共查询到20条相似文献，搜索用时 656 毫秒
1.
Damaged ship at sea will be a direct threat to lives and property, and it has a great significance of studying ship's remaining buoyancy, stability, sinking time and other important parameters. The process of a damaged ship sinking into water is a complex motion involving ship hull, inner and outer fluid coupled with waves and many other factors. It is featured by high nonlinearity and hard to establish a precise theoretical model to study. Yet SPH (smoothed particle hydrodynamics) as a meshfree method has a great advantage in solving such problems because of the nature of self-adaptive and Lagrangian. Firstly, the experiments of two scaled ship models with different openings sinking into water are carried out, through the sinking processes of broadside opening and bottom opening models, the conclusion is drawn that although the serious loss of stability of broadside opening model, the sinking time and other parameters are more conducive to rescue after maritime distress. Secondly, the parallel program of three dimensional SPH is developed to simulate the above more complex model, broadside opening model. The coupled process of sloshing is compared with that of experiment, and the results show good agreement with each other which verify the accuracy and feasibility of three dimensional parallel program. 相似文献
2.
Hyeon Kyu Yoon Nam Sun Son Gyeong Joong Lee 《Oceanic Engineering, IEEE Journal of》2007,32(4):798-806
When a fast container ship or a naval vessel turns, accompanying roll motions occur. This roll effect must be considered in the horizontal equations of the motion of the ship to predict the maneuverability of the ship properly. In this paper, a new method for determining a model structure of the hydrodynamic roll moment acting on a ship and for estimating the hydrodynamic coefficients is proposed. The method utilizes a system identification technique with the data from sea trial tests or from free running model (FRM) tests. To obtain motion data that is applied to the proposed algorithm, an FRM of a large container ship was developed. Using this model ship, standard maneuvering tests were carried out on a small body of water out of doors. A hydrodynamic roll moment model was constructed utilizing the data from turning circle tests and a 20-20 zig-zag test. This was then confirmed through a 10-10 zig-zag test. It was concluded that a model structure of the hydrodynamic roll moment model could be established without difficulty through a system identification method and FRM tests. 相似文献
3.
港口中系泊船在波浪作用下运动问题的本质是浅水波浪与浮体的相互作用。与深水情况不同,浅水问题应当考虑水底、水域边界的影响及浅水波浪自身的特性,单一模型很难实现该模拟过程。为此,建立了Boussinesq方程计算入射波和Laplace方程计算散射波的全时域组合计算模型。有限元法求解的Boussinesq方程能使入射波充分考虑到水底、水域边界的影响和浅水波浪的特性;散射波被线性化,采用边界元法求解,并以浮体运动时的物面条件为入射波和散射波求解的匹配条件。该方法为完全的时域方法,计算网格不随时间变动,计算过程较为方便。通过与实验及其他数值方法的结果进行比较,验证了本模型对非线性波面、浮体的运动都有比较理想的计算结果,显示了本模型对非线性问题具有较好的计算能力。 相似文献
4.
This paper describes an effort to develop a predictive tool for the design of a new promising marine transport — the WIG craft. The presented mathematical model of the WIG craft is capable of modeling the aerodynamics of a WIG system including the ground effect, the hydrodynamics of a stepped planing hull with a hydrofoil and also the simulation of motion for the craft. Based on extensive experience using the model, it is shown that the most important and necessary features of WIG aero- and hydrodynamics are taken into account. The results of simulations have been validated through comparison with other theoretical approaches and also with model experiments. The mathematical model is applied to investigate the dynamics of the small manually piloted WIG craft: “Hydrowing VT01”. The numerical study resulted in recommendations allowing the pilot to overcome the pitch-up tendency and also to perform the take-off manoeuvre smoothly. The stability of the WIG with a hydrofoil and also the dynamic properties of anti-collision manoeuvres have been studied and are presented. 相似文献
5.
The high-speed impact between a body and water is an important practical problem, whether due to wave impact on a structural deck or wall, or due to a moving body such as a ship or aircraft hitting water. The very high pressures exerted are difficult to predict and the role of air may be significant. In this paper, numerical simulations are undertaken to investigate the impact of a rigid horizontal plate onto a wave crest and, in the limit, onto a flat water surface. A two-phase incompressible–compressible smoothed particle hydrodynamics (SPH) method for water and air, respectively, is applied where the water phase imposes kinematics on the air phase at the air–water interface and the air phase imposes pressures on the water at the interface. Results are compared with experimental measurements undertaken using a drop rig positioned over a wave flume so that a horizontal plate impacts the water surface in free flight. Numerical predictions of impact pressure are quite accurate; air is shown to have a significant cushioning effect for impact on to flat water and this reduces for waves as the ratio of wave height to wavelength increases. 相似文献
6.
The application of a Smoothed Particle Hydrodynamics (SPH) model to simulate the nonlinear interaction between waves and a moored floating breakwater is presented. The main aim is to predict and validate the response of the moored floating structure under the action of periodic waves. The Euler equations together with an artificial viscosity are used as the governing equations to describe the flow field. The motion of the moored floating body is described using the Newton’s second law of motion. The interactions between the waves and structures are modeled by setting a series of SPH particles on the boundary of the structure. The hydrodynamic forces acting on the floating body are evaluated by summing up the interacting forces on the boundary particles from the neighboring fluid particles. The water surface elevations, the movements of the floating body and the moored forces are all calculated and compared with the available experimental data. Good agreements are obtained for the dynamic response and hydrodynamic performance of the floating body. The numerical results of different immersion depths of the floating body are compared with that of the corresponding fixed body. The effects of the relative length and the density of the structure on the performance of the floating body are analyzed. 相似文献
7.
When ordinary Smoothed Particle Hydrodynamics (SPH) method is used to simulate wave propagation in a wave tank, it is usually observed that the wave height decays and the wave length elongates along the direction of wave propagation. Accompanied with this phenomenon, the pressure under water decays either and shows a big oscillation simultaneously. The reason is the natural potential tensile instability of modeling water motion with ordinary SPH which is caused by particle negative stress in the computation. To deal with the problems, a new sextic kernel function is proposed to reduce this instability. An appropriate smooth length is given and its computation criterion is also suggested. At the same time, a new kind dynamic boundary condition is introduced. Based on these improvements, the new SPH method named stability improved SPH (SISPH) can simulate the wave propagation well. Both the water surface and pressure can be well expressed and the oscillation of pressure is nearly eliminated. Compared with other improved methods, SISPH can truly reveal the physical reality without bringing some new problems in a simple way. 相似文献
8.
An integrated dynamic model of China’s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control. 相似文献
9.
H.H. Chun 《Ocean Engineering》2002,29(10):1145-1162
The longitudinal stability characteristics of a Wing-In-Ground (WIG) effect craft are quite different from those of the conventional airplane due to the existence of force and moment derivatives with regard to height. These stability characteristics play an important role in designing a safe and efficient WIG due to its potential danger in sea surface proximity. The static and dynamic stability criteria are derived from the motion equations of WIG in the framework of small disturbance theory and discussed in this paper. The static and dynamic stability analyses of a 20-passenger WIG are conducted based on wind tunnel test data, and dynamic motion behaviors are investigated for changes in design parameters. Finally, the flying quality of the 20-passenger WIG is analyzed at cruising conditions according to the military regulations. 相似文献
10.
Turbulent vortical structures under broken solitary waves are studied using three-dimensional smoothed particle hydrodynamics (SPH) method. The numerical model predicts water surface evolution and horizontal velocity very well in comparison with the experimental results. The numerical results detect organized coherent structures characterized as reversed horseshoe (hairpin) vortices being generated at the back of the broken spilling wave and traveling downward. The counter rotating legs of the reversed horseshoe structures appear to be a continuous form of the previously found obliquely descending eddies. The reversed horseshoe structures are associated with the turbulence motion of sweep events (downwelling motion) and transport momentum and turbulent kinetic energy downward into the water column. Vortex turning play an important role on the generation and evolution of three dimensional reversed horseshoe structures from the spanwise breaking wave rollers. 相似文献
11.
This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope. 相似文献
12.
For the non-negligible roll-coupling effect on ship maneuvering motion, a system-based method is used to investigate 4-DOF ship maneuvering motion in calm water for the ONR tumblehome model. A 4-DOF MMG model is employed to describe ship maneuvering motion including surge, sway, roll, and yaw. Simulations of circular motion test, static drift and heel tests are performed by solving the Reynolds-averaged Navier-Stokes (RANS) equations, after a convergence study quantifying the necessary grid spacing and time step to resolve the flow field adequately. The local flow field is analyzed for the selected cases, and the global hydrodynamic forces acting on the ship model are compared with the available experiment data. Hydrodynamic derivatives relating to sway velocity, yaw rate, and heel angle are computed from the computed force/moment data using least square method, showing good agreement with those obtained from EFD data overall. In order to investigate further the validity of these derivatives, turning circle and zigzag tests are simulated by using the 4-DOF MMG model with these derivatives. The trajectories and the time histories of the kinematic variables show satisfactory agreement with the data of free-running model tests, indicating that the system-based method coupled with CFD simulation has promising capability to predict the 4-DOF ship maneuvering motion for the unconventional vessel. 相似文献
13.
The hydrodynamic properties of long rigid floating pontoon interacting with linear oblique waves in water of finite arbitrary depth are examined theoretically. The flow is idealized as linearized, velocity potentials are expressed in the form of eigen-function expansions with unknown coefficients. The fluid domain is split into three regions, region (1) wave-ward of the structure, region (2) in the lee of the structure, and region (3) beneath the structure. The different hydrodynamic quantities of interest such as the exciting forces, added mass and damping coefficients, reflection and transmission coefficients were studied for an applicable range of wave/structure parameters. Assuming rigid body motions, dynamic responses of the moored structure is approximately calculated through three equations of motion. Floating pontoons proved to be a convenient alternative for protection from waves in shallow water. The present method of solution was found to be computationally efficient, and results are comparable to those obtained through other techniques. 相似文献
14.
A set of canonical problems in sloshing, Part I: Pressure field in forced roll—comparison between experimental results and SPH 总被引：1，自引：0，他引：1
In this article, impact pressure in the case of shallow water sloshing is investigated experimentally and numerically for forced rolling motion. The maximum values of impact pressures have been found for a frequency lower than the first sloshing frequency. Experimental results are compared with numerical ones obtained using smoothed particle hydrodynamics (SPH). The influence of viscosity and of density re-initialization on the SPH results are discussed. A new method for calculating the pressure on walls with SPH is presented. 相似文献
15.
Mohammad Saeed SEIF Ebrahim JAHANBAKHSH Roozbeh PANAHI Mohammad Hossein KARIMI 《海洋工程》2009,(3):517-528
High speed planing hulls have complex hydrodynamic behaviors. The trim angle and drafts are very sensitive to speed and location of the center of gravity. Therefore, motion simulation for such vessels needs a strong coupling between rigid body motions and hydrodynamic analysis. In addition, free surface should be predicted with good accuracy for each time step. In this paper, velocity and pressure fields are coupled by use of the fractional step method. On the basis of integration of the two-phase viscous flow induced stresses over the hull, acting loads (forces and moments) are calculated. With the strategy of boundary-fitted body-attached mesh and calculation of 6-DoF motions in each time step, time history of ship motions including displacements, speeds and accelerations are evaluated. For the demonstration of the software capabilities, circular cylinder slamming is simulated as a simple type of water slamming. Then, a high-speed planing catamaran is investigated in the case of steady forward motion. All of the results are in good concordance with experimental data. The present method can be widely implemented in design as well as in performance prediction of high-speed vessels. 相似文献
16.
A. Benetazzo 《Ocean Engineering》2011,38(16):1755-1762
A new six Degree Of Freedom (6DOF) motion measurement technique for small-scale physical models of floating bodies is presented, based on analysis of image sequence from one camera. The proposed system consists of one camera and one target: the method estimates the 3-D rigid motion following the time evolution of the target of known pattern fixed to the moving body and framed by the camera. In particular, the rotation matrix and the translation vector of the 3-D rigid motion between initial still position and a generic moved position are calculated by assuming the existence of a planar homography between the camera CCD plane and the plane passing through the flat target surface. Geometrical relationship allows one the calculation of wanted 6DOFs for every point of the modeled body. In the paper, the method is mathematically presented in terms of equations of rigid motion with its associate accuracies. The image-based technique is illustrated on some tests carried out in an experimental multipurpose wave basin. 相似文献
17.
The present article presents a nonlinear analysis for determining the three-dimensional unsteady potential-flow characteristics about a wing subject to wing-in-ground effect (WIG) operating above progressive water waves. By means of the time-domain Green's function for the three-dimensional dipole moving above the free surface satisfying the dynamic and kinematic boundary conditions on the mean free surface, the influence of the free surface on the vortex ring is considered. Then, the nonlinear unsteady lifting surface theory is developed to study the lifting problem for a three-dimensional wing operating above progressive water waves. Furthermore, the roll-up shed from the wing in the presence of a free surface and water waves is taken into account. With the computed results, the non-dimensional force coefficients (including the lift coefficient, induced drag coefficient and lift-to-drag ratio) are presented with the variation of different geometry and water wave parameters. The data reported in the literature are presented to validate the present approach. 相似文献
18.
This paper analyses nonlinear dynamics of cable towed body system. The cable has been modeled and analyzed using a new nodal position finite element method, which calculates the position of the cable directly instead of the displacement by the existing finite element method. The newly derived nodal position finite element method eliminates the need of decoupling the rigid body motion from the total motion, where numerical errors arise in the existing nonlinear finite element method, and the limitation of small rotation in each time step in the existing nonlinear finite element method. The towed body is modeled as a rigid body with six degrees of freedom while the tow ship motion is treated as a moving boundary to the system. A special procedure has been developed to couple the cable element with the towed body. The current approach can be used as design tool for achieving improved directional stability, maneuverability, safety and control characteristics with the cable towed body. The analysis results show the elegance and robustness of the proposed approach by comparing with the sea trial data. 相似文献
19.
This paper considers a numerical analysis of ship maneuvering performance in the presence of incident waves and resultant ship motion responses. To this end, a time-domain ship motion program is developed to solve the wave–body interaction problem with the ship slip speed and rotation, and it is coupled with a modular-type 4-DOF maneuvering problem. In this coupled problem, the second-order mean drift force, which can play an important role in the ship maneuvering trajectory, is estimated by using a direct pressure integration method. The developed method is validated by observing the second-order mean drift force, and planar trajectories in maneuvering tests with and without the presence of incident waves. The comparisons are made for two ship models, Series 60 with block coefficient 0.7 and the S-175 containership, with existing experimental data. The maneuvering tests observed in this study include a zig-zag test in calm water, and turning tests in calm water and in regular waves. The present results show a fair agreement of overall tendency in maneuvering trajectories. 相似文献
20.
This paper deals with the static structural test of 1.5-ton test WIG (Wing-In-Ground effect) craft designed and built to verify its aero/hydro-dynamic and structural design characteristics prior to the design of full scale 20-passenger WIG craft. The test WIG craft is scaled down from its full scale WIG craft by 1/2 and built using pre-preg carbon/epoxy composites for the majority of structural parts with metallic materials for fittings used at wings to hull connections. To initiate the test, the finite element (FE) models of the test WIG craft are developed and, based on their results, the details of applied load range, strain/deflection gauge types and locations, load application methods and data acquisition system specifications are determined. The test is performed with respect to main wings to hull connection part first and then vertical tail wing to hull connection part and, finally, horizontal tail wing to vertical tail wing/hull connection part. Both the test and FE model results are compared with respect to stresses and deflections and the comparison shows good correlation between them which implies satisfactory design and building of 1.5-ton test WIG craft. 相似文献