共查询到20条相似文献，搜索用时 31 毫秒
1.
Lateral Global Buckling of Submarine Pipelines Based on the Model of Nonlinear Pipe–Soil Interaction
With the increasing development and utilization of offshore oil and gas resources, global buckling failures of pipelines subjected to high temperature and high pressure are becoming increasingly important. For unburied or semi-buried submarine pipelines, lateral global buckling represents the main form of global buckling. The pipe–soil interaction determines the deformation and stress distribution of buckling pipelines. In this paper, the nonlinear pipe–soil interaction model is introduced into the analysis of pipeline lateral global buckling, a coupling method of PSI elements and the modified RIKS algorithm is proposed to study the lateral global buckling of a pipeline, and the buckling characteristics of submarine pipeline with a single arch symmetric initial imperfection under different pipe–soil interaction models are studied. Research shows that, compared with the ideal elastic–plastic pipe–soil interaction model, when the DNV-RP-F109 model is adopted to simulate the lateral pipe–soil interactions in the lateral global buckling of a pipeline, the buckling amplitude increases, however, the critical buckling force and the initial buckling temperature difference decreases. In the DNV-RP-F109 pipe–soil interaction model, the maximum soil resistance, the residual soil resistance, and the displacement to reach the maximum soil resistance have significant effects on the analysis results of pipeline global buckling. 相似文献
2.
Offshore pipelines are usually buried to avoid damage from fishing activities and to provide thermal insulation. Provided that the buried pipelines are sufficiently confined in the lateral direction by the passive resistance of the trench walls, they may be subject to vertical buckling caused by a rise in temperature. Vertical buckling is usually called upheaval buckling because the heated pipeline is assumed to move upwards conventionally. However, the seabed may be very soft, especially where a pockmark or abyssal ooze appears. Consequently, under thermal compressive force, the pipeline may buckle downward and penetrate into the seabed because the downward soil resistance is small. In this study, we extended an analytical solution for vertical pipeline buckling on a rigid seabed to a soft seabed, and the effects of soil resistance on pipeline stability, buckling mode and amplitude are illustrated and analyzed. 相似文献
3.
4.
Yang Cao 《Marine Georesources & Geotechnology》2013,31(4):477-487
AbstractThe deep-water pipeline is the main means of transportation in offshore oil and gas development engineering. The deep-water pipeline may incur lateral global buckling due to the high temperature and pressure that are applied on the pipeline to ensure the contents’ liquidity. With the increasing operating water depth, a higher temperature and pressure are applied to the pipeline, causing large lateral deformation and a large bending moment. Due to the inhomogeneous distribution of the bending moment on the cross-section, different points on the cross-section will deform differently. This kind of deformation causes the cross-section to turn into an oval ring. The cross-section ovalization caused by global buckling was rarely analyzed in former engineering practice since the load is relatively low. With the increase in operation water depth and operation load, the ovality caused by global buckling is noticeable. This article analyzed cross-section ovalization caused by pipeline lateral global buckling with a numerical simulation method. The pipelines with different initial cross-section shapes were simulated, and the influence of several impact factors, including load, pipeline and soil factors on the ovality of the cross-section, were analyzed. The results show that the initial cross-section shape type has little effect on the pipeline ovalization pattern. The initial ovality of the pipeline with an oval ring cross-section shape has little influence on the residual ovality. Among all the factors analyzed in this paper, the pressure difference is the primary factor that should be considered in a pipeline ovalization check. 相似文献
5.
海洋油气资源的运输主要通过海底管道进行,管道在工作时受到较大的温度荷载,会产生整体屈曲变形。深海管道设计中常采用人为装置触发一定程度的水平向整体屈曲变形,来释放轴向的温度应力,浮力装置是常用的触发方式之一。本文通过数值模拟研究,分析了不同浮力大小和不同浮力施加范围下,管道水平向整体屈曲的临界屈曲力,得出临界屈曲力随浮力大小和施加范围变化的情况;并研究了不同土体阻力下,浮力装置触发整体屈曲的效果。研究表明,水平向土体阻力较大时,浮力装置触发水平向整体屈曲的效果较好。浮力装置的触发效果对轴向土体阻力不敏感。 相似文献
6.
海底管线是海洋石油的重要输运手段。为满足输送工艺的需要,正常工作条件下管线往往被施加较高的温度和压强,高温高压使管线内产生附加应力,当附加应力大于土体对管线的约束力时,管线就会发生整体屈曲。过度的水平向整体屈曲会导致截面产生较大的弯曲应力和压缩应变,对管线系统的安全运行造成威胁,因此需要对发生水平向整体屈曲后的管线进行验算。采用解析解法、规范法和有限元法对管线的整体屈曲进行分析,提出了应用临界屈曲荷载值域空间和值域下限来判断不同缺陷大小下管线是否发生水平向整体屈曲的方法。结合工程实例,分别采用内力控制标准和位移控制标准对管线水平向整体屈曲后是否失效进行了验算。研究指出,相较于位移标准,内力控制标准更为严格。 相似文献
7.
双拱初始缺陷海底管线水平向整体屈曲数值模拟分析 总被引：1，自引：0，他引：1
为了研究具有双拱反对称初始缺陷海底管线的整体屈曲特性,采用模态分析法将最可能出现的缺陷形态引入数值分析模型中。针对管线在高温高压作用下发生整体屈曲的动态变形特征,运用显式动力数值模拟方法研究了管线整体屈曲过程中水平向变形与轴向变形随温度和内压的变化规律,建立了在整体屈曲过程中屈曲管段与滑动管段轴力的变化过程与初始缺陷形态的关系。将数值模拟结果同经典解析解和室内模型实验结果进行对比,验证了本方法的可靠性。工程算例的分析结果表明,管线整体屈曲的发生是一个由低阶向高阶发展的过程,具有双拱缺陷的管线首先发生二阶模态的整体屈曲,而后过渡到四阶模态;管线整体屈曲的变形包括屈曲段的水平向变形和滑动管段的轴向缩进,其中水平变形释放了管壁内的轴力,轴力的释放量随初始缺陷尖锐程度的降低而增大;轴向缩进变形由于受到地基土的摩阻力使滑动管段内的轴力发生累积,轴力的累积量随初始缺陷的尖锐程度的降低而增加。以上研究成果对指导实际工程具有现实意义。 相似文献
8.
温度应力下海底管线的整体屈曲是海底管线设计中的关键问题之一,不埋或半埋的海底管线较易发生水平向整体屈曲。海底管线会因为制造的缺陷或铺设的原因而具有初始变形,即初始侧向变形。研究了初始侧向变形对海底管线整体屈曲的影响,应用小变形理论建立了单拱侧向变形和反对称双拱侧向变形管线发生低阶模态水平向整体屈曲的理论分析方法,结合工程实例分析了初始侧向变形形态、侧向变形幅值以及地基土体强度特性对管线水平向整体屈曲的影响。结果表明,初始侧向变形的存在使管线更易发生整体屈曲;而反对称双拱侧向变形比单拱侧向变形更易引起管线整体屈曲;随初始侧向变形幅值的增加管线发生整体屈曲所需要的温差降低,且整体屈曲变形形态有所改变管土间摩擦系数的增加会提高管线发生整体屈曲的温差,从而提高管线抵抗整体屈曲变形的能力。 相似文献
9.
为了探索不同径厚比海底管道的压溃屈曲特性，本文分别采用挪威船级社（Det Norske Veritas,DNV）规范、有限元模拟和深海压力舱模型试验，研究不同径厚比海底管道承载外部水压的能力，并就DNV规范压溃屈曲计算公式对不同径厚比管道的适用性进行了讨论，优化了小径厚比海底管道压溃屈曲的设计方法。研究表明：小径厚比管道的压溃屈曲临界压力对管道径厚比的变化更敏感；DNV规范计算小径厚比管道的压溃屈曲临界压力偏小，在进行深海管道的压溃屈曲设计时，建议采用模型试验结合有限元模拟的方法，计算管道实际可提供的压溃屈曲承载力。 相似文献
10.
11.
不埋海底管道在高温高压作用下,易发生水平向整体屈曲。实际工程中,常通过在管道路由上设置整体屈曲触发装置,实现对水平向整体屈曲的有效控制,其中以枕木法的成功应用最为多见。本文分析了枕木法的主要影响因素并验证了采用枕木法会出现管道屈曲段应力集中的现象,对比了枕木法、分布浮力法和枕木-浮力耦合法对管道整体屈曲变形规律的影响,采用数值模拟方法系统研究了枕木及浮力参数对管道水平向屈曲和后屈曲的影响规律。研究表明,在枕木两侧设置浮力段的人工触发装置可有效触发管道整体屈曲,同时促使管道虚拟锚固点间轴力的释放,降低了管道中屈曲段的应力,相较枕木法,枕木-浮力耦合法可将管道中的最大应力降低23%。 相似文献
12.
Submarine pipelines are the primary component of an offshore oil transportation system. Under operating conditions, a pipeline is subjected to high temperatures and pressures to improve oil mobility. As a result, additional stress accumulates in pipeline sections, which causes global buckling. For an exposed deep-water pipeline, lateral buckling is the major form of this global buckling. Large lateral displacement causes a very high bending moment which may lead to a local buckling failure in the pipe cross-section. This paper proposes a lateral global buckling failure envelope for deep-water HT/HP pipelines using a numerical simulation analysis. It analyzes the factors influencing the envelope, including the thickness t, diameter D, soil resistance coefficient μ, calculating length Lf, imperfection length L and imperfection amplitude V. Equations to calculate the failure envelope are established to make future post-buckling pipeline failure assessment more convenient. The results show that (1) the limit pressure difference pmax (the failure pressure difference for a post-buckling pipeline when it suffers no difference in temperature) is usually below the burst pressure difference pb (which is the largest pressure difference a pipeline can bear and is determined from the strength and sectional dimensions of the pipeline) and is approximately 0.62–0.75 times the value of pb and (2) thickness t has little influence on the normalized envelopes, but affects pmax. The diameter D, soil resistance coefficient μ, and calculating length Lf influence the maximum failure temperature difference Tmax (the failure temperature difference for a pipeline suffering no pressure difference). The diameter D also significantly affects the form of the normalized envelope. 相似文献
13.
Offshore pipelines operating under high pressure and temperature are subjected to upheaval buckling. Pipeline behaviour in upheaval buckling depends on a number of factors including the shape of pipeline imperfection, installation stresses, loading types, seabed sediment behaviour and the flexural stiffness of the pipe. Current method of predicting upheaval buckling is based on simplified shapes of pipeline imperfection developed for idealized seabed conditions. To account for the effect of internal pressure, the pressure load is represented using an equivalent temperature. However, the applicability of these idealizations on the prediction of upheaval buckling has not been well-investigated. In this paper, the three-dimensional finite element modelling technique is used to investigate the applicability of idealized shapes and their effects on the upheaval buckling of pipeline for a seabed condition at offshore Newfoundland in Canada. The finite element model is then used to conduct a parametric study to investigate the effects of installation stress, loading types, seabed parameters and the flexural stiffness of the pipe. Finally, a design chart is developed to determine the optimum height of seabed features to manage pipeline stability against upheaval buckling under different temperature and pressure loadings. 相似文献
14.
Offshore oil and gas exploration are gradually heading toward the deep sea and even the ultra-deep sea. According, the working temperature and pressure intensity of subsea oil and gas pipelines have increased by a considerable degree. This situation is accompanied by the global buckling problem in deep sea pipelines, which has become increasingly common. Meanwhile, ordinary single-layer pipelines cannot last for a long time under harsh deep-sea working conditions. Thus, multilayer pipelines, such as the pipe-in-pipe (PIP) structure and bundled pipelines, have gradually become top choices. However, the global buckling mechanisms of these multilayer pipelines are more complicated than those of single-layer pipelines. The sleeper–snake lay pipeline, which is an active control method for global buckling, was used in this study. The change and development laws of global buckling in a PIP structure at different wavelengths and amplitudes were determined through an experimental study. A dynamic solution method that considers artificial damping was adopted to establish finite element global buckling models of a PIP structure with initial imperfections. The effects of various factors, such as pipeline laying shape, sleeper–pipe function, and seabed–pipe function, on global buckling were analyzed. By the result of finite element method analysis, the initial imperfection, and sleeper–pipeline friction were determined to be the key factors that influenced critical pipeline buckling force. Accordingly, a reference for the design of PIP structures is presented. 相似文献
15.
鉴于海底管道的服役水深越来越深,主要采用犁式挖沟机对预铺设于海床之上的海底管道采取后挖沟的方式将海底管道埋设于海床之下,以保护其免受不必要的损伤。针对后挖沟深度H是海底挖沟机的重要设计参数,也是影响管道悬跨的重要因素的问题,对SMD(UK)犁式挖沟机展开参数优化,确保作业过程中悬跨段管道在外部静水压力作用下,海底管道不会发生屈曲破坏。采用ABAQUS软件,分别建立了作业前和作业中两种工况下的悬跨模型,分析机械手对接触部分管道的损伤,结果显示,作业中的机械手对悬跨管道的损伤更大;同时,建立了作业中不同管径下,后挖沟深度对管道损伤的安全裕量关系曲线。进一步,结合作业中不同挖沟深度下的管跨段屈曲数值模型,对处于外部静水压力作用下的悬跨管的屈曲失效展开分析,结果显示,随着后挖沟深度的加大,不同管径下的悬跨段管道局部出现塑性压溃的临界压力值不断降低;管道外径的增大,降低了同一后挖沟深度下发生屈曲失效的压力值。最后,在后挖沟深度与外部静水压力组成的区域内,建立屈曲失效临界关系曲线,并划分出工作区和压溃区,为深海管道后挖沟埋管的施工提供工程参考。 相似文献
16.
Buckle propagation in pipelines with non-uniform thickness 总被引：1，自引：0，他引：1
Finite element solutions for the steady-state buckle propagation pressure in a pipeline with non-uniform thickness are given. The results are useful in finding buckle propagation pressures in corroded pipelines. It has been found that when corrosion is equal to or less than 10% of the original pipeline thickness, the pipeline collapses in an overall shell buckling mode; otherwise, the pipeline experiences local buckling. The propagation pressure decreases with both the thickness and angular extent of the reduced section, but the rate of decrease with thickness reduction is almost independent of the angular extent of corrosion when it is greater than 90°. 相似文献
17.
18.
The winding and unwinding of a pipeline onto a large diameter reel as practiced in the reeling installation method, induces bending strains of 1–3% followed by straightening, and reverse bending. The operator must ensure that such plastic deformations are sustained free of local buckling or rupture in the line. Such failures are for example precipitated by pipeline discontinuities in wall thickness and yield stress as they act as stress risers, lead to localized deformations severe enough to result in local buckling. The effect of such discontinuities is studied using a large-scale nonlinear finite element model that simulates the reeling/unreeling of a pipeline. Nonlinear kinematic hardening is used to capture the elasto-plastic behavior of the material imposed by the bending/reverse bending history. Discontinuities in wall thickness and yield stress are shown to result in sharp local changes in curvature that extend over 3–4 pipe diameters accompanied by severe local straining and ovalization. The extent of the disturbance is governed by the bending strain imposed by the ratio of pipe to reel diameter. It can be reduced by an increase in the applied tension but at the expense of additional ovalization of the pipeline. It can also be reduced by increasing the pipe wall thickness but with the consequent increase in costs. A parametric study of the effect of such discontinuities demonstrates that for some combinations of process parameters, the disturbance can lead to local buckling either during winding or unwinding. It is concluded that a modeling framework such as the one presented should be used to generate a design protocol for reel-installed pipelines. 相似文献
19.
Experimental investigations are carried out on wave-induced pressures and uplift forces on a submarine pipeline (exposed, half buried and fully buried) in clayey soil of different consistency index both in regular and random waves. A study on scour under the pipeline resting on the clay bed is also carried out. It is found that the uplift force can be reduced by about 70%, if the pipeline is just buried in clay soil. The equilibrium scour depth below the pipeline is estimated as 42% of the pipe diameter for consistency index of 0.17 and is 34% of the pipe diameter for consistency index of 0.23. The results of the present investigations are compared with the results on sandy soil by Cheng and Liu (Appl. Ocean Res., 8(1986) 22) to acknowledge the benefit of cohesive soil in reducing the high pore pressure on buried pipeline compared to cohesionless soil. 相似文献
20.
利用东海陆架海底输油管道路由调查获得的孔压静力触探数据和钻探资料等,采用统计分析的方法,对管道路由区5 m以浅土体的孔压静力触探曲线特征、土的分类方法鉴别作了探讨,结果表明:研究区5 m以浅黏性土的锥尖阻力(qc),侧摩阻力(fs)值较小,且随深度呈线性增加,粉质土的qc,fs值增大,但随深度线性增加规律不明显,砂类土的qc值急剧增大,但fs值变化不大;Robertson法和Eslami-Fellenius法两种土类划分方法均适用于研究区浅表层软土的土类划分,但Robertson法在判别粉质土时受到一定限制,Eslami-Fellenius法判别较为准确,应用简单。本研究可为我国在海底管线工程路由勘察中直接利用孔压静力触探(CPTU)参数划分土层和判别土类作铺垫。 相似文献