共查询到20条相似文献，搜索用时 31 毫秒
1.
Comparison of surface current variations observed by TOPEX altimeter with TOLEX-ADCP data 总被引：1，自引：0，他引：1
Variations of surface current velocity derived by the TOPEX altimeter are compared with data from Tokyo-Ogasawara Line Experiment (TOLEX)-Acoustic Doppler Current Profiler (ADCP) monitoring for a period from October 1992 to July 1993. Since the locations of ADCP ship track and TOPEX altimeter ground tracks do not coincide with each other, and the temporal and spatial sampling are also different between the ADCP and altimeter observations, re-sampling, interpolation and smoothing in time and space are needed to the ADCP and altimeter data. First, the interpolated TOPEX sea surface height is compared with sea level data at Chichijima in the Ogasawara Islands. It is found that aliasing caused by the tidal correction error for M2 constituent in the TOPEX data is significant. Therefore, comparison of the TOPEX data with the TOLEX-ADCP data is decided to be made by using cross-track velocity components of the surface current, which are considered to be relatively less affected by the errors in the tidal correction. The cross-track velocity variations derived from the TOPEX sea surface heights agree well with those of the ADCP observations. The altimeterderived velocity deviations associated with transition of the Kuroshio paths coincide with the ADCP data. It is quantitatively confirmed that the TOPEX altimeter is reliable to observe the synoptic variations of surface currents including fluctuations of the Kuroshio axis. 相似文献
2.
Chung-Yen Kuo Huan-Chin Kao Hyongki Lee Kai-Chien Cheng Li-Ching Lin 《Marine Geodesy》2013,36(2):188-197
This study focuses on assessing the accuracy of 20-Hz waveform retracked Jason-2 (J-2) altimetry sea surface heights (SSHs) in the vicinity of Taiwan by comparisons with the TOPEX/Poseidon (T/P) 10-Hz SSHs and sea level data from the Anping tide gauge. The study areas exhibit high, medium, and low amplitudes of ocean tides and contain diverse bathymetries with depths of 0–4000 m. The performance of Offset Center of Gravity (OCOG), threshold, modified threshold, and ice retrackers was examined by comparing the retracked SSHs with Earth Gravitational Model 2008 (EGM08) geoid via the use of the improvement percentages (IMPs). The results indicate that both altimetry measurements are significantly improved by waveform retracking techniques, with a maximum IMP of 46.6% for T/P and 82.0% for J-2, and the optimal achievement of retrackers is influenced by the characteristics of the study areas. In addition, valid retracked J-2 SSHs are much closer to shorelines than T/P. A comparison of retracked J-2 data with Anping tide gauge records reveals that applying the optimal retracking algorithms reduces the root mean squares of differences and increases the number of valid measurements. 相似文献
3.
Calibration of TOPEX/Poseidon and Jason Altimeter Data to Construct a Continuous Record of Mean Sea Level Change 总被引：10，自引：0，他引：10
Jason, the successor to the TOPEX/POSEIDON (T/P) mission, has been designed to continue seamlessly the decade-long altimetric sea level record initiated by T/P. Intersatellite calibration has determined the relative bias to an accuracy of 1.6 mm rms. Tide gauge calibration of the T/P record during its original mission shows a drift of -0.1 ± 0.4 mm/year. The tide gauge calibration of 20 months of nominal Jason data indicates a drift of -5.7 ± 1.0 mm/year, which may be attributable to errors in the orbit ephemeris and the Jason Microwave Radiometer. The analysis of T/P and Jason altimeter data over the past decade has resulted in a determination of global mean sea level change of +2.8 ± 0.4 mm/year. 相似文献
4.
Ocean Tide Models Developed by Assimilating TOPEX/POSEIDON Altimeter Data into Hydrodynamical Model: A Global Model and a Regional Model around Japan 总被引：36，自引：0，他引：36
A global ocean tide model (NAO.99b model) representing major 16 constituents with a spatial resolution of 0.5° has been estimated by assimilating about 5 years of TOPEX/POSEIDON altimeter data into barotropic hydrodynamical model. The new solution is characterized by reduced errors in shallow waters compared to the other two models recently developed; CSR4.0 model (improved version of Eanes and Bettadpur, 1994) and GOT99.2b model (Ray, 1999), which are demonstrated in comparison with tide gauge data and collinear residual reduction test. This property mainly benefits from fine-scale along-track tidal analysis of TOPEX/POSEIDON data. A high-resolution (1/12°) regional ocean tide model around Japan (NAO.99Jb model) by assimilating both TOPEX/POSEIDON data and 219 coastal tide gauge data is also developed. A comparison with 80 independent coastal tide gauge data shows the better performance of NAO.99Jb model in the coastal region compared with the other global models. Tidal dissipation around Japan has been investigated for M2 and K1 constituents by using NAO.99Jb model. The result suggests that the tidal energy is mainly dissipated by bottom friction in localized area in shallow seas; the M2 ocean tidal energy is mainly dissipated in the Yellow Sea and the East China Sea at the mean rate of 155 GW, while the K1 energy is mainly dissipated in the Sea of Okhotsk at the mean rate of 89 GW. TOPEX/POSEIDON data, however, detects broadly distributed surface manifestation of M2 internal tide, which observationally suggests that the tidal energy is also dissipated by the energy conversion into baroclinic tide. 相似文献
5.
6.
本文对比了3个不同机构提供的北冰洋月均高度计数据,发现英国极地观测与建模中心和丹麦科技大学空间中心两套数据比较一致且空间覆盖率高,适用于北冰洋海平面变化研究,而前者在数据分辨率、平滑性和与验潮站的符合程度方面均更优。对高度计和验潮站数据的分析表明,北冰洋海平面的气候态特征表现为加拿大海盆的高值和欧亚海盆的低值之间形成鲜明对比;海平面的变化以季节变化和北极涛动引起的低频变化为主,加拿大海盆的季节和年际振幅均较大,俄罗斯沿岸海平面季节变化显著。2003?2014年,北冰洋平均海平面呈上升趋势,其中加拿大海盆海平面上升最快,而俄罗斯沿岸海平面有微弱下降趋势。加拿大海盆和俄罗斯沿岸由于海冰变化显著,不同高度计产品以及高度计与验潮站数据之间差别较大,使用时需慎重。 相似文献
7.
This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1–61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist. 相似文献
8.
This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1-61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist. 相似文献
9.
Vertical Land Motion in the Mediterranean Sea from Altimetry and Tide Gauge Stations 总被引：1，自引：0，他引：1
We have computed estimates of the rate of vertical land motion in the Mediterranean Sea from differences of sea level heights measured by the TOPEX/Poseidon radar altimeter and by a set of tide gauge stations. The comparison of data at 16 tide gauges, using both hourly data from local datasets and monthly data from the PSMSL dataset, shows a general agreement, significant differences are found at only one location. Differences of near-simultaneous, monthly and deseasoned monthly sea level height time-series have been considered in order to reduce the error in the estimated linear-term. In a subset of 23 tide gauge stations the mean accuracy of the estimated vertical rates is 2.3 ± 0.8 mm/yr. Results for various stations are in agreement with estimates of vertical land motion from geodetic methods. A comparison with vertical motion estimated by GPS at four locations shows a mean difference of ?0.04 ± 1.8 mm/yr, however the length of the GPS time-series and the number of locations are too small to draw general conclusions. 相似文献
10.
Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work. 相似文献
11.
Tidal Correction of Altimetric Data in the Japan Sea 总被引：2，自引：0，他引：2
Satellite altimetric data have been very useful in the study of variation in the eddy field of the ocean. In order to investigate the variation in the eddy field, we have to remove tidal signals from altimetric data. However, global tidal models do not have sufficient accuracy in marginal seas such as the Japan Sea. In this study, we carried out harmonic analysis of temporal fluctuations of sea surface height data in the Japan Sea measured by TOPEX/POSEIDON. We could eliminate the tidal signals from altimetric data of TOPEX/POSEIDON and also from ERS-2 altimetric data with use of the harmonic constants derived from TOPEX/POSEIDON and tide gauge data along the coast. We draw co-tidal and co-range charts in the Japan Sea using the result of the harmonic analysis of TOPEX/POSEIDON altimetric data and tide gauge data along the coast. The results obtained turn out to be very useful for the tidal correction of altimetric data from satellite in the Japan Sea. 相似文献
12.
We have computed estimates of the rate of vertical land motion in the Mediterranean Sea from differences of sea level heights measured by the TOPEX/Poseidon radar altimeter and by a set of tide gauge stations. The comparison of data at 16 tide gauges, using both hourly data from local datasets and monthly data from the PSMSL dataset, shows a general agreement, significant differences are found at only one location. Differences of near-simultaneous, monthly and deseasoned monthly sea level height time-series have been considered in order to reduce the error in the estimated linear-term. In a subset of 23 tide gauge stations the mean accuracy of the estimated vertical rates is 2.3 ± 0.8 mm/yr. Results for various stations are in agreement with estimates of vertical land motion from geodetic methods. A comparison with vertical motion estimated by GPS at four locations shows a mean difference of -0.04 ± 1.8 mm/yr, however the length of the GPS time-series and the number of locations are too small to draw general conclusions. 相似文献
13.
Narendra K. Saxena 《Marine Geophysical Researches》1984,7(1-2):277-282
The Subtropical Atlantic Climate Study (STACS) is a subprogram in the NOAA climate program designed to access the feasibility
of monitoring horizontal fluxes in the Gulf Stream system off Florida. Transport in the Florida Current fluctuates on time
scales which are reflected in sea level records monitored at tide gauges. Geodetic leveling, connecting tide gauges along
the east coast of the United States, allows intercomparison of sea level records alongstream, but the cross-stream and alongstream
records in the Bahamas and Cuba are not connected. In this study, various methods to determine absolute sea level differences
across the Straits of Florida between Miami, Florida and Cat Cay, Bahamas, a part of the STACS area, were investigated; the
desired accuracy of the sea level difference is ± 1 cm. This study indicates that a combination of dense gravity data with
satellite altimeter (TOPEX and GEOSAT) data in the STACS area could provide a ± 1 cm absolute sea level difference accuracy
across the Straits of Florida. This paper also provides discussion of other conventional methods. 相似文献
14.
Gary T. Mitchum 《Marine Geodesy》2013,36(3):145-166
Several major improvements to an existing method for calibrating satellite altimeters using tide gauge data are described. The calibration is in the sense of monitoring and correcting temporal drift in the altimetric time series, which is essential in efforts to use the altimetric data for especially demanding applications. Examples include the determination of the rate of change of global mean sea level and the study of the relatively subtle, but climatically important, decadal variations in basin scale sea levels. The improvements are to the method described by Mitchum (1998a), and the modifications are of two basic types. First, since the method depends on the cancellation of true ocean signals by differencing the altimetric data from the tide gauge sea level time series, improvements are made that produce a more complete removal of the ocean signals that comprise the noise for the altimetric drift estimation problem. Second, a major error source in the tide gauge data, namely land motion, is explicitly addressed and corrections are developed that incorporate space-based geodetic data (continuous GPS and DORIS measurements). The long-term solution, having such geodetic measurements available at all the tide gauges, is not yet a reality, so an interim solution is developed. The improved method is applied to the TOPEX altimetric data. The Side A data (August 1992?February 1999) are found to have a linear drift component of 0.55 + / 0.39 mm/yr, but there is also a significant quadratic component to the drift that is presently unexplained. The TOPEX Side B altimeter is estimated to be biased by 7.0 + / 0.7 mm relative to the Side A altimeter based on an analysis of the first 350 days of Side B data. 相似文献
15.
An Improved Calibration of Satellite Altimetric Heights Using Tide Gauge Sea Levels with Adjustment for Land Motion 总被引：2，自引：0，他引：2
Gary T. Mitchum 《Marine Geodesy》2000,23(3):145-166
Several major improvements to an existing method for calibrating satellite altimeters using tide gauge data are described. The calibration is in the sense of monitoring and correcting temporal drift in the altimetric time series, which is essential in efforts to use the altimetric data for especially demanding applications. Examples include the determination of the rate of change of global mean sea level and the study of the relatively subtle, but climatically important, decadal variations in basin scale sea levels. The improvements are to the method described by Mitchum (1998a), and the modifications are of two basic types. First, since the method depends on the cancellation of true ocean signals by differencing the altimetric data from the tide gauge sea level time series, improvements are made that produce a more complete removal of the ocean signals that comprise the noise for the altimetric drift estimation problem. Second, a major error source in the tide gauge data, namely land motion, is explicitly addressed and corrections are developed that incorporate space-based geodetic data (continuous GPS and DORIS measurements). The long-term solution, having such geodetic measurements available at all the tide gauges, is not yet a reality, so an interim solution is developed. The improved method is applied to the TOPEX altimetric data. The Side A data (August 1992?February 1999) are found to have a linear drift component of 0.55 + / 0.39 mm/yr, but there is also a significant quadratic component to the drift that is presently unexplained. The TOPEX Side B altimeter is estimated to be biased by 7.0 + / 0.7 mm relative to the Side A altimeter based on an analysis of the first 350 days of Side B data. 相似文献
16.
Hiroshi Kuroda Manabu Shimizu Yuuichi Hirota Hideki Akiyama 《Journal of Oceanography》2007,63(5):849-862
Through analysis of monthly in situ hydrographic, tide gauge, altimetry and Kuroshio axis data for the years 1993–2001, the intraannual variability of sea level
around Tosa Bay, Japan, with periods of 2–12 months is examined together with the intraannual variability of the Kuroshio
south of the bay. It is shown that the intraannual variation of steric height on the slope in Tosa Bay can account for that
of sea level at the coast around the bay as well as on this slope. It is found that the steric height (or sea level) variation
on the slope in this bay is mainly controlled by the subsurface thermal variation correlated with the Kuroshio variation off
Cape Ashizuri, the western edge of Tosa Bay. That is, when the nearshore Kuroshio velocity south of the cape is intensified
[weakened] concurrently with the northward [southward] displacement of the current axis, temperature in an entire water column
decreases [increases] simultaneously, mainly due to the upward [downward] displacement of isotherms, coincident with that
of the main thermocline. It follows that the steric height (or sea level) decreases [increases]. 相似文献
17.
Satellite altimetry observations and tide gauge data are invaluable tools to diagnose and resolve tidal constituents over the Oceans and Seas. The aim of this study is to introduce a new purely empirical tide model named TM-IR01 in the Persian Gulf, Oman Sea, and North Indian Ocean. The observations of three altimeter sensors including TOPEX/POSIDON, JASON1, and JASON2 and 13 coastal tide gauge (TG) stations are processed and analyzed in this research. First of all, the least square spectral analysis is utilized to recover the significant tide components and consequently the amplitude and phases of the constituents are found during the tide modeling. Finally, the analysis results are interpolated into a grid of 1/4° using the Kriging method. TM-IR01 model is validated by comparing with TG stations and global tide models. It is shown that for main tidal frequencies M2, S2, K1, and O1 the root mean square error (RMSE) between TM-IR01 and TG stations results are 0.372, 0.130, 0.141, and 0.084?m, respectively, and also the RMSE between TM-IR01 and FES2004 models are 0.231, 0.087, 0.027, and 0.042?m, respectively. Validating with FES2012 and Tpxo7.2, the results obtained are close to the above values. 相似文献
18.
We present an improved crossover adjustment procedure to determine mean sea surface height using TOPEX, 35-day repeat phase ERS-1, Geosat, and 168-day repeat phase ERS-1 satellite altimeter data. The mean sea surface frame defined by the TOPEX data is imposed as certain constraints in our crossover adjustment procedure rather than held fixed as in some other procedures. The new procedure is discussed in detail. Equations are developed to incorporate the a priori information of Topex data as well as other satellite altimeter data. The numerical computation result shows that the rms crossover discrepancies are reduced by an order of 1 cm when the Topex data is not fixed. Furthermore, the computed mean sea surface is less noisy and more realistic than that computed by the traditional procedure. 相似文献
19.
TAI Chang-Kou 《海洋学报(英文版)》2011,30(4):102-106
An attempt is made to infer the global mean sea level(GMSL) from a global tide gauge network and frame the problem in terms of the limitations of the network. The network,owing to its limited number of gauges and poor geographical distribution complicated further by unknown vertical land movements,is ill suited for measuring the GMSL. Yet it remains the only available source for deciphering the sea level rise over the last 100 a. The poor sampling characteristics of the tide gauge network have necessitated the usage of statistical inference. A linear optimal estimator based on the Gauss-Markov theorem seems well suited for the job. This still leaves a great deal of freedom in choosing the estimator. GMSL is poorly correlated with tide gauge measurements because the small uniform rise and fall of sea level are masked by the far larger regional signals. On the other hand,a regional mean sea level(RMSL) is much better correlated with the corresponding regional tide gauge measurements. Since the GMSL is simply the sum of RMSLs,the problem is transformed to one of estimating the RMSLs from regional tide gauge measurements. Specifically for the annual heating and cooling cycle,we separate the global ocean into 10-latitude bands and compute for each 10-latitude band the estimator that predicts its RMSL from tide gauges within. In the future,the statistical correlations are to be computed using satellite altimetry. However,as a first attempt,we have used numerical model outputs instead to isolate the problem so as not to get distracted by altimetry or tide gauge errors. That is,model outputs for sea level at tide gauge locations of the GLOSS network are taken as tide gauge measurements,and the RMSLs are computed from the model outputs. The results show an estimation error of approximately 2 mm versus an error of 2.7 cm if we simply average the tide gauge measurements to estimate the GMSL,caused by the much larger regional seasonal cycle and mesoscale variation plaguing the individual tide gauges. The numerical model,Los Alamos POP model Run 11 lasting 3 1/4 a,is one of the best eddy-resolving models and does a good job simulating the annual heating and cooling cycle,but it has no global or regional trend. Thus it has basically succeeded in estimating the seasonal cycle of the GMSL. This is still going to be the case even if we use the altimetry data because the RMSLs are dominated by the seasonal cycle in relatively short periods. For estimating the GMSL trend,longer records and low-pass filtering to isolate the statistical relations that are of interest. Here we have managed to avoid the much larger regional seasonal cycle plaguing individual tide gauges to get a fairly accurate estimate of the much smaller seasonal cycle in the GMSL so as to enhance the prospect of an accurate estimate of GMSL trend in short periods. One should reasonably expect to be able to do the same for longer periods during which tide gauges are plagued by much larger regional interannual(e. g.,ENSO events) and decadal sea level variations. In the future,with the availability of the satellite altimeter data,we could use the same approach adopted here to estimate the seasonal variations of GMSL and RMSL accurately and remove these seasonal variations accordingly so as to get a more accurate statistical inference between the tide gauge data and the RMSLs(therefore the GMSL) at periods longer than 1 a,i. e.,the long-term trend. 相似文献
20.
We present an improved crossover adjustment procedure to determine mean sea surface height using TOPEX, 35-day repeat phase ERS-1, Geosat, and 168-day repeat phase ERS-1 satellite altimeter data. The mean sea surface frame defined by the TOPEX data is imposed as certain constraints in our crossover adjustment procedure rather than held fixed as in some other procedures. The new procedure is discussed in detail. Equations are developed to incorporate the a priori information of Topex data as well as other satellite altimeter data. The numerical computation result shows that the rms crossover discrepancies are reduced by an order of 1 cm when the Topex data is not fixed. Furthermore, the computed mean sea surface is less noisy and more realistic than that computed by the traditional procedure. 相似文献