共查询到20条相似文献，搜索用时 15 毫秒
1.
近年来全世界范围内船撞桥事故时常发生，尤其是大型跨海桥梁，对其进行合理的船撞桥风险评估逐渐成为桥梁安全运营的重要保障之一。通过对近年国内外船撞桥案例调研分析，确定了影响事故的多重因素，建立包括4个二级风险评价指标和18个三级指标的层次化评价指标体系，并运用层次分析（AHP）法和熵权法，对各评价指标进行主客观综合赋权，明确各个风险因素对船舶撞击的重要性程度，基于模糊数学理论对船撞桥风险进行多层次综合评判。以浙江省舟山朱家尖跨海大桥为工程背景，结合该桥某年船舶通航统计数据，运用上述方法进行船撞桥风险评估，计算表明朱家尖跨海大桥平均风险评价值为4.22，属于可接受中风险水平，并提出了相应的风险控制对策及措施。 相似文献
2.
1 .Introduction Many accidents of ocean and offshore structuresinvolve impact loadings .Some famous ship colli-sion cases arethe Tj rn Bridge (Sweden) ,the West Bridge of the Great Belt Link (Denmark) andtheMaracaibo Bridge (Venezuela) . Most studies usedthe Hertzian contact law(Zukaset al .,1982) tocalculate the impact force and analyze structures subjectedtoimpact loadings .Other alternative meth-ods such as the spring-dashpot and momentumbalance methods utilizedthe coefficient of rest… 相似文献
3.
4.
A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained. 相似文献
5.
《Ocean Engineering》2007,34(5-6):645-652
Although International Maritime Organization (IMO) has taken many measures to minimize ship collisions, ships carrying liquid cargo sometimes do get struck by other vessels. The outflow of crude oil causes very serious consequences to the environment. In such cases it is necessary to analyze the response of structure of struck liquid cargo-filled tank to account for fluid–structure interaction accurately. In this paper, numerical simulation of collision between a container ship with double hull very large crude carrier (VLCC) is presented. Three different numerical simulation mothods were adopted to model fluid–structure interaction in liquid-filled cargo tank, namely arbitrary Lagrangian–Eulerian finite element method, Lagrangian finite element method and linear sloshing model. The numerical simulation results reveal that the fluid–structure interaction of liquid cargo-filled tank has a significant effect on the motion and structural response of the struck cargo tank. Compared with the calculation results of ALE FE method, the linear sloshing model underestimates the influence of fluid–structure interaction of liquid cargo tank while the Lagrangian–Eulerian finite element method may be considered as the practical method for engineering applications as it provided more reasonable results with a relatively low central processing unit (CPU) time. 相似文献
6.
基于非线性有限元分析方法和LS-DYNA计算软件,使用黏聚单元法建立层冰的数值模型,并进行了层冰与锥形立柱相互作用的数值模拟,研究抗冰锥角、冰厚等参数对立柱所受冰载荷的影响。模拟结果与实测和试验结果吻合良好。研究结果表明:使用黏聚单元法建立的层冰模型可以较好地模拟出层冰的破碎和堆积过程,冰载荷计算结果与ISO冰力标准结果以及离散单元法计算结果吻合较好;锥形立柱的抗冰锥角大小对冰载荷影响明显,随着锥角增大,水平方向的最大冰力增大而竖直方向上最大冰力减小;锥形结构改变了碰撞过程中层冰的破坏形式;结构物所受冰力大小与层冰厚度呈正相关,且增加速度接近线性。 相似文献
7.
8.
评估结构耐撞性能最可靠的方法是实尺度碰撞试验,然而对于大尺度结构物的碰撞试验,因其耗资巨大而不易开展,适当开展比例模型试验可以为简化解析算法及数值仿真计算提供验证依据,也可在一定程度上评估结构的耐撞性能。但是在进行碰撞模型试验时,材料应变率的敏感性会使得缩尺模型的动态响应与实尺度结构结果出现偏差,模型试验得到的数据与实际结构的动响应不完全遵循相似关系,这就限制了相似理论在大型结构物冲击问题上的应用。本文给出了一种通过改变冲击质量来修正应变率效应的方法,不同于传统量纲分析法中选取时间、质量和长度为基本量纲,而是以冲击质量、初始冲击速度和动态应力代替,得到计及应变率效应的质量相似关系。以此为基础,将该修正方法应用于船舶-自升式海洋平台的碰撞分析中。研究结果表明,该修正方法可以有效降低由于应变率效应而造成的缩尺误差,修正后的缩尺模型在碰撞冲击载荷下的位移、碰撞力和撞击时间等动态响应参数与实尺度模型结果的一致性更好。本文研究成果可以为大型结构物冲击模型试验设计提供技术支撑。 相似文献
9.
Two- and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier. 相似文献
10.
针对船舶与中空夹层钢管混凝土（CFDST）导管架平台碰撞问题,利用ABAQUS/Explicit非线性有限元软件建立中空夹层钢管混凝土导管腿导管架数值模型,对船舶碰撞进行数值模拟,对比分析1 m/s、2 m/s和3 m/s的3种碰撞速度下工况下导管架抗碰撞性能、耗能及损伤。从碰撞力、碰撞区域变形以及导管架能量耗散等方面详细研究中空夹层钢管混凝土导管腿作用下导管架整体的损伤模式和动力响应。结果表明：CFDST导管架在船舶碰撞荷载作用下主要由CFDST导管腿耗能,有效控制了结构整体位移变形,提升了整体刚度,有效发挥平台各构件之间组合耗能,结构抗碰撞能力得到明显提升。 相似文献
11.
长江大桥桥墩受水流冲刷和泥沙淤积的影响,需要定期对桥墩水域地形进行监测和分析。结合安庆长江公路大桥水域监测实例,阐述了使用多波束测深系统和声学多普勒流速剖面仪(ADCP)对大桥水域进行联合监测,采用GIS软件对大桥水域地形进行冲淤计算,并制作了桥墩的立体图和大桥区域的水域冲淤变化图,分析了桥墩及附近水下地形与水流的变化,对桥墩的冲刷研究具有非常重要的意义,监测成果为大桥的安全运营提供了有益的安全保障。 相似文献
12.
桥墩基础冲刷是桥梁毁坏的重要因素,是桥梁基础设计的关键指标之一。目前国内外对于桥墩基础在复杂动力条件下冲刷深度的研究常采用物理模型试验方法,利用正态系列模型方法,在波流水槽中研究了水流、潮流和波流共同作用下青州航道桥索塔基础周围流态变化和局部冲刷特征。研究结果表明,桥墩最大冲刷深度和冲淤范围与水流流速、桥墩轴线与水流夹角和波浪等因素有关;在潮流最大流速和恒定流流速一致情况下,桥墩局部冲刷深度达到平衡后,将会达到与恒定流基本一致的最大冲深;波流共同作用下的最大冲刷深度比恒定流增加10%左右。设计桥墩形状在100年一遇水流和波浪共同作用下桥墩基础局部最大冲刷深度为13.7 m。 相似文献
13.
14.
Bao Yingbin Li Runpei Gu Yongning
Ph. D. Candidate School of Naval Architecture Ocean Engineering Shanghai Jiao Tong University Shanghai Professor School of Naval Architecture Ocean Engineering Shanghai Jiao Tong University Shanghai 《中国海洋工程》1998,(1)
This paper studies intensively the problems of ship-platform collision.The ship and platformare treated as one structural system connected with spring elements and then motion equation of the colli-sion system is established.A nonlinear force-displacement relationship is derived for the simulation of lo-cal dent in a hit member and the yield surface of a dented tubular section is developed to consider the re-duction of load carrying capacity of hit members.Large deformations,plasticity and strain-hardening ofthe beam-column element are taken into account by combining the elastic large displacement analysis theo-ry with the plastic node method.The effect of the hydrodynamic forces acting on the platform,the rubberfender the property of the local dent and the buckling behavior of beam-column on collision are analyzed.The numerical simulation of the nonlinear dynamic response is carried out by Wilson θ method with updat-ed Newton-Raphson iteration.And the numerical example of the dynamic response of a offs 相似文献
15.
采用卷管法进行海底管道铺设过程中,管道首先通过牵引作用上卷于卷筒进行储存。管道与卷筒发生非线性接触,可能会产生复杂的塑性变形和局部屈曲。通过全尺寸柔性管力学性能试验获得柔性管轴力—应变以及弯曲—曲率等非线性力学性能关系,将试验所得的非线性材料性能参数导入建立的两种柔性管上卷ABAQUS有限元模型（梁—实体单元模型与壳和桁架—实体单元模型）,实现柔性管较大轴向抗拉刚度和较小抗弯刚度的同步模拟以及管道与卷筒的非线性接触响应特征。通过对比分析两种有限元模型数值模拟得到的管道弯矩、弯曲曲率、管道轴力、管道与卷筒的接触压强等数据,发现在管道上卷过程中管道沿副法线方向的SM3弯矩占据其弯曲变形主导地位;管道与卷筒之间的摩擦效应对于管道轴力的影响较为显著;管道与卷筒的最大接触压强主要发生在卷管过渡段区域。 相似文献
16.
Martin J. Petersen 《Ocean Engineering》1982,9(4):295-329
This paper described a procedure for simulation of the outer dynamics in ship collisions.The simulation procedure is derived using the transient equations for the horizontal motion of a ship. The hydrodynamic forces acting on the ships' hull during the collision are calculated by a strip method, where the forces acting on each section are described by means of unit response functions. These functions are determined by cosine transformation of the sectional dampings. The sectional added masses and dampings, and thereby also the sectional unit response functions, are calculated by an approximate method. The deformations of the slip structures during the collisions are modelled as non-linear springs.The resulting system of non-linear equations is solved using a numerical time-integration procedure.A number of different collision situations are simulated by means of the procedure. 相似文献
17.
In this study, a two-dimensional floating pier consists of single rectangular impermeable pontoon with side supporting pile-columns is studied. The purpose of this study is to present a theoretical solution for the linearized problem of incident waves exerting on a floating pier with pile-restrained. All boundary conditions are linearized in the problem, which is incorporated into a scattering problem and radiation problem with unit displacement. The method of separation of variables is used to solve for velocity potentials. For the radiation problem with unit heave and pitch amplitude, the boundary value problem with non-homogeneous boundary condition beneath the structure is solved by using a solution scheme. By calculating the wave force from velocity potential and solving the equation of motion of the floating structure simultaneously a close form theoretical solution for the problem is developed. The finite element method was also applied to calculate the dynamic responses on the supporting piles subjected to the pontoon motions and incident waves. 相似文献
18.
This paper presents a simulation model based on the finite element method. The method is used to analyze the motion response and mooring line tension of the flatfish cage system in waves. The cage system consists of top frames, netting, mooring lines, bottom frames, and floats. A series of scaled physical model tests in regular waves are conducted to verify the numerical model. The comparison results show that the simulated and the experimental results agree well under the wave conditions, and the maximum pitch of the bottom frame with two orientations is about 12o. The motion process of the whole cage system in the wave can be described with the computer visualized technology. Then, the mooring line tensions and the motion of the bottom frame with three kinds of weight are calculated under different wave conditions. According to the numerical results, the differences in mooring line tensions of flatfish cages with three weight modes are indistinct. The maximum pitch of the bottom frame decreases with the increase of the bottom weight. 相似文献
19.
20.
海上平台桶基沉贯渗流场的有限元法数值模拟 总被引：3，自引：1，他引：2
桶形基础平台是一种新型的海洋平台,这种型式的平台与传统的导管架式平台的主要区别在于采用桶形基础代替打下桩基础,桶形基础的负压沉贯过程是一个复杂的水动力过程,其关键在于主动脉施加的桶内外压力差产生渗流场,渗流场的形成与发展对于负压沉贯有决定性的影响。本文用有限元分析方法对桶形基础负压沉贯流流场进行动态模拟,建立了桶形基础负压沉贯过程中渗流场的有限元分析模型,模型试验的结果与按有限元分析计算模型得一的 相似文献