共查询到20条相似文献，搜索用时 360 毫秒
1.
波浪与起伏水平板防波堤相互作用数值模拟 总被引：1，自引：1，他引：0
利用自主研发的基于紧致插值曲线CIP(constrained interpolation profile)方法的数学模型,开展规则波与起伏水平板防波堤相互作用的数值模拟研究。模型在笛卡尔直角坐标下建立,以CIP方法为流场基本求解器,分步求解Navier-Stokes方程,利用高精度的流体体积类型的THINC/SW (tangent of hyperbola for interface capturing with slope weighting)方法重构自由液面,采用浸入边界IBM(immersed boundary method)方法处理波浪与起伏板防波堤的耦合作用问题,通过动量源项造波方法模拟波浪的产生。重点关注波浪的浅水变形和板两端涡旋脱落的非线性现象,分析不同潜深、波要素下的板周围流场分布、板的运动响应和波浪的反透射系数。结果表明:起伏水平板主要通过能量反射、板上浅水变形和板两端的涡脱落消能,能有效减小板后波高,具有作为防波堤的可行性。 相似文献
2.
Floating structures are commonly seen in coastal and offshore engineering. They are often subjected to extreme waves and, therefore, their nonlinear dynamic behaviors are of great concern. In this paper, an in-house CFD code is developed to investigate the accurate prediction of nonlinear dynamic behaviors of a two-dimensional (2-D) box-shaped floating structure in focused waves. Computations are performed by an enhanced Constrained Interpolation Profile (CIP)-based Cartesian grid model, in which a more accurate VOF (Volume of Fluid) method, the THINC/SW scheme (THINC: tangent of hyperbola for interface capturing; SW: Slope Weighting), is used for interface capturing. A focusing wave theory is used for the focused wave generation. The wave component of constant steepness is chosen. Comparisons between predictions and physical measurements show good agreement including body motions and free surface profiles. Although the overall agreement is good, some discrepancies are observed for impact pressure on the superstructure due to water on deck. The effect of grid resolution on the results is checked. With a fine grid, no obvious improvement is seen in the global body motions and impact pressures due to water on deck. It is concluded that highly nonlinear phenomena, such as distorted free surface, large-amplitude body motions, and violent impact flow, have been predicted successfully. 相似文献
3.
The hydrodynamic performance of the oscillating water column type shoreline-mounted wave-power device is numerically studied within linear wave theory by using a boundary element method based on the Wehausen and Laitone 3D shallow water Green's function. In order to verify the numerical model, a 1:12 physical model with different bottom slopes was constructed and tested in a wave basin under regular wave conditions. The effects of the bottom slope on the hydrodynamic performance are investigated by both analytical and experimental methods. 相似文献
4.
This is the second of three papers on the modelling of various types of surf zone phenomena. In the first paper the general model was described and it was applied to study cross-shore motion of regular waves in the surf zone. In this paper, part II, we consider the cross-shore motion of wave groups and irregular waves with emphasis on shoaling, breaking and runup as well as the generation of surf beats. These phenomena are investigated numerically by using a time-domain Boussinesq type model, which resolves the primary wave motion as well as the long waves. As compared with the classical Boussinesq equations, the equations adopted here allow for improved linear dispersion characteristics and wave breaking is modelled by using a roller concept for spilling breakers. The swash zone is included by incorporating a moving shoreline boundary condition and radiation of short and long period waves from the offshore boundary is allowed by the use of absorbing sponge layers. Mutual interaction between short waves and long waves is inherent in the model. This allows, for example, for a general exchange of energy between triads rather than a simple one-way forcing of bound waves and for a substantial modification of bore celerities in the swash zone due to the presence of long waves. The model study is based mainly on incident bichromatic wave groups considering a range of mean frequencies, group frequencies, modulation rates, sea bed slopes and surf similarity parameters. Additionally, two cases of incident irregular waves are studied. The model results presented include transformation of surface elevations during shoaling, breaking and runup and the resulting shoreline oscillations. The low frequency motion induced by the primary-wave groups is determined at the shoreline and outside the surf zone by low-pass filtering and subsequent division into incident bound and free components and reflected free components. The model results are compared with laboratory experiments from the literature and the agreement is generally found to be very good. Finally the paper includes special details from the breaker model: time and space trajectories of surface rollers revealing the breakpoint oscillation and the speed of bores; envelopes of low-pass filtered radiation stress and surface elevation; sensitivity of surf beat to group frequency, modulation rate and bottom slope is investigated. Part III of this work (Sørensen et al., 1998) presents nearshore circulations induced by the breaking of unidirectional and multi-directional waves. 相似文献
5.
The problem of wave propagation in a fully nonlinear numerical wave tank is studied using desingularized boundary integral equation method coupled with mixed Eulerian–Lagrangian formulation. The present method is employed to solve the potential flow boundary value problem at each time step. The fourth-order predictor–corrector Adams–Bashforth–Moulton scheme is used for the time-stepping integration of the free surface boundary conditions. A damping layer near the end-wall of wave tank is added to absorb the outgoing waves with as little wave reflection back into the wave tank as possible. The saw-tooth instability is overcome via a five-point Chebyshev smoothing scheme. The model is applied to several wave propagations including solitary, irregular and random incident waves. 相似文献
6.
基于计算流体力学(CFD)数值模拟和物理模型试验结合的方式,开展涵洞式直立堤在波浪作用下的水体交换研究。CFD数值模拟采用VPM (volume-average/point-value method)-THINC (tangent of hyperbola for interface capturing)/QQ (quadratic surface representation and Gaussian quadrature)模型,并在此基础上提出一种能够标记涵洞内外水体变化的双液相流体体积模型(VOF)方法,定性及定量描述涵洞内外水体的交换特性;物理模型试验主要用来验证数值模型的准确性。研究表明,在波浪的作用下,涵洞内部会形成一股往复振荡的水流,对水体交换起到重要的作用。该振荡流主要受到涵洞高度、波浪周期以及波高的影响,涵洞深度对其影响不大。在波浪长时间的作用下,涵洞式直立堤能有效地增强港池内外水体交换。 相似文献
7.
《Coastal Engineering》2001,42(1):53-86
A numerical model is used to simulate wave breaking, the large scale water motions and turbulence induced by the breaking process. The model consists of a free surface model using the surface markers method combined with a three-dimensional model that solves the flow equations. The turbulence is described by large eddy simulation where the larger turbulent features are simulated by solving the flow equations, and the small scale turbulence that is not resolved by the flow model is represented by a sub-grid model. A simple Smagorinsky sub-grid model has been used for the present simulations. The incoming waves are specified by a flux boundary condition. The waves are approaching in the shore-normal direction and are breaking on a plane, constant slope beach. The first few wave periods are simulated by a two-dimensional model in the vertical plane normal to the beach line. The model describes the steepening and the overturning of the wave. At a given instant, the model domain is extended to three dimensions, and the two-dimensional flow field develops spontaneously three-dimensional flow features with turbulent eddies. After a few wave periods, stationary (periodic) conditions are achieved. The surface is still specified to be uniform in the transverse (alongshore) direction, and it is only the flow field that is three-dimensional.The turbulent structures are investigated under different breaker types, spilling, weak plungers and strong plungers. The model is able to reproduce complicated flow phenomena such as obliquely descending eddies. The turbulent kinetic energy is found by averaging over the transverse direction. In spilling breakers, the turbulence is generated in a series of eddies in the shear layer under the surface roller. After the passage of the roller the turbulence spreads downwards. In the strong plunging breaker, the turbulence originates to a large degree from the topologically generated vorticity. The turbulence generated at the plunge point is almost immediately distributed over the entire water depth by large organised vortices. Away from the bed, the length scale of the turbulence (the characteristic size of the eddies resolved by the model) is similar in the horizontal and the vertical direction. It is found to be of the order one half of the water depth. 相似文献
8.
A one-dimensional high-resolution finite volume model capable of simulating storm waves propagating in the coastal surf zone and overtopping a sea wall is presented. The model (AMAZON) is based on solving the non-linear shallow water (NLSW) equations. A modern upwind scheme of the Godunov-type using an HLL approximate Riemann solver is described which captures bore waves in both transcritical and supercritical flows. By employing a finite volume formulation, the method can be implemented on an irregular, structured, boundary-fitted computational mesh. The use of the NLSW equations to model wave overtopping is computationally efficient and practically flexible, though the detailed structure of wave breaking is of course ignored. It is shown that wave overtopping at a vertical wall may also be approximately modelled by representing the wall as a steep bed slope. The AMAZON model solutions have been compared with analytical solutions and laboratory data for wave overtopping at sloping and vertical seawalls and good agreement has been found. The model requires more verification tests for irregular waves before its application as a generic design tool. 相似文献
9.
A numerical model is developed by combining a porous flow model and a two-phase flow model to simulate wave transformation in porous structure and hydraulic performances of a composite type low-crest seawall. The structure consists of a wide submerged reef, a porous terrace at the top and an impermeable rear wall. The porous flow model is based on the extended Navier-Stokes equations for wave motion in porous media and k−ε turbulence equations. The two-phase flow model combines the water domain with the air zone of finite thickness above water surface. A unique solution domain is established by satisfying kinematic boundary condition at the interface of air and water. The free surface advection of water wave is modeled by the volume of fluid method with newly developed fluid advection algorithm. Comparison of computed and measured wave properties shows reasonably good agreement. The influence of terrace width and structure porosity is investigated based on numerical results. It is concluded that there exist optimum value of terrace width and porosity that can maximize hydraulic performances. The velocity distributions inside and in front of the structure are also investigated. 相似文献
10.
A two-dimensional numerical wave flume based on SA-MPLS method 总被引：1，自引：0，他引：1
A spatially adaptive(SA) two-dimensional(2-D) numerical wave flume is presented based on the quadtree mesh system,in which a new multiple particle level set(MPLS) method is proposed to solve the problem of interface tracking,in which common intersection may be traversed by multiple interfaces.By using the adaptive mesh technique and the MPLS method,mesh resolution is updated automatically with time according to flow characteristics in the modeling process with higher resolution around the free surface and the solid boundary and lower resolution in less important area.The model has good performance in saving computer memory and CPU time and is validated by computational examples of small amplitude wave,second-order Stokes wave and cnoidal wave.Computational results also indicate that standing wave and wave overtopping are also reasonably simulated by the model. 相似文献
11.
《Deep Sea Research Part I: Oceanographic Research Papers》2001,48(1):63-78
Internal bores are a common feature of tidally modulated two-layer exchange flows through straits and over sills. Even where the forcing changes smoothly, the flow may adjust with sudden jumps in the position of the interface between the two layers. The resulting flow configuration, with a hydraulically controlled exchange flow (at the sill) coupled with a propagating internal hydraulic jump (known as a bore), is investigated with mathematical models and laboratory experiments. The study concentrates on two-dimensional flow in a rectangular channel with a sill. The parameters considered are the depth of the channel compared to the depth over the sill, the depth of the interface before the passage of the bore and the strength of the net flux through the channel.The theory is based on shallow water equations and hydraulic control theory and includes the effects of a steady net flow through the channel (driven, for example, by the tide). Once the depth of the channel is twice the depth over the sill, further changes in geometry have relatively little effect on the flow. The bore velocity and fluxes are strongly affected by the strength of any net flow. The laboratory experiments model pure exchange flows (with no net flow) and give detailed information about the bores themselves. In many cases an undular bore is produced, with a well-defined wave train on the interface behind the front of the bore. The wavelengths and amplitudes of these internal waves are quantified and a brief comparison with similar internal waves observed in the Strait of Gibraltar is presented. 相似文献
12.
Based on the integral equation transformed from three dimensional Laplace equation and by the adoption of the division manner of sub- region boundary element method, the numerical computations of the velocity potential of each sub-region are given considering the continuity conditions of potential and normal derivatives at the interface of sub-regions. Therefore, computation of wave deformation in offshore flow field is realized. The present numerical model provides a good solution for the application of boundary element method to the calculation of wave deformation in large areas. 相似文献
13.
Dong Guohai Li Yucheng Wang Yongxue
Lecturer Doctor Dalian University of Technology Dalian
Professor Dalian University of Technology Dalian 《中国海洋工程》1995,(1)
- A large amount of experimental analysis and systematical theoretical calculation has been done by the authors to solve the problem of wave transformation and breaking, considering the effect of both current and topography, but only the wave energy loss due to spilling breaker in the surf zone has been discussed in this paper. Based on test result analysis and calculation with the Stream Function Wave Theory, the wave velocity field at breaking points has been obtained, and it is used to calculate the wave heights after breaking by the VOF (Volume of Fluid) method, in which the governing equations are continuity equation and Navier-Stokes Equation for imcompressible fluids. In the present paper, the improved VOF technique is used to calculate the wave heights of stable regular waves after breaking. Results fit the test data well, which shows that the VOF method is suitable to numerical simulation of regular waves after breaking. Besides, the breaker coefficient B of regular waves in the bore model is a 相似文献
14.
A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment. 相似文献
15.
The interaction of obliquely incident surface gravity waves with a vertical flexible permeable submerged membrane wave barrier is investigated in the context of three-dimensional linear water wave theory. From the general formulation of the submerged membrane barrier, the performance of bottom-standing, surface-piercing and fully extended membrane wave barriers are analyzed for various values of wave and structural parameters. The analytic solution of the physical problem is obtained using eigenfunction expansion method and a coupled boundary element-finite difference method has been used to get the numerical solution. In the boundary element method, since the boundary condition on the membrane barrier is not known a priori, the membrane response and velocity potentials are solved simultaneously using appropriate discretization with the help of finite difference scheme. The convergence of the analytic and numerical solution techniques is discussed. The study reveals that for suitable combination of wave and structural parameters, approximately (45–50)% incident wave energy can be dissipated irrespective of membrane barrier configurations. Further, in certain situations, nearly full wave reflection and zero transmission occur for all barrier configurations. The study will be useful in the design of flexible permeable membrane to act as an effective wave barrier for creation of tranquility zone in the marine environment. 相似文献
16.
为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。 相似文献
17.
The transport of a chemical species under the pure action of surface progressive waves in the benthic boundary layer which is loaded with dense suspended sediments is studied theoretically. The flow structure of the boundary layer is approximated by that of a two-layer Stokes boundary layer with a sharp interface between clear water and a heavy fluid. The simplest model of constant eddy diffusivities is adopted and the exchange of matter with the bed is ignored. For a thin layer of heavy fluid, whose thickness is comparable to the surface wave amplitude and the Stokes boundary layer thickness, effective transport equations are deduced using an averaging technique based on the method of homogenization. The effective advection velocity is found to be equal to the depth-averaged mass transport velocity, while the dispersion coefficient can be shown to be positive definite. Explicit expressions for the transport coefficients are obtained as functions of fluid properties and flow kinematics. Physical discussions on their relations are also presented. 相似文献
18.
In an attempt to elucidate the mechanics of deep-water wave breaking, a variety of breaking waves, including spilling and plunging waves, of different length scales and geometries was studied. The waves were generated through wave-wave interactions using wave packets with constant-steepness components, constant-amplitude components, and also components following the Pierson-Moskowitz distribution. Wave steepening prior to breaking were found to cause an increase in the high frequency spectral slope of the wave spectrum. The slopes were correlated to the type of breaking and the intensity of the breaking. The energy loss through breaking varied with the spectral characteristics of the wave packet. On the other hand, it was also noted that, irrespective of the wave packet, the losses were from the higher frequency end of the first harmonics. 相似文献
19.
A depth-integrated, non-hydrostatic model with hybrid finite difference and finite volume numerical algorithm is proposed in this paper. By utilizing a fraction step method, the governing equations are decomposed into hydrostatic and non-hydrostatic parts. The first part is solved by using the finite volume conservative discretization method, whilst the latter is considered by solving discretized Poisson-type equations with the finite difference method. The second-order accuracy, both in time and space, of the finite volume scheme is achieved by using an explicit predictor-correction step and linear construction of variable state in cells. The fluxes across the cell faces are computed in a Godunov-based manner by using MUSTA scheme. Slope and flux limiting technique is used to equip the algorithm with total variation dimensioning property for shock capturing purpose. Wave breaking is treated as a shock by switching off the non-hydrostatic pressure in the steep wave front locally. The model deals with moving wet/dry front in a simple way. Numerical experiments are conducted to verify the proposed model. 相似文献
20.
The performance of interFoam (a widely used solver within OpenFOAM package) in simulating the propagation of water waves has been reported to be sensitive to the temporal and spatial resolution. To facilitate more accurate simulations, a numerical wave tank is built based on a Navier–Stokes model, which employs the VPM (volume-average/point-value multi-moment) scheme as the fluid solver and the THINC/QQ method (THINC method with quadratic surface representation and Gaussian quadrature) for the free-surface capturing. Simulations of regular waves in an intermediate water depth are conducted and the results are assessed via comparing with the analytical solutions. The performance of the present model and interFoam solver in simulating the wave propagation is systematically compared in this work. The results clearly demonstrate that compared with interFoam solver, the present model significantly improves the dissipation properties of the propagating wave, where the waveforms as well as the velocity distribution can be substantially maintained while the waves propagating over long distances even with large time steps and coarse grids. It is also shown that the present model requires much less computation time to reach a given error level in comparison with interFoam solver. 相似文献