共查询到17条相似文献，搜索用时 109 毫秒
1.
等效水深截断是混合模型试验中非常重要的一步,合理的截断方案是模型试验成功的前提。现有的研究大多忽略对平台转动的考虑,该文在静态相似准则的基础上增加对平台转动的考虑,推导了系泊系统回复力和转矩的计算公式,建立了满足静态一致性的目标函数,进而采用粒子群算法进行等效水深截断优化设计。以某深水半潜式平台为例,首先在不考虑转动的情况下对其系泊系统进行等效截断,研究发现截断水深的变化对转矩的优化结果影响较大,从而证明了平台转动是应该考虑的。其次在考虑转动的情况下对系泊系统进行等效截断,通过水动力软件验证所优化的结果,证明该方法的可行性,为后续的等效水深截断优化设计的研究提供参考。 相似文献
2.
3.
4.
海洋环境要素计算不确定性分析 总被引：1，自引：0，他引：1
以一艘现役起重船为研究对象,对其进行不同水深(46 m和36 m),缩尺比1∶50的模型试验。采用基于二次传递函数QTF的时域准静态分析法对实际尺度起重船与系泊系统进行耦合数值分析,并与试验结果进行比较。结果表明,当水深变浅时,浅水对二阶载荷的影响是系泊力明显的主要因素,浅水对一阶载荷的影响有限。在保持系泊系统刚度线性不随水深变化的前提下进行了三个水深吃水比的数值模拟计算,结果表明,对于系泊起重船,随着水深的减小,二阶定常力有所增大;浅水对差频载荷的影响在30 m水深(吃水水深比d/h=0.27)时变得明显。对于浅水系泊系统的相关分析需要充分考虑水深对二阶慢漂运动的影响,保证系泊系统的安全。 相似文献
5.
6.
7.
8.
为揭示张力腿平台涡激运动响应规律,采用数值模拟与模型试验相结合的方法研究了全水深系泊张力腿平台涡激运动响应。根据张力腿平台主尺度参数,按照几何相似制作了水池试验模型,在满足运动相似和动力相似的条件下开展了均匀流、剖面流模型试验,并将模型试验结果与数值模拟结果进行了对比,验证了数值模拟与模型试验结果的一致性。分析结果表明在均匀流作用下张力腿平台涡激运动的锁定区间在5.5<Ur<8.5,来流角对涡激运动影响较大。剖面流作用下平台涡激运动规律与均匀流作用基本一致,但剖面流造流引起的能量分散,使平台在XY平面的运动轨迹变得不规律,系泊系统提供的回复力对涡激运动幅值有抑制作用,来流角和流速对张力腿或立管模态影响明显。论文得到结论对于张力腿平台的工程设计有一定借鉴意义。 相似文献
9.
针对渤海浅水边际油田的开采,提出了一种自调节外转塔单点系泊方式。此方案可根据水深调节锚链和配重分布,结合了单点系泊和多点系泊的优点,首部设置外转塔,海底用分布式锚链系泊,提高了系统运动的弹性空间。对该设计进行了理论分析、数值计算和模型试验。结果显示,数值计算和模型试验数据接近,系泊力和纵荡的最大误差分别为4.5%和7.05%,说明方案设计的计算依据合理。试验数据表明,系泊力和水平运动幅度较小,值得进一步研究或向工程推广。 相似文献
10.
近年来,深水半潜平台已成为海洋工程领域研究的热点。分别通过模型试验和数值模拟的方法,对不同水深和浪向条件下作业的深水半潜平台的运动以及系泊系统的受力进行全面分析。在此基础上,进一步研究平台在深水作业时的运动和动力特性,以及水深和环境海况的变化对平台运动和系泊系统受力的影响规律。同时,对比完整系泊系统的情况,对一根系泊缆破断的极端状态下平台的特性开展研究,获得运动和系泊系统受力的变化规律。对比发现试验和数值的结果能较好地相互吻合,且均能满足相应的安全度要求,保证平台实际作业时的可靠性,为深水半潜平台设计中的安全极限计算提供一定的依据。 相似文献
11.
Optimal Design of Equivalent Water Depth Truncated Mooring System Based on Baton Pattern Simulated Annealing Algorithm简 总被引：2，自引：2，他引：0
The highest similarity degree of static characteristics including both horizontal and vertical restoring force-displacement characteristics of total mooring system, as well as the tension-displacement characteristics of the representative single mooring line between the truncated and full depth system are obtained by annealing simulation algorithm for hybrid discrete variables （ASFHDV, in short）. A“baton” optimization approach is proposed by utilizing ASFHDV. After each baton of optimization, if a few dimensional variables reach the upper or lower limit, the boundary of certain dimensional variables shall be expanded. In consideration of the experimental requirements, the length of the upper mooring line should not be smaller than 8 m, and the diameter of the anchor chain on the bottom should be larger than 0.03 m. A 100000 t turret mooring FPSO in the water depth of 304 m, with the truncated water depth being 76 m, is taken as an example of equivalent water depth truncated mooring system optimal design and calculation, and is performed to obtain the conformation parameters of the truncated mooring system. The numerical results indicate that the present truncated mooring system design is successful and effective. 相似文献
12.
Hybrid model testing technique is widely used in verification of a deepwater floating structure and its mooring system,but the design of the truncated mooring systems which can reproduce both static and dynamic response same as the full-depth mooring system is still a big challenge,especially for the mooting systems with large truncation.A Cell-Tress Spar operated in 1500 m water depth is verified in a wave basin with 4 m water depth.A large truncation factor arises even though a small model scale 1:100 is adopted.Computer program modules for analyzing the static and frequency domain dynamic response of mooting line are combined with multi-objective genetic algorithm NSGA-II to optimize the truncared mooting system.Considering the asymmetry of layout of mooring hnes,two different truncated mooring systems are respectively designed for both directions in which the restoring forces of the.mooting system are quite,different.Not only the static characteristics of the mooting systems are calibrated,but also the dynamic responses of the single truncated mooting line are evaluated through time domain numerical simulation and model tests.The model test results of 100-year storm in the GOM are reconstructed and extrapolated to a full depth.It is found that the experimental and numerical resuits of Spar wave frequency motion agree well,and the dynamic responses of the full-depth mooring lines are better reproduced,but the low frequency surge motion is overestimated due to the smaller mooring-induced damping.It is a feasible method adopting different truncated mooring systems for different directions in which the restoring force characteristics are quite different and cannot be simulated by one truncated mooring system.Hybrid verification of a deepwater platform in wave basin with shallow water depth is still feasible if the truncated mooring systems are properly designed,and numerical extrapolation is necessary. 相似文献
13.
Dynamics of large-truncated mooring systems coupled with a catenary moored semi-submersible 总被引：2，自引：2，他引：0
With the floating structures pushing their activities to the ultra-deep water,model tests have presented a challenge due to the limitation of the existing wave basins.Therefore,the concept of truncated mooring system is implemented to replace the full depth mooring system in the model tests,which aims to have the same dynamic responses as the full depth system.The truncated mooring system plays such a significant role that extra attention should be paid to the mooring systems with large truncation factor.Three different types of large truncation factor mooring system are being employed in the simulations,including the homogenously truncated mooring system,non-homogenously truncated mooring system and simplified truncated mooring system.A catenary moored semi-submersible operating at 1000 m water depth is presented.In addition,truncated mooring systems are proposed at the truncated water depth of 200 m.In order to explore the applicability of these truncated mooring systems,numerical simulations of the platform’s surge free decay interacting with three different styles of truncated mooring systems are studied in calm water.Furthermore,the mooring-induced damping of the truncated mooring systems is simulated in the regular wave.Finally,the platform motion responses and mooring line dynamics are simulated in irregular wave.All these simulations are implemented by employing full time domain coupled dynamic analysis,and the results are compared with those of the full depth simulations in the same cases.The results show that the mooring-induced damping plays a significant role in platform motion responses,and all truncated mooring systems are suitable for model tests with appropriate truncated mooring line diameters.However,a large diameter is needed for simplified truncated mooring lines.The suggestions are given to the selection of truncated mooring system for different situations as well as to the truncated mooring design criteria. 相似文献
14.
Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line 
下载免费PDF全文
下载免费PDF全文 The real-time computer-controlled actuators are used to connect the truncated parts of moorings and risers in the active hybrid model testing system. This must be able to work in model-scale real time, based on feedback input from the floater motions. Thus, mooring line dynamics and damping effects are artificially simulated in real time, based on a computer-based model of the problem. In consideration of the nonlinear characteristics of the sea platform catenary mooring line, the equations of the mooring line motion are formulated by using the lumped-mass method and the dynamic response of several points on the mooring line is investigated by the time and frequency domain analysis method. The dynamic response of the representative point on the mooring line is analyzed under the condition of two different corresponding upper endpoint movements namely sine wave excitation and random wave excitation. The corresponding laws of the dynamic response between the equivalent water depth truncated points at different locations and the upper endpoint are obtained, which can provide technical support for further study of the active hybrid model test. 相似文献
15.
Hydrodynamic performance of an ultra deep turret-moored Floating Liquefied Natural Gas(FLNG) system is investigated.Hydrodynamic modeling of a turret-moored FLNG system,in consideration of the coupling effects of the vessel and its mooring lines,has been addressed in details.Based on the boundary element method,a 3-D panel model of the FLNG vessel and the related free water surface model are established,and the first-order and second-order mean-drift wave loads and other hydrodynamic coefficients are calculated.A systematic model test program consisting of the white noise wave test,offset test and irregular wave test combined with current and wind,etc.is performed to verify the numerical model.Owing to the depth limit of the water basin,the model test is carried out for the hydrodynamics of the FLNG coupled with only the truncated mooring system.The numerical simulation model features well the hydrodynamic performance of the FLNG system obtained from the model tests.The hydrodynamic characteristics presented in both the numerical simulations and the physical model tests would serve as the guidance for the ongoing project of FLNG system. 相似文献
16.
A method to predict typhoon waves 总被引：2，自引：0，他引：2
Yang Chuncheng Dai Mingrui Gao Zhihu Cheng Zhan Xu Fuxiang Liu Yu Li Fengjin Li Jie Su Dongfu Zhang Dacuo Xu Qichun 《海洋学报(英文版)》1995,14(2):167-180
Ａｍｅｔｈｏｄｔｏｐｒｅｄｉｃｔｔｙｐｈｏｏｎｗａｖｅｓ￥ＹａｎｇＣｈｕｎｃｈｅｎｇ；ＤａｉＭｉｎｇｒｕｉ；ＧａｏＺｈｉｈｕａ；ＣｈｅｎｇＺｈａｎ；ＸｕＦｕｘｉａｎｇ；ＬｉｕＹｕ；ＬｉＦｅｎｇｊｉｎ；ＬｉＪｉｅ；ＳｕＤｏｎｇｆｕ；ＺｈａｎｇＤａｃｕｏ... 相似文献
17.
《中国海洋工程》2021,(4)
This study numerically and experimentally investigates the effects of wave loads on a monopile-type offshore wind turbine placed on a 1: 25 slope at different water depths as well as the effect of choosing different turbulence models on the efficiency of the numerical model. The numerical model adopts a two-phase flow by solving Unsteady Reynolds-Averaged Navier-Stokes(URANS) equations using the Volume Of Fluid(VOF) method and three different turbulence models. Typical environmental conditions from the East China Sea are studied. The wave run-up and the wave loads applied on the monopile are investigated and compared with relevant experimental data as well as with mathematical predictions based on relevant theories. The numerical model is well validated against the experimental data at model scale. The use of different turbulence models results in different predictions on the wave height but less differences on the wave period. The baseline turbulence model and Shear-Stress Transport(SST) turbulence model exhibit better performance on the prediction of hydrodynamic load, at a model-scale water depth of 0.42 m, while the laminar model provides better results for large water depths. The SST turbulence model performs better in predicting wave run-up for water depth 0.42 m, while the laminar model and standard model perform better at water depth 0.52 m and 0.62 m, respectively. 相似文献