共查询到20条相似文献，搜索用时 15 毫秒
1.
Spudcan may experience punch-through failure on strong over weak layered soils, such as sand overlying clay. A large deformation finite element method （LDFE） is used to simulate the penetration process of spudcan into sand overlying clay. The sand is simulated by smoothed hyperbolic Mohr-Coulomb model, and the clay is simulated by a simple elasto-plastic model which obeys Tresca yield criterion. According to the LDFE results of a large amount of cases, the effects of the strength, unit weight and thickness of the top sand layer, as well as the effect of the strength of the underlying clay on the spudcan punch-through behavior, are investigated. The critical depth occurring punch-through and the critical bearing capacity are presented in charts. Fitting equations to calculate the critical punch-through depth and the critical bearing capacity are proposed for the convenience of engineering practice. 相似文献
2.
The behaviour of spudcan foundations during the installation and preloading in two-layer sand sediments was investigated through large deformation finite element (LDFE) analyses. The LDFE analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying Mohr-Coulomb soil model to capture hardening and subsequent softening effects of sand. Parametric analyses were undertaken varying the top layer thickness, relative density of sand and spudcan diameter. Both loose to medium dense-over-dense and dense-over-loose to medium dense sand deposits were explored. The results showed that, for the investigated relatively thin top layer thickness of ≤ 5 m, spudcan behaviour was dictated by the bottom sand layer with a minimal influence of the top layer. For assessing the penetration resistance profile in two-layer sands, the performance of the ISO, SNAME, InSafeJIP, and other existing theoretical design methods were evaluated. 相似文献
3.
开发了一种新型平台桩靴，可通过活动板转动实现自升式平台不同阶段桩靴受力面积的灵活变化。基于大变形有限元方法，模拟新型桩靴基础在“砂-黏”地层中的贯入过程，分析了活动板转角、砂层厚度比、摩擦角和黏土层不排水抗剪强度对新型桩靴贯入阻力的影响，并与普通桩靴的贯入响应比较。数值分析中，上覆砂土和下层黏土分别采用摩尔库伦模型和修正Tresca模型进行模拟。结果表明：新型桩靴穿刺时，土层参数对峰值阻力的影响规律与普通桩靴相同，但其峰值阻力随活动板转角的变化而变化，无法直接使用具有等效面积普通桩靴的穿刺预测方法。考虑各项关键影响因素，结合穿刺破坏时的地基破坏模式，基于数值模拟结果提出了适用于新型桩靴的贯入阻力预测公式。 相似文献
4.
Static stability mainly against sliding of a typical, relatively large skirted gravity structure was investigated using three-dimensional finite element modeling. The numerical model was validated against centrifuge test results. A specific set of dimensions was chosen to model a typical skirted gravity structure in a centrifuge with two types of foundation soils: uniform saturated sand and a clay zone sandwiched between two sand layers. Soil shear strength parameters used in the finite element models were estimated from in-flight cone penetration resistance measurements obtained in the centrifuge. Numerical parametric studies were conducted using the validated finite element model. The parameters included were the depth and strength of the clay zone and the inclination of external load. It is shown that a relatively simple three-dimensional finite element model was effective in providing information that would be needed to design such a critical and expensive offshore structure. Basic Mohr-Coulomb strength parameters and moduli based on cone penetration resistance measurements and published empirical correlations were appropriate in modeling the soils in the finite element simulations. 相似文献
5.
This paper reports five case histories of jack-up rig installation in layered soil profiles where a dominate feature was a stronger sand layer overlaying a weaker clay layer. In all cases a relatively continuous load-penetration profile was measured during installation of each of the three spudcan foundations. Summary site-investigation data is provided and consisted of mainly torvane, minature vane, unconsolidated undrained triaxial and pocket penetrometer tests for determining undrained shear strength of the clays and blow counts for deriving the relative density of sand. A statistical averaging method recommended in the InSafeJIP guidelines was used to provide the best fit of the undrained shear strength profile in the clay as this then allowed for spudcan load-penetration profiles to be estimated without introduction of user interpretation or bias. Sand properties were taken as provided in the original site-investigation report. Comparisons between load-penetration profiles calculated using the industry-standard ISO guideline, more recently proposed mechanism-based calculation method and three-dimensional large deformation finite element simulations are made with the measured data, leading to valuable insights for practitioners for estimating behaviour of jack-up installations in problematic sand-over-clay soil profiles. 相似文献
6.
Mobile jack-up drilling rigs are deployed at many locations during their service life. This necessitates retrieval of the platform’s legs and spudcan footings before the rig move. In soft soils, where the spudcans embed deeply, the extraction process can be difficult, time consuming and therefore costly. Water jetting systems, devised to ease spudcan extraction, are a common feature on modern jack-up units. However, their effectiveness in reducing the pull-out load required is questioned by the offshore industry. To investigate their efficiency, centrifuge experiments of a reduced scale spudcan model with jets have been performed at the University of Western Australia. The footing was extracted from penetrations of up to 1.5 diameters in normally consolidated clay. Similar to spudcan extraction in the field, these were carried out under load control, applying a constant extraction force. Both influences of pull-out load magnitude and jetting flow rate were investigated. The study demonstrates that jetting is efficient in facilitating spudcan extraction, as it reduces the required uplift load. Practical guidance is provided in applying the results to field conditions. 相似文献
7.
在自升式平台的预压载过程中，桩靴在层状地基上较易发生“穿刺”现象，很大程度上影响着平台的安全运行。准确地分析桩靴峰值阻力，避免平台桩靴发生“穿刺”是非常重要的。采用极限分析上限定理，合理构建运动许可速度场，从理论上推导了层状地基上桩靴峰值阻力的上限解答。为了进一步验证峰值阻力理论解答的准确性，采用ABAQUS有限元软件构建了“桩靴—弹塑性海床”的三维数值模型，对桩靴贯入海床的过程进行了数值模拟，分析桩靴周围土体的塑性变形演变规律，研究土体的破坏机理。研究结果表明：推导的桩靴峰值阻力上限解答，能够较好地计算层状地基极限承载能力，通过与离心机试验和数值结果对比，计算误差在18%以内；给出的运动许可速度场能够较好地反映桩靴周围土体破坏模式；桩靴阻力达到峰值时，下层软土中的土塞高度约为桩靴直径的0.2倍。 相似文献
8.
Knut H. Andersen Philippe Jeanjean Dirk Luger Hans Petter Jostad 《Ocean Engineering》2005,32(7):845-863
Three centrifuge model tests were performed in normally consolidated Speswhite Kaolin to study the penetration of suction anchors in soft clay. The suction anchors could be penetrated by means of underpressure to a depth of about 12.4 to a little more than 14.5 times the diameter. When the anchors were penetrated by underpressure, all clay displaced by the skirt moved into the anchor. At a penetration depth of about half the maximum penetration depth, the volume of the soil heave inside the anchor actually increased more than the volume of the displaced clay. When a material coefficient of 1.5 against plug failure was mobilized, more than the clay displaced by the skirts had accumulated inside the anchor. The penetration resistance increased by 42 and 26% during rest periods of 4.5 and 0.8 days prototype time, respectively. Some uncertainty in the shear strength of the clay beds gave some uncertainty with respect to the interpretation, but the observed behaviour generally confirmed the theoretical analyses. 相似文献
9.
海上自升式钻井平台以其造价低廉、便于移动和安装的优势被广泛应用于海洋地质勘察、风电安装和油气开采等领域,其基础类型多为桩靴基础。为了保证平台能在恶劣的海洋环境中安全作业,桩靴基础需要贯入海床以下一定深度以获得足够的承载力。然而,当桩靴基础在上硬下软土层中贯入时可能发生穿刺破坏导致平台损坏甚至倾覆。已有的桩靴穿刺破坏分析方法基于预设的地层参数预测穿刺荷载,由于无法考虑海床中地层及土性的不确定性,其准确性有待提高。将桩靴基础贯入过程中的监测数据与穿刺破坏机理相结合,通过66组离心机模型试验结果表征土体不确定性的影响,发展贝叶斯预测模型,实现了峰值阻力和穿刺深度的实时预测。基于规范推荐的荷载扩展分析法和冲剪系数分析法,建立了适用于规范法的概率模型,采用该模型对上砂下黏土层中桩靴基础的穿刺行为进行了预测,结果表明所提方法的预测精度随着监测数据的增加而提高,预测得到的峰值阻力误差在10%以内。 相似文献
10.
复杂土层中自升式平台桩靴安装穿刺预测 总被引：1，自引：1，他引：0
由于复杂海洋工程地质条件的普遍性,自升式平台在安装过程中穿刺事故频发,近年来涌现出大量针对自升式平台桩靴基础在复杂土层中穿刺预测方法的研究。为了方便工程设计人员的理解和使用,首先简单介绍这些研究中所采用的技术手段,总结现行规范ISO 19905-1建议的桩靴在复杂土层中贯入阻力的预测方法以及最新文献中提出的新的设计方法,并对规范方法和新方法的优缺点进行了评价。所总结的设计方法针对国内外常见的含穿刺风险的海洋地基形式,包括双层"砂—黏"、三层"硬—软—硬"黏性土、三层"软—硬—软"黏性土、三层"黏—砂—黏"地层以及四层"黏—砂—黏—硬层土"地层。通过对离心机模型试验的预测,对规范方法和新方法的预测精度进行了比较,对比结果显示新方法对桩靴穿刺破坏的预测更为合理精确。 相似文献
11.
Experimental investigation of the system behaviour of a model three-legged jack-up on clay 总被引：1，自引：0，他引：1
Results from combined loading experiments dedicated to evaluating the capacity and stiffness of a single footing have significantly improved the understanding of the response of circular shallow foundations. However, due to experimental practicalities, little corroborative evidence is available to confirm predicted behaviour when multiple footings act within a structural system. This paper addresses this concern by presenting the results of a series of experimental tests on a three-legged model jack-up unit founded on soft, heavily overconsolidated clay. The model adopted geometric features representative of a large prototype rig by appropriately scaling leg height, leg separation and flexural stiffness, as well as the ‘spudcan’ footing diameter and profile. Pushover events were considered by subjecting the model jack-up to monotonic horizontal loading at hull level. By measuring loads and displacements at the hull and at each spudcan, the system behaviour of the jack-up could be analysed. Nine separate tests were performed, revealing how load orientation, leg length and preload ratio changed the system capacity and affected the load–displacement paths of the jack-up and spudcan system. The test results are compared with those derived from single spudcan experiments, and are interpreted within the combined load yield surface approach gaining acceptance within the offshore industry. 相似文献
12.
T.H. Dawson 《Ocean Engineering》1980,7(4):553-562
A simple theory for predicting the response to cyclic lateral loading of piles deeply driven in either soft clay or sand is presented and formulas given for calculating, among other things, deflection and internal bending moment along the pile. The theory assumes the soil resistance to deflection to be characterized by an initial elastic reaction up to a critical deflection level, followed by a yield reaction independent of further deflection. Soil parameters are estimated and the theory is shown to provide good correlation with existing field data. 相似文献
13.
在海洋工程中,移动钻井平台在作业结束后需要转场时,经常会遇到拔桩困难的问题,桩靴底部的吸附力是上拔力的重要组成部分,明确其产生机理及发展规律对于上拔力计算与缓解上拔困难问题有重要意义。通过室内模型试验研究了黏土中桩靴底部真空度对桩靴吸附力产生机理的影响,试验结果表明,桩靴底部真空度的变化对上拔力的影响显著,而桩靴贯入深度和上拔速率会对真空度产生影响。当真空度达到峰值时,桩靴底部吸附力与上拔力几乎同时达到峰值,因此可以通过减小桩靴底部真空度的措施来减小上拔力。根据试验结果,提出了运用真空吸盘理论来计算桩靴底部吸附力的计算公式。所述吸附力计算方法与试验结果进行对比,其误差较小,对工程实践具有一定的参考意义。 相似文献
14.
The jack-up unit may suffer difficult extraction from soft clay attributed to the large embedment and suction. To ease spudcan extraction, the jetting technique is extensively adopted. The jetting effect on spudcan extraction is investigated with a series of model tests. Firstly, the effectiveness of top jetting is investigated, and it is found that the top jetting is not effective in reducing extraction resistance. Secondly, the efficiency of different jetting procedures are studied. It is revealed that jetting prior to extraction reduces the suction by increasing the excess pore pressure at spudcan base. And the jetting after extraction begins reduces the suction by filling the gap formed under the spudcan with jetting water and eliminating cavitation. Finally, tests with different jetting times, jetting rates, jetting pressures, and jetting nozzle locations and numbers are conducted. It is found that the effect of jetting time converges as it increases. The flow rate of jetting prior to extraction has little effect on jetting efficiency, whereas the flow rate of jetting after the extraction begins has significant influences on the jetting efficiency. Jetting pressure also has great effect on jetting efficiency, and converges as it increases. The closer the nozzles are located to the spudcan edge, the sooner the post-peak extraction resistance decreases. And the jetting efficiency increases with the nozzle number. The findings from the experimental studies can serve as a reference for future studies on the operation and optimization design of a jack-up jetting system. 相似文献
15.
Jack-up platforms of the Ocean engineering structures always withstand the vertical gravity loads which are applied to the seabed by spudcan, so it is important to determine the bearing capacity and the penetration depth of the spudcan for its geometry. In fact, it is up to the deformation law and the failure modes of soil surrounding the spudcan which can calculate the ultimate bearing capacity of the spudcan foundation on the soil seabed. By using the finite element analysis software Abaqus, the deformation law of soil around the spudcan is analyzed in detail, and the failure modes of soil surrounding the spudcan foundation are achieved. At the same time, based on the limit equilibrium theory, by use of static permissible slip-line field, the ultimate bearing capacity of the spudcan foundation is analyzed and the lower limit solution is derived theoretically, and the effect of the spudcan angle on the ultimate bearing capacity is investigated. The numerical results are compared with those obtained by the theoretical formulas deduced in this paper. On the basis of the lower limit solutions in this paper, the effect of the spudcan angle on the ultimate bearing capacity is revealed, and a practical bearing capacity formula is given to take the effect of the spudcan angle into consideration. 相似文献
16.
The holocene sand bodies in Changjiang delta area may be classified genetically as river mouth sand, marine sand and river channel-filled sand, which are different in external geometry, internal characteristics, spatial distribution and contact with overlying and underlying beds, The sand bodies ate distributed in two-storeyed beds in vertical sequence. The transgressive sands are overlain by regressive ones, and there is a wedge of marine clay between them. 相似文献
17.
The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen. 相似文献
18.
This paper, Part II, presents two soil modelling approaches developed specifically for fatigue analysis of well conductors. The first approach uses Winkler springs and can account for soil damping. The second approach is based on continuum soil mechanics and uses the kinematic hardening principles. They focus on cyclic soil behaviour at the steady-state condition. The paper demonstrates appropriateness of the approaches in predicting fatigue damage through comparisons with the centrifuge fatigue lives measured from the Series 1 tests in NC to lightly OC kaolin clay. It also presents and discusses the analyzed data and the fatigue lives measured from the Series 2 (medium-dense sand), Series 3 (NC to lightly OC GoM clay), and Series 4 (OC natural clay) tests. Finally, soil models (based on the first approach) are presented for fatigue analysis of well conductors installed in NC to lightly OC clays, over-consolidated (OC) clays and medium-dense sands, and their ability to predict conductor fatigue damage under wide range of loading conditions is demonstrated. Overall, the accuracy of fatigue life predictions using these novel soil models is very high – generally within about a few percentages of the measured values. 相似文献
19.
The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan. 相似文献
20.
A series of centrifuge tests were performed to investigate the response of a free-head monopile due to cyclic lateral loading in normally consolidated clay. By linking the maximum reaction-force point of the final cycles in all tests with various amplitudes, a postcyclic reaction-force curve is obtained, which can be used to assess the postcyclic remolded lateral stiffness. To numerically analyze the tests, a strength degradation model of the clay is calibrated by the T-bar cyclic test. However, this model is T-bar-dependent, which is unable to capture the degrading behavior of the monopile stiffness. Thus, a modification approach is proposed based on the upper bound theory, and the modified model is further combined with finite element analysis to simulate the cyclic behavior of the model pile. The simulation results show similar degrading trend and consistent postcyclic remolded lateral stiffness with the model tests. This further demonstrates that the remolded lateral stiffness mainly depends on the soil remolded strength, which is one of the parameters calibrated by the T-bar tests. Based on this finding, a simplified numerical analysis is proposed, which can predict the postcyclic reaction-force curve by performing one monotonic loading instead of modeling the whole process of cyclic loading. 相似文献