共查询到20条相似文献，搜索用时 109 毫秒
1.
通过分析AQ4500型浊度计的示值误差的检测结果,介绍了浊度仪的检测结果的不确定度评定方法,具体分析了各个不确定度分量的产生,并合成标准不确定度。 相似文献
2.
在海道测量中,由于无法对测量数据进行多余和重复观测,因而不能精确测定各种误差,同时也几乎没有测量成果质量的控制指标,这正是多波束测深数据质量评估所面临的现实且急需解决的难题。基于国际海道测量规范S-44(5th)的要求,研究了不确定度在多波束数测深数据质量评估中的应用。通过实例分析可知,测量结果的可用性在很大程度上取决于其不确定度的大小,不确定度越小,说明测量结果质量越高,越具有可靠性。因此,将不确定度充分合理地应用于多波束测深数据处理和评估是一种最为理想的途径。 相似文献
3.
测量不确定度在法制计量工作中得到广泛的应用,就如何在计量器具示值误差的符合性评定工作中的具体实施进行了阐述. 相似文献
4.
5.
电热板加热消解法和微波消解法是目前海洋沉积物样品消解的常用方法。为了比较这两种处理方法对检测结果准确性的影响程度,文章依据《测量不确定度的评定与表示》技术规定中的相关要求对海洋沉积物中铜含量测定过程中采取的两种消解方法进行了不确定度评定与对比,建立了模型,并对各不确定度分量进行分析和量化,计算出两种消解方法测量沉积物中铜含量的相对合成不确定度分别为0.06721和0.04033,扩展不确定度分别为4.0mg/kg和2.4mg/kg。通过比较两种消解方法对测定结果不确定度的贡献,发现微波消解法明显优于电热板加热法。 相似文献
6.
文章依据JJG(海洋)01-1994《海洋资料浮标传感器检定规程》[1]、JJG860-1994《压力传感器(静态)检定规程》以及2013年8月13日最新实施的JJG1084-2013《数字式气压计检定规程》,结合海洋环境监测站和海洋资料浮标的海洋环境自动观测系统设备现场校准工作,研究总结了应用0.02级数字式气压计在现场校准0.1级气压传感器的校准方法,并在实际工作中得到使用,结果准确可靠。依据JJF1059-1999《测量不确定度评定与表示》,运用测量结果不确定度评定与表示方法,对测量结果不确定度进行了评定。符合条件要求的测量结果,一般可参照使用本不确定度的评定方法。 相似文献
7.
8.
为全面准确地评定GNSS(Global Navigation Satellite System)海洋浮标测得瞬时海面高程的动态不确定度,根据GNSS海洋浮标的工作原理、系统组成及数据处理方法,提出了针对具体测量过程的瞬时海面高程动态不确定度评定方法。将浮标动态测量过程分解为静态测量过程的集合,采用GUM(Guide to the Expression of Uncertainty in Measurement)方法建立了测量模型,详细分析和计算了静态测量过程中瞬时海面高程的不确定度分量:GNSS高程不确定度、GNSS天线高程改正不确定度和高程异常不确定度,最后合成瞬时海面高程的动态标准不确定度和动态扩展不确定度。使用该方法对近海GNSS浮标测量结果进行了动态不确定度评定,验证了此方法的可行性,也为评价GNSS浮标测量结果质量提供了有效依据。 相似文献
9.
电位测定法测海水氧化还原电位的不确定度评定 总被引：2，自引：0，他引：2
采用电位测定法对实际海水的氧化还原电位进行测定,分析了影响测量不确定度的主要来源,对曲线拟合、测定过程的标准溶液的使用、仪器使用和测量重复性等影响不确定度的分量进行分析,按JJF1059—1999《测量不确定度评定与表示》的规定进行合成,最终给出扩展不确定度。结果表明,实际海水电位值的合成标准不确定度为14.18 mV,扩展不确定度为28.4 mV(近似95%置信概率)。这样结果的表达更加客观和真实,更具有参考意义。 相似文献
10.
11.
计量检定和海上标校试验是目前船载观测设备在室内和室外开展测量精度评价的2种常用手段。为进一步推进我国计量检定和海上试验建设发展,文章系统归纳和总结室内计量检定和海上标校试验的原理、特点和工作现状,分析当前各自存在的问题,并提出具体建议。研究结果表明：军、地对于船载观测设备计量检定和海上标校试验的需求越来越迫切,我国虽已基本建成海洋设备计量技术规范体系,并强化海试全过程的质量控制,但仍存在计量标准、评价体系、维修保障和室外检定手段不足,海上试验环境和比测精度不确定以及缺少标准化海上试验设施和平台等问题;计量检定机构应综合分析计量要素的特点、社会效益和难易程度等,研究并制定行之有效的标准规范和保障措施;还应充分发挥海上试验的综合检验评价功能,研究完善比测校准方法,建设标准化的海上试验设施和平台。 相似文献
12.
Akira Shibata 《Journal of Oceanography》2006,62(3):351-359
A wind speed retrieval algorithm was developed using 6 and 10 GHz h-pol (6H and 10H) data of the Advanced Microwave Scanning
Radiometer (AMSR) aboard the Advanced Earth Observation Satellite-II (ADEOS-II) and AMSR-E aboard AQUA, for the purpose of
retrieving wind speed inside rainstorms, primarily hurricanes and typhoons. The h-pol was used rather than the v-pol, because
the brightness temperature sensitivity to the ocean wind at h-pol is larger than v-pol. The microwave emission change of 6H
and 10H corresponding to ocean wind was evaluated in no-rain areas by combining AMSR and SeaWinds data aboard the ADEOS-II
(SeaWinds was NASA’s scatterometer), and it was found that the ratio of the two 6H to 10H increments due to ocean wind is
0.9. Assuming that this result also holds with higher wind speeds and under rainy conditions, the brightness temperatures
at 6H and 10H were simulated using a microwave radiative transfer model. A parameter W6 (unit; Kelvin) was then defined, representing
an increment at 6H due to ocean wind. W6 is applicable to rainy areas, and to all ranges of sea surface temperature. W6 was
compared with wind speed reported by the National Hurricanes Center for several hurricanes in the Western Atlantic Ocean during
three years (2002 to 2004). W6 averaged around centers of hurricanes was found to exhibit a sensitivity to wind speed, such
as increasing from 22 K to 65 K as the wind speed rose from 65 to 140 knots (33 to 72 m/s), and an empirical relationship
relating the averaged W6 to wind speed in hurricanes was derived. 相似文献
13.
精确获取剖面风数据对海上风电场规划选址、风能资源评估等至关重要。针对测风塔建设成本高、拆卸移动困难,而传统浮标电源供给较小、摇晃角度大等缺点,设计一种新型激光雷达浮标,实现了对目标海域的风资源剖面数据的观测、解算与自存储。在南海海域进行海试应用,并对观测的剖面风数据和传统大型海洋资料浮标风数据进行同步比测分析。结果表明,激光雷达测风浮标的测量结果与大型浮标测风数据吻合较好,风速R~2相关系数达到0.975,风向R~2相关系数达到0.932。该研究成果可为激光雷达测风浮标在海上风电开发和开展风场变化的科学研究等提供参考。 相似文献
14.
This paper evaluates the impact of using different wind field products on the performance of the third generation wave model SWAN in the Black Sea and its capability for predicting both normal and extreme wave conditions during 1996. Wind data were obtained from NCEP CFSR, NASA MERRA, JRA-25, ECMWF Operational, ECMWF ERA40, and ECMWF ERA-Interim. Wave data were obtained in 1996 at three locations in the Black Sea within the NATO TU-WAVES project. The quality of wind fields was assessed by comparing them with satellite data. These wind data were used as forcing fields for the generation of wind waves. Time series of predicted significant wave height (Hmo), mean wave period (Tm02), and mean wave direction (DIR) were compared with observations at three offshore buoys in the Black Sea and its performance was quantified in terms of statistical parameters. In addition, wave model performance in terms of significant wave height was also assessed by comparing them against satellite data.The main scope of this work is the impact of the different available wind field products on the wave hindcast performance. In addition, the sensitivity of wave model forecasts due to variations in spatial and temporal resolutions of the wind field products was investigated. Finally, the impact of using various wind field products on predicting extreme wave events was analyzed by focussing on storm peaks and on an individual storm event in October 1996. The numerical results revealed that the CFSR winds are more suitable in comparison with the others for modelling both normal and extreme events in the Black Sea. The results also show that wave model output is critically sensitive to the choice of the wind field product, such that the quality of the wind fields is reflected in the quality of the wave predictions. A finer wind spatial resolution leads to an improvement of the wave model predictions, while a finer temporal resolution in the wind fields generally does not significantly improve agreement between observed and simulated wave data. 相似文献
15.
本文给出了一种从ＳＡＳＳ测量的后向散射强度手数据中反演出大尺度海洋风场的新方法。计算结果与Ｐｅｔｅｈｅｒｙｃｈ等利用ＳＡＳＳ表面风分析的结果比较在风向上是吻合的，在风速上本文所得结果更宇海面赵实风速。上述结果说明本文所采用的多解排除对两波束散射计探测海面风场的反演是成功的。 相似文献
16.
17.
18.
B.J. Kim 《Ocean Engineering》2011,38(10):1130-1140
The aim of this paper is to study the feasibility of a computational fluid dynamics (CFD) method to examine the effect of wind on the thermal-diffusion characteristics of floating production storage and offloading (FSPO) topside models subject to fire. It is motivated by the need to identify the fire loads on FPSO topsides, taking into account the effects of wind speed and direction as well as the effects of geometry of the FPSO topsides. The results of a wind-tunnel test and CFD simulation undertaken for these purposes on a 1/14-scale FPSO topside model of a VLCC class FPSO unit are reported here. In the wind-tunnel test, the locations of the heat source of the fire are varied, as are the speed and direction of the wind, and the temperature distribution is measured. CFD simulations, using the ANSYS CFX (2009) program, were performed on the test model, with the results compared with the experimental results. It is concluded that wind has a significant effect on the thermal-diffusion characteristics of the test model and that the CFD simulations are in good agreement with the experimental results. The insights developed in this study will be very useful for the fire engineering of FPSO topsides. 相似文献
19.
20.
For more and more applications in coastal and offshore engineering, numerical simulations of waves and surges are required. An important input parameter for such simulations are wind fields. They represent one of the major sources for uncertainties in wave and surge simulations. Wind fields for such simulations are frequently obtained from numerical hindcasts with regional atmospheric models (RAMs). The skill of these atmospheric hindcasts depends, among others, on the quality of the forcing at the boundaries. Furthermore, results may vary due to uncertainties in the initial conditions. By comparing different existing approaches for forcing a regional atmospheric model, it is shown that the models' sensitivity to uncertainties in the initial conditions may be reduced when a more sophisticated approach is used that has been suggested recently. For a specific, although somewhat brief test period, it is demonstrated that an improved hindcast skill for near surface wind fields is obtained when this approach is adopted. Consequences of the reduced uncertainty in wield fields for the hindcast skill of subsequent wave modelling studies are demonstrated. Recently, this new approach has been used together with a regional atmosphere model to produce a 40-year wind hindcast for the Northeast Atlantic, the North Sea and the Baltic Sea. The hindcast is presently extended to other areas and the wind fields are used to produce 40-year high-resolution hindcasts of waves and surges for various European coastal areas. 相似文献