open-ocean aquaculture-system dynamics has focused either on the response of fish cages in waves or the steady drag response from ocean currents, not on them combined. In reality, however, the forces bearing on these open-ocean structures are a nonlinear, multidirectional combination of both waves and current profiles. In this paper, a numerical model has been developed to simulate the dynamic response of the gravity cage to waves combined with currents. When current flows are combined with regular waves, gravity-cage motion response (including heave, surge, and pitch) and mooring-line forces have been calculated. To examine the validity of simulated results, a series of physical model tests have been carried out. The results of our numerical simulation are all in close agreement with the experimental data. 相似文献